Results for “program impact” — Page 80

NASA NTRS1973

Evaluation of dispersion strengthened nickel-base alloy heat shields for space shuttle application

The work reported constitutes the first phase of a two-phase program. Vehicle environments having critical effects on the thermal protection system are defined; TD Ni-20Cr material characteristics are reviewed and compared with TD Ni-20Cr produced in previous development efforts; cyclic load, temperature, and pressure effects on TD Ni-20Cr sheet material are investigated; the effects of braze reinforcement in improving the efficiency of spotwelded, diffusion-bonded, or seam-welded joints are evaluated through tests of simple lap-shear joint samples; parametric studies of metallic radiative thermal protection systems are reported; and the design, instrumentation, and testing of full-scale subsize heat shield panels are described. Tests of full-scale subsize panels included simulated meteoroid impact tests; simulated entry flight aerodynamic heating in an arc-heated plasma stream; programmed differential pressure loads and temperatures simulating mission conditions; and acoustic tests simulating sound levels experienced by heat shields during about boost flight. Test results are described, and the performances of two heat shield designs are compared and evaluated.

Johnson, R., Jr.↗

NASA NTRS2008

Lunar RFC Reliability Testing for Assured Mission Success

NASA's Constellation program has selected the closed cycle hydrogen oxygen Polymer Electrolyte Membrane (PEM) regenerative Fuel Cell (RFC) as its baseline solar energy storage system for the lunar outpost and manned rover vehicles. Since the outpost and manned rovers are "human-rated", these energy storage systems will have to be of proven reliability exceeding 99 percent over the length of the mission. Because of the low (TRL=5) development state of the closed cycle hydrogen oxygen PEM RFC at present, and because there is no equivalent technology base in the commercial sector from which to draw or infer reliability information from, NASA will have to spend significant resources developing this technology from TRL 5 to TRL 9, and will have to embark upon an ambitious reliability development program to make this technology ready for a manned mission. Because NASA would be the first user of this new technology, NASA will likely have to bear all the costs associated with its development. When well-known reliability estimation techniques are applied to the hydrogen oxygen RFC to determine the amount of testing that will be required to assure RFC unit reliability over life of the mission, the analysis indicates the reliability testing phase by itself will take at least 2 yr, and could take up to 6 yr depending on the number of QA units that are built and tested and the individual unit reliability that is desired. The cost and schedule impacts of reliability development need to be considered in NASA's Exploration Technology Development Program (ETDP) plans, since life cycle testing to build meaningful reliability data is the only way to assure "return to the moon, this time to stay, then on to Mars" mission success.

Bents, David J.↗

NASA NTRS2006

Impact Testing of Orbiter Thermal Protection System Materials

This viewgraph presentation reviews the impact testing of the materials used in designing the shuttle orbiter thermal protection system (TPS). Pursuant to the Columbia Accident Investigation Board recommendations a testing program of the TPS system was instituted. This involved using various types of impactors in different sizes shot from various sizes and strengths guns to impact the TPS tiles and the Leading Edge Structural Subsystem (LESS). The observed damage is shown, and the resultant lessons learned are reviewed.

Kerr, Justin↗

NASA NTRS1984

Water impact laboratory and flight test results for the space shuttle solid rocket booster aft skirt

A series of water impact tests was conducted using full-scale segment representations of the Space Shuttle Solid Rocket Booster (SRB) aft skirt structure. The baseline reinforced structural design was tested as well as various alternative design concepts. A major portion of the test program consisted of evaluating foam as a load attenuation material. Applied pressures and response strains were measured for impact velocities from 40 feet per second (ft/s) to 110 ft/s. The structural configurations, test articles, test results, and flight results are described.

