Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “relational databases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

OSSE observations of the Crab pulsar

We present results of the Compton Gamma-Ray Observatory (CGRO) Oriented Scintillation Spectrometer Experiment (OSSE) observations of the Crab pulsar, made during MJD 48373-48406 (1991 April 27 - 1991 May 30) and MJD 48798-48804 (1992 June 25 - 1992 July 1). Pulsar light curves and spectra over the approximately 0.05 to 10 MeV range are presented. The arrival time of the gamma-ray peak and the radio peak agree to within 30 microsec which is better than the approximately 300 microsec accuracy of the measurements. The overall pulse phase averaged spectrum in the 0.1 - 10 MeV range is well-fit by a power law of the form 0.05 x (E/0.13 MeV)exp(-(1.99 +/- 0.03)) photons/sq cm/s. The outer-gap model (with gap parameter equal to 0.46) provided to us by Ho agrees with the data to better than 20%. The spectra of the bridge and second peak are slightly harder than the first peak as measured by the hardness ratio (approximately 110 - 220 keV)/(approximately 50 - 105 keV): P1 = 0.54 +/- 0.01, P2 = 0.63 +/- 0.01, bridge = 0.68 +/- 0.03. The phase of the two peaks in the light curve is constant over the 50 - 550 keV range to within the accuracy of the measurements (better than 0.02 in phase). No evidence was found for variability of the light curve on timescales from 2 minutes (less than a factor of 1.8) to 1 year (less than a factor of 1.06), where these are 3 sigma upper limits. However, when we examine the historical database, we find, in agreement with Nolan et al. (1993), that there is evidence for a 13 year variation in the ratio of the intensity of peak 2 to peak 1. We show that if this is interpreted as being due to precession (which changes the relative view of the intrinsic gamma-ray pulse as seen on earth), the variation is consistent with models of neutron star structure. The optical data may be in conflict with the interpretation however. We found no statistically significant lines in the 50 - 550 keV range in the spectrum. The average 3 sigma upper limits in 10(exp -3) photons/sq cm/s for lines at 0.073, 0.078, 0.4, 0.44, 0.511, and 0.545 MeV are 0.3, 0.5, 0.6, 0.5, and 0.1.

Ulmer, M. P.↗
NASA NTRS2016

Spaceport Command and Control System - Support Software Development

The Information Architecture Support (IAS) Team, the component of the Spaceport Command and Control System (SCCS) that is in charge of all the pre-runtime data, was in need of some report features to be added to their internal web application, Information Architecture (IA). Development of these reports is crucial for the speed and productivity of the development team, as they are needed to quickly and efficiently make specific and complicated data requests against the massive IA database. These reports were being put on the back burner, as other development of IA was prioritized over them, but the need for them resulted in internships being created to fill this need. The creation of these reports required learning Ruby on Rails development, along with related web technologies, and they will continue to serve IAS and other support software teams and their IA data needs.

Information Architecture↗
NASA NTRSDate not supplied

Magnetohydrodynamic and Aerodynamic Assessment of Ballistic Entry of a 70deg Spherecone at Mars and Venus

An electrical conductivity database for continuum flow in a CO2 atmosphere over a 70 deg spherecone was created using the Data Parallel Line Relaxation Code computational fluid dynamics software to inform development of future magnetohydrodynamic subsystems at Venus and Mars. Sixteen freestream conditions were considered at Mars with atmospheric relative velocities from 5 to 8 km/s and altitudes between 20 and 80 km. Sixteen freestream conditions were considered at Venus with atmospheric relative velocities from 9 to 12 km/s and altitudes between 85 and 115 km. Results indicate that the total electrical conductivity in the flow volume always increases as velocity increases. At low velocities, the electrical conductivity is higher at high altitudes, while at high velocities, the electrical conductivity is higher at low altitudes. Three of the 80 km altitude computational fluid dynamics solutions show good agreement with Direct Simulation Monte Carlo results. In general, computational fluid dynamics predicts thinner shocks, higher electron number density, and similar vibrational temperatures as direct simulation Monte Carlo. The magnetohydrodynamic force was calculated at both Mars and Venus. Results indicate there may not be sufficient control authority to use magnetohydrodynamics as a trajectory control mechanism at Mars without artificially increasing the electrical conductivity of the flow, but there may be appreciable control authority for a drag-modulated aerocapture at Venus.

