Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “product development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Special Analysis: 2016-002, Analysis of Cover Erosion and Enhanced Infiltration at Pit 25, TA-54 Area G

The Los Alamos National Laboratory (LANL) generates radioactive waste as a result of various activities. Operational waste is generated from a wide variety of research and development activities including nuclear weapons development, energy production, and medical research. Environmental restoration, and decontamination and decommissioning (D&D) waste is generated as contaminated sites and facilities at LANL undergo cleanup or remediation. The majority of this waste is low-level radioactive waste (LLW) and is disposed of at the Technical Area 54 (TA-54), Area G disposal facility. U.S. Department of Energy (DOE) Order 435.1 (DOE, 2001) requires that radioactive waste be managed in a manner that protects public health and safety, and the environment. To comply with this order, DOE field sites must prepare site-specific radiological performance assessments for LLW disposal facilities that accept waste after September 26, 1988. Furthermore, sites are required to conduct composite analyses that account for the cumulative impacts of all waste that has been (or will be) disposed of at the facilities and other sources of radioactive material that may interact with the facilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Integrated Oxygen Production and CO 2 Separation through Chemical Looping Combustion with Oxygen Uncoupling (Final Report)

The project "Integrated Oxygen Production and CO 2 Separation through Chemical Looping Combustion with Oxygen Uncoupling" focused on advancing fluidized bed chemical looping combustion technology to semi-pilot scale. An important aspect of technology scale-up is production of well-performing oxygen carrier materials economically and at a scale sufficient for industrial-scale systems. Under this program, a new technique for oxygen carrier production was developed and a prototype system capable of producing up to 150 lb per batch of oxygen carrier was constructed. Chemical looping combustion testing was performed in a large process development unit designed for operation at more than 200 kW using coal as fuel. Complementary evaluation of carbon conversion pathways was conducted and quantitative analysis of the fate of carbon in a CLOU-based chemical looping system was performed. As an aid for design, optimization, troubleshooting and scale-up, robust CFD models for fluidized bed chemical looping combustion systems were developed.

01 COAL, LIGNITE, AND PEAT↗

Recovery of Mo in LEU-Modified Cintichem Process at Elevated Mo Concentrations

Argonne National Laboratory with support from DOE’s National Nuclear Security Administration Office of Material Management & Minimization (M 3 ) is helping SHINE Medical Technologies in developing domestic production of Mo-99. SHINE is planning to produce Mo-99 by fission of low enriched uranium-235 (LEU) in a subcritical aqueous solution using accelerator-based neutron generation. SHINE’s subcritical system can contain ~250L of LEU solution that is processed through a recovery titania-based column to recover Mo, while the remaining LEU solution can be available for another irradiation. The Mo-containing solution is then fed into another titania-based concentration column to further concentrate the solution to allow for the final purification step using the LEU modified Cintichem (LMC) process. The LMC process is a relatively small-scale process that was designed to work with 50mL volumes. By concentrating the Mo solution that feeds into the LMC process from ~250L to ~50mL, the actual chemical concentration of Mo becomes important. It is estimated that up to ~15mM Mo concentration could be present in the LMC feed. Since the LMC process was originally proposed for purification of Mo after dissolution of irradiated U solid targets, the chemical concentration of Mo was not a concern, due to presence of only trace amounts of Mo.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preparation of Mesophase Pitch Feedstock for Carbon Fiber

A filtration process of the low cost mesophase pitch developed by Advanced Carbon Products, LLC (ACP) was developed. The mesophase pitch was melt spun into fiber at the University of Kentucky Center for Applied Energy Research (UKY), and converted to carbon fiber. The melt spinning process was moderately stable, but resulted in some void structure in the green fibers. The tensile properties of the resulting carbon fibers, after graphitization heat treatment, were tested yielding a modulus value of approximately 560 GPa or 81 MSI. This demonstrated that a high modulus graphitic carbon fiber is certainly possible from the ACP 20 mesophase pitch. For future work, a better balance between the softening point temperature, the spinning temperature, and filtering must be met to reduce the volatiles generated in the pitch during spinning. This would reduce voids in the fiber, facilitate spinning, and generate finer, higher performance graphitic fiber.

36 MATERIALS SCIENCE↗

Filter Adapters for BI-PAP and CPAP Equipment

Researchers at Los Alamos National Laboratory are researching and designing technology intended to help reduce the exposure of patients and medical staff to pathogens, such as SARS-CoV-2, while providing medical staff the dexterity and flexible work conditions necessary to conduct routine and complex patient care on infected patients. This investigative technology would potentially enable hospitals to adapt, utilize, and repurpose existing Bilevel Positive Airway Pressure (BiPAP) or Continuous Positive Airway Pressure (C-PAP) equipment in the fight against COVID-19, which would potentially save hospitals significant money, reduce exposure to staff and patients, and increase the supply of critically needed devices at a time when supplies are scarce in the market place. A provisional patent has been filed on the technology and we are seeking a commercialization partner to license and further develop the product for commercial purposes, including processing the device through the FDA emergency use authorization or clearance process. One hospital system has indicated that upon FDA authorization or clearance, it would have interest in the product.

