Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Composite Fermions: Motivation, Successes, and Application to Fractional Quantum Hall Effect in Graphene

The fractional quantum Hall effect (FQHE) is one of the most amazing collective states discovered in modern times. A remarkably detailed and accurate understanding of its nonperturbative physics has been achieved in terms of a new class of exotic particles called composite fermions. I will begin with a brief review of the composite fermion theory and its outstanding successes. The rest of the talk will be concerned with fractional quantum Hall effect in graphene, observed recently. I will present results of theoretical studies that demonstrate that composite fermions are formed in graphene as well, but the spin and valley degeneracies and the linear dispersion of electrons produce interesting new physics relative to that in the usual two-dimensional GaAs systems. Composite fermion theory allows detailed predictions about FQHE in graphene in regimes when either or both of the spin and valley degeneracies are broken. I will discuss the relevance of our theory to recent experiments. This work on FQHE in graphene has been performed in collaboration with Csaba Toke.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum States Probed By Temperature Dependence Capacitance-Voltage Measurements For InP/GaAs Type-II Ultrathin Quantum Well

We report on the temperature dependent capacitance-voltage measurements on InP/GaAs ultrathin quantum well (QW). We observe a peak in apparent carrier distribution (ACD) profile at around the geometrical position of the QW. Peak value of the ACD profile increases, while it's width decreases with reducing temperature indicating that the peak in ACD is due to the accumulation of two dimensional electrons occupying the quantum states in ultrathin QW.

36 MATERIALS SCIENCE↗

Raman study of strained Ge{sub 1-x}Sn{sub x} alloys

The Ge-Ge longitudinal optical Raman peak has been measured in strained Ge{sub 1-x}Sn{sub x} alloy layers grown on top of relaxed In{sub y}Ga{sub 1-y}As buffer layers on GaAs substrates by molecular beam epitaxy. The experimental result shows that the peak frequency shift increases linearly from the value for bulk Ge with the Sn fraction x and the strain {epsilon}, {Delta}{omega} {omega}- {omega}{sub Ge} = ax + b{epsilon}. In these experiments alloy and strain contributions are decoupled and measured separately, and a and b are determined to be a = - 82 {+-} 4 cm{sup -1} and b = - 563 {+-} 34 cm{sup -1}, over the entire composition and strain range investigated.

36 MATERIALS SCIENCE↗

Azimuthal reflection high-energy electron diffraction study of MnAs growth on GaAs(001) by molecular beam epitaxy

Azimuthal reflection high-energy electron diffraction (ARHEED) and in situ grazing incidence synchrotron x-ray diffraction techniques are employed to investigate the growth, epitaxial orientation, and interfacial structure of MnAs layers grown on GaAs(001) by molecular beam epitaxy (MBE). We demonstrate the power and reliability of ARHEED scans as a routine tool in characterizing the formation of epitaxial films. The ARHEED scans clearly reveal the formation of the rectangular MnAs unit cell during growth on GaAs(001) for a MnAs layer thickness of 2.1 {+-} 0.2 monolayers with a tensile strain along the MnAs[1120] direction. A periodic coincidence site lattice, which is known to form along the MnAs [0001] direction to release the strain due to the huge lattice mismatch ({approx}30%) also produces periodic satellites of the diffraction spots in the ARHEED scan. The formation of different epitaxial orientations of MnAs during MBE growth can be directly observed using ARHEED scans. ARHEED is demonstrated to have a resolution similar to synchrotron x-ray diffraction with a double crystal monochromator, yielding full width at half maximum values of reflections as small as 0.005 reciprocal lattice units.