Destiny M Fawley↗
DOE OSTI2016

There is Nothing Here for You: Passive Institutional Controls and Preemptive Resource Exploitation - 16197

The Department of Energy (DOE) Carlsbad Field Office (CBFO) is required by Title 40 CFR Part 191.14(c) and Title 40 CFR Part 194.43 to develop a Passive Institutional Controls (PICs) program to prevent the likelihood for future human intrusion into the Waste Isolation Pilot Plant (WIPP). The purpose of this paper is to explore how the exploitation of resources under nuclear waste repositories as a part of PICs could reduce the risk of future human intrusion. The WIPP, located in the northern Permian Basin near Carlsbad, New Mexico, is a geologic repository for the permanent isolation of defense-related transuranic waste. In 1995, a series of geophysical surveys by the New Mexico Bureau of Mines and Mineral Resources estimated the total hydrocarbon reserves underneath the WIPP, which included a 16-section area plus a one mile buffer. Since that time the Delaware Basin well database has been maintained to closely monitor hydrocarbon extraction activities. The database was used in compiling relevant oil and gas extraction data retrieved from The New Mexico Oil Conservation Division. The volume of hydrocarbons extracted from 1995 to the present suggests that if current extraction growth trends continue (as historic market and production data indicate they will), all known crude oil reserves under the WIPP, obtainable through current extraction technology, will be depleted within approximately 10 years, i.e., by 2026. This is well before the anticipated WIPP closure and start of the Active Institutional Controls (AICs) program called for in 40 CFR Part 194.41(b). In addition, gas resources, although more difficult to forecast, are not expected to last beyond 2137. Title 40 CFR 194.33 states, 'Inadvertent and intermittent intrusion by drilling for resources... is the most severe human intrusion scenario'. This human intrusion scenario is the feature, event, and process (FEP) that performance assessment (PA) has identified as having the most significant impact on radionuclide releases during the 10,000 year regulatory period for the WIPP. Title 40 CFR 194.43 requires a PICs program which contains '... [records] in the international archives that would likely be consulted by individuals in search of unexploited resources'. Due to political, social, and economic motivators for resource exploration and exploitation, the potential future absence of hydrocarbon resources under the WIPP is important in deterring possible human intrusion. To minimize the risk of future human intrusion, it may be necessary to consider actively removing as many of the exploitable hydrocarbon resources under and around a nuclear waste repository as is practicable before the end of the period of AICs (i.e., 100 years after closure of the repository). Additionally, communicating the absence of hydrocarbon resources under a nuclear repository should take a prominent role in any PICs program. Due to its high-cost nature, exploratory drilling of any kind currently involves cost/benefit analysis. If in the future the economic realities of resource exploration remain similar to today, and future oil companies know the resources for a particular area have already been heavily exploited, hypothetically, they would become less motivated to drill in that area. They would instead opt to explore an area with better prospects. It is important then that the remaining hydrocarbon reserves be clearly stated and prominently displayed. In essence we should communicate the message, loud and clear, 'There is nothing here for you'. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Traditional plant functional groups explain variation in economic but not size-related traits across the tundra biome

