Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Response of CR-39 nuclear track detectors to protons with non-normal incidence

This paper presents data from experiments with protons at non-normal incidence to CR-39 nuclear track detectors, analyzing the properties of detection efficiency, proton track diameter, track contrast, and track eccentricity. Understanding the CR-39 response to protons incident at an angle is important for designing charged particle detectors for inertial confinement fusion (ICF) applications. This study considers protons with incident energies less than 3 MeV. In this regime, an incident angle of 10° has no effect on CR-39 detection efficiency, and >85% detection efficiency is preserved up through 25° in the range of 1.0 MeV–2.1 MeV. For ICF applications, incident angles above 30° are deemed impractical for detector design due to significant drops in proton detection at all energies. We observe significant reductions in detection efficiency compared to theoretical predictions, particularly at low energies where proton tracks are etched away. The proton track diameter measured by the scan system is observed to decrease with higher incident angles. The track diameters are analyzed with two fitting models, and it is shown that the diameter–energy relation can be fit with the existing models at angles up to 30°. The optical contrast of the tracks tends to increase with the angle, meaning that the tracks are fainter, and a larger increase is observed for higher energies. Eccentricity, a measure of how elongated proton tracks are, increases with the incident angle and drops after the critical angle. The lowest energy tracks remain nearly circular even at higher angles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Tomographic Galaxy Clustering with the Subaru Hyper Suprime-Cam First Year Public Data Release

We analyze the clustering of galaxies in the first public data release of the HSC Subaru Strategic Program. Despite the relatively small footprints of the observed fields, the data are an excellent proxy for the deep photometric datasets that will be acquired by LSST, and are therefore an ideal test bed for the analysis methods being implemented by the LSST DESC. We select a magnitude limited sample with $i<24.5$ and analyze it in four redshift bins covering $0.15\lesssim z \lesssim1.5$. We carry out a Fourier-space analysis of the two-point clustering of this sample, including all auto- and cross-correlations. We demonstrate the use of map-level deprojection methods to account for fluctuations in the galaxy number density caused by observational systematics. Through an HOD analysis, we place constraints on the characteristic halo masses of this sample, finding a good fit up to scales $k_{\rm max}=1\,{\rm Mpc}^{-1}$, including both auto- and cross-correlations. Our results show monotonically decreasing average halo masses, which can be interpreted in terms of the drop-out of red galaxies at high redshifts for a flux-limited sample. In terms of photometric redshift systematics, we show that additional care is needed in order to marginalize over uncertainties in the redshift distribution in galaxy clustering, and that these uncertainties can be constrained by including cross-correlations. We are able to make a $\sim3\sigma$ detection of lensing magnification in the HSC data. Our results are stable to variations in $\sigma_8$ and $\Omega_c$ and we find constraints that agree well with measurements from Planck and low-redshift probes. Finally, we use our pipeline to study the clustering of galaxies as a function of limiting flux, and provide a simple fitting function for the linear galaxy bias for magnitude limited samples as a function of limiting magnitude and redshift. [abridged]

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Codisposal Waste Package Loading Options for DOE SNF and HLW PPT

