Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The influence of tillage and fertilizer on the flux and source of nitrous oxide with reference to atmospheric variation using laser spectroscopy

Nitrous oxide (N 2 O) is the third most important long-lived greenhouse gas and agriculture is the largest source of N 2 O emissions. Curbing N 2 O emissions requires understanding influences on the flux and sources of N 2 O. We measured flux and evaluated microbial sources of N 2 O using site preference ( S P ; the intramolecular distribution of 15 N in N 2 O) in flux chambers from a grassland tilling and agricultural fertilization experiments and atmosphere. We identified values greater than that of the average atmosphere to reflect nitrification and/or fungal denitrification and those lower than atmosphere as increased denitrification. Our spectroscopic approach was based on an extensive calibration with 18 standards that yielded S P accuracy and reproducibility of 0.7 ‰ and 1.0 ‰, respectively, without preconcentration. Chamber samples from the tilling experiment taken ~ monthly over a year showed a wide range in N 2 O flux (0–1.9 g N 2 O-N ha -1 d -1 ) and S P (- 1.8 to 25.1 ‰). Flux and S P were not influenced by tilling but responded to sampling date. Large fluxes occurred in October and May in no-till when soils were warm and moist and during a spring thaw, an event likely representing release of N 2 O accumulated under snow cover. These high fluxes could not be ascribed to a single microbial process as S P differed among chambers. However, the year-long S P and flux data for no-till showed a slight direct relationship suggesting that nitrification increased with flux. The comparative data in till showed an inverse relationship indicating that high flux events are driven by denitrification. Corn ( Zea mays ) showed high fluxes and S P values indicative of nitrification ~ 4 wk after fertilization with subsequent declines in S P indicating denitrification. Although there was no effect of fertilizer treatment on flux or S P in switchgrass ( Panicum virgatum) , high fluxes occurred ~1 month after fertilization. In both treatments, S P was indicative of denitrification in many instances, but evidence of nitrification/fungal denitrification also prevailed. At 2 m atmospheric N 2 O S P had a range of 31.1 ‰ and 14.6 ‰ in the grassland tilling and agricultural fertilization experiments, respectively. These data suggest the influence of soil microbial processes on atmospheric N 2 O and argue against the use of the global average atmospheric S P in isotopic modeling approaches.

Environmental Sciences & Ecology↗
DOE OSTI2025

Manuscript model outputs, model source code, and figure scripts: The role of geomorphology in mediating biomass allocation impacts on salt-marsh resilience and carbon accumulation

This data package provides model source code (C++), model outputs, and figure generation scripts (R) needed to reproduce the following manuscript: Bruns, Nicholas E., Genevieve L. Noyce, and Matthew L. Kirwan. "The Role of Geomorphology in Mediating Biomass Allocation Impacts on Salt-Marsh Resilience and Carbon Accumulation." Estuarine, Coastal and Shelf Science 327 (December 2025): 109549. https://doi.org/10.1016/j.ecss.2025.109549. This manuscript investigates how geomorphology mediates the impact of biomass allocation shifts on salt marsh persistence and carbon (C) sequestration under sea level rise. We use a 1-D soil-column model (Kirwan and Mudd 2012) to perform experiments across a range of static root:shoot ratios (RSR = 1-4) spanning observed values. The model explicitly simulates interactions between tidal inundation, productivity, inorganic sediment deposition, and organic matter accumulation. Experiments determine whether geomorphic feedbacks amplify, dampen, or leave unchanged the ecosystem response to biomass allocation shifts. A first experiment uses constant sea level rise (2.5 mm/yr) to examine equilibrium dynamics and their influence on carbon accumulation rates across different suspended sediment concentrations (SSC). A second set of experiments calculates threshold sea level rise rates for marsh drowning across RSR and SSC combinations. Final experiments apply accelerating sea level rise scenarios (2000-2200) derived from NOAA projections (Sweet et al. 2022) to generate an envelope of expected responses, quantifying the importance of biomass allocation shifts on marsh carbon accumulation and persistence. All experiments are repeated across SSC ranging from 5-50 mg/L to investigate how these interactions vary in micro-tidal marshes with different sediment supplies. Package contents: * README.txt with detailed description of package contents and instructions for reproducing manuscript figures and model outputs * R scripts for generating all manuscript figures * C++ baseline model code from Kirwan and Mudd (2012) * C++ source code for 4 experimental model variants used in the manuscript, extending above baseline code * Model input files (.csv, .txt) including sea level rise scenarios * Model output files (.txt) used in manuscript analyses Temporal coverage: Model simulations span years 1900-2200, with accelerating sea level rise scenarios for 2000-2200. Key variables: Root:shoot ratio, suspended sediment concentration, carbon accumulation rate, vertical accretion rate, marsh elevation, inundation depth, threshold sea level rise rate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