36 MATERIALS SCIENCE↗

InGaAs/GaAs (110) quantum dot formation via step meandering

InGaAs (110) semiconductor quantum dots (QDs) offer very promising prospects as a material base for a new generation of high-speed spintronic devices, such as single electron transistors for quantum computing. However, the spontaneous formation of InGaAs QDs is prevented by two-dimensional (2D) layer-by-layer growth on singular GaAs (110) substrates. In this work we have studied, by using atomic force microscopy and photoluminescence spectroscopy (PL), the growth of InGaAs/GaAs QDs on GaAs (110) stepped substrates by molecular beam epitaxy (MBE), and the modification of the adatom incorporation kinetics to surface steps in the presence of chemisorbed atomic hydrogen. The as-grown QDs exhibit lateral dimensions below 100 nm and emission peaks in the 1.35-1.37 eV range. It has been found that a step meandering instability derived from the preferential attachment of In adatoms to [110]-step edges relative to [11n]-type steps plays a key role in the destabilization of 2D growth that leads to 3D mound formation on both conventional and H-terminated vicinal substrates. In the latter case, the driving force for 3D growth via step meandering is enhanced by H-induced upward mass transport in addition to the lower energy cost associated with island formation on H-terminated substrates, which results in a high density array of InGaAs/GaAs dots selectively nucleated on the terrace apices with reduced lateral dimensions and improved PL efficiency relative to those of conventional MBE-grown samples.

36 MATERIALS SCIENCE↗

Temperature-dependent energy band gap variation in self-organized InAs quantum dots

We investigated the temperature-dependent variation of the photoluminescence emission energy of self-organized InAs/GaAs quantum dots (QDs) grown by conventional Stranski-Krastanov (SK) molecular beam epitaxy and migration-enhanced molecular beam epitaxy (MEMBE) and that of MEMBE InAs QDs in a symmetric and an asymmetric In{sub 0.2}Ga{sub 0.8}As/GaAs well. The temperature-dependent energy variation of each QD is analyzed in low and high temperature regions, including a sigmoidal behavior of conventional SK quantum dots with the well-known Varshni and semi-empirical Fan models.

36 MATERIALS SCIENCE↗

Isotropic Hall effect and ''freeze-in'' of carriers in the InGaAs self-assembled quantum wires

Using molecular beam epitaxy, we prepared an anisotropic media consisting of InGaAs quantum wires epitaxially grown on GaAs (311)A. Anisotropy is observed in the lateral conductivity and photoluminescence polarization. However, an isotropic Hall effect is observed in the same samples. We show that the Hall effect in this anisotropic heterostructure remains isotropic regardless of the change of the doping in GaAs barriers and regardless of the InGaAs coverage, whereas the conductivity anisotropy experiences a strong change under these actions. In addition, we observed an anomalous increase in carrier density, ''freeze-in,'' at low temperatures. In order to explain this, we generalized the theory of Look [D. C. Look, Phys. Rev B 42, 3578 (1990)] by considering the low field magneto-transport in anisotropic media. This theory confirms that the Hall constant remains isotropic in anisotropic semiconductor heterostructures, agreeing with our experiment and explains the anomalous behavior of carriers as a result of multi-band conductivity.

36 MATERIALS SCIENCE↗

Analytical Study of BAM (Al/GaAs) and Photovoltaic Samples Using State-of-The-Art Auger Nanoprobes

For the analysis of certified semiconducting Al{sub 0.7}Ga{sub 0.3}As/GaAs superlattices and photovoltaic samples, we used new generations Auger nano-probes such as the JEOL JAMP-9500F Field emission Microprobe and the PHI-700 Xi system. These nano-probes are generally used for the chemical analysis of complex nano-structures at the deca-nanometric scale. In this paper, we first used both systems for the determination of the surface composition of an Al{sub 0.7}Ga{sub 0.3}As/GaAs reference sample. In that, we studied the impact of surface topography on the Auger analysis. Secondly, we used both systems for chemical analysis of photovoltaic samples. Here, we investigated the in-depth chemical composition, in particular the a-Si:H (n)/ZnO/Al and ITO/a-Si:H (p) interfaces, after a specific cross-section preparation. However, limitations such as image drift due to acoustic vibration and heating effects due to continuous bombardment of energetic electrons at the same point are still a big challenge for quick, routine analysis.

