Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Predicting Liquid–Liquid Phase Separation of Submicrometer Proxies for Atmospheric Secondary Aerosol

Liquid–liquid phase separation (LLPS) of atmospheric aerosols can significantly impact climate, air quality, and human health. However, their complex composition, small size, and history-dependent properties result in great uncertainty in the modeling of aerosol phase state and atmospheric processes. Herein, using cryogenic transmission electron microscopy (cryo-TEM), we examined model submicron aerosols composed of organic compounds and ammonium sulfate, and established a parameterization for the separation relative humidity (SRH) that accounts for chemical composition, particle size, and equilibration time. We evaluated different variables that describe chemical composition: O/C ratio, partition coefficient, solubility, molar mass, and polarizability. The O/C ratio fits the SRH of micrometer droplets best, and by using a scaling factor to translate the micrometer SRH parameterization to submicron aerosols, we incorporate the effects of size and equilibration time. The measured scaling factor for the submicron mean SRH (30nm – 1μm, 20 min equilibration times) is 0.80, the factor becomes 1 with equilibration time over 1 hour, and is equal to 0, meaning that SRH is absent, when the aerosol dry diameter is smaller than 30 nm. Furthermore, our parameterization will aid in universal SRH modeling, potentially leading to more accurate predictions of aerosol mass, optical properties, hygroscopicity, and heterogeneous chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep Eutectic Solvent Formed by Imidazolium Cyanopyrrolide and Ethylene Glycol for Reactive CO 2 Separations

Solvents made from a reactive ionic liquid, with an imidazolium cation and pyrrolide anion, and ethylene glycol at a wide compositional range were studied for separations of CO 2 at low partial pressures (<<0.1 bar up to 1 bar). Thermal analysis and measurements of viscosity and density show compacting of the liquid upon mixing with enhanced stability achieved by hydrogen bonding. A detailed mechanistic study was performed by IR, quantitative NMR, and ab initio calculations that show significant CO 2 absorption capacity below 5000 ppm of CO 2 in N 2 . Three reversible routes are found that yield carbonate (major product), carboxylate (moderate), and carbamate (minor) species. With CO 2 at 100% RH, bicarbonate along with carbonate species form. The CO 2 -ethlyene glycol reaction complex, the carbonate anion, is stabilized by the hydrogen bonding and Coulombic interactions, thus preventing evaporation of the solvent during regeneration. This study demonstrates a promising approach to designer green solvents for CO 2 separations in open systems such as direct air capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated Ion-Exchange Membrane Resin Wafer Assemblies for Aromatic Organic Acid Separations Using Electrodeionization

Aromatic acids, such as p-coumaric acid, are valuable chemical intermediates that are used in the specialty chemical industries because they are precursors to phenylpropanoid compounds. The separation of p-coumaric acid from fermentation broths is a critical step in the biochemical production process and more broadly the circular carbon economy. Electrodeionization (EDI) has been applied toward separations of low-carbon chain acids, but purifying p-coumaric acid has been challenging due to fouling and irreversible binding with ion-exchange membranes and resins. Here, we report a new membrane wafer assembly (MWA) consisting of laminated ion exchange membranes to porous ionomer-binder resin wafers for EDI. The MWAs in an EDI stack showed a 7-fold increase in p-coumaric acid capture while also using 70% less specific energy consumption when benchmarked against state-of-the-art resin wafer EDI modules. The more efficient p-coumaric acid recovery was ascribed to (i) the 38% reduction in interfacial transport resistance between the membrane and resin wafer and (ii) using imidazolium anion exchange membranes and ionomer binders in the MWA. MD simulations revealed enhanced transport rates for p-coumarate in imidazolium ionomers through π–π interactions. As a result, adopting the new MWA significantly reduced the amount of ion-exchange membranes in EDI and may lead to drastic capital cost savings.

42 ENGINEERING↗

Fragment Separator ACCULINNA-2

Project of a new in-flight fragment separator is proposed as a part of the third generation DRIBs facilities in Dubna. As compared to the existing separator ACCULINNA, beam intensity should be increased by a factor 10-15, the beam quality improved and the RIB assortment should broaden considerably at ACCULINNA-2. Research program and structure are outlined for the new instrument.

43 PARTICLE ACCELERATORS↗

Design of a New Recoil Separator for Measurements of Radiative Capture Reactions in Astrophysics

The rates of proton- and alpha-capture reactions on unstable proton-rich nuclei are needed to understand the energy generation and element synthesis occurring in novae, X-ray bursts, and other explosions. Direct measurements of the cross sections of some of these reactions are now possible with radioactive beams and a recoil separator. A new device for such measurements, the Separator for CApture Reactions [SECAR], is being designed for use at the Facility for Rare Isotope Beams (FRIB). The specifications and preliminary conceptual design will be discussed along with plans for the first set of measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Separation of Copper Isotopes in the Laser Plume

Isotopic separation was observed during ablation of standard copper samples by a nanosecond Nd-YAG laser and a femtosecond Ti:sapphire laser at 266 nm. A time-of-flight mass spectrometer, orthogonal to the direction of the laser plume, was used to measure the isotopic composition of the plasma. A voltage was applied to the pulser at different delay times after the laser was ired in order to obtain a temporal profile as the plume expanded. The fraction of {sup 63}Cu in the plasma detected by the mass spectrometer reaches a maximum of 0.83 at 6 US and 3 {mu}s after the laser is fired for the nanosecond and femtosecond lasers respectively, before falling back to the natural abundance ratio of 0.69. As reported in the literature, the ion peaks are centered at two different delay times, representing fast and slow ion energy distributions. A mechanism based on the electric ield interactions between the electrons and ions is proposed to explain the separation of isotopes in the plume.

