Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

An elastic analysis of stresses in a uniaxially loaded sheet containing an interference-fit bolt

The stresses in a sheet with an interference-fit bolt have been calculated for two sheet-bolt interface conditions: a frictionless interface and a fixed (no-slip) interface. The stress distributions were calculated for various combinations of sheet and bolt moduli. The results show that for repeated loading the local stress range is significantly smaller if an interference bolt is used instead of a loosely fitting one. This reduction in local stress range is more pronounced when the ratio of bolt modulus to sheet modulus is large. The analysis also indicates that currently used standard values of interference cause yielding in the sheet.

Crews, J. H., Jr.↗
NASA NTRS1972

Deformation, recrystallization, strength, and fracture of press-forged ceramic crystals.

Sapphire and ruby were very difficult to press-forge because they deformed without cracking only in a limited temperature range before they melted. Spinel crystals were somewhat easier and MgO, CaO, and TiC crystals much easier to forge. The degree of recrystallization that occurred during forging (which was related to the ease and type of slip intersections) varied from essentially zero in Al2O3 to complete (i.e., random polycrystalline bodies were produced) in CaO. Forging of bi- and polycrystalline bodies produced incoherent bodies as a result of grain-boundary sliding. Strengths of the forged crystals were comparable to those of dense polycrystalline bodies of similar grain size. However, forged and recrystallized CaO crystals were ductile at lower temperatures than dense hot-pressed CaO. This behavior is attributed to reduced grain-boundary impurities and porosity. Fracture origins could be located, indicating that fracture in the CaO occurs internally as a result of surface work hardening caused by machining.-

Rice, R. W.↗
NASA NTRS1972

Contamination threats to critical surfaces from handling and storage practices.

Review of the procedures and results of a program designed to remove the threat of sources of molecular and particulate contamination of critical optical, electrical, and mechanical elements in spacecraft. The results of recent contamination-probing thermal-vacuum tests indicate that some of the materials and practices commonly used to protect critical surfaces from molecular or particulate contamination can themselves represent significant threats. These contamination sources include clean-room and clean-tent materials, gloves, tissues, and covering or packaging materials. Mass and infrared spectral analyses of these materials and the environments and instruments exposed to them show that the contaminants are mostly plasticizers, slip or antistatic agents, and binders used in the manufacture of these products. Products of particular threat include vinyl gloves, boots, clean-tent walls, and some polyethylene sheets and bags. Techniques for reducing these threats are discussed.

Poehlmann, H. C.↗
NASA NTRS1972

Periodic solutions of a forced system with hysteresis.

Hysteresis damping arising in an oscillatory system due to the phenomenon of slip damping analyzed by Goodman and Klumpp (1956) is considered. An idealized physical model is proposed, and the existence of certain periodic motions is investigated in a system with small forcing which are near the largest periodic motion in a corresponding unforced system. Periodic solutions of the forced system are obtained.-

Drew, J. H.↗
NASA NTRS1972

Low-temperature solid-state phase transformations in 2H silicon carbide.

Study of the phase transformations taking place in 2H SiC single crystals at temperatures as low as 400 C. Some crystals transformed to a structure with one-dimensional disorder along the crystal c axis. Others transformed to a faulted cubic/6H structure. The transformation is time and temperature dependent, and is greatly enhanced by dislocations. The transformation takes place by means of a slip process perpendicular to the c axis. Cubic SiC crystals were observed to undergo a solid-state transformation above 1400 C.

Powell, J. A.↗
NASA NTRS1972

A high-power communications technology satellite for the 12 and 14 GHz bands.

