Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Ultrahigh elastically compressible and strain-engineerable intermetallic compounds under uniaxial mechanical loading

Intermetallic compounds possess unique atomic arrangements that often lead to exceptional material properties, but their extreme brittleness usually causes fracture at a limited strain of less than 1% and prevents their practical use. Thus, it is critical for them to exhibit either plasticity or some form of structural transition to absorb and release a sufficient amount of mechanical energy before failure occurs. This study observes that the ThCr 2 Si 2 -structured intermetallic compound (CaFe 2 As 2 ) and a hybrid of its structure (CaKFe 4 As 4 ) with 2 μm in diameter and 6 μm in height can exhibit superelasticity with strain up to 17% through a reversible, deformation-induced lattice collapse, leading to a modulus of resilience orders of magnitude higher than that of most engineering materials. Such superelasticity also can enable strain engineering, which refers to the modification of material properties through elastic strain. Density functional theory calculations and cryogenic nanomechanical tests predict that superconductivity in CaKFe 4 As 4 could be turned on/off through the superelasticity process, before fracture occurs, even under uniaxial compression, which is the favorable switching loading mode in most engineering applications. Our results suggest that other members with the same crystal structure (more than 2500 intermetallic compounds) and substitution series based on them should be examined for the possibility of manifesting similar superelastic and strain-engineerable functional properties.

36 MATERIALS SCIENCE↗

Strain control of the Néel vector in Mn-based antiferromagnets

Control of the Néel vector in antiferromagnetic (AFM) materials is one of the challenges preventing their use as active device components. Several methods have been investigated such as exchange bias, electric current, and spin injection, but little is known about strain-mediated anisotropy. This study of the AFM L1 0 -type MnX alloys MnIr, MnRh, MnNi, MnPd, and MnPt shows that a small amount of strain effectively rotates the direction of the Néel vector by 90° for all of the materials. For MnIr, MnRh, MnNi, and MnPd, the Néel vector rotates within the basal plane. For MnPt, the Néel vector rotates from out-of-plane to in-plane under tensile strain. The effectiveness of strain control is quantified by a metric of efficiency and by direct calculation of the magnetostriction coefficients. The values of the magnetostriction coefficients are comparable with those from ferromagnetic materials. Finally, these results indicate that strain is a mechanism that can be exploited for control of the Néel vectors in this family of antiferromagnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Breaking atomic-level ordering via biaxial strain in functional oxides: A DFT study

Oxygen vacancies are found to play a crucial role in inducing many functional properties at the heterointerfaces in complex oxides. Gaining better control over the properties requires an understanding of the atomic structure of oxygen vacancies at the heterointerfaces. In this paper, we elucidate the effects of the interfacial strain on the oxygen-vacancy ordering in fluorite δ-Bi 2 O 3 and perovskite LaNiO 2.5 using first-principles calculations. By applying biaxial strains, we find that the <110>-<111> oxygen vacancy order in δ-Bi2O3 is broken, resulting in a faster diffusion of oxygen ions. Similarly, the biaxial strain is used to leverage both ordered and disordered arrangements of vacancies in LaNiO 2.5 . Besides the vacancy order, we find that the biaxial strain can also be used to break the cation order in Gd 2 Ti 2 O 7 , where Gd and Ti antisites can be created on the cation sublattice, which leads to enhanced radiation tolerance and higher oxygen diffusivity. Overall, these results indicate that the biaxial strain that is commonly present at heterointerfaces can be used to gain control over both ordered and disordered arrangements of defects, potentially opening new opportunities to functionalize complex oxides.