Aim: Plant functional groups are widely used in community ecology and earth system modelling to describe trait variation within and across plant communities. However, this approach rests on the assumption that functional groups explain a large proportion of trait variation among species. We test whether four commonly used plant functional groups represent variation in six ecologically important plant traits. Location: Tundra biome. Time period: Data collected between 1964 and 2016. Major taxa studied: 295 tundra vascular plant species. Methods: We compiled a database of six plant traits (plant height, leaf area, specific leaf area, leaf dry matter content, leaf nitrogen, seed mass) for tundra species. We examined the variation in species-level trait expression explained by four traditional functional groups (evergreen shrubs, deciduous shrubs, graminoids, forbs), and whether variation explained was dependent upon the traits included in analysis. We further compared the explanatory power and species composition of functional groups to alternative classifications generated using post-hoc clustering of species-level traits. Results: Traditional functional groups explained significant differences in trait expression, particularly among traits associated with resource economics, which were consistent across sites and at the biome scale. However, functional groups explained 19% of overall trait variation and poorly represented differences in traits associated with plant size. Post-hoc classification of species did not correspond well with traditional functional groups, and explained twice as much variation in species-level trait expression. Main conclusion: Traditional functional groups only coarsely represent variation in well-measured traits within tundra plant communities, and better explain resource economic traits than size-related traits. We recommend caution when using functional group approaches to predict tundra ecosystem change, or ecosystem functions relating to plant size, such as albedo or carbon storage. We argue that alternative classifications or direct use of specific plant traits could provide new insight for ecological prediction and modelling.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2017

Close Range Photogrammetry in Space - Measuring the On-Orbit Clearance between Hardware on the International Space Station

When photogrammetrists read an article entitled "Photogrammetry in Space" they immediately think of terrestrial mapping using satellite imagery. However in the last 19 years the roll of close range photogrammetry in support of the manned space flight program has grown exponentially. Management and engineers have repeatedly entrusted the safety of the vehicles and their crews to the results of photogrammetric analysis. In February 2010, the Node 3 module was attached to the port side Common Berthing Mechanism (CBM) of the International Space Station (ISS). Since this was not the location at which the module was originally designed to be located on the ISS, coolant lines containing liquid ammonia, were installed externally from the US Lab to Node 3 during a spacewalk. During mission preparation I had developed a plan and a set of procedures to have the astronauts acquire stereo imagery of these coolant lines at the conclusion of the spacewalk to enable us to map their as-installed location relative to the rest of the space station. Unfortunately, the actual installation of the coolant lines took longer than expected and in an effort to wrap up the spacewalk on time, the mission director made a real-time call to drop the photography. My efforts to reschedule the photography on a later spacewalk never materialized, so rather than having an as-installed model for the location of coolant lines, the master ISS CAD database continued to display an as-designed model of the coolant lines. Fast forward to the summer of 2015, the ISS program planned to berth a Japanese cargo module to the nadir Common Berthing Mechanism (CBM), immediately adjacent to the Node 3 module. A CAD based clearance analysis revealed a negative four inch clearance between the ammonia lines and a thruster nozzle on the port side of the cargo vehicle. Recognizing that the model of the ammonia line used in the clearance analysis was "as-designed" rather than "as-installed", I was asked to determine the real clearance between the ammonia lines and expected position of the thruster bell using existing on-orbit imagery. Imagery of the area of interest, taken several years earlier from the Space Shuttle during a fly-around of the ISS, was found and used to set a stereo pair. Space Vision System Targets and Handrail bolts measured in the ISS analytical coordinate system (ISSACS) prior to launch, were used to obtain an absolute orientation so all photogrammetric measurement's would be in the ISSACS coordinate system. Coordinates for the design location of the edges of the thruster bell, when the cargo vehicle was fully berthed to the ISS, were displayed in 3-D relative to the as-installed ammonia lines. This immediately revealed a positive clearance, which was later quantified to be a minimum of 10" +/0.5". The analysis was completed over a single weekend by a single analyst. Using updated imagery, acquired from the station's robotic arm, a complete as-installed model of the coolant lines was generated from stereo photography and replaced the design model in the master ISS CAD database.