07 ISOTOPE AND RADIATION SOURCES↗

Radiolytic Degradation in Lanthanide/Actinide Separation Ligands–NOPOPO: Radical Kinetics and Efficiencies Determinations

Trivalent lanthanide/actinide separations from used nuclear fuel occurs in the presence radiation fields that degrades the extraction ligands and solvents. Here we have investigated the stability of a new ligand for lanthanide/actinide separation; 2,6-bis[(di(2-ethylhexyl)phosphino)methyl] pyridine N,P,P-trioxide, TEH(NOPOPO). The impact of {gamma}-radiolysis on the distribution ratios for actinide (Am) and Lanthanide (Eu) extraction both in the presence and absence of an acidic aqueous phase by TEH(NOPOPO) was determined. Corresponding reaction rate constants for the two major radicals, hydroxyl and nitrate, were determined for TEH(NOPOPO) in the aqueous phase, with room temperature values of (3.49 {+-} 0.10) x 10{sup 9} and (1.95 {+-} 0.15) x 10{sup 8} M{sup -1} s{sup -1}, respectively. The activation energy for this reaction was found to be 30.2 {+-} 4.1 kJ mol{sup -1}. Rate constants for two analogues (2-methylphosphonic acid pyridine N,P-dioxide and 2,6-bis(methylphosphonic acid) pyridine N,P,P-trioxide) were also determined to assist in determining the major reaction pathways.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Actinide-Lanthanide Separation Process

The Actinide-Lanthanide SEParation (ALSEP) process is described. The process uses an extractant phase consisting of either N,N,N',N'-tetraoctyldiglycolamide (TODGA) or N,N,N',N'-tetra(2 ethylhexyl)diglycolamide (T2EHDGA) combined with 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]). The neutral TODGA or T2EHDGA serves to co-extract the trivalent actinide and lanthanide ions from nitric acid media. Switching the aqueous phase chemistry to a citrate buffered diethylenetriaminepentaacetic acid (DTPA) solution at pH 2.5 to 4 results in selective transfer of the actinides to the aqueous phase, thus resulting in separation of these two groups of elements.

actinide separation↗

Sigma Team for Minor Actinide Separation: PNNL FY 2011 Status Report

This report summarizes work conducted in FY 2011 at PNNL to investigate new methods of separating the minor actinide elements (Am and Cm) from the trivalent lanthanide elements, and separation of Am from Cm. For the former, work focused on a solvent extraction system combining an acidic extractant (HDEHP) with a neutral extractant (CMPO) to form a hybrid solvent extraction system referred to as TRUSPEAK (combining the TRUEX and TALSPEAK processes). For the latter, ligands that strongly bing uranyl ion were investigated for stabilizing corresponding americyl ion.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Accelerator Generation and Thermal Separation (AGATS) of Technetium-99m

Accelerator Generation and Thermal Separation (AGATS) of Technetium-99m is a linear electron accelerator-based technology for producing medical imaging radioisotopes from a separation process that heats, vaporizes and condenses the desired radioisotope. You can learn more about INL's education programs at http://www.facebook.com/idahonationallaboratory.

59 BASIC BIOLOGICAL SCIENCES↗

Cost‐Effective and Scalable Approach for the Separation and Direct Cathode Recovery from End‐of‐Life Li‐Ion Batteries

Li-ion battery recycling presents a promising opportunity to decrease dependence on foreign sources of materials and harvest precious materials within the United States. Herein, a superior complete direct recycling process on individual end-of-life cells is reported where the recovered high-purity cathode active material, as well as electrolyte salt Li hexafluorophosphate (LiPF 6 ) can be reused without significant processing. This new process utilizes a series of mechanical separation steps that enable the separation of the cathode and anode active materials while they are still attached to their current collectors. Using this type of process can significantly reduce metal contamination and enable a clean cathode that can be directly recycled. The process if implemented commercially can greatly reduce the environmental burden of batteries as the greenhouse gas emissions of 8.25 kg CO 2 e kg −1 from the direct recycling process are 64% lower compared to those from virgin production of cathode material. During electrochemical testing of the recovered LiNi 0.6 Mn 0.2 Co 0.2 O 2 a discharge capacity of ≈160 mAh g −1 and good cyclability of over 250 cycles at 0.33C are achieved. This success paves a new pathway to explore and optimize existing Li-ion battery recycling procedures.

electrolyte reuse↗

Charge Separation of Wurtzite/Zinc-blende Heterojunction GaN Nanowires

The electronic properties of wurtzite/zinc-blende (WZ/ZB) heterostructure GaN are investigated using first-principles methods. A small component of ZB stacking formed along the growth direction in the WZ GaN nanowires does not show a significant effect on the electronic property, whereas a charge separation of electrons and holes occurs along the directions perpendicular to the growth direction in the ZB stacking. The later case provides an efficient way to separate the charge through controlling crystal structure. These results should have significant implications for most state of the art excitonic solar cells and the tuning region in tunable laser diodes.