36 MATERIALS SCIENCE↗

Influence of strain and dislocations on GaSb/GaAs quantum dots: From nested to staggered band alignment

We investigate the influence of strain and dislocations on band alignment in GaSb/GaAs quantum dot systems. Composition profiles from cross-sectional scanning tunneling microscopy images are interpolated onto a finite element mesh in order to calculate the distribution of local elastic strain, which is converted to a spatially varying band alignment using deformation potential theory. Our calculations predict that dislocation-induced strain relaxation and charging lead to significant local variations in band alignment. Furthermore, misfit strain induces a transition from a nested (type I) to a staggered (type II) band alignment. Although dislocation-induced strain relaxation prevents the type I to type II transition, electrostatic charging at dislocations induces the staggered band alignment once again.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning the band topology of GdSb by epitaxial strain

Rare-earth monopnictide (RE-V) semimetal crystals subjected to hydrostatic pressure have shown interesting trends in magnetoresistance, magnetic ordering, and superconductivity, with theory predicting pressure-induced band inversion. Yet, thus far, there have been no direct experimental reports of interchanged band order in RE-Vs due to strain. This work studies the evolution of band topology in biaxially strained GdSb(001) epitaxial films using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT). As biaxial strain is tuned from tensile to compressive strain, the gap between the hole and the electron bands dispersed along [001] decreases. The conduction and valence band shifts seen in DFT and ARPES measurements are explained by a tight-binding model that accounts for the orbital symmetry of each band. Finally, we discuss the effect of biaxial strain on carrier compensation and magnetic ordering temperature.

36 MATERIALS SCIENCE↗

Unusual magnetotransport in twisted bilayer graphene from strain-induced open Fermi surfaces

Anisotropic hopping in a toy Hofstadter model was recently invoked to explain a rich and surprising Landau spectrum measured in twisted bilayer graphene away from the magic angle. Suspecting that such anisotropy could arise from unintended uniaxial strain, we extend the Bistritzer–MacDonald model to include uniaxial heterostrain and present a detailed analysis of its impact on band structure and magnetotransport. We find that such strain strongly influences band structure, shifting the three otherwise-degenerate van Hove points to different energies. Coupled to a Boltzmann magnetotransport calculation, this reproduces previously unexplained nonsaturating B 2 magnetoresistance over broad ranges of density near filling ν = ± 2 and predicts subtler features that had not been noticed in the experimental data. In contrast to these distinctive signatures in longitudinal resistivity, the Hall coefficient is barely influenced by strain, to the extent that it still shows a single sign change on each side of the charge neutrality point—surprisingly, this sign change no longer occurs at a van Hove point. The theory also predicts a marked rotation of the electrical transport principal axes as a function of filling even for fixed strain and for rigid bands. More careful examination of interaction-induced nematic order versus strain effects in twisted bilayer graphene could thus be in order.

36 MATERIALS SCIENCE↗

A Standardized Analysis Process Using Digital Image Correlation to Calculate In Situ Cladding Strain from Modified Burst Tests for Fuel Performance Code Validation

Historical data collection on nuclear fuel cladding materials has focused on generating a statistically significant amount of data to assess the material and its failure behavior. Furthermore, data generated to support material model and failure criteria development were previously posttest evaluations, so a large number of tests was required to gain new understanding. A way to expedite this process is to develop techniques capable of generating large, high-fidelity data sets from a single test with lower uncertainty or quantified uncertainty. One such example of this approach is Oak Ridge National Laboratory’s use of modified burst tests (MBTs) to analyze the mechanical behavior and failure conditions of cladding during a simulated reactivity-initiated accident (RIA). Each test incorporates digital image correlation (DIC) analysis techniques that are used to assess the accumulated strain in situ, as well as eventual cladding failure. This work has been fruitful in defining strain-to-failure conditions for materials like silicon carbide (SiC) fiber–reinforced/SiC matrix composite tubes (SiC/SiC), iron-chromium-aluminum (FeCrAl) alloy tubes, and chromium-coated Zircaloy-4 tubes. However, there are numerous DIC software available, including open-source and proprietary software. The different DIC software use various algorithms to process images and calculate displacement values. Using these different software and algorithms can lead to varying results, and perhaps larger-than-expected uncertainties. In the present study, previously published MBT data encompassing a variety of test conditions were reanalyzed with two different DIC software to assess the variance in the calculated strain results. The data consisted of SiC/SiC, FeCrAl, and chromium-coated Zircaloy-4 tubes. Plots of the calculated strains during the transient revealed good agreement between the two DIC software. The average root-mean-square errors between the two software was 0.20% strain, which is slightly larger than a previously reported error value for these tests. In conclusion, this variance in results is low enough that this analysis method can be used for code validation.

