Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

NIMROD calculations of energetic particle driven toroidal Alfvén eigenmodes

Toroidal Alfvén eigenmodes (TAEs) are gap modes induced by the toroidicity of tokamak plasmas in the absence of continuum damping. They can be excited by energetic particles (EPs) when the EP drive exceeds other dampings, such as electron and ion Landau damping, and collisional and radiative damping. A TAE benchmark case, which was proposed by the International Tokamak Physics Activity group, is studied in this work. The numerical calculations of linear growth of TAEs driven by EPs in a circular-shaped, large aspect ratio tokamak have been performed using the Hybrid Kinetic-MHD (HK-MHD) model implemented in the NIMROD code. This HK-MHD model couples a δf particle-in-cell representation of EPs with the 3D MHD representation of the bulk plasma through moment closure for the momentum conservation equation. Both the excitation of TAEs and their transition to energetic particle modes (EPMs) have been observed. The influence of EP density, temperature, density gradient, and position of the maximum relative density gradient, on the frequency and the growth rate of TAEs are obtained, which are consistent with those from the eigen-analysis calculations, kinetic-MHD, and gyrokinetic simulations for an initial Maxwellian distribution of EPs. The relative pressure gradient of EP at the radial location of the TAE gap, which represents the drive strength of EPs, can strongly affect the growth rate of TAEs. Here, it is demonstrated that the mode transition due to EP drive variation leads to not only the change of frequency but also the change of the mode structure. This mechanism can be helpful in understanding the nonlinear physics of TAE/EPM, such as frequency chirping.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simultaneous diagnosis of radial profiles and mix in NIF ignition-scale implosions via X-ray spectroscopy

In a National Ignition Facility implosion, hydrodynamic instabilities may cause the cold material from the imploding shell to be injected into the hot-spot (hot-spot mix), enhancing the radiative and conductive losses, which in turn may lead to a quenching of the ignition process. The bound-bound features of the spectrum emitted by high-Z ablator dopants that get mixed into the hot-spot have been previously used to infer the total amount of mixed mass; however, the typical errorbars are larger than the maximum tolerable mix. We present in this paper an improved 2D model for mix spectroscopy which can be used to retrieve information on both the amount of mixed mass and the full imploded plasma profile. By performing radiation transfer and simultaneously fitting all of the features exhibited by the spectra, we are able to constrain self-consistently the effect of the opacity of the external layers of the target on the emission, thus improving the accuracy of the inferred mixed mass. The model's predictive capabilities are first validated by fitting simulated spectra arising from fully characterized hydrodynamic simulations, and then, the model is applied to previously published experimental results, providing values of mix mass in agreement with previous estimates. Finally, we show that the new self consistent procedure leads to better constrained estimates of mix and also provides insight into the sensitivity of the hot-spot spectroscopy to the spatial properties of the imploded capsule, such as the in-flight aspect ratio of the cold fuel surrounding the hotspot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of reduced secondary electron emission yield from a foam or fuzz surface

Complex structures on a material surface can significantly reduce the total secondary electron emission yield from that surface. A foam or fuzz is a solid surface above which is placed a layer of isotropically aligned whiskers. Primary electrons that penetrate into this layer produce secondary electrons that become trapped and do not escape into the bulk plasma. In this manner the secondary electron yield (SEY) may be reduced. We developed an analytic model and conducted numerical simulations of secondary electron emission from a foam to determine the extent of SEY reduction. We find that the relevant condition for SEY minimization is $\bar{u}$≡AD/2>>1 while D <<1, where D is the volume fill fraction and A is the aspect ratio of the whisker layer, the ratio of the thickness of the layer to the radius of the fibers. As a result, we find that foam cannot reduce the SEY from a surface to less than 0.3 of its flat value.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas

A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. Our method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. We could use large aspect ratio rectangular capillaries to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geometric scalings for the electrostatically driven helical plasma state

A new plasma state has been investigated [Akcay et al., Phys. Plasmas 24, 052503 (2017)], with a uniform applied axial magnetic field in a periodic cylinder of length $L=2πR$, driven by helical electrodes. The drive is single helicity, depending on $mθ+kz=mθ-nζ$, where $ζ=z/R$ and $k=-n/R$. For strong $(m,n)=(1,1)$ drive, the state was found to have a strong axial mean current density, with a mean-field safety factor $q_0(r)$ just above the pitch of the electrodes $m/n=1$ in the interior. This state has possible applications to DC electrical transformers and tailoring of the current profile in tokamaks. Here, we study two geometric issues of interest for these applications: (i) scaling of properties with the plasma length or aspect ratio and (ii) behavior for different helicities, specifically $(m,n)=(1,n)$ for n > and $(m,n)=(2,1)$.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-inductively driven tokamak plasmas at near-unity β t in the Pegasus toroidal experiment

