Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Influence of substituting Sn for Sb on the thermoelectric transport properties of CoSb{sub 3}-based skutterudites

Band structure calculations that incorporate impurity effects suggest that a band resonant state may be formed in p-type CoSb{sub 3}-based skutterudites by replacing Sb atoms with Sn dopant atoms. Such resonant states have the potential to greatly improve thermoelectric energy conversion efficiency by increasing the density of states variation near the Fermi level, thereby increasing the Seebeck coefficient at a given carrier concentration. Through transport measurements of the Seebeck coefficient, electrical conductivity, thermal conductivity, and Hall coefficient, we show that a practical band resonant state is not achieved by Sn doping. Compared to undoped CoSb{sub 3}, the dimensionless figure of merit (ZT) in Sn-doped CoSb{sub 3} is enhanced slightly at high temperatures to a value of 0.2, mostly due to a reduction in thermal conductivity. The Fermi level is calculated not to reach the band resonant state induced by Sn impurity atoms within the range of Sn concentrations examined here.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of stratospheric lapse rate on numerically simulated thunderstorm cloud top structure

The three-dimensional anelastic model of Schlesinger (1975, 1978, 1984) is utilized to study the effects of stratospheric stability on thunderstorm cloud top structure. Three experiments were conducted; in the first the stratosphere is assumed isothermal, in the second test there is a temperature lapse of 3 K/km, and in the third case there is a 3 K/km inversion. Time variations of vertical velocity, mature storm structure, and cloud top are examined. It is observed that the cloud summit height is lowered as stratospheric stability increases, a cloud-top thermal couplet occurs in all cases, the cold region has a U or V shape, and there is a height minimum in the warm regions.

Schlesinger, Robert E.↗

Nonlinear Large Deflection Theory with Modified Aeroelastic Lifting Line Aerodynamics for a High Aspect Ratio Flexible Wing

This paper investigates the effect of nonlinear large deflection bending on the aerodynamic performance of a high aspect ratio flexible wing. A set of nonlinear static aeroelastic equations are derived for the large bending deflection of a high aspect ratio wing structure. An analysis is conducted to compare the nonlinear bending theory with the linear bending theory. The results show that the nonlinear bending theory is length-preserving whereas the linear bending theory causes a non-physical effect of lengthening the wing structure under the no axial load condition. A modified lifting line theory is developed to compute the lift and drag coefficients of a wing structure undergoing a large bending deflection. The lift and drag coefficients are more accurately estimated by the nonlinear bending theory due to its length-preserving property. The nonlinear bending theory yields lower lift and span efficiency than the linear bending theory. A coupled aerodynamic-nonlinear finite element model is developed to implement the nonlinear bending theory for a Common Research Model (CRM) flexible wing wind tunnel model to be tested in the University of Washington Aeronautical Laboratory (UWAL). The structural stiffness of the model is designed to give about 10% wing tip deflection which is large enough that could cause the nonlinear deflection effect to become significant. The computational results show that the nonlinear bending theory yields slightly less lift than the linear bending theory for this wind tunnel model. As a result, the linear bending theory is deemed adequate for the CRM wind tunnel model.

Aeroelasticity↗

Synthesis and Structural Characterization of Novel Intermetallic Clathrates – Prospective Materials for Thermoelectric Applications

The overall objective of the project is to contribute to the development of the fundamental chemistry and physics of new intermetallic clathrates (open framework materials) that can find applications in solid-state energy conversion. Such materials are termed thermoelectric materials and they possess the unique property that a temperature gradient induces a separation of charge in them. Thermoelectric materials are of great practical importance because of their potential for widespread applications in power generation or in cooling devices. Recently, new complex inorganic materials with open framework structures, such as skutterudites and clathrates have been suggested to be a breakthrough in the thermoelectric energy conversion. The basic hypothesis for the thermoelectric properties of such “host-guest” structures is that the conducting host-framework provides a high Seebeck coefficient (S) and electrical conductivity (σ), while low-lying optical modes, associated with the vibration of the guest-atoms, hybridize with the acoustic modes. The proposed interdisciplinary efforts are the initial part of a broader, collaborative program to investigate the structure-bonding-properties relationships in related intermetallic compounds. More specifically, our work is aimed at: 1. Comprehensive and systematic investigations of the crystal chemistry and stoichiometry breadth of new semiconducting clathrates with the type-II or type-III structures. 2. Precise determination of the composition with minimum occupancy of the cages, needed for the thermodynamic stability of the clathrate framework, coupled with investigations to verify the possibility of “rattling” atoms inside the open-framework structure. 3. Extensive physical property measurements (S, σ, k, R H , C p , $\chi_{m}$). Ultimately, this new phenomenology will be used as a foundation for the rational tuning of potentially interesting properties of the newly synthesized materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic Phase and Disorder Engineering in 1T‐MoSe 2 Nanosheets for Enhanced Hydrogen‐Evolution Reaction