The U.S. Department of Energy (DOE) is responsible for managing spent nuclear fuel (SNF) that is currently in, or will in the future come into, its possession. DOE must continue to safely store that SNF, transport it to an interim storage site or a repository, and dispose of it. These fuels come from a wide range of reactor types with various cladding materials and enrichments. Many of these reactors, now decommissioned, had unique design features, such as core configuration, fuel element and assembly geometry, moderator and coolant materials, operational characteristics, and neutron spatial and spectral properties, resulting in a large diversity of reactor and fuel designs. Because of the wide variety and conditions of SNF, a robust DOE Standard Canister was proposed that would confine radionuclides and preclude moderator. The DOE Standard Canister had four variations: 3.05-meter (10-foot) or 4.57-meter (15-foot) length, and 45.7-cm (18-inch) or 61.0-cm (24-inch) diameter. For ultimate disposal in the Yucca Mountain Repository, these canisters were to be grouped with 61.0-cm (24-inch) diameter high level waste (HLW) canisters in a 2.13-meter (84-inch) diameter co-disposal waste package. The smaller 45.7-cm (18-inch) diameter DOE Standard Canister could be placed in the middle of five HLW canisters. The larger 61.0-cm (24-inch) diameter DOE Standard Canister would take the place of one of the five HLW canisters on the outer ring in the co-disposal waste package. No DOE Standard Canisters have been loaded. A preliminary evaluation has estimated the number of elements of a fuel type that can fit into the different sizes of the DOE Standard Canister, but no definitive loading configuration has been selected. Changing the loading configuration could impact the number of loadable DOE Standard Canisters and the number of co-disposal waste packages needed for eventual disposition. This paper conveys the ranges of DOE Standard Canisters and HLW canisters that may be produced under certain conditions. It also examines the differences in the estimated number of co-disposal waste packages produced for eventual disposal when using different loading strategies in the DOE Standard Canister for Advanced Test Reactor (ATR), Peach Bottom, and High Flux Isotope Reactor (HFIR) SNF. Changing the loading configurations of ATR, Peach Bottom, and HFIR SNF slightly impacted the number of co-disposal waste packages that may be needed for ultimate disposal. The change in loading configuration was more impactful when a different canister was used, as opposed to varying the number of elements that could fit inside the same size canister. In one case, a reduction of co-disposal waste packages could be achieved by allowing mixing of short HLW canisters with long DOE Standard Canisters. The main conclusion from this analysis is that the ratio between HLW canisters and DOE Standard Canisters will drive the total number of co-disposal waste packages. If too many HLW canisters (i.e., more than five times the number of 18-inch DOE standard canisters) or DOE Standard Canisters are produced, some co-disposal waste packages may not have all positions filled. A co-disposal waste package may be filled with all HLW with no DOE Standard Canister, or a co-disposal waste package could be filled with a single DOE Standard Canister. A ratio that does not closely align to optimum could allow for the design of waste packages that hold just HLW canisters or just DOE SNF canisters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Electrical circuit control in power systems

Electrical circuit control techniques in power systems are disclosed herein. In one embodiment, a supervisory computer in the power system can be configured to fit phasor measurement data from phasor measurement units into a Gaussian distribution with a corresponding Gaussian confidence level. When the Gaussian confidence level of the fitted Gaussian distribution is above a Gaussian confidence threshold, the supervisory computer can be configured to perform an ambient analysis on the received phasor measurement data to determine an operating characteristic of the power system. The supervisory computer can then automatically applying at least one electrical circuit control action to the power system in response to the determined operating characteristic.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Hydraulic Response to Thermal Stimulation Efforts at Raft River Based on Stepped Rate Injection Testing

The injection well stimulation project at the Raft River geothermal field tests the effect of long-term cold water injection and high pressure injection on well injectivity, improvements to which could reduce operating costs. The primary data for analysis and interpretation of the injection test are step-rate flow tests run before each new phase of the injection. These tests were analyzed using a combination of standard pump-test analytical solution methods and methods developed expressly for the observed conditions. The stepped rate injection tests, combined with long-term flow and pressure response data suggest that the well is located within a fractured formation of low transmissivity but high storativity. These calculated parameters appeared to increase with pressure during the first injection test and the higher values were reproduced during the second stepped rate test. Calculated transmissivity and storativity are on the order of 4E-5 m cm 2 and 1E-4 m Pa -1 , respectively. The apparent pressure dependence of fitted hydraulic parameters may reflect near-well fracture compliance that increased the effective radius of the wellbore during the first test. While the type curve fit analysis also suggests that the reservoir behaves as a uniformly fractured reservoir with a radial flow regime, the hydraulic parameters indicate that condition may exist only a very limited distance (<10 m) from the well. Longer-term pressure response suggests that flow in the system effectively reaches steady state in a period of less than a day, which may reflect pressure stabilization resulting from pressure-dependent permeability or a region of much higher permeability located with a few meters of the well. The transmissivity estimates obtained from this analysis, converted to approximate fracture density and aperture, provide useful constraints on the distance to which the thermal front may migrate from the well during the cold water injection phase of the stimulation project. We estimate that the cooling front will migrate less than a tenth of a kilometer over an approximately one-year injection period. Here, the effects of that cooling, however, may be substantial, because increases in permeability have maximum effect nearest the well.

