Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “focal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Differential roles of HIC-5 isoforms in the regulation of cell death and myotube formation during myogenesis

Hic-5 is a LIM-Only member of the paxillin superfamily of focal adhesion proteins. It has been shown to regulate a range of biological processes including: senescence, tumorigenesis, steroid hormone action, integrin signaling, differentiation, and apoptosis. To better understand the roles of Hic-5 during development, we initiated a detailed analysis of Hic-5 expression and function in C{sub 2}C{sub 12} myoblasts, a well-established model for myogenesis. We have found that: (1) myoblasts express at least 6 distinct Hic-5 isoforms; (2) the two predominant isoforms, Hic-5{alpha} and Hic-5{beta}, are differentially expressed during myogenesis; (3) any experimentally induced change in Hic-5 expression results in a substantial increase in apoptosis during differentiation; (4) ectopic expression of Hic-5{alpha} is permissive to differentiation while expression of either Hic-5{beta} or antisense Hic-5 blocks myoblast fusion but not chemodifferentiation; (5) Hic-5 localizes to focal adhesions in C{sub 2}C{sub 12} myoblasts and perturbation of Hic-5 leads to defects in cell spreading; (6) alterations in Hic-5 expression interfere with the normal dynamics of laminin expression; and (7) ectopic laminin, but not fibronectin, can rescue the Hic-5-induced blockade of myoblast survival and differentiation. Our data demonstrate differential roles for individual Hic-5 isoforms during myogenesis and support the hypothesis that Hic-5 mediates these effects via integrin signaling.

60 APPLIED LIFE SCIENCES↗

Refinement and Modeling of a Blackbody-Based Calibration Method in the InfraBREAD Detector

The Broadband Reflector Experiment for Axion Detection (BREAD) is an ongoing collaboration searching for the conversion of yet undiscovered axion-like dark matter particles to photons in the presence of a magnetic field. InfraBREAD, an experiment of BREAD, uses a superconducting nanowire single photon detector (SNSPD), a high-efficiency and low-noise device, to specifically detect infrared-range photons produced by $\mathcal{O}$(eV) axion-like particles. The unique BREAD reflector setup allows for the focusing of converted signal photons to a 1mm $\times$ 1mm SNSPD. However, when the detector is cooled to cryogenic temperatures during operation, uneven thermal contraction of reflector components may lead to a small shift in the location of the focal spot. A novel calibration method using blackbody radiation is proposed to locate the true focal spot of the detector \textit{in situ}. Through ray tracing simulations done in FRED Optical Engineering Software, this method is demonstrated to locate the focus to within $\SI{50}{\micro\metre}$ in the $z$ dimension.

Rao, Shardul↗

Modeling and Proof-of-Concept of a Blackbody-Based Calibration Method in the InfraBREAD Detector

The Broadband Reflector Experiment for Axion Detection (BREAD) is an ongoing collaboration searching for the conversion of yet undiscovered axion-like dark matter particles to photons in the presence of a magnetic field. InfraBREAD, a pilot experiment realization of BREAD, uses a superconducting nanowire single photon detector (SNSPD), a high-efficiency and low-noise device, to specifically detect infrared-range photons produced by $\mathcal{O}$(eV) axion-like particles. The unique BREAD coaxial reflector setup allows for the focusing of converted signal photons to a 1mm $\times$ 1mm SNSPD. However, when the detector is cooled to cryogenic temperatures during operation, uneven thermal contraction of reflector components may lead to a small shift in the location of the focal spot. A novel calibration method using blackbody radiation is proposed to locate the true focal spot of the detector \textit{in situ}. Through ray tracing simulations done in FRED Optical Engineering Software, this method is demonstrated to locate the focus to within $\SI{50}{\micro\metre}$ in the axial dimension. Additionally, it is demonstrated that the blackbody photon source used in this calibration must be at a temperature of at least $\SI{15}{\kelvin}$ to $\SI{40}{\kelvin}$, depending on the sensitivity of the SNSPD.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

System and method for parallel two-photon lithography using a metalens array

A metalens array is disclosed for controllably modifying a phase of a wavefront of an optical beam. The metalens array may have a substrate having at least first and second metalens unit cells, and forming a single integrated structure with no stitching being required of the first and second metalens unit cells. The first metalens unit cell has a first plurality of nanoscale features and is configured to modify a phase of a first portion of a wavefront of an optical signal incident thereon in accordance with a first predetermined phase pattern to create at least one first focal voxel within an image plane. The second metalens unit cell has a second plurality of nanoscale features configured to modify the phase of a second portion of the wavefront of the optical signal incident thereon, in accordance with a second predetermined phase pattern, to simultaneously create at least one second focal voxel within the image plane. Each metalens unit cell also has an overall diameter of no more than about 200 microns.