Liddle, Donn↗
DOE OSTI2018

Alteration trends and geochemical source region characteristics preserved in the fluviolacustrine sedimentary record of Gale crater, Mars

The Mars Science Laboratory’s Chemistry and Camera (ChemCam) instrument suite on-board the Curiosity rover has analysed ~1200 sedimentary targets during the mission up to sol 1482. These targets have included sedimentary rock, diagenetic features (e.g., fracture-associated alteration halos, mineral veins, nodules, and erosion resistant raised ridges), active aeolian fines, soils and float. We have isolated ChemCam geochemical trends relating to diagenetic features and alteration products from those of the sedimentary rock in order to identify the compositional characteristics of Gale crater’s sediment source regions. The effects of grain size variation on sedimentary unit geochemistry have been taken into account by grouping and analysing geological units according to grain size. With obvious diagenetic features removed from the database, and predominately isochemical aqueous alteration inferred for the Mt Sharp Group samples, we propose that source region composition is a stronger source of geochemical change between the Bradbury and Mt Sharp Groups than open-system alteration. Additionally, a lack of correlation between the Chemical Index of Alteration (CIA) values and SiO 2 , MgO or FeO T indicates that the slight increase in chemical weathering of the Mt Sharp Group sediments was insufficient to overprint sediment source compositional signatures. This has led to the identification of five unique igneous endmember compositions which we hypothesise to have contributed to Gale crater’s stratigraphic record. These endmembers are: (1) a subalkaline basalt, compositionally similar to the tholeiitic Adirondack Class basalts of Gusev crater, and dominant within the finer grained units up to the base of Mt Sharp; (2) a trachybasalt, mostly identified within conglomerate units from the Darwin waypoint to the base of Mt Sharp; (3) a potassium-rich volcanic source, determined from strong potassium enrichment and a high abundance of sanidine that is most dominant in the fluvial sandstones and conglomerates of the Kimberley formation; (4) a highly evolved, silica-rich igneous source that correlates with the presence of tridymite, and is recorded in the lacustrine mudstone of Mt Sharp’s Marias Pass locality; and, (5) a fractionated, relatively SiO 2 -rich subalkaline basalt, seen to have influenced the composition of mudstone deposited in the lower part of the Mt Sharp Group. Endmembers (1), (2), (3), and (4) have previously been identified at specific waypoints along the rover’s traverse, but we show that their influence extends throughout Gale’s stratigraphic record. The occurrence of detected endmembers is also strongly correlated with stratigraphic position, which suggests changing sediment source regions with time. We conclude that Gale sediment provenances were much more varied than suggested by the largely homogenous, globally-distributed Martian basalt inferred from orbit, showing that complex magmatic assemblages exist within the ancient highland crust surrounding Gale.

58 GEOSCIENCES↗
DOE OSTI2023

Quantifying uncertainty in high-throughput density functional theory: A comparison of AFLOW, Materials Project, and OQMD

A central challenge in high-throughput density functional theory (HT-DFT) calculations is selecting a combination of input parameters and postprocessing techniques that can be used across all materials classes, while also managing accuracy-cost tradeoffs. To investigate the effects of these parameter choices, we consolidate three large HT-DFT databases: Automatic-FLOW (AFLOW), the Materials Project (MP), and the Open Quantum Materials Database (OQMD), and compare reported properties across each pair of databases for materials calculated using the same initial crystal structure. We find that HT-DFT formation energies and volumes are generally more reproducible than band gaps and total magnetizations; for instance, a notable fraction of records disagree on whether a material is metallic (up to 7%) or magnetic (up to 15%). The variance between calculated properties is as high as 0.105 eV/atom (median relative absolute difference, or MRAD, of 6%) for formation energy, 0.65 Å 3 / atom (MRAD of 4%) for volume, 0.21 eV (MRAD of 9%) for band gap, and 0.15 μB/ formula unit (MRAD of 8%) for total magnetization, comparable to the differences between DFT and experiment. Here, we trace some of the larger discrepancies to choices involving pseudopotentials, the DFT + U formalism, and elemental reference states, and argue that further standardization of HT-DFT would be beneficial to reproducibility.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Assessing the Use of UAS-Related Terms in ASRS Using Seed Topic Modeling