A major goal of the spherical tokamak (ST) research program is accessing a state of low internal inductance ℓ i , high elongation &#x3BA; , and high toroidal and normalized beta ( β t and β N ) without solenoidal current drive. Local helicity injection (LHI) in the Pegasus ST [Garstka et al., Nucl. Fusion 46, S603 (2006)] provides non-solenoidally driven plasmas that exhibit these characteristics. LHI utilizes compact, edge-localized current sources for plasma startup and sustainment. It results in hollow current density profiles with low ℓ i . The low aspect ratio ( R 0 / a ~ 1.2 ) of Pegasus allows access to high κ and high normalized plasma currents I N = I p / a B T > 14 ). Magnetic reconnection during LHI provides auxiliary ion heating. Together, these features provide access to very high β t plasmas. Equilibrium analyses indicate that β t up to ~100% is achieved. Finally, these high β t discharges disrupt at the ideal no-wall β limit at β N ~ 7.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increasing stagnation pressure and thermonuclear performance of inertial confinement fusion capsules by the introduction of a high-Z dopant

Inertial confinement fusion requires the inertia of the imploding mass to provide the necessary confinement such that the core reaches adequate high density, temperature, and pressure. Studies utilize low-Z capsules filled with hydrogenic fuel, which are subject to multiple instabilities at the interfaces during the implosion. To improve the stability of the fuel:capsule interface and narrow the imploding shell profile, capsules are doped with a small atomic percentage of a high-Z material. A series of recent indirect-drive experiments executed at the National Ignition Facility with tungsten-doped high density carbon capsules has demonstrated that the presence of this dopant serves to increase the in-flight aspect ratio of the shell and increase the compression and neutron yield performance of both gas-filled and deuterium-tritium cryogenically layered targets. These experiments definitively show that benefits accrued by the introduction of a high-Z dopant into the capsule can outweigh the detrimentally reduced stability of the ablation front, avoiding shell breakup or significant radiative cooling of the hot spot. Future experiments will utilize these types of capsules to additionally increase nuclear performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mitigation of cross-beam energy transfer in ignition-scale polar-direct-drive target designs for the National Ignition Facility

Two novel target designs are presented for using direct laser ablation (direct drive) at the National Ignition Facility to assemble and ignite cryogenic fuel using the existing indirect-drive beam configuration. These are the first ignition-relevant “polar” direct-drive target designs to include the physical effects of cross-beam energy transfer (CBET) between laser beams and nonlocal electron heat transport. A wavelength-detuning strategy is used to increase absorption and reduce scattered-light losses caused by CBET, allowing for ignition-relevant implosion velocities. Two designs are described: a moderate-adiabat sub-ignition alpha-burning design with a D–T neutron fusion yield of 1.2 × 10 17 and a lower-adiabat ignition design with a gain of 27. Lastly, both designs have moderate in-flight aspect ratios, indicating acceptable levels of hydrodynamic instability during the implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strongly localized magnetic reconnection by the super-Alfvénic shear flow

We demonstrate that the dragging of the magnetic field by the super-Alfvénic shear flows out of the reconnection plane can strongly localize the reconnection x-line in collisionless pair plasmas, reversing the current direction at the x-line. Reconnection with this new morphology, which is impossible in resistive-magnetohydrodynamics, is enabled by the particle inertia. Surprisingly, the quasi-steady reconnection rate remains of order 0.1 even though the aspect ratio of the local x-line geometry is larger than unity, which completely excludes the role of tearing physics. Here, we explain this by examining the transport of the reconnected magnetic flux and the opening angle made by the upstream magnetic field, concluding that the reconnection rate is still limited by the constraint imposed at the inflow region. Based on these findings, we propose that this often observed fast rate value of order 0.1 itself, in general, is an upper bound value determined by the upstream constraint, independent of the localization mechanism and dissipation therein.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Paschen's curve in microgaps with an electrode surface protrusion

Paschen's curve in microgaps with a hemi-ellipsoidal protrusion on the electrode surface is examined using a two-dimensional fluid model. The breakdown voltage is identified when the discharge enters the subnormal region, according to voltage-current characteristics. It is discovered that the breakdown in a microgap with a surface protrusion on the electrode can result in a combined Paschen's curve, which transits from long-gap (distance between the cathode and anode without the presence of protrusion) behavior at low pressure to short-gap (distance between the protrusion apex to the opposite electrode) behavior at high pressure. As gas pressure decreases, the length of the optimal discharge path increases, automatically moving from the top of the protrusion to its side surface and then to the wider non-protrusion electrode gap. The effects of the protrusion height and radius as well as the discharge polarity on the Paschen's curve are viewed in detail. The effects of the protrusion aspect ratio on field enhancement are also considered. Our report provides insights into the design of microgaps with controlled breakdown voltage across many orders in pressure via engineered electrode morphology.