36 MATERIALS SCIENCE↗

Mid-infrared pump-related electric-field domains in GaAs/(Al,Ga)As quantum-cascade structures for terahertz lasing without population inversion

We investigate the effect of mid-infrared (MIR) pumping on the transport properties of GaAs/(Al,Ga)As terahertz (THz) quantum lasers (TQLs), which rely on quantum coherence effects of intersubband transitions. Aiming at THz lasing at elevated temperatures, we extend the concept of THz gain with and without population inversion of a single, MIR-pumped, electrically driven THz stage proposed by Waldmueller et al.[Phys. Rev. Lett. 99, 117401 (2007)] to an entire TQL. However, experiments using a CO{sub 2} as well as a free-electron laser and numerical simulations show that this resonant MIR pumping causes a negative differential conductivity (NDC) in addition to the NDC caused by sequential tunneling. Lasing of these TQLs is prevented by the formation of electric-field domains below the resonance field strength for gain of each single THz stage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quick measurement of crystal truncation rod profiles in simultaneous multi-wavelength dispersive mode

To conduct time-resolved measurements in the wide momentum transfer (q = 4{pi} sin{theta}/{lambda}, {theta}: the glancing angle of the x-ray beam, {lambda}: x-ray wavelength) range of interest, we developed a method that can simultaneously measure the whole profile of x-ray diffraction and crystal truncation rod scattering of interest with no need of rotation of the specimen, detector, and monochromator crystal during the measurement. With a curved crystal polychromator (Si 111 diffraction), a horizontally convergent x-ray beam having a one-to-one correlation between wavelength (energy: 16.24-23.0 keV) and direction is produced. The convergent x-ray beam components of different wavelengths are incident on the specimen in a geometry where {theta} is the same for all the x-ray components and are diffracted within corresponding vertical scattering planes by a specimen ([GaAs(12ML)/AlAs(8 ML)]{sub 50} on GaAs(001) substrate) placed at the focal point. Although {theta} is the same for all the directions, q continuously varies because {lambda} changes as a function of direction. The normalized horizontal intensity distribution across the beam, as measured using a two-dimensional pixel array detector downstream of the specimen, represents the reflectivity curve profile both near to and far from the Bragg point. As for the crystal truncation rod scattering around the 002 reflection, the diffraction profile from the Bragg peak down to reflectivity of 1.0 x 10{sup -9} was measured with a sufficient data collection time (1000-2000 s). With data collection times of 100, 10, 1.0, and 0.1 s, profiles down to a reflectivity of {approx}6 x 10{sup -9}, {approx}2 x 10{sup -8}, {approx}8 x 10{sup -8}, and {approx}8 x 10{sup -7} were measured, respectively. To demonstrate the time-resolving capability of the system, reflectivity curves were measured with time resolutions of 1.0 s while rotating the specimen. We have also measured the diffraction profile around the 113 reflection in the non-specular reflection geometry.

36 MATERIALS SCIENCE↗

X-ray reciprocal space mapping of dislocation-mediated strain relaxation during InGaAs/GaAs(001) epitaxial growth

Dislocation-mediated strain relaxation during lattice-mismatched InGaAs/GaAs(001) heteroepitaxy was studied through in situ x-ray reciprocal space mapping (in situ RSM). At the synchrotron radiation facility SPring-8, a hybrid system of molecular beam epitaxy and x-ray diffractometry with a two-dimensional detector enabled us to perform in situ RSM at high-speed and high-resolution. Using this experimental setup, four results in terms of film properties were simultaneously extracted as functions of film thickness. These were the lattice constants, the diffraction broadenings along in-plane and out-of-plane directions, and the diffuse scattering. Based on correlations among these results, the strain relaxation processes were classified into four thickness ranges with different dislocation behavior. In addition, the existence of transition regimes between the thickness ranges was identified. Finally, the dominant dislocation behavior corresponding to each of the four thickness ranges and transition regimes was noted.

