Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “consumer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

The Dominant Influencer of Voltage Fluctuation (DIVF) for Power Distribution System

Variability in power generation at multiple consumer owned renewable energy sources can cause random voltage fluctuations, which may result in voltage violations at multiple nodes in a power distribution system. Traditional methods of voltage control are ineffective to address fast voltage variations. New dynamic methods of voltage control using end user devices can significantly benefit from the knowledge of the dominant influencer of voltage fluctuation (DIVF). This paper introduces information theoretic metrics to identify DIVF for every node in the power distribution system. A node can be DIVF due to its location in the distribution system and its capacity to generate and change its power. Use of traditional power flow algorithms to identify the DIVF is computationally complex which limits their use in real-time applications. In this work, information theoretic indicators of the DIVF are computed analytically in a computationally efficient manner, and their effectiveness to identify the DIVF is tested using the IEEE 69 node test system. From simulations, it is illustrated that differential entropy, Kullback-Leibler distance and Frechet distance are effective indicators of the DIVF and can successfully identify the most influential nodes providing the foundation for intelligent voltage control.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Data and Code for 'GHG Mitigation and Land Use Change Implications of Sustainable Aviation Fuel in the United States'

BEPAM, Biofuel and Environmental Policy Analysis Model, models the agricultural sector and determines economically optimal land-use and feedstock mix at the US scale by maximizing the sum of agricultural sector consumers’ and producers’ surplus subject to various resource balances, land availability, and technological constraints under a range of biomass prices, from zero to $140 Mg-1 over the 2016-2030 period. Here BEPAM is used to model SAF production using energy crops and crop residues. BEPAM uses the GAMS format and uses yield and GHG balance projections from the biogeochemical model, DayCent.

09 BIOMASS FUELS↗
DOE OSTI2011

EnergySavers: Tips on Saving Money & Energy at Home (Brochure)

The U.S. Department of Energy's consumer guide to saving money and energy at home and on the road. It consists of the following articles: (1) Save Money and Energy Today - Get started with things you can do now, and use the whole-house approach to ensure that your investments are wisely made to save you money and energy; (2) Your Home's Energy Use - Find out how your home uses energy, and where it's losing the most energy so you can develop a plan to save in the short and long term; (3) Air Leaks and Insulation - Seal air leaks and insulate your home properly so your energy dollars don't seep through the cracks; (4) Heating and Cooling - Use efficient systems to heat and cool your home, and save money and increase comfort by properly maintaining and upgrading equipment; (5) Water Heating - Use the right water heater for your home, insulate it and lower its temperature, and use less water to avoid paying too much; (6) Windows - Enjoy light and views while saving money by installing energy-efficient windows, and use strategies to keep your current windows from losing energy; (7) Lighting - Choose today's energy-efficient lighting for some of the easiest and cheapest ways to reduce your electric bill; (8) Appliances - Use efficient appliances through-out your home, and get greater performance with lower energy bills; (9) Home Office and Electronics - Find out how much energy your electronics use, reduce their out-put when you're not using them, and choose efficient electronics to save money; (10) Renewable Energy - Use renewable energy at home such as solar and wind to save energy dollars while reducing environmental impact; (11) Transportation - Choose efficient transportation options and drive more efficiently to save at the gas pump; and (12) References - Use our reference list to learn more about energy efficiency and renewable energy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2011

Effect of Environmental Factors on Sulfur Gas Emissions from Drywall

Problem drywall installed in U.S. homes is suspected of being a source of odorous and potentially corrosive indoor pollutants. The U.S. Consumer Product Safety Commission's (CPSC) investigation of problem drywall incorporates three parallel tracks: (1) evaluating the relationship between the drywall and reported health symptoms; (2) evaluating the relationship between the drywall and electrical and fire safety issues in affected homes; and (3) tracing the origin and the distribution of the drywall. To assess the potential impact on human health and to support testing for electrical and fire safety, the CPSC has initiated a series of laboratory tests that provide elemental characterization of drywall, characterization of chemical emissions, and in-home air sampling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Strategy Guideline: Mitigation of Retrofit Risk Factors

The Alliance for Residential Building Innovation (ARBI) is currently developing strategies designed to promote and achieve increased energy savings and promote upgrades in the residential retrofit sector. These strategies are targeted to retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations. This report focuses on four key areas to promote home energy upgrades: fostering accurate energy savings projections; understanding consumer perceptions for energy savings; measuring energy savings, and ensuring quality control for retrofit installations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2013