42 ENGINEERING↗

Experimental investigation of cross flow mixing in a randomly packed bed and streamwise vortex characteristics using particle image velocimetry and proper orthogonal decomposition analysis

The study of flow and heat transfer through porous media or randomly packed beds is important as these configurations are widely used in many engineering applications, for example, heat energy storage, chemical catalytic reactors, and nuclear reactors. The flow mixing characteristics in a cross-flow plane of a facility with randomly packed spheres at an aspect ratio of 6.3 were experimentally investigated. The velocity fields at several regions of the cross-flow plane located in the vicinity of the wall and in the pores between spheres were obtained by applying the matched-index-of-refraction and time-resolved particle image velocimetry (TR-PIV) techniques for Reynolds numbers ranging from 700 to 1700. The TR-PIV results revealed various flow patterns in the transverse plane of the packed spheres, including swirling flow structures aligned with the axial flow direction, a strong bypass flow near the enclosure wall, and a circulation region created when the bypass flow ejected into a large spatial gap. When the Reynolds number was increased, the peaks of root-mean-square fluctuating velocities, $u'_{rms}$ and $v'_{rms}$, were found to increase approximately at the same ratio as the increase in Reynolds number, and the magnitude of the Reynolds stress increased considerably. In addition, the characteristics of flow mixing in different flow regions were investigated via the two-point cross-correlation of fluctuating velocities. Using Taylor’s hypothesis, the vorticity iso-surfaces were constructed. Thus, constructed iso-surfaces showed that shear layers generated from the bypass flow gaps were stretched, broken into smaller flow structures, and then evolved as vortex pairs when entering the neighboring gaps. The results obtained by applying proper orthogonal decomposition (POD) analysis to the velocity fields showed that the statistically dominant flow structures had approximately the same size and shape as those depicted by Taylor’s hypothesis. Vortex characteristics, such as populations, spatial distributions, and strengths, for various spatial regions and Reynolds numbers were obtained by a combination of POD analysis and vortex identification.

42 ENGINEERING↗

High-temperature stable refractory nanoneedles with over 99% solar absorptance

Solar absorber coatings have widely been investigated for solar-thermal technologies including concentrated solar power and solar thermochemistry. While various nanostructures such as nanowires and nanotubes have been commonly used for high solar absorptance owing to their potent light trapping effect, the high temperature stability of these nanostructures has yet to be established due to either coarsening of nanostructures or oxidation of certain materials in air (e.g., Si and C). In this work, we developed a nanostructured solar absorber from a family of high-temperature refractory spinel oxides, Co 3 O 4 and CuCo 2 O 4 , with ultra-high solar absorptance over 99%. Once coated with a thin layer of HfO 2 or SiO 2 through atomic layer deposition, the Co 3 O 4 and CuCo 2 O 4 nanoneedles preserve their high aspect ratio and sharp tips, allowing the solar absorbers to maintain the superior absorptivity and excellent thermal stability at an elevated temperature for an extended period (650 °C and 800 °C for 100 h for passivated Co 3 O 4 and Cu 1 Co 2 O 4 , respectively). These results suggest that solar absorbers made from refractory spinel oxide nanoneedles can be used for high-temperature solar thermal applications with ultrahigh absorptance.

14 SOLAR ENERGY↗

Theory of electron transport and emission from a semiconductor nanotip

An sufficient mass based model accounting for the conduction band quantization in a high aspect ratio semiconductor nanotip is developed to describe injected electron transport and subsequent electron emission from the nanotip. A transfer matrix formalism is used to treat electron scattering induced by the variation in the tip diameter and in the electron emission. Numerical assessment of the scattering and emission probabilities is performed for the diamond parametrized nanotip model. Our scattering and emission models are further combined with a Monte Carlo (MC) approach to simulate electron transport through the nanotip. The MC simulations, additionally accounting for the electron-phonon scattering and externally applied electric field, are performed for a minimal nanotip model and an equivalent width diamond slab. An effect of the level quantization, electron scattering due to the nanotip diameter variation, and electron-phonon scattering on the nanotip emission properties are identified and compared with the case of a bulk slab.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of plasmoid formation on sawtooth process in a tokamak

For realistic values of the Lundquist number in tokamak plasmas, 1/1 magnetic islands lead to the formation of a secondary thin current sheet, which breaks up into a chain of small magnetic islands, called plasmoids. The role of plasmoid dynamics during the sawtooth reconnection process in fusion plasmas remains an unresolved issue. In this study, systematic simulations are performed to investigate the resistive internal kink mode using the full resistive magnetohydrodynamics equations implemented in the NIMROD code in a simplified tokamak geometry. For Lundquist number S≥1.6×10 7 , the secondary current sheet is found to be unstable to plasmoids during the nonlinear resistive kink mode evolution with a critical aspect ratio of the current sheet of ~70. The merging of small plasmoids leads to the formation of a monster plasmoid that can significantly affect the primary island evolution. This may provide an explanation for the partial reconnection observed in sawtooth experiments.

