Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Real-World Distribution System Modeling Framework for Transmission-and-Distribution Cosimulation: Preprint

This paper presents a modeling methodology for realistic distribution system simulation and analysis. The methodology involves three major approaches: utility model conversion, feeder load modeling, and feeder model validation. The feeder models obtained from the utility are converted to the format that is more flexible for analysis and algorithm development. The load profiles down to each node are modeled in detail using advanced metering infrastructure data and supervisory control and data acquisition (SCADA) system measured load data. Then the distribution system models are validated by comparing the simulated feeder-head voltage results and SCADA measured voltage data. To better understand the bulk system operations and the interactions between transmission and distribution systems, the modeled realistic distribution systems are integrated into a transmission-and-distribution cosimulation framework to perform the system simulation from the bulk system down to each node in the distribution system.

load modeling↗
DOE OSTI2022

Internal conversion and intersystem crossing dynamics based on coupled potential energy surfaces with full geometry-dependent spin–orbit and derivative couplings. Nonadiabatic photodissociation dynamics of NH 3 (A) leading to the NH(X 3 Σ – , a 1 Δ) + H 2 channel

Here we simulate the photodissociation of NH 3 originating from its first excited singlet state S 1 into the NH 2 + H (radical) and NH + H 2 (molecular) channels. The states considered are the ground singlet state S 0 , the first excited singlet state S 1 and the lowest-lying triplet state T 1 , which permit for the first time a uniform treatment of the internal conversion and intersystem crossing. The simulations are based on a diabatic potential energy matrix (DPEM) of S 0 , S 1 coupled by a conical intersection seam, as well as a potential energy surface (PES) for T 1 coupled by spin-orbit coupling (SOC) to the two singlet states. The DPEM and PES are fitted to ab initio electronic structure data (ESD) including energies, energy gradients, and derivative couplings. The DPEM also defines an adiabatic to diabatic state (AtD) transformation, which is used to transform the singular adiabatic SOC into a smooth function of the nuclear coordinates in the diabatic representation, allowing the diabatic SOC to be fit to an analytical functional form. ESD and SOC data obtained from these surfaces can serve as input for either quantum or semi-classical characterization of the nonadiabatic dynamics. Using the SHARC suite of programs, nonadiabatic simulations based on over 40 000 semi-classical trajectories assess the convergence of our results. The production of NH + H 2 is not direct, but is only achieved through a quasi-statistical dissociation mechanism after internal conversion to the ground electronic state. This leads to a much lower yield comparing with the main NH 2 + H channel. The NH(X 3 Σ_) radical produced through the intersystem crossing from S 0 to T 1 is rare (~0.2%) compared to NH(a 1 Δ) due to the process being spin forbidden.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Holistic Fuel Cell Electric Vehicle/Hydrogen Station Optimization Model (CRADA CRD-18-00745 Final Report)

The National Renewable Energy Lab (NREL), Argonne National Lab (ANL), Sandia National Lab (SNL), and Frontier Energy, Inc comprise a team that will perform a review of currently available models that can simulate both a hydrogen station and a fuel cell electric vehicle (FCEV), and whose owners are willing to make them available freely. We will then down select to a single model or model pair, secure agreements for their free use, and validate the resulting model or coupled models. For example, we may evaluate an existing 1-D hydrogen fueling model developed by Kyushu University for the Japanese New Energy and Industrial Technology Development Organization (NEDO). The validation will take place using data from various sources, potentially including the European Joint Research Center (JRC) HyTransfer project, SAE testing performed by Powertech to validate SAE J2601, and whole-station validation using the NREL’s Hydrogen Infrastructure Testing and Research Facility (HITRF). The team will make the model and all the validation data open to the public at the end of the project.

1-D hydrogen fueling model↗
NASA NTRS1980

Digital multiplexing of analog data in a microprocessor controlled data acquisition system

The purpose of the paper is to explore the ramifications of doing the multiplexing function in the digital domain and of using the microprocessor to replace the hardwired control logic which resides in the typical analog to digital converter. Two types of conversion (one working in parallel inputs, and one in sequential order) strategies are discussed where the microprocessor is in full control of the conversion. One advantage of using a digital multiplexor is that, contrary to an analog multiplexor, it does not degrade the fidelity of the conversion process.