Xia, Xiaoxing↗

Design and Performance of the SPT-SLIM Receiver Cryostat

The South Pole Telescope Shirokoff Line Intensity Mapper (SPT-SLIM) is a millimeter-wavelength line-intensity mapping experiment, which was deployed on the South Pole Telescope (SPT) during the 2024-2025 Austral summer season. This pathfinder experiment serves to demonstrate the on-sky operation of multi-pixel on-chip spectrometer technology. We report on the cryogenic performance of the SPT-SLIM receiver for the first year of commissioning observations. The SPT-SLIM receiver utilizes an Adiabatic Demagnetization Refrigerator (ADR) for cooling the focal plane of superconducting filterbank spectrometers to a temperature of 150 mK. We demonstrate stable thermal performance of the focal plane module during observations consistent with thermal modeling, enabling a cryogenic operating efficiency above 80%. We also report on the receiver control system design utilizing the Observatory Control System (OCS) platform for automated cryogenic operation on the SPT.

Young, M. R. [Fermilab; Chicago U., KICP]↗

Target isolation system, high power laser and laser peening method and system using same

A system for applying a laser beam to work pieces, includes a laser system producing a high power output beam. Target delivery optics are arranged to deliver the output beam to a target work piece. A relay telescope having a telescope focal point is placed in the beam path between the laser system and the target delivery optics. The relay telescope relays an image between an image location near the output of the laser system and an image location near the target delivery optics. A baffle is placed at the telescope focal point between the target delivery optics and the laser system to block reflections from the target in the target delivery optics from returning to the laser system and causing damage.

Dane, C Brent↗

Progress Towards Plasma Pulse Compression of High Energy, Long Pulse Laser Beams

Compression of laser pulses to < {approx} 1-10 ps duration using stimulated Raman scattering (SRS) in a plasma promises to provide unprecedented power and intensity for a variety of applications, by avoiding the limits to fluence and intensity that are needed to avoid damage to the solid state optics that are used in conventional approaches. In particular, the ability to compress pump beam pulses of {approx} ns duration will allow present facilities with 10's kJ to over a MJ of energy to produce ultra short pulses efficiently, advancing applications in; fusion by fast ignition, x-ray production of high energy density experiments, as well as laser driven particle accelerators. We will discuss a series of experiments to demonstrate the needed beam amplification rate, and focal spot quality in a < 3mm plasma with the properties needed for compression of these pulses (n{sub e} {approx} 10{sup 19}/cm{sup 3}, T{sub e} 200 to 300 eV) when the plasma is extended. The experiments use He plasmas produced with a 300 J, 1 ns, beam at the Jupiter Laser facility to amplify a counter-propagating, ultra-short pulse (USP) seed by a factor of 10x to 37x and study the dependence of the amplification, the associated non-linear wave response, and the resulting beam quality and energy, on the intensity of both seed and pump beam. In particular, a regime in which amplification of USP beams is achieved while maintaining a low angular divergence of the beam consistent with good focal spot quality will be discussed.

42 ENGINEERING↗

Using a Microcapillary Refractive X-Ray Lens for Focusing And Imaging

The microcapillary lens, formed by air bubbles in a hollow core glass capillary filled with epoxy, is a novel design of a compound refractive lens for X-rays. The epoxy enclosed between two air bubbles has the form of a biconcave lens and acts as a positive lens for X-rays. Each individual lens is spherical with radius of curvature equal to the inner radius of the capillary. Up to 500 individual biconcave lenses can be formed in a single capillary with diameters from 50 to 500 {mu}m. Due to the small radius of curvatures that can be achieved, microcapillary lenses typically have shorter focal lengths than those made by compression or injection molding. For example, microcapillary lenses with a focal length about 5 cm for 8 keV X-rays and 50-micron aperture are readily available. We have produced a set of lenses in a 200-micron inner-diameter glass capillary with 100--350 individual microlenses and measured their parameters at the Stanford Synchrotron Radiation Laboratory and at the Advanced Photon Source. Our investigations have also shown that the lenses are suitable for imaging applications with an X-ray tube as a source of X-rays. A simple X-ray microscope is discussed. The microscope consists of a copper anode X-ray tube, X-ray lens and CCD-camera. The object, lens and CCD-camera were placed in-line at distances to satisfy the lens formula. It is shown that the field of view of the microscope is about 1 mm and resolution is equal to 3--5 {mu}m.

43 PARTICLE ACCELERATORS↗

Simulations and experiments of intense ion beam compression in space and time.