Description of the mission, subsystems and communication capabilities of a joint Communications Technology Satellite (CTS) scheduled for launch in 1975 by the Canadian Department of Communications in cooperation with NASA. The principal objectives of the mission are TV transmission at 12 GHz to low-cost ground terminals, up-link TV transmission at 14 GHz transportable terminals, and flight tests of spacecraft subsystems and components for future communications satellites. The major advanced spacecraft subsystems are a novel superefficiency TWT design, a 0.4 mlb Mercury Bombardment ion engine for north-south station keeping, a 3-axis stabilization system to maintain a high antenna boresight pointing accuracy, a liquid metal slip ring experiment, and a lightweight extendible solar array with an initial power output greater than 1 kW.

Franklin, C. A.↗
NASA NTRS1972

Digital simulation of hybrid loop operation in RFI backgrounds.

A digital computer model for Monte-Carlo simulation of an imperfect second-order hybrid phase-locked loop (PLL) operating in radio-frequency interference (RFI) and Gaussian noise backgrounds has been developed. Characterization of hybrid loop performance in terms of cycle slipping statistics and phase error variance, through computer simulation, indicates that the hybrid loop has desirable performance characteristics in RFI backgrounds over the conventional PLL or the costas loop.

Ziemer, R. E.↗
NASA NTRS1972

Dispersive waves in a seeded MHD generator.

The equations giving the response of a slightly ionized plasma with monatomic components to sinusoidal perturbations have been formulated. Included in the model equations were the electron Hall effect, electron thermal diffusion, radiation, and electron-atom rate processes. Plasma conditions were limited to those where viscous effects, the induced magnetic field, ion slip, and atom-atom inelastic processes can be neglected. Presented are results of numerical calculations for MHD generators with a working fluid of potassium seeded argon.

Harstad, K. G.↗
NASA NTRS1972

Determination of Burgers vectors in close-packed metals using g.b = 2 contrast.

Reexamination of dislocation images giving double contrast in the electron microscope for g.b = 2 as a possible means for Burgers vector determinations. In fcc foils which have been cut parallel to an active slip plane, the g.b = 2 criterion provides a quick positive Burgers vector analysis which can be carried out during observation. The method is also applicable to basal dislocations in hcp. A comparison between calculated two-beam profiles and experimental images in aluminum is discussed, and several commonly observed characteristics of g.b = 2 contrast are described.

Kestenbach, H.-J.↗
NASA NTRS1972

Momentum flux in two phase two component low quality flow.

Values of a one-dimensional momentum flux at a test section discharge station of a two-phase two-component low quality flow computed by two methods, one based on a one-dimensional homogeneous model and the other on a variable slip model, are compared to experimental values for a range of two-phase flow conditions. The comparison seems to indicate the superior accuracy in momentum flux predictions to be on the side of the one-dimensional homogeneous model.

Baumeister, K. J.↗
NASA NTRS1972

High-temperature creep of polycrystalline chromium.

Chromium prepared by the iodide process was consolidated into 100-g buttons by arc melting and fabricated to sheet by rolling. Test specimens machined from the wrought sheet were annealed in palladium-purified hydrogen, followed by a purification anneal, in order to produce stable grain structures for testing. Observations of surface slip lines and dislocation substructures suggest that a diffusion-controlled, dislocation-climb mechanism is operative in the creep of chromium over the temperature range investigated.

Stephens, J. R.↗
NASA NTRS1973

New motor shaft angular accelerometer concept

Concept permits measurement of the acceleration of continuously rotating shafts without use of slip rings or telemetry and with little additional inertial load. Concept has application in servomotor control circuits and easy-to-fly airplane controls.

Smetana, F. O.↗
NASA NTRS1972

Identification of geostructures of continental crust particularly as they relate to mineral resource evaluation

The author has identified the following significant results. Preliminary examination of ERTS-1 imagery in central and northern Alaska substantiates the existence of a conjugate set of northeast and northwest faults suggested by linears noted on Nimbus 4 images. Linears of both trends are well expressed and several have been mapped as faults, including the Shaw Creek fault. Imagery provides new data to support the interpretation that the Kobuk Trench is the northern margin of a broad west-trending fault zone bounded on the north and south by strike-slip faults. In northwestern Alaska, MSS band 5 imagery shows Mississippian limestone as white, while shale, sandstone, and chert of other ages appear dark. As the limestone is the basal formation of the numerous thrust plates stacked in the area, images of band 5 will assist significantly in depicting the distribution of the thrust plates. In south-central Alaska the newly described Totshunda fault is readily identified and extends into areas not yet mapped. Also shown is another fault parallel to the south of the Totshunda which has not yet been recognized in the field.