North American boreal forests are a large carbon source due to wildfires from 1986 to 2016

Wildfires are a major disturbance to forest carbon (C) balance through both immediate combustion emissions and post-fire ecosystem dynamics. Here we used a process-based biogeochemistry model, the Terrestrial Ecosystem Model (TEM), to simulate C budget in Alaska and Canada during 1986–2016, as impacted by fire disturbances. We extracted the data of difference Normalized Burn Ratio (dNBR) for fires from Landsat TM/ETM imagery and estimated the proportion of vegetation and soil C combustion. We observed that the region was a C source of 2.74 Pg C during the 31-year period. The observed C loss, 57.1 Tg C year -1 , was attributed to fire emissions, overwhelming the net ecosystem production (1.9 Tg C year -1 ) in the region. Our simulated direct emissions for Alaska and Canada are within the range of field measurements and other model estimates. As burn severity increased, combustion emission tended to switch from vegetation origin towards soil origin. When dNBR is below 300, fires increase soil temperature and decrease soil moisture and thus, enhance soil respiration. However, the post-fire soil respiration decreases for moderate or high burn severity. The proportion of post-fire soil emission in total emissions increased with burn severity. Net nitrogen mineralization gradually recovered after fire, enhancing net primary production. Net ecosystem production recovered fast under higher burn severities. The impact of fire disturbance on the C balance of northern ecosystems and the associated uncertainties can be better characterized with long-term, prior-, during- and post-disturbance data across the geospatial spectrum. Our findings suggest that the regional source of carbon to the atmosphere will persist if the observed forest wildfire occurrence and severity continues into the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Early Warning Signs of a Mental Health Tsunami: A Coordinated Response to Gather Initial Data Insights From Multiple Digital Services Providers

The immediate impact of coronavirus 2019 (COVID-19) on morbidity and mortality has raised the need for accurate and real-time data monitoring and communication. The aim of this study is to document the initial observations from multiple digital services providers during the COVID-19 crisis, especially those related to mental health and well-being. We used email and social media to announce an urgent call for support. Digital mental health services providers (N = 46), financial services providers (N = 4), and other relevant digital data source providers (N = 3) responded with quantitative and/or qualitative data insights. People with lived experience of distress, as service users/consumers, and carers are included as co-authors. This study provides proof-of-concept of the viability for researchers and private companies to work collaboratively toward a common good. Digital services providers reported a diverse range of mental health concerns. A recurring observation is that demand for digital mental health support has risen, and that the nature of this demand has also changed since COVID-19, with an apparent increased presentation of anxiety and loneliness. Following this study, we will continue to work with providers in more in-depth ways to capture follow-up insights at regular time points. We will also onboard new providers to address data representativeness. Looking ahead, we anticipate the need for a rigorous process to interpret insights from an even wider variety of sources in order to monitor and respond to mental health needs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Salt Effects on Li-Ion Exchange Kinetics of Na 2 Mg 2 P 3 O 9 N: Systematic In Situ Synchrotron Diffraction Studies