MoSe 2 is a promising earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER), even though it has received much less attention among the layered dichalcogenide (MX 2 ) materials than MoS 2 so far. Here, a novel hydrothermal‐synthesis strategy is presented to achieve simultaneous and synergistic modulation of crystal phase and disorder in partially crystallized 1T‐MoSe 2 nanosheets to dramatically enhance their HER catalytic activity. Careful structural characterization and defect characterization using positron annihilation lifetime spectroscopy correlated with electrochemical measurements show that the formation of the 1T phase under a large excess of the NaBH 4 reductant during synthesis can effectively improve the intrinsic activity and conductivity, and the disordered structure from a lower reaction temperature can provide abundant unsaturated defects as active sites. Such synergistic effects lead to superior HER catalytic activity with an overpotential of 152 mV versus reversible hydrogen electrode (RHE) for the electrocatalytic current density of j = −10 mA cm −2 , and a Tafel slope of 52 mV dec −1 . This work paves a new pathway for improving the catalytic activity of MoSe 2 and generally MX 2 ‐based electrocatalysts via a synergistic modulation strategy.

Yin, Ying↗

PEDOT:PSS-based Multilayer Bacterial-Composite Films for Bioelectronics

Abstract Microbial electrochemical systems provide an environmentally-friendly means of energy conversion between chemical and electrical forms, with applications in wastewater treatment, bioelectronics, and biosensing. However, a major challenge to further development, miniaturization, and deployment of bioelectronics and biosensors is the limited thickness of biofilms, necessitating large anodes to achieve sufficient signal-to-noise ratios. Here we demonstrate a method for embedding an electroactive bacterium, Shewanella oneidensis MR-1, inside a conductive three-dimensional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) matrix electropolymerized on a carbon felt substrate, which we call a multilayer conductive bacterial-composite film (MCBF). By mixing the bacteria with the PEDOT:PSS precursor in a flow-through method, we maintain over 90% viability of S. oneidensis during encapsulation. Microscopic analysis of the MCBFs reveal a tightly interleaved structure of bacteria and conductive PEDOT:PSS up to 80 µm thick. Electrochemical experiments indicate S. oneidensis in MCBFs can perform both direct and riboflavin-mediated electron transfer to PEDOT:PSS. When used in bioelectrochemical reactors, the MCBFs produce 20 times more steady-state current than native biofilms grown on unmodified carbon felt. This versatile approach to control the thickness of bacterial composite films and increase their current output has immediate applications in microbial electrochemical systems, including field-deployable environmental sensing and direct integration of microorganisms into miniaturized organic electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural evaluation of candidate designs for the large space telescope primary mirror

Structural performance analyses were conducted on two candidate designs (Itek and Perkin-Elmer designs) for the large space telescope three-meter mirror. The mirror designs and the finite-element models used in the analyses evaluation are described. The results of the structural analyses for several different types of loading are presented in tabular and graphic forms. Several additional analyses are also reported: the evaluation of a mirror design concept proposed by the Boeing Co., a study of the global effects of local cell plate deflections, and an investigation of the fracture mechanics problems likely to occur with Cervit and ULE. Flexibility matrices were obtained for the Itek and Perkin-Elmer mirrors to be used in active figure control studies. Summary, conclusions, and recommendations are included.

Soosaar, K.↗

Predicting Global Ground Geoelectric Field With Coupled Geospace and Three-Dimensional Geomagnetic Induction Models