Context: The NASA Aviation Safety Reporting System (ASRS) is a voluntary confidential system that disseminates reports received from personnel involved in aviation operations after de-identifying them. These reports are used by the community to improve overall aviation system safety. Aim: We propose and execute an experiment to assess the use of seed term topic modeling over the database narratives to identify Unmanned Aircraft System (UAS) reports. The use of seed term topic modeling enables users to identify groups of conceptually similar narratives associated to a topic of their interest. Method: We use a collection of narratives, expert-selected words, and report metadata that separates UAS from non-UAS reports to assess if seed topic modeling can be used to improve ASRS searches. Results: For simpler queries, seed topic search observes a higher recall and lower precision than the existing DBOL (DataBase OnLine) search in operation. However, the best results are obtained when seed topic search is used as a search suggestion system to be executed on the DBOL. Conclusion: Utilizing a combination of both the existing method and the proposed method, users can expand their search vocabulary about subjects of interest while improving the quality of results.

Text Mining↗
DOE OSTI2018

Automated data processing architecture for the Gemini Planet Imager Exoplanet Survey

The Gemini Planet Imager Exoplanet Survey (GPIES) is a multiyear direct imaging survey of 600 stars to discover and characterize young Jovian exoplanets and their environments. We have developed an automated data architecture to process and index all data related to the survey uniformly. An automated and flexible data processing framework, which we term the Data Cruncher, combines multiple data reduction pipelines (DRPs) together to process all spectroscopic, polarimetric, and calibration data taken with GPIES. With no human intervention, fully reduced and calibrated data products are available less than an hour after the data are taken to expedite follow up on potential objects of interest. The Data Cruncher can run on a supercomputer to reprocess all GPIES data in a single day as improvements are made to our DRPs. A backend MySQL database indexes all files, which are synced to the cloud, and a front-end web server allows for easy browsing of all files associated with GPIES. To help observers, quicklook displays show reduced data as they are processed in real time, and chatbots on Slack post observing information as well as reduced data products. Together, the GPIES automated data processing architecture reduces our workload, provides real-time data reduction, optimizes our observing strategy, and maintains a homogeneously reduced dataset to study planet occurrence and instrument performance.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Aboveground biomass density models for NASA’s Global Ecosystem Dynamics Investigation (GEDI) lidar mission

NASA's Global Ecosystem Dynamics Investigation (GEDI) is collecting spaceborne full waveform lidar data with a primary science goal of producing accurate estimates of forest aboveground biomass density (AGBD). This paper presents the development of the models used to create GEDI's footprint-level (~25 m) AGBD (GEDI04_A) product, including a description of the datasets used and the procedure for final model selection. The data used to fit our models are from a compilation of globally distributed spatially and temporally coincident field and airborne lidar datasets, whereby we simulated GEDI-like waveforms from airborne lidar to build a calibration database. We used this database to expand the geographic extent of past waveform lidar studies, and divided the globe into four broad strata by Plant Functional Type (PFT) and six geographic regions. GEDI's waveform-to-biomass models take the form of parametric Ordinary Least Squares (OLS) models with simulated Relative Height (RH) metrics as predictor variables. From an exhaustive set of candidate models, we selected the best input predictor variables, and data transformations for each geographic stratum in the GEDI domain to produce a set of comprehensive predictive footprint-level models. We found that model selection frequently favored combinations of RH metrics at the 98th, 90th, 50th, and 10th height above ground-level percentiles (RH98, RH90, RH50, and RH10, respectively), but that inclusion of lower RH metrics (e.g. RH10) did not markedly improve model performance. Second, forced inclusion of RH98 in all models was important and did not degrade model performance, and the best performing models were parsimonious, typically having only 1-3 predictors. Third, stratification by geographic domain (PFT, geographic region) improved model performance in comparison to global models without stratification. Fourth, for the vast majority of strata, the best performing models were fit using square root transformation of field AGBD and/or height metrics. There was considerable variability in model performance across geographic strata, and areas with sparse training data and/or high AGBD values had the poorest performance. These models are used to produce global predictions of AGBD, but will be improved in the future as more and better training data become available.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

