Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general linear methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Finding curvilinear features in speckled images

A method for finding curves in digital images with speckle noise is described. The solution method differs from standard linear convolutions followed by thresholds in that it explicitly allows curvature in the features. Maximum a posteriori (MAP) estimation is used, together with statistical models for the speckle noise and for the curve-generation process, to find the most probable estimate of the feature, given the image data. The estimation process is first described in general terms. Then, incorporation of the specific neighborhood system and a multiplicative noise model for speckle allows derivation of the solution, using dynamic programming, of the estimation problem. The detection of curvilinear features is considered separately. The detection results allow the determination of the minimal size of detectable feature. Finally, the estimation of linear features, followed by a detection step, is shown for computer-simulated images and for a SAR image of sea ice.

Samadani, Ramin↗

Effect of Strain Rate on Mechanical Properties of Wrought Sintered Tungsten at Temperatures above 2500 F

Specimens of wrought sintered commercially pure tungsten were made from 1/8-inch swaged rods. All the specimens were recrystallized at 4050 F for 1 hour prior to testing at temperatures from 2500 to 4000 F at various strain rates from 0.002 to 20 inches per inch per minute. Results showed that, at a constant temperature, increasing the strain rate increased the ultimate tensile strength significantly. The effects of both strain rate and temperature on the ultimate tensile strength of tungsten may be correlated by the linear parameter method of Manson and Haferd and may be used to predict the ultimate tensile strength at higher temperatures, 4500 and 5000 F. As previously reported, ductility, as measured by reduction of area in a tensile test, decreases with increasing temperature above about 3000 F. Increasing the strain rate at temperatures above 3000 F increases the ductility. Fractures are generally transgranular at the higher strain rates and intergranular at the lower strain rates.

Sikora, Paul F.↗

Designing Agent Collectives For Systems With Markovian Dynamics

The "Collective Intelligence" (COIN) framework concerns the design of collectives of agents so that as those agents strive to maximize their individual utility functions, their interaction causes a provided "world" utility function concerning the entire collective to be also maximized. Here we show how to extend that framework to scenarios having Markovian dynamics when no re-evolution of the system from counter-factual initial conditions (an often expensive calculation) is permitted. Our approach transforms the (time-extended) argument of each agent's utility function before evaluating that function. This transformation has benefits in scenarios not involving Markovian dynamics, in particular scenarios where not all of the arguments of an agent's utility function are observable. We investigate this transformation in simulations involving both linear and quadratic (nonlinear) dynamics. In addition, we find that a certain subset of these transformations, which result in utilities that have low "opacity (analogous to having high signal to noise) but are not "factored" (analogous to not being incentive compatible), reliably improve performance over that arising with factored utilities. We also present a Taylor Series method for the fully general nonlinear case.

Wolpert, David H.↗

Problem-free time-dependent variational principle for open quantum systems

Methods of quantum nuclear wave-function dynamics have become very efficient in simulating large isolated systems using the time-dependent variational principle (TDVP). However, a straightforward extension of the TDVP to the density matrix framework gives rise to methods that do not conserve the energy in the isolated system limit and the total system population for open systems where only energy exchange with environment is allowed. These problems arise when the system density is in a mixed state and is simulated using an incomplete basis. Thus, the basis set incompleteness, which is inevitable in practical calculations, creates artificial channels for energy and population dissipation. To overcome this unphysical behavior, we have introduced a constrained Lagrangian formulation of TDVP applied to a non-stochastic open system Schrödinger equation [L. Joubert-Doriol, I. G. Ryabinkin, and A. F. Izmaylov, J. Chem. Phys. 141, 234112 (2014)]. While our formulation can be applied to any variational ansatz for the system density matrix, derivation of working equations and numerical assessment is done within the variational multiconfiguration Gaussian approach for a two-dimensional linear vibronic coupling model system interacting with a harmonic bath.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linearized Pair-Density Functional Theory for Vertical Excitation Energies

