Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microstructure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Radiation response of a Fe–20Cr–25Ni austenitic stainless steel under Fe 2+ irradiation at 500 °C

The radiation response of a Fe–20Cr–25Ni austenitic stainless steel under self-ion irradiation at 500 °C was systematically investigated. The steel was irradiated at 500 °C by 3.5 MeV Fe 2+ ions to 10, 50, and 150 peak dpa, respectively. In the 200–400 nm depth region, radiation-induced Frank loops were relatively stable in both size and number density from 10 to 150 peak dpa. Anisotropic distribution of Frank loops was observed in the 50 and 150 peak dpa specimens, possibly due to interaction of Frank loops and network dislocations with preferred orientations. Coarse voids were found only in the 50 and 150 peak dpa specimens in depths less than 750 nm, suggesting that injected interstitials at deeper regions suppressed the void nucleation. The peak swelling was very low (~0.4%) for both 50 and 150 peak dpa irradiation. Radiation also led to the formation of intragranular plate-like Cr-rich carbides. Radiation-induced segregation of Ni and Si was found at various sinks: dislocation loops, void surfaces, and carbide-matrix interfaces. Finally, irradiation hardening was measured by nanoindentation and the results are consistent with microstructure-based calculations using the dispersed barrier hardening model. The major contributor to irradiation hardening changed from Frank loops at the lowest dose to network dislocations at the highest dose.

dislocation loops↗

4D nano-tomography of electrochemical energy devices using lab-based X-ray imaging

Electrochemical energy devices offer a variety of alternate means for low-carbon, multi-scale energy conversion and storage. Reactions in these devices are supported by electrodes with characteristically complex microstructures. To meet the increasing capacity and lifetime demands across a range of applications, it is essential to understand microstructural evolutions at a cell and electrode level which are thought to be critical aspects influencing material and device lifetime and performance. X-ray computed tomography (CT) has become a highly employed method for non-destructive characterisation of such microstructures with high spatial resolution. However, sub-micron resolutions present significant challenges for sample preparation and handling particularly in 4D studies, (three spatial dimensions plus time). Here, microstructural information is collected from the same region of interest within two electrode materials: a solid oxide fuel cell and the positive electrode from a lithium-ion battery. Using a lab-based X-ray instrument, tomograms with sub-micron resolutions were obtained between thermal cycling. The intricate microstructural evolutions captured within these two materials provide model examples of 4D X-ray nano-CT capabilities in tracking challenging degradation mechanisms. Furthermore, this technique is valuable in the advancement of electrochemical research as well as broader applications for materials characterisation.

25 ENERGY STORAGE↗

Utilizing a Dynamic Segmentation Convolutional Neural Network for Microstructure Analysis of Additively Manufactured Superalloy 718

Additive manufacturing (AM) is revolutionizing almost all industries through the production of intricate geometries previously prohibited by cost or machinability. Ni-based superalloys form a primary alloy class for high temperature applications in the petrochemical, aerospace, and nuclear industries because of their intrinsic resistance to creep and the ability to heat treat the superalloy for high strength. Despite these attractive properties, the extreme work hardening of Ni-based superalloys makes traditional manufacturing of complex shapes difficult and thus, these alloys are an attractive target for AM. Superalloy 718 was chosen as an example superalloy because of the wide variety of precipitates that can form within its composition space from the repetitive heating and cooling cycles of the AM process. The precipitates and other microstructure features, such as grain boundaries and dislocations, will dictate the mechanical properties and thus, there is an extensive challenge to characterize the size, number density, composition, and volume fraction of each microstructural feature from AM fabrication using analytical electron microscopy. This work focused on the application of a pixel-wise classification machine learning (ML) model called a dynamic segmentation convolutional neural network (DSCNN) to identify the microstructural features of an as-fabricated additively manufactured superalloy 718.

Taller, Stephen↗

Grain boundary facilitated dissolution of nanocrystalline NpO 2 (s) from legacy waste processing

Dissolution of actinide dioxides, including neptunium dioxide (NpO 2 (s)), is paramount for the prediction of the environmental fate of nuclear materials. Quantifying dissolution rates, as well as understanding qualitative dissolution mechanisms, informs performance assessment for geologic disposal of spent nuclear fuel and management of legacy radioactive waste. The aim of this research was to measure the dissolution rate of nanocrystalline NpO 2 (s), produced through legacy nuclear waste processing, under oxidizing conditions, as well as to characterize surface alteration to the material. The solid phase was characterized using electron microscopy techniques (SEM/STEM) and X-ray photoelectron spectroscopy (XPS), indicating preferential dissolution of Np-hydroxide contained in the grain boundaries of NpO 2 (s) and fragmentation of grains from the matrix. The oxidative dissolution was monitored over 40 weeks, yielding a two-step kinetic dissolution model involving hydration of NpO 2 (s) and subsequent oxidation and dissolution of the hydroxide phase. Here, the proposed dissolution models for nanocrystalline NpO 2 (s) suggest that microstructural features such as grain boundaries are key factors affecting dissolution, including release of colloidal particles, and ultimately, environmental fate and transport of nuclear materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Review on the growth, properties and applications of self-assembled oxide–metal vertically aligned nanocomposite thin films—current and future perspectives