The Heavy Ion Fusion Science Virtual National Laboratory has achieved 60-fold longitudinal pulse compression of ion beams on the Neutralized Drift Compression Experiment (NDCX) [P. K. Roy et al., Phys. Rev. Lett. 95, 234801 (2005)]. To focus a space-charge-dominated charge bunch to sufficiently high intensities for ion-beam-heated warm dense matter and inertial fusion energy studies, simultaneous transverse and longitudinal compression to a coincident focal plane is required. Optimizing the compression under the appropriate constraints can deliver higher intensity per unit length of accelerator to the target, thereby facilitating the creation of more compact and cost-effective ion beam drivers. The experiments utilized a drift region filled with high-density plasma in order to neutralize the space charge and current of an {approx}300 keV K{sup +} beam and have separately achieved transverse and longitudinal focusing to a radius <2 mm and pulse duration <5 ns, respectively. Simulation predictions and recent experiments demonstrate that a strong solenoid (B{sub Z} < 100 kG) placed near the end of the drift region can transversely focus the beam to the longitudinal focal plane. This paper reports on simulation predictions and experimental progress toward realizing simultaneous transverse and longitudinal charge bunch focusing. The proposed NDCX-II facility would capitalize on the insights gained from NDCX simulations and measurements in order to provide a higher-energy (>2 MeV) ion beam user-facility for warm dense matter and inertial fusion energy-relevant target physics experiments.

43 PARTICLE ACCELERATORS↗

Evaporated Se x Te 1-x Thin Films with Tunable Bandgaps for Short-Wave Infrared Photodetectors

Semiconducting absorbers in high-performance short-wave infrared (SWIR) photodetectors and imaging sensor arrays are dominated by single-crystalline germanium and III-V semiconductors. However, these materials require complex growth and device fabrication procedures. In this work, thermally evaporated Se x Te 1- x alloy thin films with tunable bandgaps for the fabrication of high-performance SWIR photodetectors are reported. From absorption measurements, it is shown that the bandgaps of Se x Te 1- x films can be tuned continuously from 0.31 eV (Te) to 1.87 eV (Se). Owing to their tunable bandgaps, the peak responsivity position and photoresponse edge of Se x Te 1- x film-based photoconductors can be tuned in the SWIR regime. By using an optical cavity substrate consisting of Au/Al 2 O 3 to enhance its absorption near the bandgap edge, the Se 0.32 Te 0.68 film (an optical bandgap of ≈0.8 eV)-based photoconductor exhibits a cut-off wavelength at ≈1.7 μm and gives a responsivity of 1.5 AW -1 and implied detectivity of 6.5 × 10 10 cm Hz 1/2 W -1 at 1.55 μm at room temperature. Importantly, the nature of the thermal evaporation process enables the fabrication of Se 0.32 Te 0.68 -based 42 × 42 focal plane arrays with good pixel uniformity, demonstrating the potential of this unique material system used for infrared imaging sensor systems.

36 MATERIALS SCIENCE↗

Fundamental Vibrational Analyses of the HCN Monomer, Dimer and Associated Isotopologues

In this work we provide high level ab initio treatments of the structures, vibrational frequencies, and electronic energies of the HCN monomer and dimer systems along with several isotopologues. Additionally, the plethora of information related to this system within the literature is summarized and serves as a basis for comparison with the results of this paper. The geometry of the dimer and monomer are reported at the all electroncoupled-cluster singles, doubles, and perturbative triples level of theory [AE-CCSD(T)] with the correlation consistent quadruple-zeta quality basis sets with extra core functions (cc-pCVQZ) from Dunning. The theoretical geometries and electronic structures are further analyzed through the use of the Natural Bond Orbital (NBO) method and Natural Resonance Theory (NRT). At the AE-CCSD(T)/cc-pCVQZ level of theory, the full cubic with semi-diagonal quartic force field for nine dimer and four monomer isotopologues (the parent isotopologue along with 15N, 13C, and D derivatives) were obtained to treat the anharmonicity of the vibrations via second order vibrational perturbation theory (VPT2). Lastly, the enthalpy change associated with the formation of the dimer from two monomer units was determined using the focal point analysis. Computations including coupled-cluster through perturbative quadruples as well as basis sets up to six-zeta quality, including core functions (cc-pCVXZ, X=D,T,Q,5,6) were used to extrapolate to the AE-CCSDT(Q)/CBS energy associated with this hydrogen-bond forming process. After appending anharmonic zero-point vibrational, relativistic, and diagonal Born-Oppenheimer corrections, we report a value of -3.93 kcal mol -1 for the enthalpy of formation. To our knowledge, each set of results (geometries, vibrational frequencies, and energetics) reported in this study represents the highest-level and most reliable theoretical predictions reported for this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel occupancy detection solution using low-power IR-FPA based wireless occupancy sensor