The kinetics and thermodynamics of solid-state ion exchange of Li+ into Na2Mg2P3O9N were investigated using in situ synchrotron X-ray diffraction methods for a series of Li-containing salts, allowing systematic trends with general applicability to ion exchange reactions to be elucidated. The collection of data for a wide range of reaction conditions was enabled through the use of a novel multiwell sample environment which leverages the ability of the synchrotron beamline to rapidly (similar to 1 s) collect high-quality data suitable for monitoring reaction progress. From these data, it was possible to resolve the influence of salt choice and salt concentration on the ion exchange reaction kinetics. Furthermore, by carrying out experiments at different temperatures, initial estimates of activation energies were obtained. It was generally found that the ion exchange reaction kinetics strongly depended on the salt chosen as the ion source rather than being primarily determined by the ion mobility of the ceramic.

Cosby, Monty R.↗
DOE OSTI2023

Core collapse supernova gravitational wave emission for progenitors of 9.6, 15, and 25 M ⊙

Here, we present gravitational wave emission predictions based on three core collapse supernova simulations corresponding to three different progenitor masses. The masses span a large range, between 9.6 and 25M ⊙ , are all initially nonrotating, and are of two metallicities: zero and solar. We compute both the temporal evolution of the gravitational wave strains for both the plus and the cross polarizations, as well as their spectral decomposition and characteristic strains. The temporal evolution of our zero metallicity 9.6M ⊙ progenitor model is distinct from the temporal evolution of our solar metallicity 15M ⊙ progenitor model and our zero metallicity 25M ⊙ progenitor model. In the former case, the high-frequency gravitational wave emission is largely confined to a brief time period ~75 ms after bounce, whereas in the latter two cases high-frequency emission does not commence until ~125 ms after bounce or later. The excitation mechanisms of the high-frequency emission in all three cases correspond to proto-neutron star convection and accretion onto the proto-neutron star from the convective gain layer above it, with the former playing the dominant role for most of the evolution. The low-frequency emission in all three models exhibits very similar behavior. At frequencies below ~250 Hz, gravitational waves are emitted by neutrino-driven convection and the standing accretion shock instability (SASI). This emission extends throughout the simulations when a gain region is present. In all three models, explosion is observed at ~125, ~500, and ~250 ms after bounce in the 9.6, 15, and 25M ⊙ progenitor models, respectively. At these times, the low-frequency gravitational wave emission is joined by very low-frequency emission, below ~10 Hz. These very low-frequency episodes are the result of explosion and begin at the above designated explosion times in each of our models. Our characteristic strains tell us that, in principle, all three gravitational wave signals would be detectable by current-generation detectors for a supernova at a distance of 10 kpc. However, our 9.6M ⊙ progenitor model is a significantly weaker source of gravitational waves, with strain amplitudes approximately 5–10 times less than in our other two models. The characteristic strain for this model tells us that such a supernova would be detectable only within a much more narrow frequency range around the maximum sensitivity of today’s detectors. Finally, in our 9.6M ⊙ progenitor model, we see very high-frequency gravitational radiation, extending up to ~2000 Hz. This feature results from the interaction of shock- and deleptonization-induced convection with perturbations introduced in the progenitor by nuclear burning during core collapse. While unique to the 9.6M ⊙ progenitor model analyzed here, this very high-frequency emission may, in fact, be a generic feature of the predictions for the gravitational wave emission from all core collapse supernova models when simulations are performed with three-dimensional progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Infrasound and Gravity Waves Over the Andes Observed by a Pressure Sensor on Board a Stratospheric Balloon