Self-assembled oxide–metal nanocomposite thin films have aroused great research interest owing to their wide range of functionalities, including metamaterials with plasmonic and hyperbolic optical properties, and ferromagnetic, ferroelectric and multiferroic behaviors. Oxide–metal nanocomposites typically self-assemble as metal particles in an oxide matrix or as a vertically aligned nanocomposite (VAN) with metal nanopillars embedded in an oxide matrix. Among them, the VAN architecture is particularly interesting due to the vertical strain control and highly anisotropic structure, enabling the epitaxial growth of materials with large lattice mismatch. In this review, the driving forces behind the formation of self-assembled oxide–metal VAN structures are discussed. Specifically, an updated in-plane strain compensation model based on the areal strain compensation concept has been proposed in this review, inspired by the prior linear strain compensation model. It provides a guideline for material selection for designing VAN systems, especially those involving complex orientation matching relationships. Based on the model, several case studies are discussed, comparing the microstructure and morphology of different oxide–metal nanocomposites by varying the oxide phase. Specific examples highlighting the coupling between the electrical, magnetic and optical properties are also discussed in the context of oxide–metal nanocomposites. Finally, future research directions and needs are also discussed.

36 MATERIALS SCIENCE↗

Energy Frontier Research Center -- Center for Materials Science of Nuclear Fuels

The mission of the Center for Material Science of Nuclear Fuels (CMSNF) is to develop a first principles-based understanding of how complex defects affect thermal transport in irradiated nuclear fuel (specifically UO 2 ), and to develop an experimentally validated multiscale modeling capability for the predictive understanding of the microstructure dynamics and its impact on thermal transport in nuclear fuel.

36 MATERIALS SCIENCE↗

In-service Oxidation and IASCC in High Fluence Baffle-Former Bolts Retrieved from a Westinghouse PWR

Baffle-former bolts (BFBs) are subjected to significant mechanical stress and neutron irradiation from the reactor core during the plant operation. Over the long operation period, these conditions lead to potential degradation and reduced load-carrying capacity of the bolts, and life extension of existing pressurized water reactors (PWRs) would only cause more damage to the bolt material. To this end, the Light Water Reactor Sustainability (LWRS) Program Materials Research Pathway (MRP) successfully harvested two high fluence BFBs from a Westinghouse two-loop downflow type PWR in 2016. In the same year, the two BFBs were received at the Westinghouse Churchill facility for inspection and specimen fabrication. The fabrication was completed in 2017 with specimens shipped to Oak Ridge National Laboratory (ORNL) for further testing. The objective of this project is to provide information that is integral to evaluating end of life microstructure and properties as a benchmark of international models developed for predicting radiation-induced swelling, segregation, precipitation, mechanical property degradation, and with the latest findings, susceptibility to irradiation-assisted stress corrosion cracking (IASCC).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Novel additive manufacturing for plasma facing materials ‐ creating a research pathway for minority students

This project addresses two critical and intertwined challenges in fusion energy, namely the shortage of a broadly trained scientific workforce and the lack of scalable manufacturing solutions for plasma-facing components (PFCs). Through a collaboration among Florida International University (FIU), Miami Dade College (MDC), and Purdue University, the project established structured, reproducible educational and research pathways that recruit and advance students from institutions historically outside the fusion energy enterprise, building the human capital that this field urgently needs. The project integrates the complementary research strengths of FIU and Purdue to investigate flash sintering as a transformative processing route for tungsten-based PFCs. Unlike conventional sintering approaches, flash sintering offers rapid densification at significantly reduced thermal budgets, making it a compelling candidate for fabricating complex tungsten geometries that must withstand extreme plasma-facing environments. Systematic experimental and modeling efforts will elucidate the fundamental mechanisms governing microstructure evolution, grain boundary chemistry, and thermomechanical response during flash sintering — knowledge that is presently lacking but essential for translating this technology into reliable manufacturing practice. The convergence of workforce development and cutting-edge manufacturing research positions this project to deliver measurable, durable impact: a pipeline of fusion-ready researchers cultivated through expanded institutional partnerships, and a validated materials processing framework that accelerates domestic readiness for next-generation fusion reactor construction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

