Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

CO Oxidation Catalyzed by Au Dispersed on SBA-15 Modified with TiO2 Films Grown via Atomic Layer Deposition (ALD)

It has been established that gold, when in nanoparticle (NP) form and in contact with reducible oxides, can promote oxidation reactions under mild conditions. Here, we report results from our exploration of the catalytic oxidation of carbon monoxide using catalysts where Au NPs were combined with thin titanium oxide films deposited on SBA-15 using atomic layer deposition (ALD). Both orders of deposition, with TiO2 added either before or after Au dispersion, were tested for two titania film thicknesses amounting to about half and full TiO2 monolayers. The resulting catalysts were characterized using various techniques, mainly electron microscopy and N2 adsorption–desorption isotherms, and the kinetics of the oxidation of CO with O2 were followed using infrared absorption spectroscopy. A synergy between the Au and TiO2 phases as it relates to the bonding and conversion of CO was identified, the tuning of which could be controlled by varying the synthetic parameters. The ALD of TiO2 films proved to be an effective way to maximize the Au-TiO2 interface sites, and with that help with the activation of molecular oxygen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ellipsometric studies of sputtered silicon nitride on n-GaAs

Ellipsometry, which is the study of optical systems through their effect on polarized light, is a nondestructive technique offering extremely high sensitivity and in situ operation. One of the intriguing possibilities is to make use of the high sensitivity of ellipsometry for studying the very thin interface between an insulating film and a semiconductor substrate. Researchers have been especially interested in native or anodic oxides. In a recent study, Aspnes and Theeten used ellipsometry to study the interface between silicon and its thermally grown oxide, SiO2. These authors were able to conclude that the interface consisted of a 7 +/- 2 A graded region of atomically mixed silicon and oxygen. In this paper we report both analysis and experimental results for the system: sputtered silicon nitride on (100) n-type gallium arsenide.

Peng, Y. K.↗

Alleviating polarity-conflict at the heterointerfaces of KTaO{sub 3}/GdScO{sub 3} polar complex-oxides

We have synthesized and investigated the heterointerfaces of KTaO{sub 3} (KTO) and GdScO{sub 3} (GSO), which are both polar complex-oxides along the pseudo-cubic [001] direction. Since their layers have the same, conflicting net charges at interfaces, i.e., KO(−1)/ScO{sub 2}(−1) or TaO{sub 2}(+1)/GdO(+1), forming the heterointerface of KTO/GSO should be forbidden due to strong Coulomb repulsion, the so-called polarity conflict. However, we have discovered that atomic reconstruction occurs at the heterointerfaces between KTO thin-films and GSO substrates, which effectively alleviates the polarity conflict without destroying the hetero-epitaxy. Our result demonstrates one of the important ways to create artificial heterostructures from polar complex-oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly-Cyclable Room-Temperature Phosphorene Polymer Electrolyte Composites for Li Metal Batteries

Despite significant interest toward solid-state electrolytes owing to their superior safety in comparison to liquid-based electrolytes, sluggish ion diffusion and high interfacial resistance limit their application in durable and high-power density batteries. Here, a novel quasi-solid Li + ion conductive nanocomposite polymer electrolyte containing black phosphorous (BP) nanosheets is reported. The developed electrolyte is successfully cycled against Li metal (over 550 h cycling) at 1 mA cm -2 at room temperature. The cycling overpotential is dropped by 75% in comparison to BP-free polymer composite electrolyte indicating lower interfacial resistance at the electrode/electrolyte interfaces. Molecular dynamics simulations reveal that the coordination number of Li + ions around (trifluoromethanesulfonyl)imide (TFSI - ) pairs and ethylene-oxide chains decreases at the Li metal/electrolyte interface, which facilitates the Li + transport through the polymer host. Here, density functional theory calculations confirm that the adsorption of the LiTFSI molecules at the BP surface leads to the weakening of N and Li atomic bonding and enhances the dissociation of Li + ions. This work offers a new potential mechanism to tune the bulk and interfacial ionic conductivity of solid-state electrolytes that may lead to a new generation of lithium polymer batteries with high ionic conduction kinetics and stable long-life cycling.