cold water injection↗
DOE OSTI2021

Combining Spectroscopic Ellipsometry with Transmission Spectroscopy to Derive Accurate Optical Constants for Organic Materials

A method for deriving the optical constants of organic powdered materials in the mid-infrared spectral range is introduced using variable angle spectroscopic ellipsometry and transmission spectroscopy. The approach uses pressed pellets of the powder and is applied to organic solids, which have both strong and weak infrared absorption features. Many powders have significant voids and do not press into smooth, homogenous pellets. To account for pellet non-idealities and to accurately measure both n and k, three different forms of pellets were pressed and measured: A pure analyte pellet, a mixed analyte/KBr pellet with a large analyte percentage, and a KBr transmission pellet with only a small analyte percentage. Using all three pellets in a multi-sample analysis involving both ellipsometric and transmission data, the complex refractive index (n/k) values can be derived for many organic compounds. This method is illustrated to calculate the optical constants for anhydrous lactose from 6000-400 cm-1. The transmission measurements improve the spectral fitting of weak absorption features, and the multi-sample analysis enables a better determination of the significant void space that is present in the pure pellet, leading to lower values for both n and k if not properly accounted for in the multi-oscillator model used to fit the ellipsometric data.

Optical constants, refractive index, extinction co↗
DOE OSTI2021

Evaluating Cell Temperature Models and the Effect of Wind Speed in PV System Capacity Testing: Preprint

Capacity testing is a routine procedure for assessing a photovoltaic system's performance relative to expectations. The most common test method involves fitting a regression model that predicts system output power using operating weather conditions including wind speed. Structural modifications to the regression model to incorporate wind in different ways improved the model's ability to fit measured system performance, but the observed improvements were small and unlikely to change the result of a capacity test. However, the results showed that the choice of reporting wind speed and inclusion or exclusion of wind speed in the performance model used as the test benchmark can significantly change the test result.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

Measurements of Nuclear Effects and the $\bar \nu_\mu +H \to \mu^+ + n$ Cross Section in MINERνA with Neutron Tagging

MINERνA, or Main INjector ExpeRiment for ν-A, at Fermilab, is an experimentdedicated to the study of neutrino-nucleus interactions in the GeV regime. Itsgoal is to illustrate the interplay between hadronic and nuclear physics and measure intranuclear dynamics crucial for the present and future neutrino oscillationmeasurements. We first measure a set of variables sensitive to how Monte Carlo(MC) simulations of neutrino-nucleus interactions implement binding energy andthen move on to measure the antineutrino CCQE cross section on the hydrogentargets in MINERνA’s CH detector. We have developed a method to preferentially select events on the hydrogen by comparing outgoing neutrons’ directions totheoretical neutron directions assuming two-body interactions. We measured thecross section, extracted the axial form factor, and performed a Z-expansion fit. Weobserve larger values in the axial form factor at high Q2than current best fits. Finally, we show a preliminary selection of events with both protons and neutrons toinvestigate nuclear processes responsible for producing these final states.

Cai, Tejin↗
DOE OSTI2021

Methods for Precision Studies of Neutrino Interactions

Accelerator neutrino oscillation experiments provide a sensitive way to investigatea number of major open questions in neutrino physics. To achieve precision neutrinooscillation measurements, we need a good understanding of key aspects of the experiments,such as the detection technologies used and neutrino interactions at few-GeV energies.The MicroBooNE experiment has advanced the development of technologies for LArTPCs.An ultra-violet laser system was introduced to MicroBooNE in order to measure theelectric field in situ, which plays a central role in the formation of charge and lightsignals in LArTPCs. This thesis describes the setup and operation of the laser system. Ideveloped a general methodology to measure the electric field and the consequent spatialdistortion in LArTPCs, which supports precision measurements in accelerator neutrinooscillation experiments. In MicroBooNE, the measured electric field distortions are upto 15 ± 3 % with respect to the nominal value, and the measured spatial distortions areup to 15 ± 3 cm. The result of the electric field measurement is applied to the detectorsimulation and the event reconstruction, which leads to a better detector characterizationfor neutrino analyses. A significant concern for measurements of neutrino interactions ismodel dependence, as the currently available models are not sufficient for describing thepicture of neutrino interacting at few-GeV energies. In this thesis, I developed a detailedstrategy for a model-independent cross-section measurement at low energy transfers,where the available model predictions do not agree with the inclusive measurementsfrom multiple experiments. A likelihood fit technique for cross-section extraction isrealized in an accelerator neutrino experiment using a LArTPC for the first time. Thetreatment of systematic uncertainties developed in this thesis is generally applicable foranalyses using similar fitting techniques. This neutrino interaction study at low energytransfers provides a probe to the poorly understood region of neutrino cross sections. Themeasurement scheme developed here aims to guide future model-independent cross-sectionmeasurements, particularly for neutrino experiments using LArTPCs.