14 SOLAR ENERGY↗

Bismuth Detection in Alkaline Electrolyte via Anodic Stripping Voltammetry for Battery Separator Evaluation

Abstract Anodic stripping voltammetry (ASV) has been widely used for the detection of several heavy metal ions in neutral and acidic solution, in many cases employing electrodes and/or solutions incorporating Bi. In this work we demonstrate that Bi(OH) 4 − ion concentration can be measured in highly alkaline 8.5 M KOH solution using ASV. The addition of Pb in similar concentrations to the Bi(OH) 4 − being measured is shown to improve both the sensitivity and precision of the method. When the Pb additive is employed, a formal limit of detection of 8.5 ppb is achieved, compared to 17.3 ppb when the Pb additive is not used. Due to the use of Bi additives in alkaline battery chemistries, it follows that separators which limit Bi(OH) 4 − diffusion into the bulk electrolyte and away from the electrodes are of interest. For this purpose, we utilize ASV to determine Bi(OH) 4 − diffusion rates through Celgard 3501, cellophane 350P00, and Nafion 211. Bi(OH) 4 − crossover rates, as determined by ASV, are shown to be repeatable and consistent with expectations from the known separator structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porous Structure Design of Polymeric Membranes for Gas Separation

High-performance polymeric membranes for gas separation are of interest for molecular-level separations in industrial-scale chemical, energy and environmental processes. To overcome the inherent trade-off relationship between permeability and selectivity, the creation of permanent microporosity in polymeric matrices is highly desirable because the porous structures can provide a high fractional free volume to facilitate gas transport through the dense layer. In this feature article, recent developments in the formation of porous polymeric membranes and potential strategies for pore structure design are reviewed.

36 MATERIALS SCIENCE↗

Alpha and gamma radioysis of nuclear solvent etxraction ligands used for An(III) and Ln(III) Separations

The separation of the minor actinides from dissolved nuclear fuel remains a major challenge in developing large-scale waste separations processes. One important criterion is that all these processes must be robust under high acidity and radiation dose conditions. Here we have investigated the TRUEX ligand CMPO in dodecane, comparing the effects of gamma (60Co) with alpha irradiation using isotopic alpha sources (244Cm, 211At) experiments. The radiolytically-based CMPO decomposition efficiencies are approximately the same for both types of radiolysis, with the overall decomposition being significantly less when this formulation is irradiated in contact with aqueous acid.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The separation of lanthanides and actinides in supercritical fluid carbon dioxide

Supercritical fluid carbon dioxide presents an attractive alternative to conventional solvents for recovery of the actinides and lanthanides. Carbon dioxide is a good solvent for fluorine and phosphate-containing ligands, including the traditional tributylphosphate ligand used in process-scale uranium separations. Actinide and lanthanide oxides may even be directly dissolved in carbon dioxide containing the complexes formed between these ligands and mineral acids, obviating the need for large volumes of acids for leaching and dissolution, and the corresponding organic liquid–liquid solvent extraction solutions. As a result, examples of the application of this novel technology for actinide and lanthanide separations are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preparative scale separation of thulium from erbium for neutron capture cross section measurements - Part: Preparative scale

Here, this paper discusses the development of a separation method for isolation of Tm-171 from a half-gram irradiated erbium target in support of stockpile stewardship and astrophysics research. The developed procedure is based on cation exchange separation using alpha-hydroxyisobutyric acid (α-HIBA) as chelating agent. It is able to achieve either a decontamination factor of 1.4(4) × 10 5 with 68.9(3) % recovery or 95.4(3) % recovery with a decontamination factor of 5.82(7) × 10 3 for a mock 500-mg target containing 17.9 mg thulium in a single pass-through at room temperature.

171Tm↗

Chromatographic separation of americium from europium using bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine

The separation of americium(III) from europium(III) was achieved utilizing a bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine (CA-BTP) chromatographic resin. The extraction chromatographic materials were prepared using various concentrations of CA-BTP. This new, hydrolytically stable extractant was impregnated on an inert polymeric support at 40% loading. The uptake of Am(III) and Eu(III) by this material from 0.1 to 4.0 M aqueous HNO 3 solutions was measured. The resulting dry weight distribution ratios, D w , indicated a strong preference for Am(III) with little affinity for Eu(III). These results are similar to recently reported solvent extraction studies indicating a maximum uptake of Am(III) in the 0.5–1.0 M HNO 3 range. The resin preparation, performance, and characterization of the Am/Eu separation are reported herein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