Gryc, G.↗
NASA NTRS1973

A reconnaissance space sensing investigation of crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau

The author has identified the following significant results. Analysis of ERTS-1 MSS imagery over the sourthern Basin-Range Province of California, Nevada, and Arizona has led to recognition of regional tectonic control of volcanism, plutonism, mineralization, and fault patterns. This conclusion is the result of geologic reconnaissance of anomalies observed in ERTS-1 and Apollo-9 data, guided by intermediate scale U-2 photography, SLAR, and relevant geologic literature. In addition to regional tectonic studies, the ERTS-1 imagery provides a basis for detailed research of relatively small geologic features. Interpretation of ERTS-1 and Apollo-9 space imagery and intermediate scale X-15 and U-2 photography indicates the presence of a major fault zone along the California-Nevada state line, here named the Pahrump fault zone. Field mapping confirms previously unreported evidence of fault breaks in bedrock, along range fronts and in Quaternary alluvium and lake sediments. Regional gravity lows and fault traces within the Pahrump fault zone from a general left stepping en echelon pattern. The trend and postulated diplacement for this fault are similar to other major strike slip fault zones in the southern Basin-Range Province.

Bechtold, I. C.↗
NASA NTRS1973

Deformation processes in forging ceramics

The deformation processes involved in the forging of refractory ceramic oxides were investigated. A combination of mechanical testing and forging was utilized to investigate both the flow and fracture processes involved. Deformation studies of very fine grain Al203 revealed an apparent transition in behavior, characterized by a shift in the strain rate sensitivity from 0.5 at low stresses to near unity at higher stresses. The behavior is indicative of a shift in control between two dependent mechanisms, one of which is indicated to be cation limited diffusional creep with significant boundary enhancement. The possible contributions of slip, indicated by crystallographic texture, interface control of the diffusional creep and inhomogeneous boundary sliding are also discussed. Additional experiments indicated an independence of deformation behavior on MgO doping and retained hot pressing impurities, at least for ultrafine grained material, and also an independence of test atmosphere.

Cannon, R. M.↗
NASA NTRS1973

Adhesion, friction, and wear of a copper bicrystal with (111) and (210) grains

Sliding friction experiments were conducted in air with polycrystalline copper and ruby riders sliding against a copper bicrystal. Friction coefficient was measured across the bicrystal surface, and the initiation of adhesive wear was examined with scanning electron microscopy. Results indicate a marked increase in friction coefficient as the copper rider crossed the grain boundary from the (111) plane to the (210) plane of the bicrystal. Adhesion, friction, and initiation of adhesive wear was notably different in the adjacent grains of differing orientation. A slip-band adhesion-generated fracture mechanism for wear particle formation is proposed.

Brainard, W. A.↗
NASA NTRS1973

Potential teleoperator applications in manned aerospace systems

The trend of teleoperator development is toward digital computer controlled systems which utilize local sensor-computer-actuator loops to avoid obstacles and to sense manipulator grip-and-slip. The potential applications of advanced teleoperator technology to manned aerospace systems include long manipulator booms to be mounted on the shuttle. These can transfer cargo from the space shuttle and can acquire and retrieve objects in space. Free-flying teleoperators capable of acquiring, inspecting, repairing or refurbishing satellites in orbit are another space application. Another potential application of teleoperator technology is the concept of using an anthropomorphous teleoperator in lieu of man to control aircraft or spacecraft normally controlled by a human pilot.

Johnsen, E. G.↗