Chen, Yifan↗
DOE OSTI2020

Monte Carlo Global QCD Analyses of the Pion Parton Distribution Functions

As the lightest hadron, the pion presents itself as a dichotomy. While being the pseudo Goldstone boson associated with chiral symmetry breaking, it is simultaneously regarded as the lightest pseudoscalar meson typically composed of constituent quark and antiquark. As the chiral symmetry shares the same global symmetry as QCD, studying the pion and its internal structure is key in understanding one of the four fundamental forces of nature, namely the quantum chromodynamic strong interaction. We study the pion's parton distribution functions (PDFs), which are universal quantities that describe the structure of the pion in terms of its constituent quarks, antiquarks, and gluons. Our goal is to discover what the available data reveal for these universal quantities, namely the PDFs. Through the use of factorization theorems and perturbative QCD, we use Monte Carlo (MC) methods to extract the PDFs from the available Drell-Yan (DY) and leading neutron (LN) data. While the DY process involves two hadrons colliding, the LN electroproduction involves an electron beam incident on a target nucleon. We can constrain well the pion PDFs at large momentum fraction using DY data, and at low momentum fraction using LN data. We also use threshold resummation in the DY process to gather predictable higher order terms associated with the soft gluon radiation because their contributions to the cross section are nontrivial. In this dissertation, we parametrize the pion PDFs and fit those parameters to the available data. We make use of Bayesian inference and use MC techniques to sample the parameter space. Three sets of results are presented. We first extract the pion PDFs by fitting the DY and LN data. Then, we include transverse momentum dependent DY data in conjunction with the DY and LN data to extract the pion PDFs. Finally, we apply various methods of threshold resummation to the DY cross section and extract pion PDFs. The pion PDFs presented here are the first global QCD analyses performed as well as the first MC extracted pion PDFs, which are at the forefront of the pion PDF community.

Barry, Patrick↗
DOE OSTI2020

Sensitivities to neutrino non-standard interactions from the disappearance of muon (anti)neutrinos at the NOvA experiment

The experimental confirmation of the phenomenon of neutrino oscillations provided evidence for a non-zero value for the mass of neutrinos, a property not initially predicted by the Standard Model of Physics. Investigations of the existence of the so called Physics Beyond the Standard Model is a subject of growing interest and effort in the field of particle physics. Interactions of neutrinos with matter are well described by the Standard Model, however in the presence of new Physics, additional phenomena regarding neutrino properties would be possible, including non-standard interactions of neutrinos with matter. The NOvA experiment, at Fermilab, has been investigating neutrino oscillations through studies of ν µ produced at the Fermilab accelerator facilities, and also comprise a suitable environment for investigation of additional phenomena taking part in the neutrino oscillation framework. We show in this thesis the results of the sensitivity studies to neutrino non standard interactions in the NOvA experiment through investigation of the disappearance of muon (anti)neutrinos during their evolution in the NOvA 810 km baseline. We investigate the effect of the NSI parameters, |ε µτ | and δ µτ , on the determination of the standard oscillation parameters sin 2 (θ 23 ) and Δ$m^2_{32}$, as well as the relation between each parameter, for both neutrino mass hierarchies. This study makes use of an exposure of 9.48 × 10 20 POT for neutrino beam (FHC), and 12.33 × 10 20 POT for antineutrino beam (RHC). No deviations from the standard oscillation scenario is found at the 90% CL limit. The joint neutrino and antineutrino fit yields a limit of |ε µτ | ≤ 0.086 (0.085) for a fixed value of δ µτ = 0, and |ε µτ | ≤ 1.054 (1.053) for the case where both NSI parameters are fitted, for the normal (inverted) neutrino mass hierarchy, at the 90% CL. In the current sensitivity, all values of δ µτ are found to be allowed. The 90% CL interval for the standard oscillation parameters are Δ$m^2_{32}$ ϵ [2.379, 2.580] and sin 2 (θ 23 ) ϵ [0.420, 0.602] for the normal hierarchy scenario, and Δ$m^2_{32}$ ϵ [-2.639, - 2.438] and sin 2 (θ 23 ) ϵ [0.418, 0.602] for the inverted hierarchy scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