The study of infrasound (acoustic) and gravity waves sources and propagation in the atmosphere of a planet gives us precious insight on atmosphere dynamics, climate, and even internal structure. The implementation of modern pressure sensors with high rate sampling on stratospheric balloons is improving their study. In our work we analyzed the data from the National Aeronautics and Space Administration Ultra Long Duration Balloon mission (16 May to 30 June 2016). Here, we focus on the balloon's transit of the Andes Mountains. We detected gravity waves that are associated to troposphere convective activity and mountain waves. An increase of the horizontal wavelengths from 50 to 70 km with increasing distance to the mountains is favoring the presence of mountain waves. We also report on the detection of infrasounds generated by the mountains in the 0.01–0.1 Hz range with a pressure amplitude increase by a factor 2 relative background signal. Besides, we characterized the decrease of microbaroms power when the balloon was flying away from the ocean coast. These observations suggest, in a way similar to microseisms for seismometers, that microbaroms are the main background noise sources recorded in the stratosphere even far from the ocean sources. Finally, we observed a broadband signal above the Andes, between 0.45 and 2 Hz, probably associated with a thunderstorm. The diversity of geophysical phenomena captured in less than a day of observation stresses the interest of high rate pressure sensors on board long-duration balloon missions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Instrument of the Imaging X-Ray Polarimetry Explorer

While X-ray spectroscopy, timing, and imaging have improved much since 1962 when the first astronomical nonsolar source was discovered, especially wi the launch of the Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer, and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detectors, which in turn is a result of the fate of approved missions and because celestial X-ray sources appear less polarized than expected. Only one positive measurement has been available until now: the Orbiting Solar Observatory measured the polarization of the Crab Nebula in the 1970s. The advent of microelectronics techniques has allowed for designing a detector based on the photoelectric effect of gas in an energy range where the optics are efficient at focusing in X-rays. Here we describe the instrument, which is the major contribution of the Italian collaboration to the Small Explorer mission called IXPE, the Imaging X-ray Polarimetry Explorer, which will launch in late 2021. The instrument is composed of three detector units based on this technique and a detector service unit. Three mirror modules provided by Marshall Space Flight Center focus X-rays onto the detectors. We show the technological choices, their scientific motivation, and results from the calibration of the instrument. IXPE will perform imaging, timing, and energy-resolved polarimetry in the 2–8 keV energy band opening this window of X-ray astronomy to tens of celestial sources of almost all classes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A new probe of μ Hz gravitational waves with FRB timing

We propose Fast Radio Burst (FRB) timing, which uses the precision measurements of the arrival time differences of repeated FRB signals along multiple sightlines, as a new probe of gravitational waves (GWs) around nHz to μHz frequencies, with the highest frequency limited by FRB repeating period. The anticipated experiment requires a sightline separation of tens of AU, achieved by sending radio telescopes to space. We find the signal of arrival time difference induced by GWs depends only on the local GWs in the solar system and we can correlate the measurements from different FRB sources or the same source with different repeaters, which leads to a better sensitivity with a larger number of FRB repeaters detected. Here, the projected sensitivity shows this method is a competitive probe in the nHz to μ Hz frequency range. It can fill the 'μHz gap' between pulsar timing arrays and Laser Interferometer Space Antenna (LISA) and is complementary to other proposals of GW detection in this frequency band.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Performance evaluation of an air conditioning system based on quasi isothermal dehumidifcation