Energy Efficient Digital Networks

Digital networks are the foundation of the information services, and play an expanding and indispensable role in our lives, via the Internet, email, mobile phones, etc. However, these networks consume energy, both through the direct energy use of the network interfaces and equipment that comprise the network, and in the effect they have on the operating patterns of devices connected to the network. The purpose of this research was to investigate a variety of technology and policy issues related to the energy use caused by digital networks, and to further develop several energy-efficiency technologies targeted at networks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2012

Strategy Guideline: Mitigation of Retrofit Risk Factors

The Alliance for Residential Building Innovation (ARBI) Building America team is currently developing strategies designed to promote and achieve increased energy savings and promote upgrades in the residential retrofit sector. These strategies are targeted to retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations. This report focuses on four key areas to promote home energy upgrades: fostering accurate energy savings projections; understanding consumer perceptions for energy savings; measuring energy savings, and ensuring quality control for retrofit installations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2016

Impacts of Model Building Energy Codes

The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO 2 emissions at the state level and at aggregated levels. This analysis does not represent all potential savings from energy codes in the U.S. because it excludes several states which have codes which are fundamentally different from the national model energy codes or which do not have state-wide codes. Energy codes follow a three-phase cycle that starts with the development of a new model code, proceeds with the adoption of the new code by states and local jurisdictions, and finishes when buildings comply with the code. The development of new model code editions creates the potential for increased energy savings. After a new model code is adopted, potential savings are realized in the field when new buildings (or additions and alterations) are constructed to comply with the new code. Delayed adoption of a model code and incomplete compliance with the code’s requirements erode potential savings. The contributions of all three phases are crucial to the overall impact of codes, and are considered in this assessment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Co-Optimization of Fuels & Engines: Misfueling Mitigation

This report examines diesel/gasoline misfueling, leaded/unleaded gasoline misfueling, E85/E15/E10 misfueling, and consumer selection of regular grade fuel over premium grade fuel in an effort to evaluate misfueling technologies that may be needed to support the introduction of vehicles optimized for a new fuel in the marketplace. This is one of a series of reports produced as a result of the Co-Optimization of Fuels & Engines (Co-Optima) project, a Department of Energy-sponsored multi-agency project to accelerate the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2014

Building Energy Codes Program: National Benefits Assessment (1992-2040)

Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, assuring reductions in energy use and greenhouse gas emissions over the life of buildings. DOE, through the Building Energy Codes Program, supports the improvement of energy efficiency in buildings. BECP periodically assesses the impacts of its activities by estimating historical and projected energy savings, consumer savings, and avoided emissions. The Pacific Northwest National Laboratory conducted the codes benefits assessment in support of the BECP. Underlying the assessment is a series of calculations that estimate and compare energy savings under two scenarios: "with BECP" and "without BECP." The analysis covers the years 1992-2040 and includes comparing the nominal energy savings (assuming 100 percent adoption and compliance) attributable to different code versions, determining the applicable floor space (both residential and commercial) subject to the code, and estimating the final energy savings by adjusting nominal energy savings for the applicable floor space according to the estimated actual adoption and compliance levels. The resulting estimates of energy consumption for each scenario are compared, and the difference equals the impact of BECP activities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Product Innovation to Increase Low-to-Moderate-Income Customers' Adoption of Community Solar PV

This study aims to comprehensively analyze community solar project preferences for consumers and suppliers by conducting three distinct analyses. First we analyze the predictors of community solar contract adoption to understand how individual priorities affect the probability of adoption. Using an original data set of survey responses from potential community solar customers, we analyzed the predictors of contract adoption by employing a weighted logit model. We find that individuals who were previously familiar with community solar projects were significantly more likely to adopt than those who were not familiar. Secondly, a survey of community solar developers and financiers identified industry perceived barriers to community solar access and inclusion. Thirdly, we gathered payment performance information from community solar initiatives to measure how financial risks are perceived and how they interact with customer demographics. Our study is beneficial to the public by providing insights into the drivers and barriers of community solar adoption and sheds light on the importance of understanding individual priorities in designing effective community solar policies. The community solar industry has changed significantly since the beginning of this project. The industry continues to grow at a rapid rate, with an additional 7 gigawatts expected to come online between 2022 and 2027. With federal pressure to meet climate goals, as the harms of climate change continue to impact everybody, legislators are looking to community solar as a method to achieving their states energy policy goals. These new policies that push for low-to-moderate inclusion, coupled with the increase in community solar capacity illustrate a new era for the community solar industry. A number of policies have arisen in the last few months that push for more inclusive practices including the groundbreaking Solar for All program run by the EPA. The research created a “best practice” contract that can then be used, in conjunction with the manuscript and validated study, to pitch the industry on a more inclusive community solar product.