2D and 3D X-Ray Structural Microscopy Using Submicron-Resolution Laue Microdiffraction

We have developed a scanning, polychromatic x-ray microscopy technique with submicron spatial resolution at the Advanced Photon Source. In this technique, white undulator radiation is focused to submicron diameter using elliptical mirrors. Laue diffraction patterns scattered from the sample are collected with an area detector and then analyzed to obtain the local crystal structure, lattice orientation, and strain tensor. These new microdiffraction capabilities have enabled both 2D and 3D structural studies of materials on mesoscopic length-scales of tenths-to-hundreds of microns. For thin samples such as deposited films, 2D structural maps are obtained by step-scanning the area of interest. For example, 2D x-ray microscopy has been applied in studies of the epitaxial growth of oxide films. For bulk samples, a 3D differential-aperture x-ray microscopy technique has been developed that yields the full diffraction information from each submicron volume element. The capabilities of 3D x-ray microscopy are demonstrated here with measurements of grain orientations and grain boundary motion in polycrystalline aluminum during 3D thermal grain growth. X-ray microscopy provides the needed, direct link between the experimentally measured 3D microstructural evolution and the results of theory and modeling of materials processes on mesoscopic length scales.

36 MATERIALS SCIENCE↗

Gas Atomization Precursor Powder Approach for Simplified Large-Scale Production of Oxide Dispersion

Oxide dispersion strengthened (ODS) Ni-based alloys show promise for future energy applications that require high-temperature and oxidation resistant properties. Gas atomization reaction synthesis (GARS), with a mixed (Ar/O{sub 2}) atomization gas, is being developed as a simplified route for producing ODS precursor powders. Internal oxidation studies determined Ni-Cr-Y-(Hf or Ti) containing systems are suitable for production of ODS alloys via hot consolidation, which is used to encourage oxygen exchange between the less stable surface oxide phase and reactive alloying elements, resulting in highly stable nano-metric dispersoid formation. Size control of powders is key to optimizing microstructural and strengthening features. Aspiration and, previously, water modeling experiments were used to develop atomization process parameters that encourage controlled powder production while maintaining reduced operating costs when implemented on an industrial scale. For an increase in pour tube extension: aspiration base pressure at any given operating pressure was found to decrease while wake closure pressure was found to increase. Aspiration hysteresis was observed as recorded previously in the literature. Light emission was observed above wake closure pressures.

36 MATERIALS SCIENCE↗

Using simulation to study solid oxide cell degradation

Slides of the presentation given by Harry Abernathy from the National Energy Technology Laboratory at the 2023 International Conference and Expo on Advanced Ceramics and Composites. The presentation was an overview of NETL's solid oxide cell performance degradation modeling, including a demonstration of the impact of microstructural analysis methods on the resulting degradation simulations.

Abernathy, Harry↗

Understanding the reaction of nuclear graphite with molecular oxygen: Kinetics, transport, and structural evolution

A thorough understanding of oxidation is important when considering the health and integrity of graphite components in graphite reactors. For the next generation of graphite reactors, HTGRs specifically, an unlikely air ingress has been deemed significant enough to have made its way into the licensing applications of many international licensing bodies. While a substantial body of literature exists on nuclear graphite oxidation in the presence of molecular oxygen and significant efforts have been made to characterize oxidation kinetics of various grades, the value of existing information is somewhat limited. Often, multiple competing processes, including reaction kinetics, mass transfer, and microstructural evolution, are lumped together into a single rate expression that limits the ability to translate this information to different conditions. This article reviews the reaction of graphite with molecular oxygen in terms of the reaction kinetics, gas transport, and microstructural evolution of graphite. It also presents the foundations of a model for the graphite-molecular oxygen reaction system that is kinetically independent of graphite grade, and is capable of describing both the bulk and local oxidation rates under a wide range of conditions applicable to air-ingress.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Strain Rate Effects on the Mechanical Response of Polypropylene-Based Composites Deformed at Small Strains

The mechanical properties and response of two composites based polypropylene (PP) have been determined for small strains and for a range of strain rates in the quasi static domain. These two materials are the talc-filled and non-filled high impact PP. Uni-axial tensile tests were performed at different strain rates in order to characterize the mechanical response and the strain rate effect. Experimental results showed that both unfilled and talc-filled high impact polypropylene were sensitive to strain rate and have a non linear behavior even at relatively low strains. SEM analysis has been conducted to obtain a better comprehension of deformation mechanisms involved during loading by observations of the microstructure evolution. For each of these two materials, two existing modeling approaches are proposed. The first one is a three-parameter nonlinear constitutive model based on the experimental results. The second is a micromechanically-based approach for the elastic-viscoplastic behavior of the composite materials. The stress-strain curves predicted by these models are in fairly good agreement with our experimental results.