Cliff, R. A.↗
DOE OSTI2020

Flexible, Multipurpose Laboratory Advances Building and Thermal Energy Systems: Expanding Evaluation and Development of Grid-Interactive Buildings

Robust hardware and controls are necessary to ensure results match their intent before they can be used broadly. However, this often requires multiple field experiments in a variety of climate zones. In the field, it is more difficult to obtain information on other important factors, such as thermal, grid, and occupant interaction. Gaps also exist in understanding the performance degradation and life cycle of thermal energy systems as they relate to buildings. There is a lack of robust, high-quality performance data for projects at scale; this data can be expensive to produce and often remain proprietary.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1991

Parametric entry corridors for lunar/Mars aerocapture missions

Parametric atmospheric entry corridor data are presented for Earth and Mars aerocapture. Parameter ranges were dictated by the range of mission designs currently envisioned as possibilities for the Human Exploration Initiative (HEI). This data, while not providing a means for exhaustive evaluation of aerocapture performance, should prove to be a useful aid for preliminary mission design and evaluation. Entry corridors are expressed as ranges of allowable vacuum periapse altitude of the planetary approach hyperbolic orbit, with chart provided for conversion to an approximate flight path angle corridor at entry interface (125 km altitude). The corridor boundaries are defined by open-loop aerocapture trajectories which satisfy boundary constraints while utilizing the full aerodynamic control capability of the vehicle (i.e., full lift-up or full lift-down). Parameters examined were limited to those of greatest importance from an aerocapture performance standpoint, including the approach orbit hyperbolic excess velocity, the vehicle lift to drag ratio, maximum aerodynamic load factor limit, and the apoapse of the target orbit. The impact of the atmospheric density bias uncertainties are also included. The corridor data is presented in graphical format, and examples of the utilization of these graphs for mission design and evaluation are included.

Ling, Lisa M.↗
DOE OSTI2024

Urban morphology and urban water demand evolution in the Los Angeles region

Detailed description of the dataset sources used in this study, the experimental workflow, and plotting for the paper figures provided at the associated GitHub Meta Repo: https://github.com/IMMM-SFA/Ferencz_et_al_2024_ERL The future water demand projections from this study are hypothetical future water demands that reflect the population and urban land cover changes represented by the scenarios considered. The intent and emphasis of this work is investigating the interactions between population change, evolution of urban morphology, and water demand. These projections are not meant to be likely future demands for specific water providers or the LA region and should not be interpreted as such. The folders contain input and output data for each step of the "Recreate my Experiment" workflow described in the associated GitHub meta-repository as well as data used for plotting Figures for the paper that this dataset supports. Description of each folder's contents and use: Step_1a: All necessary inputs to the associated python script provided on the GitHub repo. Step_1b: All necessary inputs (downscaled population rasters) used by the associated python script provided on the GitHub repo. Original 1-km squared rasters that were downscaled also provided. Step_1c: Urban growth projection rasters corresponding to SSP3 and SSP5 population scenarios are provided in separate subfolders as well as the water provider boundaries used for analysis. Outputs of data processing also provided. Associated python script provided on GitHub. Step_1d: Description of Inputs used by the QGIS Model Builder GUI that automates geospatial processing and clipping the of the high resolution land cover data for each urban land class footprint within a defined polygon boundary. The Model Builder is provided on the GitHub repo and can be used by QGIS. The outputs of this step are in "Clipped Provider Hi Res Landcover". If the user wants to use The Model Builder for different regions of LA or two test our outputs, they will need to download the hi resolution landcover raster listed in the Readme and in Ref [2] of the GitHub Page. Step_1e: All necessary inputs to generate average monthly demand for each water provider. Associated python script on GitHub. Step 2: Output data about land cover metrics (areas and fractions) for each urban land class for each water provider. Associated python script on GitHub. Uses outputs from Step 1d "Clipped Provider Hi Res Landcover" Step 3: Inputs for and Outputs from the urban projection raster analysis Python script on GitHub. The outputs are rasters of urban pixels that were converted to a higher land class and the number of land class units that changed (Values of 1, 2, or 3). For example, a value of 2 could be LC 21 -> 23 or LC 22 -> 24. These maps are label "intensification." The other outputs are "urban growth" rasters showing the conversion of non urban to urban land, which are indicated by pixel values of 1. Step 4: Output projections of indoor and outdoor annual and monthly demands for each water provider. These are used for Figures 4 - 7 of the paper. Figures: This folder has data used for plotting Figures 1 through 5. Data for Figures 6 and 7 are sourced directly from folders associated with the Processing and Analysis Steps 1 - 4 and the plotting scripts for Figures 6 and 7 are commented with what folder paths are needed to generate the figures. The GitHub page provides descriptions of how each figure was made and the associated plotting scripts used.