14 SOLAR ENERGY↗
DOE OSTI2025

Development of an Interactive Valuation Model for Distributed Energy Resource Value: Cooperative Research and Development (Final Report)

The Oklahoma Office of the Secretary of Energy and Environment (OSEE) seeks to address perceived challenges and barriers to the deployment of distributed energy generation resources (DERs), including solar and other technologies, in the state of Oklahoma. The Scope of Work (SOW) associated with CRD-18-762 covers two tasks: (1) Interactive Valuation Model Requirements Document and (2) Consumer Protection Assessment. Follow-on work was completed under a separate CRADA (CRD-19-00788).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

The Toughness of High-Strength Steel Weld Metals

Low-temperature phase transformation (LTPT) welding consumables are a new class of welding wires developed to mitigate hydrogen-induced cracking in the welding of high-strength steels without preheating or postweld heat treatment. LTPT weld metals have a high strength, but their toughness needs further investigation. LTPT weld metals predominately contain a martensite microstructure, which is necessary to achieve high strength; however, martensitic weld metals containing oxide inclusions have relatively poor toughness. For this study, three welding processes — gas metal arc welding (GMAW), gas tungsten arc welding (GTAW), and hot wire GTAW — were investigated. Optical microscopy, scanning electron microscopes, and transmission electron microscopes were employed for characterization. The role of the shielding gas in the formation of oxide inclusions in LTPT weld metals was investigated. The formation of oxide inclusions in the weld metals was related to the CO 2 in the shielding gas. When 100% Ar or a pure inert shielding gas mixture was used for all three welding processes, oxide inclusions were greatly reduced, and the weld metal toughness improved considerably, matching the base metal toughness. The mechanism by which inclusions promote fracture propagation in the weld metal was proposed.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Sensory characterization of a ready-to-eat sweetpotato breakfast cereal by descriptive analysis

The sweetpotato [Ipomoea batatas (L.) Lam], an important industry in the United States, has been selected as a candidate crop to be grown on future long-duration space missions by NASA. Raw sweetpotato roots were processed into flour, which was used to formulate ready-to-eat breakfast cereal (RTEBC). Twelve trained panelists evaluated the sensory attributes of the extruded RTEBC using descriptive analysis. The samples were significantly different (P<0.05) for all attributes. Twelve perceived sensory attributes, which could be used to differentiate the appearance, texture, and flavor of sweetpotato RTEBC, were described. The data could be used to optimize the RTEBC and for designing studies to test its consumer acceptance.

NASA Discipline Life Support Systems↗
NASA NTRS2023

Sources of L-Band RFI Determined From Kurtosis Using the SMAP Radiometer

Among the parameters of the signal measured by the SMAP radiometer to identify RFI is kurtosis which indicates the departure of the received signal from a gaussian distribution and therefor helpful in identifying RFI. But the kurtosis has the potential to provide additional information. This manuscript reports results of an investigation examining the connection between the level of kurtosis (K) and the characteristics of the source of the RFI. It is shown, for example, that the level of can be used to distinguish the short pulse, relatively wideband RFI associated with radar from the narrow bandwidth signals associated with faulty consumer electronics.

Radio Frequency Interference↗
DOE OSTI2012

Promoting the Market for Plug-in Hybrid and Battery Electric Vehicles: Role of Recharge Availability

Much recent attention has been drawn to providing adequate recharge availability as a means to promote the battery electric vehicle (BEV) and plug-in hybrid electric vehicle (PHEV) market. The possible role of improved recharge availability in developing the BEV-PHEV market and the priorities that different charging options should receive from the government require better understanding. This study reviews the charging issue and conceptualizes it into three interactions between the charge network and the travel network. With travel data from 3,755 drivers in the National Household Travel Survey, this paper estimates the distribution among U.S. consumers of (a) PHEV fuel-saving benefits by different recharge availability improvements, (b) range anxiety by different BEV ranges, and (c) willingness to pay for workplace and public charging in addition to home recharging. With the Oak Ridge National Laboratory MA3T model, the impact of three recharge improvements is quantified by the resulting increase in BEV-PHEV sales. Compared with workplace and public recharging improvements, home recharging improvement appears to have a greater impact on BEV-PHEV sales. The impact of improved recharging availability is shown to be amplified by a faster reduction in battery cost.

25 ENERGY STORAGE↗