Significant energy savings can be achieved by operating heating, ventilation, and air conditioning control systems with indoor occupancy measurement information. This paper presents a novel plug-and-play occupancy sensing method which will enable temporal minimization of building energy consumption to meet building usage behavior without privacy concerns. The proposed wireless occupancy sensing platform is based on long-wave infra-red (LWIR) focal-plane arrays (FPAs), or thermal imagers, that detect thermal energy rather than visible light. We developed an advanced sensor package consisting of multiple thermal imagers with low-cost optical enhancements to increase field of view and increase sensitivity to occupant detection (filtering building clutter). These imagers can be coupled with radio frequency and ultrasonic-based radar to enhance data collection at key occupant zone boundaries to improve accuracy. Standard filtering and estimation techniques from the image processing and computer vision communities are introduced to overcome the accuracy issues suffered by traditional PIR based sensing, especially when occupants remain relatively still. Accurate low-level counting of individuals can be achieved with minimal impact on privacy. As a result, the proposed occupancy detection method can work as a retrofit to enable real-time understanding of the building operational state and usage behavior. Sensor data obtained from real test building zones was used to test the efficacy of the method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Probing gluon saturation with forward di-hadron correlations in proton-nucleus collisions

We present a detailed numerical investigation of semi-inclusive forward di-hadron production in proton–nucleus collisions employing the Color Glass Condensate effective theory. We focus on the regime where di-hadrons are produced nearly back-to-back in the transverse plane, thereby justifying a transverse-momentum-dependent factorization approach in terms of small-x gluon distributions. Our computation integrates several key elements: i) non-linear rapidity evolution via the Balitsky–Kovchegov equation with running coupling, ii) both perturbative and non-perturbative Sudakov resummation, and iii) a phenomenologically constrained model for the initial conditions for small-x gluon distributions. We compare this phenomenological framework to experimental data from the STAR Collaboration on azimuthal correlations in forward di-pion production in both proton–proton and proton–gold collisions. We analyze the systematic theoretical uncertainties associated with the saturation scales of nuclei at the initial scale for rapidity evolution and with those associated with the hadronization process. Finally, we make predictions for the kinematics anticipated to be covered by the ALICE Forward Calorimeter (FoCal) upgrade at the Large Hadron Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CdSe Nanoplatelet Films with Controlled Orientation of their Transition Dipole Moment

With liquid–liquid interfacial assembly, we control the deposition of CdSe nanoplatelets into face-down or edge-up configurations. Controlled assembly, combined with back focal plane imaging, enabled unambiguous determination of the transition dipole orientation. The transition dipole moment of the emissive band-edge exciton in CdSe nanoplatelets was found to be isotropically oriented within the plane of the nanoplatelet with no measurable out-of-plane component and no preference for the long- or short-axis of the nanoplatelet. Importantly, CdSe nanoplatelet films in the face-down configuration exhibited unity dipole orientation within the plane of the film, which could improve the external efficiency of nanoplatelet LEDs, lasers, photodetectors, and photovoltaic cells beyond that which is possible with isotropic emitters. We also show that the two self-assembled configurations have different Förster energy transfer rates, as an effect of different dipole orientation and internanoplatelet distance.

2D materials↗

Manipulating the Transition Dipole Moment of CsPbBr 3 Perovskite Nanocrystals for Superior Optical Properties

Colloidal cesium lead halide perovskite nanocrystals exhibit unique photophysical properties including high quantum yields, tunable emission colors, and narrow photoluminescence spectra that have marked them as promising light emitters for applications in diverse photonic devices. Randomly oriented transition dipole moments have limited the light outcoupling efficiency of all isotropic light sources, including perovskites. In this report we design and synthesize deep blue emitting, quantum confined, perovskite nanoplates and analyze their optical properties by combining angular emission measurements with back focal plane imaging and correlating the results with physical characterization. By reducing the dimensions of the nanocrystals and depositing them face down onto a substrate by spin coating, we orient the average transition dipole moment of films into the plane of the substrate and improve the emission properties for light emitting applications. We then exploit the sensitivity of the perovskite electronic transitions to the dielectric environment at the interface between the crystal and their surroundings to reduce the angle between the average transition dipole moment and the surface to only 14° and maximize potential light emission efficiency. Furthermore, this tunability of the electronic transition that governs light emission in perovskites is unique and, coupled with their excellent photophysical properties, introduces a valuable method to extend the efficiencies and applications of perovskite based photonic devices beyond those based on current materials.