Kross, D. A.↗

NASA NTRS2003

Microbeam Investigations of Presolar and Early Solar System Materials

This grant provided three years of funding to initiate an independent research program in Cosmochemistry at Arizona State University. Because the new equipment that was installed at ASU took longer than expected to get running, the project was extended for a fourth year with no additional funding. By the time the funds were expended, we had set up an entirely new ion microprobe laboratory at ASU, and we have been fully operational for over two years. This laboratory was funded in almost equal parts by NASA, NSF, and ASU. Papers describing the first results from this new laboratory are being published now, and the results have been making an impact on the Cosmochemistry community. While this laboratory was being built, I continued my research program in collaboration with G. J. Wasserburg at Caltech. As equipment became available, I gradually shifted my research to ASU. Over the lifetime of this grant, my research program resulted in 12 papers and 13 abstracts on topics ranging from presolar grains (2 papers, 3 abstracts), short-lived radionuclides (6 papers, 6 abstracts), chemical compositions of chondritic materials (3 papers, 3 abstracts), silicon isotopic fractionation (1 abstract), and the oxygen composition of the Sun (1 paper). The most important results of this period were the discovery of presolar hibonite in a meteorite residue, the measurement of 26A1 in CAIs from enstatite chondrites, and the measurements of 10Be in type A CAIs from CV chondrites. All of these results have had a significant impact on research in Cosmochemstry.

Huss, Gary R.↗

NASA NTRS1972

Millimeter wave space communications - Recent experimental results and present development programs.

Major results of millimeter wave propagation measurements conducted with the ATS-5 satellite are reviewed, and their impact on the design of operational millimeter wave communications systems is evaluated. Statistical results show attenuation probabilities in different localities at various intervals of observation in an attempt at correlation with precipitation conditions. Advanced millimeter wave propagation experiments currently under development for the ATS-F satellite are also discussed.

Ippolito, L. J.↗

NASA NTRS1974

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix E: EOS program supporting system. Part 1: System trade studies no. 1 through 8

The design requirements and associated cost impacts for using the space shuttle to deliver the Earth Observatory Satellite (EOS) are identified. The additional impact of achieving full compatibility for resupply and retrieval is considered. Based on the results of the analysis, it is concluded that the EOS-Shuttle compatibility can be realized with reasonable spacecraft weight and cost penalties. Inherent space shuttle capabilities are adequate to meet the requirements of all missions except E and F. Mission E (Tiros 0) may be accommodated by either an EOS orbit transfer capability or a tug. The tug appears to be the only viable approach to satisfying the mission F (SEOS) requirements.

Source record↗

NASA NTRS1978

Review of the Air Force summer study program on the integration of wind tunnels and computers

The present state of computational fluid dynamics and its impact on the design cycle and computer requirements for future developments in this field were explored. The increase in productivity and efficiency which experimental facilities can achieve by a close integration with computers was investigated together with possible improvements in simulation quality of wind tunnels in conjunction with computer control. Research experiments are outlined to provide a better understanding of the physics of fluid flow and to assist in the modeling of these phenomena for computational methods, with primary emphasis on turbulent flows.

Marschner, B. W.↗

NASA NTRS1978

Impact of Balance Of System (BOS) costs on photovoltaic power systems

The Department of Energy has developed a program to effect a large reduction in the price of photovoltaic modules, with significant progress already achieved toward the 1986 goal of 50 cents/watt (1975 dollars). Remaining elements of a P/V power system (structure, battery storage, regulation, control, and wiring) are also significant cost items. The costs of these remaining elements are commonly referred to as Balance-of-System (BOS) costs. The BOS costs are less well defined and documented than module costs. The Lewis Research Center (LeRC) in 1976/77 and with two village power experiments that will be installed in 1978. The costs were divided into five categories and analyzed. A regression analysis was performed to determine correlations of BOS Costs per peak watt, with power size for these photovoltaic systems. The statistical relationship may be used for flat-plate, DC systems ranging from 100 to 4,000 peak watts. A survey of suppliers was conducted for comparison with the predicted BOS cost relationship.

Hein, G. F.↗

NASA NTRS2011

Ares I-X Range Safety Analyses Overview

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Starr, Brett R.↗

NASA NTRS2011

Ares I-X Range Safety Flight Envelope Analysis

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Starr, Brett R.↗

NASA NTRS2009

International Space Weather Initiative (ISWI)

The International Heliophysical Year (IHY), an international program of scientific collaboration to understand the external drivers of planetary environments, has come to an end. The IHY was a major international event of great interest to the member States, which involved the deployment of new instrumentation, new observations from the ground and in space, and an education component. We propose to continue the highly successful collaboration between the heliophysics science community and the United Nations Basic Space Science (UNBSS) program. One of the major thrust of the IHY was to deploy arrays of small instruments such as magnetometers, radio antennas, GPS receivers, all-sky cameras, particle detectors, etc. around the world to provide global measurements of heliospheric phenomena. The United Nations Basic Space Science Initiative (UNBSSI) played a major role in this effort. Scientific teams were organized through UNBSS, which consisted of a lead scientist who provided the instruments or fabrication plans for instruments in the array. As a result of the this program, scientists from UNBSS member states now participate in the instrument operation, data collection, analysis, and publication of scientific results, working at the forefront of science research. As part of this project, support for local scientists, facilities and data acquisition is provided by the host nation. In addition, support at the Government level is provided for local scientists to participate. Building on momentum of the IHY, we propose to continue the highly successful collaboration with the UNBSS program to continue the study of universal processes in the solar system that affect the interplanetary and terrestrial environments, and to continue to coordinate the deployment and operation of new and existing instrument arrays aimed at understanding the impacts of Space Weather on Earth and the near-Earth environment. Toward this end, we propose a new program, the International Space Weather Initiative (ISWI).