Los Angeles↗
DOE OSTI2021

Evaluation of hybrid evaporative-vapor compression air conditioners for different global climates

Currently, a majority of global residential air-conditioning requirements are met using cooling systems based on the vapor compression cycle (VCC). To meet the future demand for space cooling and to reduce the corresponding environmental impact, there is a need for alternative cooling systems which require less resources and exhibit a higher coefficient of performance (COP). One of proposed alternatives is called the hybrid evaporative-vapor compression (HEVC) cycle, which utilizes adiabatic latent cooling in combination with the VCC. In this paper, we conducted a feasibility analysis of a HEVC system by comparing its performance to that of VCC for various global climates. To accomplish this, we developed and validated models to simulate the performance of residential VCC and HEVC systems. ASHRAE weather data and design conditions were then used to compare the performance of the two systems. In general, HEVC systems are best suited for hot arid climates with energy reduction greater than 20%. Conversely, humid climates are not suitable for HEVC adoption due to degraded performance of evaporative coolers in these climates. In addition to comparing the energy savings from HEVC systems, it is also critical to analyze their water consumption. Generally, climates that benefit the most from HEVC technology tend to also experience water scarcity issues. Thus, both the energy savings and water consumption of HEVC systems must be analyzed to guide the discussion on their adoption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Multiscale Modeling of Plutonium Radiation Chemistry in Nitric Acid Solutions. 1. Cobalt-60 Gamma Irradiation of Pu(IV)

We report careful manipulation of the plutonium oxidation states is essential in the study and utilization of its rich redox chemistry. To achieve this level of control, a comprehensive mechanistic understanding of radiation-induced plutonium redox chemistry is critical due to the unavoidable exposure of plutonium to ionizing radiation fields, both inherent and from in-process applications. To this end, we have developed an experimentally evaluated multiscale computer model for the prediction of gamma radiation-induced Pu(IV) redox chemistry in concentrated nitric acid solutions (1.0, 3.0, and 6.0 M). Under these acidic, aqueous solution conditions, cobalt-60 gamma irradiation afforded marginal net conversion of Pu(IV) to Pu(VI), the extent of which was dependent on the concentration of HNO 3 and absorbed gamma dose. Multiscale calculations, which are in excellent agreement with experimental data, indicate that this observation is due to a combination of inherent plutonium disproportionation reactions and several radiation-induced processes, including redox cycling between Pu(IV) and Pu(III), as achieved by the reduction of Pu(IV) by nitrous acid and hydrogen peroxide, the oxidation of Pu(III) by nitrate and hydroxyl radicals, and the sequential oxidation of Pu(IV) to Pu(V) and Pu(VI) by the remaining available yield of nitrate radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quasioptical propagation and absorption of electron cyclotron waves: simulations and experiment

Electron-cyclotron resonance heating is an essential tool for manipulating fusion plasmas and has been diligently studied for decades through numerical simulations and experiments. Here, we report the first comparison of simulations using the quasioptical code PARADE (PAraxial RAy DEscription) with experiments using a target-plate system on the Large Helical Device. We find that the numerical and experimental results agree qualitatively, which makes PARADE a promising code for modeling of electron-cyclotron wave beams in future experiments. The signature advantage of PARADE is its ability to capture both mode conversion and inhomogeneity of the dissipation rate across the beam cross section. Accounting for these effects, which can noticeably affect the power deposition, significantly improves the agreement between numerical results and experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Woody Feedstocks 2019 State of Technology Report

The U.S. Department of Energy promotes production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the state of technology (SOT). As part of its involvement with this overall mission, Idaho National Laboratory completes annual SOT reports for nth-plant biomass feedstock logistics. The purpose of the SOTs is to provide the status of feedstock supply system technology development for biomass to biofuels, based on actual data and experimental results relative to technical targets and cost goals from specific design cases. The 2019 Woody Feedstock SOT presents the State of Technology for feedstock supply to three individual thermochemical conversion pathways that utilize woody feedstocks: Indirect Liquefaction (IDL), Catalytic Fast Pyrolysis (CFP), and Algal-blend Hydrothermal liquefaction (AHTL). The 2019 reactor throat delivered feedstock costs were found to be $63.54/dry ton, $70.15/dry ton and $70.31/dry ton, respectively (2016$).

09 BIOMASS FUELS↗
NASA NTRS1972

An improved data transfer and storage technique for hybrid computation

Improved technique was developed for transferring and storing data at faster than real time speeds on hybrid computer. Predominant advantage is combined use of electronic relays, track and store units, and analog-to-digital and digital-to-analog conversion units of hybrid computer.

Hansing, A. M.↗
NASA NTRS1971

Microwave emission from stars.

An attempt is made to summarize the observations of masered emission from stars and to outline some basic conclusions that can be drawn from the data. The association of masered microwave emission with well studied objects like stars makes it possible to use the information gathered by conventional optical observations to attack the general masering problem and, conversely, the radio observations may be used to obtain information about a star not readily accessible optically, such as the mass loss rate or the physical conditions in a circumstellar shell.