We forecast the global effects of space weather on the geoelectric and geomagnetic fields using a novel combination of methods. We use a realistic three-dimensional (3-D) model of Earth's electrical conductivity and a realistic representation of magnetospheric and ionospheric current systems. Our scheme involves the following steps: (1) We run a global magnetohydrodynamic model of the magnetosphere coupled to an electrostatic model of the ionosphere. (2) We calculate a global time series of the ground magnetic field resulting from the ionospheric, field-aligned, and magnetospheric currents of the global magnetohydrodynamic model. (3) We approximate this external field by an equivalent source current flowing in a thin shell above Earth. (4) We calculate a global time series of geoelectric and geomagnetic fields from the equivalent current and a 3-D conductivity model of Earth that also takes into account the coast effect due to large horizontal conductivity gradient. We verify our implementation by comparing the results against known analytic and numeric solutions, and then apply our scheme to the geomagnetic storm of 14 and 15 December 2006. In particular, we show that accounting for 3-D structure of Earth's conductivity results in significantly enhanced geoelectric field at large lateral gradients of conductivity, especially in coastal regions, both at middle and high latitudes. In the studied geomagnetic storm the largest values of 3-D geoelectric field are detected at high latitudes reaching 2.5 volts per kilometer and the 3-D effect extends inland by a few hundred kilometers.

Honkonen, I.↗

Fabrication and Characterization of a Conduction Cooled Thermal Neutron Filter

Installation of a conduction cooled thermal (low-energy) neutron filter in an existing domestic test reactor would provide the U.S. the capability to test new reactor fuels and materials for advanced fast (high-energy) reactor concepts. A composite consisting of Al3Hf-Al has been proposed for the neutron filter due to both the neutron filtering properties of hafnium and the conducting capabilities of aluminum. Knowledge of the thermal conductivity of the Al3Hf-Al composite is essential for the design of the filtering system. The present objectives are to identify a suitable fabrication technique and to measure the thermophysical properties of the Al3Hf intermetallic, which has not been done previous to this study. A centrifugal casting method was used to prepare samples of Al3Hf. X-ray diffraction and Rietveld analysis were conducted to determine the structural make-up of each of the samples. Thermophysical properties were measured as follows: specific heat by a differential scanning calorimeter (DSC), thermal diffusivity by a laser flash thermal diffusivity measuring system, thermal expansion by a dilatometer, and thermal conductivity was calculated based on the previous measurements. All measurements were acquired over a temperature range of 90°C - 375°C with some measurements outside these bounds. The average thermal conductivity of the intermetallic Al3Hf (~7 at.% Hf) was found to be ~ 41 W/m-K for the given temperature range. This information fills a knowledge gap in the thermophysical properties of the intermetallic Al3Hf with the specified percentage of hafnium. A model designed to predict composite properties was used to calculate a thermal conductivity of ~177 W/m-K for an Al3Hf-Al composite with 23 vol% Al3Hf. This calculation was based upon the average thermal conductivity of Al3Hf over the specified temperature range.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V 6 O 11

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V 6 O 11 /V 7 O 13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V 6 O 11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K) –1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m) –1 , a Seebeck coefficient of α = –(35 ± 2) μV K –1 , which leads to a power factor of PF = 4.9 ± 0.8 × 10 –5 W (m K 2 ) –1 at ~600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. Here, this study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experiments and numerical simulations on high-density magnetohydrodynamic electrical power generation

We describe experiments and numerical simulations on high-density energy conversion using a compact closed-cycle magnetohydrodynamic electrical power generator, where shock-tube-based experiments and quasi-three-dimensional numerical simulations are fully coupled. The temporal plasma-fluid behavior, the one- and two-dimensional plasma-fluid structures, the enthalpy-entropy diagram, the Hall voltage-Hall current characteristics, and the quality of the energy conversion efficiency are investigated. The slightly divergent channel configuration, the application of high- and uniform-density magnetic flux to the entire generator, the high electrical conductivity, the symmetric plasma structure and stable plasma behavior, and the sufficient pressure gradient used to drive the fluid overcome the disadvantages of the generator due to its compactness, and markedly improve its energy conversion performance, namely, a power density of 0.76 GW/m{sup 3}, an isentropic efficiency of 51%, and an enthalpy extraction ratio of 17.0%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Doping effects on thermoelectric properties of the off-stoichiometric Heusler compounds Fe{sub 2−x}V{sub 1+x}Al