LArQL: A phenomenological model for treating light and charge generation in liquid argon

Experimental data shows that both ionization charge and scintillation light in LAr depend on the deposited energy density ($dE/dx$) and electric field ($\mathcal{E}$). Moreover, free ionization charge and scintillation light are anticorrelated, complementary at a given ($dE/dx$, $\mathcal{E}$) pair. We present LArQL, a phenomenological model that provides the anticorrelation between light and charge and its dependence on the deposited energy as well as on the electric field applied. It modifies the Birks' charge model considering the contribution from the escape electrons at null and low electric fields, and reconciles with Birks' model prediction at higher fields. Deviations from current Birks' model are observed for LArTPCs operating at low $\mathcal{E}$ and for heavily ionizing particles. The LArQL model presents a satisfactory description at $dE/dx$ and field ranges for interacting particles in LArTPCs and fits well the available data. Improvements via data sets compilation and global fits are also interesting features of the model.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Reverse-mode differentiation in arbitrary tensor network format: with application to supervised learning.

This paper describes an efficient reverse-mode differentiation algorithm for contraction operations of tensor networks that may have arbitrary and unconventional network topologies. The approach leverages the tensor contraction tree of Evenbly and Pfeifer (2014), which provides an instruction set for the contraction sequence of a network. We show that this tree can be efficiently leveraged for differentiation of a full tensor network contraction using a recursive scheme that exploits (1) the bilinear property of contraction and (2) the property that trees have single path from root to leaves. While differentiation of tensor-tensor contraction is already possible in most automatic differentiation packages, we show that exploiting these two additional properties in the specific context of contraction sequences can improve efficiency. Following a description of the algorithm and computational complexity analysis, we investigate its utility for gradient-based supervised learning for low-rank function recovery and for fitting real-world unstructured datasets. We demonstrate improved performance over alternating least-squares optimization approaches and the capability to handle heterogeneous and arbitrary tensor network formats. When compared to alternating minimization algorithms, we find that the gradient-based approach requires a smaller oversampling ratio (number of samples compared to number model parameters) for recovery. This increased efficiency extends to fitting unstructured data of varying dimensionality and when employing a variety of tensor network formats. Here, we show improved learning using the hierarchical Tucker method over the tensor-train in high-dimensional settings on a number of benchmark problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Determining the bubble nucleation efficiency of low-energy nuclear recoils in superheated C$_3$F$_8$ dark matter detectors

The bubble nucleation efficiency of low-energy nuclear recoils in superheated liquids plays a crucial role in interpreting results from direct searches for weakly interacting massive particle (WIMP) dark matter. The PICO Collaboration presents the results of the efficiencies for bubble nucleation from carbon and fluorine recoils in superheated C$_3$F$_8$ from calibration data taken with 5 distinct neutron spectra at various thermodynamic thresholds ranging from 2.1 keV to 3.9 keV. Instead of assuming any particular functional forms for the nuclear recoil efficiency, a generalized piecewise linear model is proposed with systematic errors included as nuisance parameters to minimize model-introduced uncertainties. A Markov-Chain Monte-Carlo (MCMC) routine is applied to sample the nuclear recoil efficiency for fluorine and carbon at 2.45 keV and 3.29 keV thermodynamic thresholds simultaneously. The nucleation efficiency for fluorine was found to be $\geq 50\, \%$ for nuclear recoils of 3.3 keV (3.7 keV) at a thermodynamic Seitz threshold of 2.45 keV (3.29 keV), and for carbon the efficiency was found to be $\geq 50\, \%$ for recoils of 10.6 keV (11.1 keV) at a threshold of 2.45 keV (3.29 keV). Simulated data sets are used to calculate a p-value for the fit, confirming that the model used is compatible with the data. The fit paradigm is also assessed for potential systematic biases, which although small, are corrected for. Additional steps are performed to calculate the expected interaction rates of WIMPs in the PICO-60 detector, a requirement for calculating WIMP exclusion limits.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Recent results from NOvA