What Levels of Coupled Cluster Theory Are Appropriate for Transition Metal Systems? A Study Using Near-Exact Quantum Chemical Values for 3d Transition Metal Binary Compounds

Transition metal compounds are traditionally considered to be challenging for standard quantum chemistry approximations like coupled cluster (CC) theory, which are usually employed to validate lower level methods like density functional theory (DFT). To explore this issue, we present a database of bond dissociation energies (BDEs) for 74 spin states of 69 diatomic species containing a 3d transition metal atom and a main group element, in the moderately sized def2-SVP basis. The presented BDEs appear to have an (estimated) 3σ error less than 1 kJ/mol relative to the exact solutions to the nonrelativistic Born-Oppenheimer Hamiltonian. These benchmark values were used to assess the performance of a wide range of standard single reference CC models, as the results should be beneficial for understanding the limitations of these models for transition metal systems. We find that interactions between metals and monovalent ligands like hydride and fluoride are well described by CCSDT. Similarly, CCSDTQ appears to be adequate for bonds between metals and nominally divalent ligands like oxide and sulfide. However, interactions with polyvalent ligands like nitride and carbide are more challenging, with even CCSDTQ(P)Λ yielding errors on the scale of a few kJ/mol. We also find that many perturbative and iterative approximations to higher order terms either yield disappointing results or actually worsen the performance relative to the baseline low level CC method, indicating that complexity does not always guarantee accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

A patch-based pseudo-CT approach for MRI-only radiotherapy in the pelvis

Purpose: In radiotherapy based only on magnetic resonance imaging (MRI), knowledge about tissue electron densities must be derived from the MRI. This can be achieved by converting the MRI scan to the so-called pseudo-computed tomography (pCT). An obstacle is that the voxel intensities in conventional MRI scans are not uniquely related to electron density. The authors previously demonstrated that a patch-based method could produce accurate pCTs of the brain using conventional T{sub 1}-weighted MRI scans. The method was driven mainly by local patch similarities and relied on simple affine registrations between an atlas database of the co-registered MRI/CT scan pairs and the MRI scan to be converted. In this study, the authors investigate the applicability of the patch-based approach in the pelvis. This region is challenging for a method based on local similarities due to the greater inter-patient variation. The authors benchmark the method against a baseline pCT strategy where all voxels inside the body contour are assigned a water-equivalent bulk density. Furthermore, the authors implement a parallelized approximate patch search strategy to speed up the pCT generation time to a more clinically relevant level. Methods: The data consisted of CT and T{sub 1}-weighted MRI scans of 10 prostate patients. pCTs were generated using an approximate patch search algorithm in a leave-one-out fashion and compared with the CT using frequently described metrics such as the voxel-wise mean absolute error (MAE{sub vox}) and the deviation in water-equivalent path lengths. Furthermore, the dosimetric accuracy was tested for a volumetric modulated arc therapy plan using dose–volume histogram (DVH) point deviations and γ-index analysis. Results: The patch-based approach had an average MAE{sub vox} of 54 HU; median deviations of less than 0.4% in relevant DVH points and a γ-index pass rate of 0.97 using a 1%/1 mm criterion. The patch-based approach showed a significantly better performance than the baseline water pCT in almost all metrics. The approximate patch search strategy was 70x faster than a brute-force search, with an average prediction time of 20.8 min. Conclusions: The authors showed that a patch-based method based on affine registrations and T{sub 1}-weighted MRI could generate accurate pCTs of the pelvis. The main source of differences between pCT and CT was positional changes of air pockets and body outline.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Metagenomic clustering links specific metabolic functions to globally relevant ecosystems