The thermoelectric properties of Heusler-type Fe{sub 2−x}V{sub 1+x}Al{sub 1−y}Si{sub y} and Fe{sub 2−x}V{sub 1+x−y}Ti{sub y}Al alloys have been investigated to clarify which off-stoichiometric alloy, i.e., V-rich (x > 0) or V-poor (x < 0), is more effective in enhancing the Seebeck coefficient when doped by Si and Ti, while retaining a low electrical resistivity. Large Seebeck coefficients of −182 μV/K and 110 μV/K at 300 K are obtained for n-type Fe{sub 1.95}V{sub 1.05}Al{sub 0.97}Si{sub 0.03} and p-type Fe{sub 2.04}V{sub 0.93}Ti{sub 0.03}Al, respectively. When the Seebeck coefficient is plotted as a function of valence electron concentration (VEC), the VEC dependence for the doped off-stoichiometric alloys falls on characteristic curves depending on the off-stoichiometric composition x. It is concluded that a larger Seebeck coefficient with a negative sign can be obtained for the V-rich alloys rather than the V-poor alloys, whilst good p-type materials are always derived from the V-poor alloys. Substantial enhancements in the Seebeck coefficient for the off-stoichiometric alloys could be achieved by a favorable modification in the electronic structure around the Fermi level through the antisite V or Fe defect formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geophysics Methods in Electrometric Assessment of Dams

The safety assessment of hydraulic structures is proposed to be conducted via geoelectric measurements, which are capable of assessing the health of earth dams in their natural bedding without intervention in their structure. Geoelectric measurements are shown as being capable of pinpointing hazardous parts of a dam, including areas of elevated seepage. Applications of such methods are shown for a number of mini-dams in the Sverdlovsk region. Aparameter (effective longitudinal conductivity) that may be used to monitor the safety of hydraulic structures is proposed. Quantitative estimates of this parameter are given in terms of the degree of safely.

42 ENGINEERING↗

Bi-directional porous media phase change heat exchanger

Heat exchange structure. A hydrophilic, thermally conductive porous medium includes nanostructures formed substantially uniformly throughout the porous medium providing a balance of capillary and viscous forces to self-regulate a liquid-vapor contact line. A suitable porous medium is copper. A method for making the structure is also disclosed.

42 ENGINEERING↗

Electronic structure and optical properties of α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} solid-solution thin films

We have examined the effect of V doping on the electronic and optical properties of epitaxial hematite (α-Fe{sub 2}O{sub 3}) thin films, by employing several characterization techniques and computational modeling. The conductivity of α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} (0 ≤ x ≤ ∼0.5) is enhanced by several orders of magnitude as x is increased, as evidenced by electrical resistivity measurements and x-ray photoelectron spectroscopy core-level and valence-band spectra. Optical absorption shows a reduction in the direct band gap by as much as 0.64 eV for x = 0.53 (E{sub g} = 1.46 eV) relative to that of α-Fe{sub 2}O{sub 3} (E{sub g} = 2.10 eV). Detailed understanding of the character of the optical transitions in the alloys is achieved using first-principles calculations of the ground and excited states. These calculations reveal that V doping results in occupied V 3d orbitals hybridized with Fe orbitals and located at approximately mid-gap in α-Fe{sub 2}O{sub 3}. The lowest energy transitions involve charge transfer from occupied V 3d to unoccupied Fe 3d* orbitals. With a low band gap and high conductivity, α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} is a promising material for photovoltaic and photoelectrochemical applications.

36 MATERIALS SCIENCE↗

Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes

Layered Na-based oxides with the general composition of Na x TMO 2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for the layered stacking structure, Na-ion conductivity, and the redox activity, potentially promising new avenues in functional material properties. In this work, we have explored the maximum Na content in P2-type layered oxides and discovered that the high-content Na in the host enhances the structural stability; moreover, it promotes the oxidation of low-valent cations to their high oxidation states (in this case Ni 2+ ). This can be rationalized by the increased hybridization of the O(2p)-TM(3d-e g *) states, affecting both the local TM environment as well as the interactions between the NaO 2 and TMO 2 layers. These properties are highly beneficial for the Na storage capabilities as required for cathode materials in sodium-ion batteries. It leads to excellent Na-ion mobility, a large storage capacity (>100 mAh g –1 between 2.0-4.0 V), yet preventing the detrimental sliding of the TMO 2 layers (P2–O2 structural transition), as reflected by the ultralong cycle life (3000 (dis)charge cycles demonstrated). These findings expand the horizons of high Na-content P2-type materials, providing new insights of the electronic and structural chemistry for advanced cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NEGF-DFT characterization of diarylethene photoswitches: Impact of substituents

In this presentation we report a theoretical study on the performance of diarylethene photoswitches. We start with a comparison between the electronic structures of different substituted diarylethene cores. Using a NEGF-DFT formalism we compute self-consistently transmission and IV curves with a focus on the impact of the substituents usually introduced for various synthetic and functional reasons. We find that the conductance properties of the diarylethene photoswitches are rather insensitive to these substitutions in the core. In the interpretation of our results, we make a connection between transmission spectra and molecular electronic properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