2D materials↗

Low Temperature Water–gas Shift: Differences in Oxidation States Observed with Partially Reduced Pt/MnOX and Pt/CeOX Catalysts Yield Differences in OH Group Reactivity

The Pt-ceria synergy may be described as the dehydrogenation of formate formed on the surface of the partially reducible oxide (PRO), ceria, by Pt across the interface, with H{sub 2}O participating in the transition state. However, due to the rising costs of rare earth oxides like ceria, replacement by a less expensive partially reducible oxide, like manganese oxide, is desirable. In this contribution, a comparison between Pt/ceria and Pt/manganese oxide catalysts possessing comparable Pt dispersions reveals that there are significant differences and certain similarities in the nature of the two Pt/PRO catalysts. With ceria, partial reduction involves reduction of the oxide surface shell, with Ce{sup 3+} at the surface and Ce{sup 4+} in the bulk. In the case of manganese oxide, partial reduction results in a mixture of Mn{sup 3+} and Mn{sup 2+}, with Mn{sup 2+} located at the surface. With Pt/CeO{sub X}, a high density of defect-associated bridging OH groups react with CO to yield a high density of the formate intermediate. With Pt/MnO{sub X}, the fraction of reactive OH groups is low and much lower formate band intensities result upon CO adsorption; moreover, there is a greater fraction of OH groups that are essentially unreactive. Thus, much lower CO conversion rates are observed with Pt/MnO{sub X} during low temperature water-gas shift. As with ceria, increasing the Pt loading facilitates partial reduction of MnO{sub X} to lower temperature, indicating metal-oxide interactions should be taken into account.

58 GEOSCIENCES↗

Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures

Nanoscale heterostructures composed of standing copper oxide nanowires decorated with Au nanoparticles and shells of titania and indium tin oxide were fabricated. The fabrication process involved surfactant-free and wet-chemical nucleation of gold nanoparticles on copper oxide nanowires followed by a line-of-sight sputtering of titania or indium tin oxide. The heterostructures were characterized using high resolution electron microscopy, diffraction, and energy dispersive spectroscopy. The interfaces, morphologies, crystallinity, phases, and chemical compositions were analyzed. The process of direct nucleation of gold nanoparticles on copper oxide nanoparticles resulted in low energy interface with aligned lattice for both the components. Coatings of polycrystalline titania or amorphous indium tin oxide were deposited on standing copper oxide nanowire–gold nanoparticle heterostructures. Self-shadowing effect due to standing nanowire heterostructures was observed for line-of-sight sputter deposition of titania or indium tin oxide coatings. Finally, the heterostructures were studied using Raman spectroscopy and ultraviolet–visible spectroscopy, including band gap energy analysis. Tailing in the band gap energy at longer wavelengths (or lower energies) was observed for the nanowire heterostructures. - Highlights: • Heterostructures comprised of CuO nanowires coated with Au nanoparticles. • Au nanoparticles exhibited nearly flat and low energy interface with nanowire. • Heterostructures were further sputter-coated with oxide shell of TiO{sub 2} or ITO. • The process resulted in coating of polycrystalline TiO{sub 2} and amorphous ITO shell.

36 MATERIALS SCIENCE↗

Interface trap density and mobility extraction in InGaAs buried quantum well metal-oxide-semiconductor field-effect-transistors by gated Hall method

In this work, we are using a gated Hall method for measurement of free carrier density and electron mobility in buried InGaAs quantum well metal-oxide-semiconductor field-effect-transistor channels. At room temperature, mobility over 8000 cm{sup 2}/Vs is observed at ∼1.4 × 10{sup 12} cm{sup −2}. Temperature dependence of the electron mobility gives the evidence that remote Coulomb scattering dominates at electron density <2 × 10{sup 11} cm{sup −2}. Spectrum of the interface/border traps is quantified from comparison of Hall data with capacitance-voltage measurements or electrostatic modeling. Above the threshold voltage, gate control is strongly limited by fast traps that cannot be distinguished from free channel carriers just by capacitance-based methods and can be the reason for significant overestimation of channel density and underestimation of carrier mobility from transistor measurements.