Reactivity-initiated accident↗

Effect of lattice strain on magnetism in epitaxial YCrO 3 films

The influence of lattice strain on magnetism is studied for perovskite rare-earth chromite, YCrO 3 (YCO) thin films. A combined theoretical and experimental approach is used to demonstrate the correlation between lattice-strain and magnetic properties of YCO films. The first-principles calculations reveal that the local Cr magnetic moments and the out-of-plane magnetization linearly increase with changing the in-plane lattice strain from compressive to tensile. The experimental results agree with the theory findings showing a strong dependence of magnetization on epitaxial strain in YCO films. These results unveil the lattice-strain-controlled functionalities on perovskite rare-earth chromites and related material systems.

36 MATERIALS SCIENCE↗

Strain control of composite superconductors to prevent degradation of superconducting magnets due to a quench: I. Ag/Bi2Sr2CaCu2Ox multifilament round wires

The critical current of many practical superconductors is sensitive to strain, and this sensitivity is exacerbated during a quench that induces a peak local strain which can be fatal to superconducting magnets. Here, a new method is introduced to quantify the influence of the conductor stress and strain state during normal operation on the margin to degradation during a quench, as measured by the maximum allowable hot spot temperature T allowable, for composite wires within superconducting magnets. The first conductor examined is Ag-sheathed Bi2Sr2CaCu2Ox round wire carrying high engineering critical current density, J E, of 550 A mm−2 at 4.2 K and 15 T. The critical axial tensile stress of this conductor is determined to be 150 MPa and, in the absence of Lorentz forces, T allowable is greater than 450 K. With increasing axial tensile stress, σ a, however, T allowable decreases nonlinearly, dropping to 280 K for σ a = 120 MPa and to 160 K for σ a = 145 MPa. T allowable(σ a) is shown to be nonlinear and independent of magnetic field from 15 to 30 T. T allowable(σ a) dictates the balance between magnetic field generation, which increases with the magnet operating current and stress, and the safety margin, which decreases with decreasing T allowable, and therefore has important engineering value. It is also shown that T allowable(σ a) can be predicted accurately by a general strain model, showing that strain control is the key to preventing degradation of superconductors during a quench.

43 PARTICLE ACCELERATORS↗

Emergent symmetry in TbTe 3 revealed by ultrafast reflectivity under anisotropic strain

Here, we report ultrafast reflectivity measurements of the dynamics of the order parameter of the charge density wave (CDW) in TbTe 3 under anisotropic strain. We observe an increase in the frequency of the amplitude mode with increasing tensile strain along the a-axis (which drives the lattice into a > c, with a and c the lattice constants), and similar behavior for tensile strain along c (c > a). This suggests that both strains stabilize the corresponding CDW order and further support the near equivalence of the CDW phases oriented in a- and c-axis, in spite of the orthorhombic space group. The results were analyzed within the time-dependent Ginzburg–Landau framework, which agrees well with the reflectivity dynamics. Our study presents an ultrafast approach to assess the stability of phases and order parameter dynamics in strained systems.

Kim, Soyeun↗

Fundamental origin of the large impact of strain on superconducting Nb 3 Sn

We report that superconductors can carry very high current densities without resistive loss. This makes them highly suitable for the construction of compact high field magnets of several tens of tesla. However, with increasing current density and magnetic field come high Lorentz loads and high strain levels, and it is empirically known that superconducting properties are affected by strain. The superconducting properties of the most commonly used high field material, Nb 3 Sn, are particularly badly affected by strain. Here we demonstrate that strain causes significant sub-lattice distortion in the A15 lattice structure of Nb 3 Sn, and show how this leads to the relatively large reduction of its superconducting properties. The changes are found to be primarily due to changes in the electron density of states, with a lesser contribution due to changes in the phonon spectrum. The amount of sub-lattice distortion further depends on crystal orientation. In conclusion, these findings suggest that it is possible to mitigate the reduction of the current carrying capacity by strain through crystal alignment and sub-lattice stabilization. This would enable superconducting magnets to reach a significantly higher magnetic field, and ease their construction by simplifying react-and-wind coil fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic-plastic conductor damage evaluation at over 0.4% strain using a high-stress REBCO coil