42 ENGINEERING↗

Air Evacuation Bridge

Researchers at Los Alamos National Laboratory are researching and designing technology intended to help reduce the exposure of patients and medical staff to pathogens, such as SARS-CoV-2 while providing medical staff the dexterity and flexible work conditions necessary to conduct routine and complex patient care on infected patients. This investigative technology would potentially enable hospitals to adapt, utilize, and re-purpose existing and otherwise infrequently used equipment in the fight against COVID-19, thereby saving hospitals significant money, reducing exposure to staff and patients, and increasing the supply of critically needed devices at a time when supplies are scarce in the market place. A provisional patent has been filed on the technology and we are seeking a commercialization partner to license and further develop the product for commercial purposes, including processing the device through the FDA authorization or clearance process. Once FDA has cleared the product, at least one hospital system has expressed interest in the experimental test components for use in their hospitals.

42 ENGINEERING↗

Second group of irradiation capsules: property data of irradiated welded stainless steel 347 and irradiated, welded, and hydrogen charged Zircaloy-4 for SHINE

Zircaloy-4 and AISI 347 stainless steel were irradiated to low doses (10 20 and 10 21 n/cm 2 ) at low temperature (~60°C) in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). These materials were under consideration for some of the structural components of the medical isotope production facility developed by SHINE Technologies. Zircaloy-4 base metal, as welded, welded and post-weld heat treated (PWHT), and hydrogen charged samples were irradiated. AISI 347 base metal from Sandmeyer Steel, Penn Stainless, and Rolled Alloys suppliers were irradiated. AISI 347 gas tungsten arc welding (GTAW) and flux-cored arc welding (FCAW) samples of Penn Stainless and Rolled Alloys were also irradiated. The irradiated materials were tested with microhardness and tensile tests at room temperature in air. The AISI 347 materials had more elongation after irradiation than the Zircaloy-4 materials. In fact, the Zircaloy-4 welded without PWHT and with H charging had the lowest elongation of any of the materials. This report is the final in a series of reports on this project.

36 MATERIALS SCIENCE↗

Physical Sciences Vistas: Perspectives on Simultaneous Excellence (Issue 1, 2023)

The issue begins with an article highlighting Physics Division’s involvement in diagnostic development that led to the measurement of ignition at the National Ignition Facility at Lawrence Livermore National Laboratory. Subsequent articles transition to some of the materials development occurring in Sigma, Materials Science and Technology, and Materials Physics and Applications divisions. This is inclusive of the development of next generation moderator materials as an enabling technology of small modular reactors. These materials will most likely be qualified at a facility at Idaho National Laboratory. The issue also highlights development of novel, additively manufactured foams for next generation weapons. This work is being done in close collaboration with the Kansas City National Security Campus to enable transition of materials development to production in a more agile way. Finally, an article describes Accelerator Operations and Technology Division’s hard work to replace the legacy remote instrumentation and control equipment at the Los Alamos Neutron Science Center (LANSCE) with a modern control system. The story discusses how that engineering success will lead to improved sustainability of the beam during operation and thus a better experience for all of our collaborators and partners in the LANSCE user program.

36 MATERIALS SCIENCE↗

Addressing Regulatory Burdens to Accessing Solar Among Municipal, Commercial and Institutional Customers Through Collaborative Partnerships (Final Technical Report)

The project focused on providing education to large energy customers, with a focus on local governments, to help them better understand and overcome barriers to solar energy adoption that currently exist (or could exist) in utility planning processes and/or within wholesale energy markets. The project team created accessible educational materials — ranging from reports to case studies to webinars — that could connect with stakeholders who rarely engage in these venues, have limited bandwidth to do so, and possess little previous knowledge of these issues. The project team focused on sharing lessons learned and best practices based on the experiences of other local governments and large energy users that have engaged on these issues, including the PJM Cities and Communities Coalition (PJMCCC). The project sought to better connect these customers and other stakeholders to deepen and expand opportunities for them to engage together on these issues, as well as build peer networks to facilitate the exchange of information. The project team held convenings of key partners — such as local governments, developers, regulators, utilities and large solar buyers — to discuss best practices, develop research products to broaden stakeholders’ knowledge base, and to foster these peer networks.