Schwartz, P. R.↗
NASA NTRS1973

A spaceborne receiver for measuring electromagnetic field intensity

Description of a very accurately controlled receiver for monitoring the electromagnetic radiations in both existing and projected space communication bands. Based on analysis of the existing and projected space communication bands, 108 to 174 MHz, 240 to 478 MHz, and 1535 to 1665 MHz were covered. The receiver achieves accurate control via a digitally tuned synthesizer and a wide range of digital control including frequency band coverage and gain control selection. Digital memory was provided to store 16 separate digital command instructions which can be programmed via a command data link. The receiver provides for transmission to the ground of both a predetection signal and signals in digital format, which in turn, were provided by sampling and analog-to-digital conversions.

Reich, B. W.↗
NASA NTRS1975

Causes of Forbush decreases and other cosmic ray variations

The relationship between neutron monitor variations and the intensity variations of the interplanetary magnetic field is studied by using Deep River data and Imp series satellite data. In over 80% of the cases studied in 1968, identifiable depressions of the cosmic ray intensity are associated with magnetic field enhancements of several hours duration and intensity above 10 gamma. Conversely, almost every magnetic field enhancement has an identifiable effect (though not necessarily a marked depression) on the cosmic ray intensity. Perpendicular gradient drifts are suggested as one possible mechanism producing the individual decreases, and some ideas on the recovery processes are presented. Long-lasting Forbush decreases are found to be the consequence of the action of several successive magnetic field enhancements. Evidence is presented that indicates that most of these enhancements are caused by the steepening of streams in interplanetary space.

Barouch, E.↗
NASA NTRS1977

An automated consultant for MACSYMA

A consultant is necessary whenever on is faced with a problem solving situation in a domain one does not fully understand. The lack of knowledge may be incidental, as it is when the domain or device is fairly simple but time constraints make it impossible for the user to learn all that is necessary. Computer systems like MACSYMA in which the level of commands is so close to the level of the task environment that the user is apt to confuse a simply defined procedure (like COEFF) with its mathematical counterpart (here coefficient) that it at best approximates. A computer program is described which has the capability of conversing with its user in English about a difficulty he has encountered, and providing information tailored to his need. The MACSYMA Advisor is a program distinct from MACSYMA with its own separate data base and expertise. For convenience the program can be called directly from MACSYMA and can access the user's data structures contained therein. The Advisor described here deals only with the "straightline" or nested use of MACSYMA commands and not loops or user-defined functions. The implementation of the Advisor relies heavily on an explict, internal "model" of the user's state of knowledge, his goals, and his "plan" for achieving them.

Genesereth, M. R.↗
NASA NTRS1981

On the correction for quantization effects in signal-to-noise ratio estimation

In sampled data digital telemetry systems the signal to noise ratio (SNR) is typically derived as a function of the moments of the digitized input stream (e.g., the receiver output). This analog to digital conversion process is itself an additional noise source known as the quantization noise. Thus a digitally measured SNR will only approximately represent the SNR of the analog input signal. A procedure (Sheppard's corrections) for correcting moments of any order for this quantization effect is presented.

Howard, L.↗
NASA NTRS1994

SIGMA: A Knowledge-Based Simulation Tool Applied to Ecosystem Modeling

The need for better technology to facilitate building, sharing and reusing models is generally recognized within the ecosystem modeling community. The Scientists' Intelligent Graphical Modelling Assistant (SIGMA) creates an environment for model building, sharing and reuse which provides an alternative to more conventional approaches which too often yield poorly documented, awkwardly structured model code. The SIGMA interface presents the user a list of model quantities which can be selected for computation. Equations to calculate the model quantities may be chosen from an existing library of ecosystem modeling equations, or built using a specialized equation editor. Inputs for dim equations may be supplied by data or by calculation from other equations. Each variable and equation is expressed using ecological terminology and scientific units, and is documented with explanatory descriptions and optional literature citations. Automatic scientific unit conversion is supported and only physically-consistent equations are accepted by the system. The system uses knowledge-based semantic conditions to decide which equations in its library make sense to apply in a given situation, and supplies these to the user for selection. "Me equations and variables are graphically represented as a flow diagram which provides a complete summary of the model. Forest-BGC, a stand-level model that simulates photosynthesis and evapo-transpiration for conifer canopies, was originally implemented in Fortran and subsequenty re-implemented using SIGMA. The SIGMA version reproduces daily results and also provides a knowledge base which greatly facilitates inspection, modification and extension of Forest-BGC.

Dungan, Jennifer L.↗