ABSTRACT Metagenomic sequencing has advanced our understanding of biogeochemical processes by providing an unprecedented view into the microbial composition of different ecosystems. While the amount of metagenomic data has grown rapidly, simple-to-use methods to analyze and compare across studies have lagged behind. Thus, tools expressing the metabolic traits of a community are needed to broaden the utility of existing data. Gene abundance profiles are a relatively low-dimensional embedding of a metagenome’s functional potential and are, thus, tractable for comparison across many samples. Here, we compare the abundance of KEGG Ortholog Groups (KOs) from 6,539 metagenomes from the Joint Genome Institute’s Integrated Microbial Genomes and Metagenomes (JGI IMG/M) database. We find that samples cluster into terrestrial, aquatic, and anaerobic ecosystems with marker KOs reflecting adaptations to these environments. For instance, functional clusters were differentiated by the metabolism of antibiotics, photosynthesis, methanogenesis, and surprisingly GC content. Using this functional gene approach, we reveal the broad-scale patterns shaping microbial communities and demonstrate the utility of ortholog abundance profiles for representing a rapidly expanding body of metagenomic data. IMPORTANCE Metagenomics, or the sequencing of DNA from complex microbiomes, provides a view into the microbial composition of different environments. Metagenome databases were created to compile sequencing data across studies, but it remains challenging to compare and gain insight from these large data sets. Consequently, there is a need to develop accessible approaches to extract knowledge across metagenomes. The abundance of different orthologs (i.e., genes that perform a similar function across species) provides a simplified representation of a metagenome’s metabolic potential that can easily be compared with others. In this study, we cluster the ortholog abundance profiles of thousands of metagenomes from diverse environments and uncover the traits that distinguish them. This work provides a simple to use framework for functional comparison and advances our understanding of how the environment shapes microbial communities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Determinants of the Pace of Global Innovation in Energy Technologies

Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970–2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Legacy Metal Fuel Data Exploration for Commercial Scale-Up

This work was based DOE-NE GAIN small buisness voucher award to Argonne. Argonne has started the CRADA activities with discussing information regarding Oklo's specific fast reactor design, and established the key fuel design data needs to support Oklo's licensing related activities. It was established that Oklo's design utilizes metallic fuel, and that their data needs are focused on data relevant to the fuel system irradiations at EBR-II to specific fuel burnup range.. Those data were part of the existing metallic fuel irradiation database available at Argonne.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Los Alamos Enterprise Analysis and Data System (LEADS)

The Los Alamos Enterprise Analysis and Data System (LEADS) is an integrated database system and analysis application used to examine the Laboratory’s assets and equities. The data mapping framework is structured to follow laboratory organizations, programs, geographical technical areas, and other functional groupings, such as facilities and equipment. LEADS application goal is to quantify the size and information related to the current condition of assets and equities. The data and inter-dependent relationships allow for insights and further analyses to be conducted of current program-of-records, the laboratory agenda, and “what-if” scenario studies. The understanding and the outputs of this application will support understanding of the laboratory’s current state, planning, and decision-making processes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Ab initio equation of state for vanadium

Accurate materials’ equations of state (EOS) are essential for understanding materials properties as well as for use in multiphysics simulations. In particular, hydrodynamics simulations are based on three fundamental conservation laws (mass, momentum and energy) that form an under-determined system of equations. The equation of state serves as an additional closure relation between thermodynamic variables for a given material that enables numerical hydrodynamics simulation. In this report, we focus on the development of an ab initio EOS for the body centered cubic (BCC) phase of Vanadium (V) for eventual integration into a multiphase EOS in the OpenSesame EOS database.

36 MATERIALS SCIENCE↗