Multiconfiguration pair-density functional theory (MC-PDFT) is a computationally efficient method that computes the energies of electronic states in a state specific or state average framework via an on-top functional. However, MC-PDFT does not include state interaction among these states since the final energies do not come from the diagonalization of an effective model-space Hamiltonian. Recently, multistate extensions such as linearized PDFT (L-PDFT) have been developed to accurately model the potentials near conical intersections and avoided crossings. However, there has not been any systematic study evaluating their performance for predicting vertical excitations at the equilibrium geometry of a molecule, when the excited states are generally well separated. In this paper, we report the performance of L-PDFT on the extensive QUESTDB data set of vertical excitations using a database of automatically selected active spaces. We show that L-PDFT performs well on all these excitations and successfully reproduces the performance of MC-PDFT. These results further demonstrate the potential of L-PDFT, as its scaling is constant with the number of states included in the state-average manifold, whereas MC-PDFT scales linearly in this regard.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long-time uncertainty propagation using generalized polynomial chaos and flow map composition

We present an efficient and accurate method for long-time uncertainty propagation in dynamical systems. Uncertain initial conditions and parameters are both addressed. The method approximates the intermediate short-time flow maps by spectral polynomial bases, as in the generalized polynomial chaos (gPC) method, and uses flow map composition to construct the long-time flow map. In contrast to the gPC method, this approach has spectral error convergence for both short and long integration times. The short-time flow map is characterized by small stretching and folding of the associated trajectories and hence can be well represented by a relatively low-degree basis. The composition of these low-degree polynomial bases then accurately describes the uncertainty behavior for long integration times. The key to the method is that the degree of the resulting polynomial approximation increases exponentially in the number of time intervals, while the number of polynomial coefficients either remains constant (for an autonomous system) or increases linearly in the number of time intervals (for a non-autonomous system). The findings are illustrated on several numerical examples including a nonlinear ordinary differential equation (ODE) with an uncertain initial condition, a linear ODE with an uncertain model parameter, and a two-dimensional, non-autonomous double gyre flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A method of alternating characteristics with application to advection-dominated environmental systems

We present a numerical method for solving a class of systems of partial differential equations (PDEs) that arises in modeling environmental processes undergoing advection and biogeochemical reactions. The salient feature of these PDEs is that all partial derivatives appear in linear expressions. As a result, the system can be viewed as a set of ordinary differential equations (ODEs), albeit each one along a different characteristic. The method then consists of alternating between equations and integrating each one step-wise along its own characteristic, thus creating a customized grid on which solutions are computed. Since the solutions of such PDEs are generally smoother along their characteristics, the method offers the potential of using larger time steps while maintaining accuracy and reducing numerical dispersion. The advantages in efficiency and accuracy of the proposed method are demonstrated in two illustrative examples that simulate depth-resolved reactive transport and soil carbon cycling.

54 ENVIRONMENTAL SCIENCES↗

Development of Late Toxicity and International Prostate Symptom Score Resolution After External-Beam Radiotherapy Combined With Pulsed Dose Rate Brachytherapy for Prostate Cancer

Purpose: To investigate the development of gastrointestinal (GI) toxicity, genitourinary (GU) toxicity, erectile dysfunction, and International Prostate Symptom Score (IPSS) resolution in a cohort of patients treated with external-beam radiotherapy (EBRT) followed by a brachytherapy pulsed dose rate (PDR) boost. Methods and Materials: Between 2002 and 2008, 110 patients were treated with 46-Gy EBRT followed by PDR brachytherapy (24.96-28.80 Gy). The investigated outcome variables, GI toxicity, GU toxicity, erectile dysfunction, and IPSS were prospectively scored at several time points during follow-up. Association between time (as continuous and categorical variable) and the outcome variables was assessed using generalized linear models. Results: No statistically significant association was found between time (continuous) and GI toxicity (odds ratio [OR], 0.97; 95% confidence interval [CI], 0.89-1.06), GU toxicity (OR, 0.97; 95% CI, 0.91-1.03), erectile dysfunction (OR, 1.06; 95% CI, 0.99-1.11), and IPSS (-0.11; 95% CI, -0.41-0.20). Also, no statistically significant association was found between these variables and time as a categorical variable. GU toxicity was associated with IPSS resolution (OR, 1.16; 95% CI, 1.09-1.24). Posttreatment IPSS was associated with pretreatment IPSS (0.52; 95% CI, 0.25-0.79). Conclusions: No accumulation of high-grade toxicity over time could be established for a group of patients treated with EBRT and PDR brachytherapy for prostate cancer, probably because high-grade late toxicity resolves with time. Also, differences in IPSS values among patients are smaller after treatment than before treatment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Thin film deposition of diamond using normal paraffins as source of diamond nucleation centers