Computer simulation↗

Laboratory measurements of geometrical effects in the x-ray emission of optically thick lines for ICF diagnostics

Understanding the effects of radiative transfer in High Energy Density Physics experiments is critical for the characterization of the thermodynamic properties of highly ionized matter, in particular in Inertial Confinement Fusion (ICF). In this paper, we report on non-Local Thermodynamic Equilibrium experiments on cylindrical targets carried out at the Omega Laser Facility at the Laboratory for Laser Energetics, Rochester NY, which aim to characterize these effects. In these experiments, a 50/50 mixture of iron and vanadium, with a thickness of 2000 Å and a diameter of 250 μm, is contained within a beryllium tamper, with a thickness of 10 μm and a diameter of 1000 μm. Each side of the beryllium tamper is then irradiated using 18 of the 60 Omega beams with an intensity of roughly 3 × 10 14 W cm -2 per side, over a duration of 3 ns. Spectroscopic measurements show that a plasma temperature on the order of 2 keV was produced. Imaging data show that the plasma remains cylindrical, with geometrical aspect ratios (quotient between the height and the radius of the cylinder) from 0.4 to 2.0. The temperatures in this experiment were kept sufficiently low (~1–2 keV) so that the optically thin Li-like satellite emission could be used for temperature diagnosis. This allowed for the characterization of optical-depth-dependent geometric effects in the vanadium line emission. Lastly, simulations present good agreement with the data, which allows this study to benchmark these effects in order to take them into account to deduce temperature and density in future ICF experiments, such as those performed at the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design considerations for three-dimensional betavoltaics

Betavoltaic devices are suitable for delivering low-power over periods of years. Typically, their power density is on the order of nano to micro-Watts per cubic centimeter. In this work we evaluate the potential for using high-aspect ratio three-dimensional semiconductor structures to enhance the power and efficiency of these devices. The Monte Carlo transport code MCNP6 is used to provide realistic estimates of the theoretical levels of charge generation, which is in turn used to make predictions about the power output from three-dimensional betavoltaics. The focus of this work is on silicon and promethium-147, but other semiconductors and radioisotopes are considered as well. In the case of silicon diodes with three-dimensional features that are comparable to what is commercially available we estimate that power densities in the range of 20-25 mW/cm 3 can be achieved at efficiencies of 2.9-5.8% when coupled with promethium-147 oxide.

25 ENERGY STORAGE↗

Global geodesic acoustic mode in an ideal magnetohydrodynamic tokamak plasma

A concise and transparent second order ordinary differential equation (ODE) describing the radial structure of the global geodesic acoustic mode (GAM) is analytically presented in a low-β tokamak plasma. The large-aspect-ratio and circular cross section are assumed to linearize the ideal magnetohydrodynamic equations. We show clearly how finite β-dependent terms affect the global GAM frequency and radial mode structure. Here, a typical Wentzel–Kramers–Brillouin form of solution is found for some reversed shear equilibria. For some other equilibria with lower β, even also in a reversed shear tokamak, the GAM continuum is upraised by the high order β-dependent terms so that its maximum is beyond ω G , where ω G is the classical local frequency of GAM. As a result, no self-consistent solution to the ODE can be found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Air-transfer production method for large-area picosecond photodetectors

We have designed and prototyped the process steps for the batch production of large-area micro-channel-plate photomultipliers (MCPPMT) using the “air-transfer” assembly process developed with single LAPPD TM modules. Results are presented addressing the challenges of designing a robust package that can transmit large numbers of electrical signals for pad or strip readout from inside the vacuum tube and of hermetically sealing the large-perimeter window–body interface. We have also synthesized a photocathode in a large-area low-aspect-ratio volume and have shown that the micro-channel plates recover their functionality after cathode synthesis. These steps inform a design for a multi-module batch facility employing dual nested low-vacuum and ultra-high-vacuum systems in a small-footprint. The facility design provides full access to multiple MCP-PMT modules prior to hermetic pinch-off for leak-checking and real-time photocathode optimization.

47 OTHER INSTRUMENTATION↗