Davila, Joseph M.↗

NASA NTRS2010

International Space Weather Initiative (ISWI)

The International Heliophysical Year (IHY), an international program of scientific collaboration to understand the external drivers of planetary environments, has come to an end. The IHY was a major international event of great interest to the member States, which involved the deployment of new instrumentation, new observations from the ground and in space, and an education component. We propose to continue the highly successful collaboration between the heliophysics science community and the United Nations Basic Space Science (UNBSS) program. One of the major thrust of the IHY was to deploy arrays of small instruments such as magnetometers, radio antennas, GPS receivers, all-sky cameras, particle detectors, etc. around the world to provide global measurements of heliospheric phenomena. The United Nations Basic Space Science Initiative (UNBSSI) played a major role in this effort. Scientific teams were organized through UNBSS, which consisted of a lead scientist who provided the instruments or fabrication plans for instruments in the array. As a result of the this program, scientists from UNBSS member states now participate in the instrument operation, data collection, analysis, and publication of scientific results, working at the forefront of science research. As part of this project, support for local scientists, facilities and data acquisition is provided by the host nation. In addition, support at the Government level is provided for local scientists to participate. Building on momentum of the IHY, we propose to continue the highly successful collaboration with the UNBSS program to continue the study of universal processes in the solar system that affect the interplanetary and terrestrial environments, and to continue to coordinate the deployment and operation of new and existing instrument arrays aimed at understanding the impacts of Space Weather on Earth and the near-Earth environment. Toward this end, we propose a new program, the International Space Weather Initiative (ISWI).

Davila, Joseph↗

NASA NTRSDate not supplied

Leveraging Nurse Informaticists for Development of the Impact Tool

The American Nurses Association (ANA) defines nursing informatics as the integration of “nursing science, computer science, and information science to manage and communicate data, information, knowledge, and wisdom in nursing practice. [1]” In additional to nursing education and clinical experience, this field requires additional education in areas of data analysis, database management, and clinical information systems. Nursing informaticists help bridge the communication gap between clinical and technical stakeholders which help align common goals. NASA is currently developing a new medical system trade analysis and decision support tool called IMPACT (Informing Mission Planning via Analysis of Complex Tradespaces). The development team is comprised of multiple specialties including but not limited to clinicians (pharmacists, physicians, and nurse informaticists), software and program developers, human factors experts, and engineers. The nurse informaticists play a significant role in the development, operation, and results interpretation of IMPACT. Their expert knowledge and skills in both clinical nursing, information science, and database management place them in a unique position to collaborate and integrate with the clinical, engineering, and software development members of the team to achieve a cohesive, functional, and user-friendly model.

Lynn Boley↗

DOE OSTI2024

Port Electrification Handbook: A Reference to Aid U.S. Port Energy Transitions

Port electrification can take many forms, such as electrifying cargo handling equipment or deploying a microgrid to power critical port infrastructure. To help evaluate the growing challenge of increased electrification and its impacts on the system, the U.S. Department of Energy, Office of Electricity’s Microgrids R&D [research and development] program created this Port Electrification Handbook through a project led by Pacific Northwest National Laboratory. The goals of this handbook are the following: help port operators and planners evaluate different electrification technologies, explain how these technologies could aid and impact ports and surrounding communities, provide step-by-step considerations for port electrification.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2020