Abstract Recent reports on screening current stress simulations of high-field REBCO magnets frequently present peak stresses over 1 GPa. However, this result is probably an unrealistic artifact of purely elastic calculations, considering the macroscopic yield and fracture stresses of approximately 900 MPa and less than 1.1 GPa for Hastelloy substrate-coated conductors. Here, we evaluate elastic-plastic conductor damage at over 0.4% strain using a high-stress REBCO coil exposed to a high field to explore this elastic-plastic regime. The coil was located off-center in a low-temperature superconductor magnet so as to induce a significant screening current in the enhanced radial field. Voltage taps, a Hall sensor, and two strain gauges were used for the instrumentation. We obtained strains exceeding 0.4% near the outward edge during the coil current charge from 350 A to 390 A, where the coil was exposed to external axial and radial magnetic fields of 13 T and 0.5 T. Post mortem results showed wavy plastic deformation, electrical damage, and REBCO defects. An elastic-plastic simulation reproduced the measured strains and predicted that ∼1 GPa stress is sufficient to induce ∼0.9% strain, thus validating our initial concerns with purely elastic models. This paper provides our experimental and simulation results.

Bang, Jeseok (ORCID:0000000247616334)↗

In-plane uniaxial-strain tuning of superconductivity and charge-density wave in CsV 3 Sb 5

The kagome superconductor CsV 3 Sb 5 with exotic electronic properties has attracted substantial research interest, and the interplay between the superconductivity and the charge-density wave is crucial for understanding its unusual electronic ground state. In this work, we performed resistivity and AC magnetic susceptibility measurements on CsV 3 Sb 5 single crystals uniaxially-strained along [100] and [110] directions. We find that the uniaxial-strain tuning effect ofT c (dT c /dε) andT CDW (dT CDW /dε) are almost identical along these distinct high-symmetry directions. These findings suggest the in-plane uniaxial-strain-tuning ofT c andT CDW in CsV 3 Sb 5 are dominated by associatedc-axis strain, whereas the response to purely in-plane strains is likely small.

Physics↗

Synchrotron measurements of local microstructure and residual strains in ductile cast iron

The local microstructure and distribution of thermally induced residual strains in ferrite matrix grains around an individual spherical graphite nodule in ductile cast iron (DCI) were measured using a synchrotron X-ray micro-diffraction technique. It is found that the matrix grains are deformed, containing dislocations and dislocation boundaries. Each of the residual strain components in the matrix grains exhibits a complex pattern along the circumferential direction of the nodule. Along the radial direction of the nodule, strain gradients from the interface to the grain interior are seen for some strain components, but only in some matrix grains. The observed residual strain patterns have been analysed by finite element modelling, and a comparison between the simulation and experiments is given. The present study of local residual stress by both experimental characterization and simulation provide much needed information for understanding the mechanical properties of DCI, and represent an important contribution for the microstructural design of new DCI materials.

Zhang, Y B↗

Sigma: Strain-level inference of genomes from metagenomic analysis for biosurveillance

Motivation: Metagenomic sequencing of clinical samples provides a promising technique for direct pathogen detection and characterization in biosurveillance. Taxonomic analysis at the strain level can be used to resolve serotypes of a pathogen in biosurveillance. Sigma was developed for strain-level identification and quantification of pathogens using their reference genomes based on metagenomic analysis. Results: Sigma provides not only accurate strain-level inferences, but also three unique capabilities: (i) Sigma quantifies the statistical uncertainty of its inferences, which includes hypothesis testing of identified genomes and confidence interval estimation of their relative abundances; (ii) Sigma enables strain variant calling by assigning metagenomic reads to their most likely reference genomes; and (iii) Sigma supports parallel computing for fast analysis of large datasets. In conclusion, the algorithm performance was evaluated using simulated mock communities and fecal samples with spike-in pathogen strains. Availability and Implementation: Sigma was implemented in C++ with source codes and binaries freely available at http://sigma.omicsbio.org.