This work presents a first study of novel air conditioning system based on quasi isothermal dehumidification combined with dew-point evaporative cooling through the Maisotsenko cycle (M-Cycle). The dehumidification process is realized in desiccant coated heat exchanger with heat rejection system. The key idea behind the solution is to maximize the cooling effectiveness by creating favourable conditions for dehumidification and evaporative cooling process. This is achieved by rejecting the heat of sorption in the desiccant system and providing cold and dry air for M-Cycle air cooler, which allows the system to be powered by using low-grade heat energy at 50 °C. The analysis is performed on the basis of experimentally validated numerical models of each component combined in a unified model of the system. The goal of the study is to determine the performance of the solution under different operational conditions. In addition two types of M-Cycle air coolers (i.e. cross-flow and regenerative unit) are compared to establish which unit is more suitable as the source of cooling energy for the system. It was established that proposed system is able to provide comfortable room parameters (supply air temperature equal 17 °C and humidity ratio equal 0.010 kg/kg-da) for outdoor air temperatures ranging from 28 to 36 °C and outdoor air humidity ranging from 0.010 to 0.018 kg/kg-da. This means that the proposed solution is able to provide comfortable conditions in temperate and humid climates. Results also indicate that the system consisting of the regenerative M-Cycle HMX allows better cooling load management, offers higher thermal Coefficient of Performance (COP th ) and uses less water compared to the system with the cross-flow HMX. However, the system with cross-flow heat and mass exchanger (HMX) has a relatively greater electrical Coefficient of Performance (COP el ) in most cases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Calibration of a compact ASIC-based data acquisition system for neutron/$γ$ discrimination and spectroscopy with organic scintillators

Segmented neutron detectors that use silicon photomultipliers (SiPMs) are receiving significant attention in nuclear security applications. Some of these detectors employ hundreds of channels and would therefore benefit from the use of high-channel-density and low-cost-per-channel data acquisition (DAQ) systems. Candidate DAQ systems that meet these requirements exist, but few perform full waveform digitization, which permits neutron and gamma-ray interaction discrimination via pulse shape. In this work, we study the performance of the TOFPET2 (PETsys Electronics), an ASIC-based DAQ designed for positron emission tomography, which has been adapted to provide sensitivity to pulse shape by the use of variable-period charge integration. We use a light-emitting diode to calibrate a combination of an ON Semiconductor (SensL) 60035-64P J-Series SiPM and TOPFET2 DAQ and evaluate the linearity of their response and dynamic range. Here, the calibration curve was obtained by comparing the DAQ response to that measured with a photodiode interfaced with a traditional waveform digitizer. This calibration process was used for rudimentary spectroscopy of various neutron and sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Impact of light output on the timing resolution of organic glass scintillator bars in a dual-ended readout configuration

The effectiveness of detector system modeling and validation depends on the quality of characterization performed on the system. For nuclear nonproliferation applications, which require detectors to address complex and variable field conditions, access to accurate system models is essential. This study presents the timing characterization of organic glass scintillator bars used in an imaging system developed at the University of Michigan. 137 Cs and 60 Co gamma-ray sources were used to determine the coincidence time resolution as a function of measured light output for two Compton scatter events between two organic glass scintillator bars. Timing resolution for two events, each with light output ranging from 100 to 1100 keVee were characterized. The resulting data were fit to a parametric function that was validated to agree with experimental results within ±25 ps. Simulations were performed to establish appropriate calibration points for each organic scintillator, thereby ensuring accurate calibration of light output values during analysis. This work successfully characterized the light output dependence of the coincidence timing resolution of a pair of organic glass detectors for use in an imaging system. Depending on the amount of scintillation light output from the events, the full width at half maximum of the measured coincidence time resolution ranged from 653.2 ± 16.1 ps for low light yields, 100 keVee, to 121.0 ± 8.4 ps for higher yields at 1100 keVee. The insights obtained from the timing resolution behavior will allow for accurate simulation capabilities in future security and verification efforts using scatter-based imaging systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

River Geomorphology Affects Biogeochemical Responses to Hydrologic Events in a Large River Ecosystem