36 MATERIALS SCIENCE↗

Demonstrating 1 nm-oxide-equivalent-thickness HfO{sub 2}/InSb structure with unpinning Fermi level and low gate leakage current density

In this work, the band alignment, interface, and electrical characteristics of HfO{sub 2}/InSb metal-oxide-semiconductor structure have been investigated. By using x-ray photoelectron spectroscopy analysis, the conduction band offset of 1.78 ± 0.1 eV and valence band offset of 3.35 ± 0.1 eV have been extracted. The transmission electron microscopy analysis has shown that HfO{sub 2} layer would be a good diffusion barrier for InSb. As a result, 1 nm equivalent-oxide-thickness in the 4 nm HfO{sub 2}/InSb structure has been demonstrated with unpinning Fermi level and low leakage current of 10{sup −4} A/cm{sup −2}. The D{sub it} value of smaller than 10{sup 12} eV{sup −1}cm{sup −2} has been obtained using conduction method.

36 MATERIALS SCIENCE↗

Surface texture of single-crystal silicon oxidized under a thin V{sub 2}O{sub 5} layer

The process of surface texturing of single-crystal silicon oxidized under a V{sub 2}O{sub 5} layer is studied. Intense silicon oxidation at the Si–V{sub 2}O{sub 5} interface begins at a temperature of 903 K which is 200 K below than upon silicon thermal oxidation in an oxygen atmosphere. A silicon dioxide layer 30–50 nm thick with SiO{sub 2} inclusions in silicon depth up to 400 nm is formed at the V{sub 2}O{sub 5}–Si interface. The diffusion coefficient of atomic oxygen through the silicon-dioxide layer at 903 K is determined (D ≥ 2 × 10{sup –15} cm{sup 2} s{sup –1}). A model of low-temperature silicon oxidation, based on atomic oxygen diffusion from V{sub 2}O{sub 5} through the SiO{sub 2} layer to silicon, and SiO{sub x} precipitate formation in silicon is proposed. After removing the V{sub 2}O{sub 5} and silicon-dioxide layers, texture is formed on the silicon surface, which intensely scatters light in the wavelength range of 300–550 nm and is important in the texturing of the front and rear surfaces of solar cells.

36 MATERIALS SCIENCE↗

Contact resistance improvement using interfacial silver nanoparticles in amorphous indium-zinc-oxide thin film transistors

We describe an approach to reduce the contact resistance at compositional conducting/semiconducting indium-zinc-oxide (IZO) homojunctions used for contacts in thin film transistors (TFTs). By introducing silver nanoparticles (Ag NPs) at the homojunction interface between the conducting IZO electrodes and the amorphous IZO channel, we reduce the specific contact resistance, obtained by transmission line model measurements, down to ∼10{sup −2 }Ω cm{sup 2}, ∼3 orders of magnitude lower than either NP-free homojunction contacts or solid Ag metal contacts. The resulting back-gated TFTs with Ag NP contacts exhibit good field effect mobility of ∼27 cm{sup 2}/V s and an on/off ratio >10{sup 7}. We attribute the improved contact resistance to electric field concentration by the Ag NPs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale defects generated in the early/intermediate stages of dielectric breakdown in Si/SiO 2 transistors

In this study, electrically detected magnetic resonance and near-zero-field magnetoresistance measurements were used to study atomic-scale traps generated during high-field gate stressing in Si/SiO 2 MOSFETs. The defects observed are almost certainly important to time-dependent dielectric breakdown. The measurements were made with spin-dependent recombination current involving defects at and near the Si/SiO 2 boundary. The interface traps observed are P b0 and P b1 centers, which are silicon dangling bond defects. The ratio of P b0 /P b1 is dependent on the gate stressing polarity. Electrically detected magnetic resonance measurements also reveal generation of E' oxide defects near the Si/SiO 2 interface. Near-zero-field magnetoresistance measurements made throughout stressing reveal that the local hyperfine environment of the interface traps changes with stressing time; these changes are almost certainly due to the redistribution of hydrogen near the interface.