36 MATERIALS SCIENCE↗

Magnetic Field Modulated Photoreflectance Study of the Electron Effective Mass in Dilute Nitride Semiconductors

Magnetic field modulated photoreflectance measurements are performed on the dilute nitride semiconductor Ga(AsN) in quantizing magnetic fields. From the measured cyclotron energies, the conduction band effective mass and its dependence on the nitrogen content are determined. The effective mass is found to become significantly heavier in samples with high nitrogen composition (>0.1%).

36 MATERIALS SCIENCE↗

Temperature dependence of the dielectric response of AlSb

Spectroscopic ellipometry was used to determine the optical response of an intrinsic AlSb film as a function of temperature. The 1.5 {mu}m thick film was grown on a (001) GaAs substrate by molecular beam epitaxy. Measurements were done at temperatures from 300 K to the growth temperature of 800 K over a spectral range of 0.7 to 5.0 eV. To avoid oxidation artifacts, measurements were done with the film in situ. The data were analyzed using a parametric semiconductor model for its temperature dependence.

36 MATERIALS SCIENCE↗

III-V Nanowire Array Growth by Selective Area Epitaxy

III-V semiconductor nanowires are unique material phase due to their high aspect ratio, large surface area, and strong quantum confinement. This affords the opportunity to control charge transport and optical properties for electrical and photonic applications. Nanoscale selective area metalorganic chemical vapor deposition growth (NS-SAG) is a promising technique to maximize control of nanowire diameter and position, which are essential for device application. In this work, InP and GaAs nanowire arrays are grown by NS-SAG. We observe enhanced sidewall growth and array uniformity disorder in high growth rate condition. Disorder in surface morphology and array uniformity of InP nanowire array is explained by enhanced growth on the sidewall and stacking faults. We also find that AsH{sub 3} decomposition on the sidewall affects the growth behavior of GaAs nanowire arrays.

36 MATERIALS SCIENCE↗

Electron Transport Behavior on Gate Length Scaling in Sub-50 nm GaAs Metal Semiconductor Field Effect Transistors

Short channel GaAs Metal Semiconductor Field Effect Transistors (MESFETs) have been fabricated with gate length to 20 nm, in order to examine the characteristics of sub-50 nm MESFET scaling. Here the rise in the measured transconductance is mainly attributed to electron velocity overshoot. For gate lengths below 40 nm, however, the transconductance drops suddenly. The behavior of velocity overshoot and its degradation is investigated and simulated by using a transport model based on the retarded Langevin equation (RLE). This indicates the existence of a minimum acceleration length needed for the carriers to reach the overshoot velocity. The argument shows that the source resistance must be included as an internal element, or appropriate boundary condition, of relative importance in any model where the gate length is comparable to the inelastic mean free path of the carriers.

36 MATERIALS SCIENCE↗

Polarization Resolved Single Dot Spectroscopy of (211)B InAs Quantum Dots

We report on single dot spectroscopy of (211)B InAs quantum dots, grown by molecular beam epitaxy. The dots exhibit sharp emission lines, the origin of which has been identified. Polarization dependent microphotoluminescence spectra confirm fine structure splittings from 20{mu}eV down to the determination limit of our setup (10 {mu}eV).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photocurrent Spectroscopy of Single Wurtzite GaAs Nanowires

Photocurrent of single wurtzite GaAs nanowires grown by Au-assisted molecular beam epitaxy is measured at room and low temperature (10 K). At room temperature a high photo-response with more than two orders of magnitude increase of current is observed. The wavelength dependence of the photocurrent shows a sharp change near the zinc blende GaAs band gap. The absence of the free exciton peak in the low temperature photocurrent spectrum, and problems related to determining the exact position of the energy bandgap of wurtzite GaAs from the observed data are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