Shifts in the frequency and intensity of high discharge events due to climate change may have important consequences for the hydrology and biogeochemistry of rivers. However, our understanding of event-scale biogeochemical dynamics in large rivers lags that of small streams. To fill this gap, we used high-frequency sensor data collected during four consecutive summers from a main channel and backwater site of the Upper Mississippi River. We identified high discharge events and calculated event concentration-discharge responses for both physical-chemical (nitrate, turbidity, and fluorescent dissolved organic matter) and biological (chlorophyll-a and cyanobacteria) constituents using metrics of hysteresis and slope. We found a range of responses across events, particularly for nitrate. Although fluorescent dissolved organic matter (FDOM) and turbidity exhibited more consistent responses across events, contrasting hysteresis metrics indicated that FDOM was flushed to the river from more distant sources than turbidity. Biological responses (chlorophyll a and cyanobacteria) differed more between sites than physical and chemical constituents. Lastly, we found that the event characteristics best explaining concentration responses differed between sites, with event magnitude more frequently related to responses in the main channel, and antecedent wetness conditions associated with response variation in the backwater. Furthermore, our results indicate that event responses in large rivers are distinct across the diverse habitats and biogeochemical components of a large floodplain river, which has implications for local and downstream ecosystems as the climate shifts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

On-the-fly active learning of interpretable Bayesian force fields for atomistic rare events

Abstract Machine learned force fields typically require manual construction of training sets consisting of thousands of first principles calculations, which can result in low training efficiency and unpredictable errors when applied to structures not represented in the training set of the model. This severely limits the practical application of these models in systems with dynamics governed by important rare events, such as chemical reactions and diffusion. We present an adaptive Bayesian inference method for automating the training of interpretable, low-dimensional, and multi-element interatomic force fields using structures drawn on the fly from molecular dynamics simulations. Within an active learning framework, the internal uncertainty of a Gaussian process regression model is used to decide whether to accept the model prediction or to perform a first principles calculation to augment the training set of the model. The method is applied to a range of single- and multi-element systems and shown to achieve a favorable balance of accuracy and computational efficiency, while requiring a minimal amount of ab initio training data. We provide a fully open-source implementation of our method, as well as a procedure to map trained models to computationally efficient tabulated force fields.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Choice of 16S ribosomal RNA primers affects the microbiome analysis in chicken ceca

We evaluated the effect of applying different sets of 16S rRNA primers on bacterial composition, diversity, and predicted function in chicken ceca. Cecal contents from Ross 708 birds at 1, 3, and 5 weeks of age were collected for DNA isolation. Eight different primer pairs targeting different variable regions of the 16S rRNA gene were employed. DNA sequences were analyzed using open-source platform QIIME2 and the Greengenes database. PICRUSt2 was used to determine the predicted function of bacterial communities. Changes in bacterial relative abundance due to 16S primers were determined by GLMs. The average PCR amplicon size ranged from 315 bp (V3) to 769 bp (V4–V6). Alpha- and beta-diversity, taxonomic composition, and predicted functions were significantly affected by the primer choice. Beta diversity analysis based on Unweighted UniFrac distance matrix showed separation of microbiota with four different clusters of bacterial communities. Based on the alpha- and beta-diversity and taxonomic composition, variable regions V1–V3(1) and (2), and V3–V4 and V3–V5 were in most consensus. Our data strongly suggest that selection of particular sets of the 16S rRNA primers can impact microbiota analysis and interpretation of results in chicken as was shown previously for humans and other animal species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Intense laser interaction with micro-bars

Intense laser fields interact very differently with micrometric rough surfaces than with flat objects. The interaction features high laser energy absorption and increased emission of MeV electrons, ions, and of hard x-rays. In this work, we irradiated isolated, translationally-symmetric objects in the form of micrometric Au bars. The interaction resulted in the emission of two forward-directed electron jets having a small opening angle, a narrow energy spread in the MeV range, and a positive angle to energy correlation. Our numerical simulations show that following ionization, those electrons that are pulled into vacuum near the object’s edge, remain in-phase with the laser pulse for long enough so that the Lorentz force they experience drive them around the object’s edge. After these electrons pass the object, they form attosecond duration bunches and interact with the laser field over large distances in vacuum in confined volumes that trap and accelerate them within a narrow range of momentum. The selectivity in energy of the interaction, its directionality, and the preservation of the attosecond duration of the electron bunches over large distances, offer new means for designing future laser-based light sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Charge breeders: Development of diagnostic tools to probe the underlying physics