Highlights: ► Paraffin compounds are diamond nucleation sources. ► Thermoconductivity of Cu–DTF device is higher than such conductivity of Cu. ► DTF growth in HFCVD reactor is not linear function of time. -- Abstract: We propose a process for diamond thin film (DTF) deposition using normal paraffins (nP) as source of diamond nucleation centers. We deposited micro-crystalline diamond thin films (MCDTF) on a Cu substrate using Hot Filament CVD (HFCVD) and Passive Pt/Pd Surface Catalysis (PPt/PdSC) methods. Beeswax and a 1:1 mixture of normal paraffins of the general formula CH{sub 3}(CH{sub 2}){sub n}CH{sub 3} with n = 22 and 26 were tested as nP starting material. The films obtained were characterized by scanning electronic microscopy (SEM), Raman scattering temperature dependent spectroscopy and X-ray diffraction (XRD) methods, all of which confirmed that the deposited material is MCDTF.

36 MATERIALS SCIENCE↗

Dosimetry of Microdistributed Dose-Enhancing Agents in X-ray Synchrotron Binary Therapy

Monte Carlo based modelling of the dose distribution in the vicinity of concentrates of iodine (I) and gold (Au) binary radiotherapy agents has been performed for monochromatised synchrotron X-rays. While the KERMA approximation, which ignores electron transport, is often acceptable for kilovoltage X-ray dosimetry in X-ray binary therapy, the range of photoelectrons and Auger electrons may be significant when compared to the microdostributed structure of the binary compound in which case corrections to the approximation may be necessary. Dose is calculated using EGSnrc for microdistributions associated with X-ray radiation synovecotomy, where iodine is taken up in the synovial lining. Dose as a function of the volume of aggregation for an Au-based contrast agent such as Au nanoparticles, ranging in diameter from 5 micron to 100 micron, were calculated using EGSnrc and Penelope, showing that the dose varies slowly for 90 keV X-rays, where much of the dose delivered by short range photoelectrons while 80 keV X-rays, just below the K-edge of Au (80.729 keV) increases linearly with diameter. In general the dose varies slowly as a function of volume suggesting that only small corrections will be needed to account for effects due to the failure of electronic equilibrium.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multicomponent Transport in Polyatomic Reactive Gas Mixtures

We investigate multicomponent reactive flow models derived from the kinetic theory of gases. We discuss in particular the conservation equations, the transport fluxes and the transport coefficients in weak and strong magnetic fields. The mathematical properties of the resulting hyperbolic-parabolic systems of partial differential equations modeling multicomponent flows are deduced from the underlying kinetic framework. The structure and solution of the transport linear systems associated with the evaluation of transport coefficients are also addressed. In particular, the convergence of iterative techniques is deduced from the properties of the linearized Boltzmann collision operator. The impact of multicomponent transport is also discussed, notably the importance of Soret effects in various flows and the impact of volume viscosity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measuring Joule heating and strain induced by electrical current with Moire interferometry

This study proposes a new method to locate and measure the temperature of the hot spots caused by Joule Heating by measuring the free thermal expansion in-plane strain. It is demonstrated that the hotspot caused by the Joule heating in a thin metal film/plate structure can be measured by Phase shifting Moire interferometry with continuous wavelet transform (PSMI/CWT) at the microscopic scale. A demonstration on a copper film is conducted to verify the theory under different current densities. A correlation between the current density and strain in two orthogonal directions (one in the direction of the current flow) is proposed. The method can also be used for the measurement of the Joule heating in the microscopic solid structures in the electronic packaging devices. It is shown that a linear relationship exists between current density squared and normal strains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Features of temperature control of fuel element cladding for pressurized water nuclear reactor “WWER-1000” while simulating reactor accidents

During the experiments simulating NPR (nuclear power reactor) accidents with a coolant loss fuel elements behavior in a steam-hydrogen medium was studied at the temperature changed with the rate from 1 to 100K/s within the range of 300÷1500 °C. Indications of the thermocouples fixed on the cladding notably differ from real values of the cladding temperatures in the area of measuring junction due to thermal resistance influence of the transition zones “cladding-junction” and “junction-coolant”. The estimating method of a measurement error was considered which can provide adequate accounting of the influence factors. The method is based on thermal probing of a thermocouple by electric current flashing through thermoelements under the coolant presence or absence, a response time registration and processing, calculation of thermal inertia value for a thermocouple junction. A formula was derived for calculation of methodical error under stationary mode and within the stage of linear increase in temperature, which will determine the conditions for the cladding depressurization. Some variants of the formula application were considered, and the values of methodical errors were established which reached ∼5% of maximum value by the final moment of the stage of linear increase in the temperature.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Phonon anomalies and superconductivity in the Heusler compound YPd₂Sn