2D materials↗

The Intraplate Stress Field of West Africa

West Africa continues to host a growing number of low and intermediate-magnitude earthquakes (M2-5) along its passive margins, and its continental interior. Earthquake activity in these regions raises the need to comprehend the causes and the tectonic controls of the seismicity. Unfortunately, such studies are rare. Here, we apply single-station inversion techniques to constrain fourteen focal mechanisms, computed after compiling a set of high-quality waveforms. We describe the connection between seismicity, the contemporary stress field, anthropogenic activity and Holocene fault scarps in the region. Our results indicate transpressive stresses acting on the inherited brittle structures in the passive margins. We also observe a compressive regime in the intracontinental failed rifts. We attribute the seismicity to the reactivation of “weak” faults in the Neoproterozoic and Mesozoic failed rifts, the passive transform structures, and the intracratonic Precambrian brittle shear zones.

58 GEOSCIENCES↗

Analysis of a vinculin homolog in a sponge (phylum Porifera) reveals that vertebrate-like cell adhesions emerged early in animal evolution

The evolution of cell-adhesion mechanisms in animals facilitated the assembly of organized multicellular tissues. Studies in traditional animal models have revealed two predominant adhesion structures, the adherens junction (AJ) and focal adhesions (FAs), which are involved in the attachment of neighboring cells to each other and to the secreted extracellular matrix (ECM), respectively. The AJ (containing cadherins and catenins) and FAs (comprising integrins, talin, and paxillin) differ in protein composition, but both junctions contain the actin-binding protein vinculin. The near ubiquity of these structures in animals suggests that AJ and FAs evolved early, possibly coincident with multicellularity. However, a challenge to this perspective is that previous studies of sponges—a divergent animal lineage—indicate that their tissues are organized primarily by an alternative, sponge-specific cell-adhesion mechanism called “aggregation factor.” In this study, we examined the structure, biochemical properties, and tissue localization of a vinculin ortholog in the sponge Oscarella pearsei (Op). Our results indicate that Op vinculin localizes to both cell–cell and cell–ECM contacts and has biochemical and structural properties similar to those of vertebrate vinculin. We propose that Op vinculin played a role in cell adhesion and tissue organization in the last common ancestor of sponges and other animals. Furthermore, these findings provide compelling evidence that sponge tissues are indeed organized like epithelia in other animals and support the notion that AJ- and FA-like structures extend to the earliest periods of animal evolution.

59 BASIC BIOLOGICAL SCIENCES↗

β1 integrin mediates an alternative survival pathway in breast cancer cells resistant to lapatinib

The overexpression of human epidermal growth factor receptor (HER)-2 in 20% of human breast cancers and its association with aggressive growth has led to widespread use of HER2-targeted therapies, such as trastuzumab (T) and lapatinib (L). Despite the success of these drugs, their efficacy is limited in patients whose tumors demonstrate de novo or acquired resistance to treatment. The b1 integrin resides on the membrane of the breast cancer cell, activating several elements of breast tumor progression including proliferation and survival. We developed a panel of HER2-overexpressing cell lines resistant to L, T, and the potent LT combination through long-term exposure and validated these models in 3D culture. Parental and L/T/LT-resistant cells were subject to HER2 and b1 integrin inhibitors in 3D and monitored for 12 days, followed by quantification of colony number. Parallel experiments were conducted where cells were either stained for Ki-67 and Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) or harvested for protein and analyzed by immunoblot. Results were subjected to statistical testing using analysis of variance and linear contrasts, followed by adjustment with the Sidak method. Using multiple cell lines including BT474 and HCC1954, we reveal that in L and LT resistance, where phosphorylation of EGFR/HER1, HER2, and HER3 are strongly inhibited, kinases downstream of b1 integrin– including focal adhesion kinase (FAK) and Src–are up-regulated. Blockade of b1 by the antibody AIIB2 abrogates this up-regulation and functionally achieves significant growth inhibition of L and LT resistant cells in 3D, without dramatically affecting the parental cells. SiRNA against b1 as well as pharmacologic inhibition of FAK achieve the same growth inhibitory effect. In contrast, trastuzumab-resistant cells, which retain high levels of phosphorylated EGFR/HER1, HER2, and HER3, are only modestly growth-inhibited by AIIB2. Our data suggest that HER2 activity, which is suppressed in resistance involving L but not T alone, dictates whether b1 mediates an alternative pathway driving resistance. Our findings justify clinical studies investigating the inhibition of b1 or its downstream signaling moieties as strategies to overcome acquired L and LT resistance.

59 BASIC BIOLOGICAL SCIENCES↗