36 MATERIALS SCIENCE↗

Uncertainty Quantification for Dissimilar Material Joints Under Corrosion Environment

Abstract Self-Piercing Riveting (SPR) is one of the most commonly used methods for joining dissimilar materials in the automotive industry. These joints are popular due to their adaptability, high performance and short cycle time. However, since these joints involve two dissimilar materials, they are susceptible to galvanic corrosion in the presence of an electrolyte which is driven by the difference in the equilibrium potential of the metals. This can affect the safety and resilience of these joints. In this paper, we focus on galvanic corrosion in Al-Fe SPR joints. A Machine learning (ML) based surrogate model, which is based off of FE simulations, for statistical corrosion analysis is developed. This model enables the resilience and reliability analysis of SPR joints under corrosion environment. In this study, first a physics-based finite element (FE) corrosion model has been developed to simulate the galvanic corrosion between a Fe cathode and an Al anode of a SPR joint. This model takes into account the effect of the crystal microstructure of the Al anode and the precipitation of the corrosion product. Several geometric and environmental factors including crevice gap, roughness of anode, conductivity, pH and the temperature of the electrolyte that effect corrosion are investigated. A thorough Uncertainty Quantification (UQ) analysis is conducted for the overall corrosion behavior of the Fe-Al SPR joints using a novelistic Probabilistic Confidence-Based Adaptive Sampling (PCAS) technique. PCAS is used to train the surrogate model by identifying the critical sampling points and thus reducing the overall computational costs. It is found that the electrolyte temperature has the largest effects on the material loss and needs to be managed closely for better corrosion control. By understanding the corrosion performance and resultant uncertainty impact on SPR joints, the reliability and resilience of these joints can be improved.

36 MATERIALS SCIENCE↗

Revisiting solidification microstructure selection maps in the frame of additive manufacturing

Understanding microstructural development in additive manufacturing under highly non-equilibrium cooling conditions and the consequent effects on mechanical properties of the final component is critical for accelerating industrial adoption of these manufacturing techniques. In this study, simple but effective theoretical solidification models are recalled to evaluate their ability to predict of microstructural features in additive manufacturing applications. As a case study, the resulting solidification microstructure selection maps are created to predict the stable growth modality and the columnar to equiaxed transition (CET) of an Al-10Si-0.5Mg alloy processed via Selective Laser Melting. The potential of this method in microstructural predictions for additively manufactured products, as well as outstanding challenges and limitations, are discussed.

36 MATERIALS SCIENCE↗

Bayesian Learning of Adatom Interactions from Atomically Resolved Imaging Data

Atomic structures and adatom geometries of surfaces encode information about the thermodynamics and kinetics of the processes that lead to their formation, and which can be captured by a generative physical model. In this work, we develop a workflow based on a machine-learning-based analysis of scanning tunneling microscopy images to reconstruct the atomic and adatom positions, and a Bayesian optimization procedure to minimize statistical distance between the chosen physical models and experimental observations. We optimize the parameters of a 2- and 3-parameter Ising model describing surface ordering and use the derived generative model to make predictions across the parameter space. For concentration dependence, we compare the predicted morphologies at different adatom concentrations with the dissimilar regions on the sample surfaces that serendipitously had different adatom concentrations. The proposed workflow can be used to reconstruct the thermodynamic models and associated uncertainties from the experimental observations of materials microstructures. The code used in the manuscript is available at https://github.com/saimani5/Adatom_interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supercritical fluids behave as complex networks

Abstract Supercritical fluids play a key role in environmental, geological, and celestial processes, and are of great importance to many scientific and engineering applications. They exhibit strong variations in thermodynamic response functions, which has been hypothesized to stem from the microstructural behavior. However, a direct connection between thermodynamic conditions and the microstructural behavior, as described by molecular clusters, remains an outstanding issue. By utilizing a first-principles-based criterion and self-similarity analysis, we identify energetically localized molecular clusters whose size distribution and connectivity exhibit self-similarity in the extended supercritical phase space. We show that the structural response of these clusters follows a complex network behavior whose dynamics arises from the energetics of isotropic molecular interactions. Furthermore, we demonstrate that a hidden variable network model can accurately describe the structural and dynamical response of supercritical fluids. These results highlight the need for constitutive models and provide a basis to relate the fluid microstructure to thermodynamic response functions.

42 ENGINEERING↗