42 ENGINEERING↗

Using Atom-Probe Tomography to Understand Zn O : Al / Si O 2 / Si Schottky Diodes

In this work, we use electronic transport and atom-probe tomography to study ZnO:Al=SiO 2 =Si Schottky diodes on lightly doped n- and p-type Si. We vary the carrier concentration in the ZnO:Al films by 2 orders of magnitude, but the Schottky barrier height remains nearly constant. Atom-probe tomography shows that Al segregates to the interface, so that the ZnO:Al at the junction is likely to be metallic even when the bulk of the ZnO:Al film is semiconducting. We hypothesize that the observed Fermi-level pinning is connected to the insulator-metal transition in doped ZnO. In conclusion, this implies that tuning the band alignment at oxide/Si interfaces may be achieved by controlling the transition between localized and extended states in the oxide, thereby changing the orbital hybridization across the interface.

36 MATERIALS SCIENCE↗

A Reactive Element Approach to Improve Fracture Healing in Metallic Systems

Self-healing materials demonstrate the ability to close fractures and regain mechanical integrity after a catastrophic failure. However, self-healing in metals can be inhibited by the natural tendency for technologically-relevant metallic systems to oxidize on the crack surface. This study seeks to provide a thermodynamically-based mechanism to enhance healing capability at a solid/liquid interface through alloys designed with a reactive element alloying addition possessing a lower free energy of oxide formation than the parent element. In this study, model Sb-Cu and Sb-Zn systems enable comparisons between mechanistic behaviors based only on thermodynamic reactivity. Mechanical and microstructural investigation demonstrated that the more reactive alloying addition resulted in more effective bonding through increasing bond area and load-bearing capacity of the system. The improved bonding was attributed to improved wetting and reduction of the passivating surface oxide across an interface. The work has potential to advance self-healing capabilities in metallic systems through more appropriate alloy selection to enable improved healing.

36 MATERIALS SCIENCE↗

Tuning back contact property via artificial interface dipoles in Si/organic hybrid solar cells

Back contact property plays a key role in the charge collection efficiency of c-Si/poly(3,4-ethylthiophene):poly(styrenesulfonate) hybrid solar cells (Si-HSCs), as an alternative for the high-efficiency and low-cost photovoltaic devices. In this letter, we utilize the water soluble poly (ethylene oxide) (PEO) to modify the Al/Si interface to be an Ohmic contact via interface dipole tuning, decreasing the work function of the Al film. This Ohmic contact improves the electron collection efficiency of the rear electrode, increasing the short circuit current density (J{sub sc}). Furthermore, the interface dipoles make the band bending downward to increase the total barrier height of built-in electric field of the solar cell, enhancing the open circuit voltage (V{sub oc}). The PEO solar cell exhibits an excellent performance, 12.29% power conversion efficiency, a 25.28% increase from the reference solar cell without a PEO interlayer. The simple and water soluble method as a promising alternative is used to develop the interfacial contact quality of the rear electrode for the high photovoltaic performance of Si-HSCs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved high temperature integration of Al{sub 2}O{sub 3} on MoS{sub 2} by using a metal oxide buffer layer

We deposited a metal oxide buffer layer before atomic layer deposition (ALD) of Al{sub 2}O{sub 3} onto exfoliated molybdenum disulfide (MoS{sub 2}) in order to accomplish enhanced integration. We demonstrate that even at a high temperature, functionalization of MoS{sub 2} by means of a metal oxide buffer layer can effectively provide nucleation sites for ALD precursors, enabling much better surface coverage of Al{sub 2}O{sub 3}. It is shown that using a metal oxide buffer layer not only allows high temperature ALD process, resulting in highly improved quality of Al{sub 2}O{sub 3}/MoS{sub 2} interface, but also leaves MoS{sub 2} intact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal barrier coating life prediction model development