59 BASIC BIOLOGICAL SCIENCES↗

Escherichia coli amino acid auxotrophic expression host strains for investigating protein structure–function relationships

Abstract A set of C43(DE3) and BL21(DE3) Escherichia coli host strains that are auxotrophic for various amino acids is briefly reviewed. These strains require the addition of a defined set of one or more amino acids in the growth medium, and have been specifically designed for overproduction of membrane or water-soluble proteins selectively labelled with stable isotopes, such as 2H, 13C and 15N. The strains described here are available for use and have been deposited into public strain banks. Although they cannot fully eliminate the possibility of isotope dilution and mixing, metabolic scrambling of the different amino acid types can be minimized through a careful consideration of the bacterial metabolic pathways. The use of a suitable auxotrophic expression host strain with an appropriately isotopically labelled growth medium ensures high levels of isotope labelling efficiency as well as selectivity for providing deeper insight into protein structure–function relationships.

Biochemistry & Molecular Biology↗

Antibacterial and antioxidant activities of Streptomyces sp. strain FR7 isolated from forest soil

Abstract Actinomycetes produce secondary metabolites with many bioactivities such as antimicrobial, which can be useful as alternatives against resistant bacterial strains. Therefore, the screening of new habitats is likely to provide new strains with high potential. In this work, the antimicrobial capacity was used to select Streptomyces sp. strains isolated from Raf Raf forest (Tunisia). From the strain displaying higher activity, FR7, an ethyl acetate extract was prepared under optimized culturing conditions (10 days at 30°C in ISP2 medium with initial pH 8), showing significant antimicrobial activity against Micrococcus luteus and Staphylococcus aureus (MIC = 5 μg ml−1), and Listeria monocytogenes and Pseudomonas aeruginosa (MIC = 20 μg ml−1). The extract displayed strong DPPH radical scavenging activity (IC50 = 1.3 μg ml−1) and protection of yeast cells from H2O2-induced oxidative stress determined by flow cytometry with dichlorofluorescein diacetate. The crude extract showed the presence of polyketides, with methylsalicylic acid as moiety, a large and diverse group of secondary metabolites with a wide range of bioactivities, including antioxidant and antibacterial. Based on 16S RNA gene sequences, strain FR7 was identified as belonging to genus Streptomyces with high resemblance to S. iakyrus. Streptomyces sp. FR7 has great potential as a source of antibacterial and antioxidant metabolites.

Weslati, Imen↗

High-throughput quantification of quasistatic, dynamic and spall strength of materials across 10 orders of strain rates

Abstract The response of metals and their microstructures under extreme dynamic conditions can be markedly different from that under quasistatic conditions. Traditionally, high strain rates and shock stresses are achieved using cumbersome and expensive methods such as the Kolsky bar or large spall experiments. These methods are low throughput and do not facilitate high-fidelity microstructure–property linkages. In this work, we combine two powerful small-scale testing methods, custom nanoindentation, and laser-driven microflyer (LDMF) shock, to measure the dynamic and spall strength of metals. The nanoindentation system is configured to test samples from quasistatic to dynamic strain-rate regimes. The LDMF shock system can test samples through impact loading, triggering spall failure. The model material used for testing is magnesium alloys, which are lightweight, possess high-specific strengths, and have historically been challenging to design and strengthen due to their mechanical anisotropy. We adopt two distinct microstructures, solutionized (no precipitates) and peak-aged (with precipitates) to demonstrate interesting upticks in strain-rate sensitivity and evolution of dynamic strength. At high shock-loading rates, we unravel an interesting paradigm where the spall strength vs. strain rate of these materials converges, but the failure mechanisms are markedly different. Peak aging, considered to be a standard method to strengthen metallic alloys, causes catastrophic failure, faring much worse than solutionized alloys. Our high-throughput testing framework not only quantifies strength but also teases out unexplored failure mechanisms at extreme strain rates, providing valuable insights for the rapid design and improvement of materials for extreme environments.

Eswarappa Prameela, Suhas (ORCID:0000000334530184)↗