We have studied the structural and electronic properties of YPd₂Sn in the Heusler structure using a generalized gradient approximation of the density functional theory and the ab initio pseudopotential method. The electronic results indicate that the density of states at the Fermi level is primarily derived from Pd d states, which hybridize with Y d and Sn p states. Using our structural and electronic results, phonons and electron-phonon interactions have been studied by employing a linear response approach based on the density functional theory. Phonon anomalies have been observed for transverse acoustic branches along the [110] direction. This anomalous dispersion is merely a consequence of the strong coupling. By integrating the Eliashberg spectral function, the average electron-phonon coupling parameter is found to be λ=0.99. Using this value, the superconducting critical temperature is calculated to be 4.12 K, in good accordance with the recent experimental value of 4.7 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exact stochastic unraveling of an optical coherence dynamics by cumulant expansion

A numerically exact Monte Carlo scheme for calculation of open quantum system dynamics is proposed and implemented. The method consists of a Monte Carlo summation of a perturbation expansion in terms of trajectories in Liouville phase-space with respect to the coupling between the excited states of the molecule. The trajectories are weighted by a complex decoherence factor based on the second-order cumulant expansion of the environmental evolution. The method can be used with an arbitrary environment characterized by a general correlation function and arbitrary coupling strength. It is formally exact for harmonic environments, and it can be used with arbitrary temperature. Time evolution of an optically excited Frenkel exciton dimer representing a molecular exciton interacting with a charge transfer state is calculated by the proposed method. We calculate the evolution of the optical coherence elements of the density matrix and linear absorption spectrum, and compare them with the predictions of standard simulation methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of the attempts of quantum discord and quantum entanglement to capture quantum correlations

Measurements of quantum systems disturb their states. To quantify this nonclassical characteristic, Zurek and Ollivier [Phys. Rev. Lett. 88, 017901 (2001)] introduced the quantum discord, a quantum correlation that can be nonzero even when entanglement in the system is zero. Discord has aroused great interest as a resource that is more robust against the effects of decoherence and offers the exponential speed-up of certain computational algorithms. Here, we study general two-level bipartite systems and give general results on the relationship between discord, entanglement, and linear entropy. We also identify the states for which discord takes a maximal value for a given entropy or entanglement, thus placing strong bounds on entanglement-discord and entropy-discord relations. We find out that although discord and entanglement are identical for pure states, they differ when generalized to mixed states as a result of the difference in the method of generalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stability and decay of Bloch oscillations in the presence of time-dependent nonlinearity

We consider Bloch oscillations of Bose-Einstein condensates in the presence of a time-modulated s-wave scattering length. Generically, the interaction leads to dephasing and decay of the wave packet. Based on a cyclic-time argument, we find--in addition to the linear Bloch oscillation and a rigid soliton solution--an infinite family of modulations that lead to a periodic time evolution of the wave packet. In order to quantitatively describe the dynamics of Bloch oscillations in the presence of time-modulated interactions, we employ two complementary methods: collective coordinates and the linear stability analysis of an extended wave packet. We provide instructive examples and address the question of robustness against external perturbations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimal Experimental Design for Inverse Problems in the Presence of Observation Correlations

Optimal experimental design (OED) is the general formalism of sensor placement and decisions on the data collection strategy for engineered or natural experiments. This problem is prevalent in many critical fields such as battery design, numerical weather prediction, geosciences, environmental and urban studies. State-of-the-art computational methods for experimental design do not accommodate correlation structure in observational errors produced by many expensive-to-operate devices such as X-ray machines, radars, and satellites. Discarding evident data correlations leads to biased results, higher expenses, and waste of valuable resources. We present a general formulation of the OED formalism for model-constrained large-scale Bayesian linear inverse problems, where measurement errors are generally correlated. The proposed approach utilizes the Hadamard product of matrices to formulate the weighted-likelihood, and is valid for both finite as well as infinite-dimensional Bayesian inverse problems. Extensive numerical experiments are carried out for empirical verification of the proposed approach using an advection-diffusion model, where the objective is to optimally place a small set of sensors, under a limited budget, to predict the concentration of a contaminant in a closed and bounded domain.

Correlated observations↗