A life prediction model for correlating the spallation life of ceramic thermal barrier coatings is developed which includes both cyclic and time-dependent damage. The cyclic damage is related to the calculated cyclic inelastic strain range, while the time-dependent damage is related to the oxidation kinetics at the bond-ceramic interface. The cyclic inelastic strain range is calculated using a modified form of the Walker viscoplastic material model; calculation of the oxidation kinetics is based on traditional oxidation algorithms using experimentally determined parameters. The correlation between the actual and predicted spallation lives is within a factor of 3.

Cruse, T. A.↗

Strain-Rate-Free Diffusion Flames: Initiation, Properties, and Quenching

For about a half century, the stabilization of a steady planar deflagration on a heat-sink-type flat-flame burner has been of extraordinary service for the theoretical modeling and diagnostic probing of combusting gaseous mixtures. However, most engineering devices and most unwanted fire involve the burning of initially unmixed reactants. The most vigorous burning of initially separated gaseous fuel and oxidizer is the diffusion flame. In this useful idealization (limiting case), the reactants are converted to product at a mathematically thin interface, so no interpenetration of fuel and oxidizer occurs. This limit is of practical importance because it often characterizes the condition of optimal performance (and sometimes environmentally objectionable operation) of a combustor. A steady planar diffusion flame is most closely approached in the laboratory in the counterflow apparatus. The utility of this simple-strain-rate flow for the modeling and probing of diffusion flames was noted by Pandya and Weinberg 35 years ago, though only in the last decade or so has its use become internationally common place. However, typically, as the strain rate a is reduced below about 20 cm(exp -1), and the diffusion-flame limit (reaction rate much faster than the flow rate) is approached, the burning is observed to become unstable in earth gravity. The advantageous steady planar flow is not available in the diffusion-flame limit in earth gravity. This is unfortunate because the typical spatial scale in a counterflow is (k/a)(sup 1/2), where k denotes a characteristic diffusion coefficient; thus, the length scale becomes large, and the reacting flow is particularly amenable to diagnostic probing, as the diffusion-flame limit is approached. The disruption of planar symmetry is owing the fact that, as the strain rate a decreases, the residence time (l/a) of the throughput in the counterflow burner increases. Observationally, when the residence time exceeds about 50 msec, the inevitably present convective (Rayleigh-Benard) instabilities, associated with hot-under-cold (flame-under-fresh-reactant) stratification of fluid in a gravitational field, have time to grow to finite amplitude during transit of the burner.

Fendell, Francis↗

Engineering PdAu/CeO 2 Alloy/Oxide Interfaces for Selective Methane‐to‐Methanol Conversion with Water

The direct conversion of methane-to-methanol remains a critical challenge in methane valorization. In this study, we unveil the crucial role of PdAu/CeO 2 catalysts in enabling selective methane transformation under mild conditions, using only water as the sole oxidant. Through a combination of experimental techniques, including XPS and catalytic testing, alongside density functional theory (DFT) calculations, we demonstrate that a Pd 0.3 Au 0.7 /CeO 2 catalyst, which predominantly exposes isolated Pd atoms, achieves remarkable methanol selectivity (∼80%) at 500 K with a 1:1 methane-to-water ratio. While Pd/CeO 2 efficiently activates methane, its tendency for overreaction leads to complete methanol decomposition, thereby limiting selectivity. Alloying Pd with Au on ceria mitigates this over-reactivity, preventing methanol degradation while maintaining sufficient catalytic activity. The PdAu/CeO 2 composite exhibits a synergistic effect: Pd in contact with the ceria support facilitates methane activation and water dissociation, while Au fine-tunes reactivity to promote methanol formation. DFT calculations confirm that isolated Pd sites at the PdAu/CeO 2 interface play a key role in balancing activity and selectivity. This work underscores the importance of alloy/oxide interfaces in controlling selective methane conversion with water and offers valuable insights for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