Charge breeders were developed more than 20 years ago in the context of radioactive ion beam (RIB) production. The main goal is to boost the charge state of a singly charged RIB to a higher value matching the A/Q of a post-accelerator. In that way, the RIB produced at some tens of keV can efficiently be accelerated to energies in a range of few MeV/u up to several tens of MeV/u, which is of interest for nuclear structure and nuclear astrophysics experiments. Two families of charge breeders have been developed: one based on Electron Cyclotron Resonance Ion Sources (ECRISs) suitable for Continuous Wave (CW) operation and another built around Electron Beam Ion Sources (EBISs) used for pulsed post-accelerators. For many years, experimental studies have been carried out to enhance the charge breeding process and improve the extracted beam quality, i.e., purity, intensity, emittance, and time structure. The evolution of the charge breeders is also closely related to the emergence of new facilities delivering even more exotic beams. Diagnostic tools, such as Faraday cups, beam profile monitors, and emittance scanners, are mandatory to tune the machines and evaluate their performances. However, to go beyond that, a better understanding of plasma physics (in ECRIS) and electron-ion interactions (in EBIS), as well as the 1+ beam characteristics, for instance, energy spread transverse emittance, is needed. Therefore, simulation codes modeling the physics phenomena in both type of charge breeders were developed to support the understanding of experimental outputs and to gain insights into non-observable parameters. Nevertheless, more sophisticated diagnostic tools are required to improve the charge breeding performance and to extend the potential applications toward new RIB facilities. This Review will present the two kinds of charge breeders and their technical evolutions. It will review the diagnostic tools and simulation codes employed for operation and evaluation of the internal physics processes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Ecological Insights from Transferable Plant Biomass Mapping across the Arctic using High-resolution Structure-from-Motion and LiDAR Data

Warmer temperatures, permafrost thaw, and increased wildfire activity are driving rapid ecological change across the Arctic, significantly altering plant productivity and aboveground biomass (AGB). These rapid changes highlight the urgent need to improve monitoring of vegetation dynamics in the Earth’s northern ecosystems, where high spatiotemporal heterogeneity occurs at scales finer than those captured by traditional satellite observations. The growing use of Unoccupied Aerial Systems (UASs) presents an opportunity to overcome this limitation. Yet, the diversity of UAS platforms, sensors, and data collection and processing workflows presents challenges for developing standardized, generalizable approaches. To address this challenge, we compiled 672 AGB plots co-located with 183 UAS-based Structure-from-Motion (SfM) or Light Detection and Ranging (LiDAR) surveys collected across the Arctic. Here, we: (1) evaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB, (2) assessed scaling errors and their sources in two recent satellite-based AGB products derived from Landsat and MODIS, and (3) demonstrated the use of high-resolution AGB maps to quantify biomass variation across tundra plant functional types (PFTs) and to monitor post-fire recovery. Our results show that both SfM and LiDAR accurately captured AGB and its variability across tundra PFTs using a Random Forest (RF) model (overall RMSE: 0.336 kg/m2), with mapping performance varying slightly by region and data source. Using UAS-derived AGB maps as a benchmark, we identified systematic biases in satellite-derived AGB products, largely attributable to the magnitude of AGB and structural heterogeneity within coarse-resolution pixels. Applying our model to repeat UAS surveys following a tundra fire on Seward Peninsula, we observed rapid AGB recovery in non-shrub patches, with biomass recovering to pre-fire levels within 2 years. In contrast, shrub patches recovered more slowly, with AGB gains continuing over 2–4 years through both in-patch growth and lateral expansion (via dispersal) into remaining burned areas. Overall, these findings demonstrate the generalizability of UAS-based SfM and LiDAR data for estimating tundra AGB and highlight the potential of our approach to be broadly applied to generate high-quality AGB data for ecological monitoring and model benchmarking across the Arctic.

Yang, Daryl [ORNL] (ORCID:0000000317057823)↗