14 SOLAR ENERGY↗

Basin-Scale Relicensing Opportunity Product User Guide

The Basin-Scale Relicensing Opportunity products provide a platform for identifying favorable areas for basin-wide collaboration using metrics derived from anticipated Federal Energy Regulatory Commission (FERC) relicensing dates. The hydropower relicensing process requires long-term resource allocation by agencies, hydropower owner/operators, non-governmental organizations, and tribal, state, and federal governments. Basin-scale hydropower relicensing has begun to receive attention as a potential solution for reducing licensing timelines, costs, and uncertainty which can provide benefits to a broad spectrum of participants in the licensing process. Two products were developed: (1) an interactive web map that allows users to browse facilities and rivers of interest and uncover locations for potential collaboration based on FERC relicensing metrics summarized along river reaches and (2) a spreadsheet that contains 1,261 facilities with associated FERC relicensing metrics and that allows users to join these data to others and develop and conduct their own analyses.

13 HYDRO ENERGY↗

Technology in Focus: Power-to-X

Power-to-X is the process that converts electricity into energy carriers that can be used in industries and applications not connected to the electricity grid. By creating a product with direct process connected generation, contracted generation, or grid-delivered electricity that is in excess of current demand, production of electricity can be managed to time arbitrage energy and mitigate generation curtailment or inefficient operational reductions. In addition, creating a product potentially develops a secondary revenue stream that aids economics of the facility. This document is a high-level factsheet that provides an overview of what Power-to-X is and what it means.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Broad Spectrum Antifungal Pond Protection

To decrease operating costs associated with fungal infections in algal crops used for biofuel production, we developed bacterial consortia that displayed antifungal properties. These bacteria were grown in culture with algae species without any additional operating costs or need for re-inoculation with bacteria. These co-cultures maintained their antifungal properties for the entirety of the project period and increased mean time to failure (MTTF) by up to 350% when challenged with high levels of fungal pests. Multiple fungal and fungus-like pests were tested and the consortia showed efficacy against three species.

60 APPLIED LIFE SCIENCES↗

Quantitative Assessment of Parent Well Effect on Hydraulic Fracture Propagation at HFTS2: Insights from Cross-Well Strain Measurements and Microseismic Data

Understanding fracture propagation behavior is essential for optimizing hydraulic fracturing in unconventional reservoirs. This study demonstrates the value of integrating Low-Frequency Distributed Acoustic Sensing (LF-DAS) and microseismic data, which together provide a more complete picture of fracture growth. Using data from Hydraulic Fracturing Test Site 2 (HFTS2), we identify stress changes in depletion zones induced by parent wells as a key factor influencing fracture propagation. This result is shown by new measurements of in-situ fracture propagation velocity and fracture-hit volume (fluid volume at fracture hit?) from LF-DAS and event density from microseismic. These findings highlight the importance of considering parent well effects, well spacing, and stimulation sequencing in completion design to improve reservoir development and production efficiency.

depletion zones↗

Informed Critical Mineral Recovery from Fossil Energy Waste Feedstocks

Critical minerals (CM), such as rare earth elements (REE), cobalt, nickel, and lithium, have important uses in modern energy and technologies, yet are vulnerable to potential supply chain disruptions. One potential domestic CM source is fossil energy wastes, such as coal combustion ash, acid mine drainage (AMD) and treatment solids (AMD solids), and Oil and Gas (O&G) drilling wastes (drill cuttings and produced waters). CM recovery from these feedstocks is promising due to their abundant quantity and fast availability as waste products. To develop informed and effective CM recovery, DOE’s National Energy Technology Laboratory (NETL) have collected and analyzed CM data for aforementioned fossil energy wastes, and utilized advanced geochemical characterization (e.g., synchrotron microprobe, sequential extraction and geochemical modeling) to identify the CM speciation and binding environments. Novel methods that recover multiple CMs while co-producing other valuable byproducts from these feedstocks have been developed. Successful examples include: (1) the discovery of easily mobile REE phases in Ca-rich coal combustion ash resulted in a patented REE recovery process from the ash feedstock while producing zeolite sorbents from the extraction wastes; (2) the successful identification of REE/Co/Ni/Zn hosting phases in acid mine drainage treatment solids (AMD solids) has informed the sequential CM recovery from AMD solids and has inspired lithium sorbent development from the extraction wastes; (3) the recovery potential of Li and other CMs in O&G produced waters and drill cuttings has been explored while the extraction residuals have been demonstrated to support plant growth as soil supplements. The innovations driven by characterization information have the potential to maximize CM recovery revenue, offset the cost of waste management and wastewater treatments while reducing the cost and environmental footprint of CM extraction.

characterization and extraction of rare earth elem↗