Investing in STEM Benefits Community, Company, and Industry - 20243

Like many organizations and groups, the Department of Energy Environmental Management program and the nuclear industry are facing an aging employee population and record numbers of employee retirements. This 'silver tsunami' of retirees means the industry as a whole is recruiting graduates at a fast pace. So, how do we ensure the nuclear industry has a robust pipeline of graduates with the necessary background? Fluor Idaho's investment in science, technology, engineering, and mathematics (STEM) education programs helps promote the next generation of technical professionals, benefiting both the company and the industry. Through community outreach initiatives and student mentoring programs, Fluor Idaho promotes kids' interest in STEM. The programs are designed to spark STEM interest in grade school and then foster and grow that interest through high school and higher education. After igniting student excitement about STEM topics in school, Fluor Idaho focuses on providing work-specific opportunities including mentoring and intern programs. These programs give students a better look at real-world job opportunities while still stimulating their interest in STEM. These programs ultimately provide career opportunities for the students and a pipeline of workers. Fluor Idaho's strategy for its summer interns has been to place students in a wide variety of projects - from the commissioning of a first-of-a-kind nuclear processing facility, to operating nuclear waste management facilities, to developing computer programs and applications - and give them responsibilities that make them feel like valued contributors. This approach has created a positive and rewarding summer-intern program experience for the students. Fluor Idaho's investment in its future today is reducing the knowledge gap - or cliff - that many contractors in the nuclear industry are facing. It's a worthwhile investment that is readily visible within its many cleanup projects. The next generation of technical professionals is making an impact now - benefiting both the company and the nuclear industry. This paper will review Fluor Idaho's programs, including STEM community outreach and education and mentoring programs. It will also present statistics about the reach of those programs and their successes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Parametric study of an acid baking process for rare earth element recovery from a bituminous-coal source

Acid baking treatment is widely used to extract rare earth elements (REEs) from refractory rare earth bearing minerals such as monazite and xenotime. Since these REE minerals have been identified in coal-based sources, a parametric study was conducted to evaluate the impact and optimize the parametric values associated with the acid-baking process when treating a bituminous coal source. The parameters studied using a three-level statistical experimental program were acid baking time, acid solution concentration, baking temperature, and acid solution-to-solids ratio and each were found to significantly impact REE and contaminant element recovery. An increase in baking temperature up to around 250°C improved the light and heavy REE recovery values by more than 50 absolute percentage points relative to performances achieved when direct leaching. Acid baking was needed to dehydroxylate the clays and liberate the REE minerals, which allowed access for the acid to solubilize the REEs. Acid concentration of the solution used for acid baking was studied as a means of minimizing the amount of acid needed to achieve a target REE recovery. However, thermo-gravimetric and differential scanning calorimetry analysis (TGA-DSC) of sulfuric acid under oxidizing atmosphere revealed that the addition of water decreased the evaporation temperature, which explains the lower REE recovery values obtained when using lower acid concentrations. Using pure sulfuric acid at an acid-to-solid ratio of 0.8:1 resulted in recovery values of around 70% for both LREEs and HREEs. The decomposition reaction time was relatively quick with 65% of the TREEs recovered within the first 10 minutes. Water leaching experiments performed on the acid-baked products under a temperature of 25°C instead of 75°C revealed an increase in REE recovery by 10 absolute percentage points, which was likely due to the high solubility of REE-sulfates at room temperatures.

01 COAL, LIGNITE, AND PEAT↗

NASA NTRS2022

Impact Simulation of Composite Panels for Aerospace Applications

The aerospace research community has been working towards the development of a comprehensive framework for the design of composite structures at the component, subassembly, assembly, and system levels. Such a framework requires accurate, efficient and easy-to-use mathematical and computational models that are in sync with physical reality. The research work in this paper is designed to help an aerospace structural engineer move towards this goal by simulating dynamic impact to composite panels. First, the existing orthotropic visco-elastic visco-plastic material model in LS-DYNA commercial finite element program, MAT_COMPOSITE_TABULATED_PLASTICITY_DAMAGE (MAT_213) is enhanced with the development and use of rate-dependent damage data. Using state-of-the-art experimental procedures, impact validation test data are created. Second, the versatility of the constitutive model is examined by its ability to simulate a low velocity (27 ft/s, 8 m/s) impact test, and two high velocity impact tests (385–417 ft/s, 117–127 m/s) that straddle the ballistic limit of the projectile and the composite panels. Third, these impact events are modeled using three different finite element types – under-integrated and fully-integrated solid elements, and fully-integrated thin shell elements. Insight into accuracy versus numerical efficiency is gained by comparing the performance of solid versus thin shell elements. The numerical results show that accurate predictions of these impact events can be obtained with reasonable effort and care.

Simulations↗