We present the most recent 3-flavor neutrino oscillation results from the NOvA long-baseline experiment, using a joint fit of $\nu_\mu \to \nu_\mu$, $\bar{\nu}_{\mu} \to \bar{\nu}_{\mu}$, $\nu_\mu \to \nu_{e}$, and $\bar{\nu}_{\mu}\to \bar{\nu}_{e}$ channels, and an accumulated exposure of $13.6 \times 10^{20}$ protons-on-target of neutrino beam and $12.5 \times 10^{20}$ protons-on-target of antineutrino beam. The best-fit values for the atmospheric parameters are $\Delta m^2_{32} = (2.41\pm0.07)\times 10^{-3}$ eV$^2$, $\sin^2\theta_{23} = 0.57^{+0.03}_{-0.04}$ and $\delta_{CP} = (0.82^{+0.27}_{-0.87}) \pi$. The data disfavor combinations of oscillation parameters that lead to large asymmetries between the rates of $\nu_{e}$ vs $\bar{\nu}_{e}$ appearance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Sterile Neutrino Search with the NOvA Detectors

NOvA is a two-detector experiment designed to observe neutrino oscillations from νµ toνe flavor states. Additionally, the location of the NOvA Near Detector is well situated to additionally observe short base line oscillations to sterile neutrino states. We expand upon previous NOvA sterile neutrino searches by using a covariance matrix fitting technique. This analysis is the first with NOvA to directly include neutrino interactions in the Near Detector while fitting the data. The NOvA Near Detector’s greater statistics to better constrain our Far Detector uncertainties in addition to increasing the range of Δ m$^2_{41}$ to which we are sensitive.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Split HPWHs as an Efficient Solution for Multifamily Buildings with In-Unit Water Heaters

A quarter of all housing units in the United States are found in multifamily buildings, but few efficiency innovations have been made to improve electric water heating systems in this building type. Domestic hot water in multifamily buildings can either be provided by a large central water heater or smaller in-unit water heaters. Integrated heat pump water heaters that are installed in single-family homes are often a poor fit for individual multifamily units because the water heaters are often located in small internal closets. This confined space can limit the airflow to the heat pump, and the cold exhaust air can cause discomfort and reduced efficiency. Split CO2 HPWHs separate the tank from the heat pump, which allows for installation location flexibility. Further, CO2 heat pumps can operate under colder ambient conditions, making them a better fit for multifamily units across a wide range of climate regions. As part of a larger project to characterize split HPWH performance, we evaluated the feasibility of installing an additional, parallel tank that could provide hot water to a second housing unit using a single CO2 heat pump. This approach would reduce the first costs of these more expensive units. Based on the high draw volume that we imposed on both tanks, the same heat pump may be able to support more tanks, depending on hot water usage. This paper will describe the split CO2 HPWH technology, how the two-tank system was controlled, and results from our laboratory evaluation.

CO2 HPWH↗
DOE OSTI2022

System and method for measuring sun-induced chlorophyll fluorescence

A chlorophyll fluorescence measuring system having at least one spectrometer coupled to a data logger. The data logger provides direct control of the spectrometer and includes on-board memory for storage of target and reference spectrum data obtained by the spectrometer. The data logger may be coupled to an external computer that receives and analyzes target and reference spectrum data to determine SIF using a spectral fitting algorithm. The system may include a spectrometer aiming system coupled to and controlled by the data logger. The system may also include one or more environmental sensors configured to measure environment variables. The environmental sensors may be coupled to the data logger for control and data storage. The environmental data may be communicated to the external computer for use in the spectral fitting algorithm. The data logger may be connected to a network for remote monitoring and control.

Gu, Lianhong↗