Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Lipid accumulation-induced hepatocyte senescence regulates the activation of hepatic stellate cells through the Nrf2-antioxidant response element pathway

Highlights: • Oxidative stress caused by lipid deposition causes hepatocyte senescence. • Free fatty acid-induced senescent hepatocytes promote hepatic stellate cell activation and development of hepatic fibrosis. • Senescent hepatocytes regulate hepatic fibrosis through the Nrf2-antioxidant response element pathway. Non-alcoholic fatty liver disease (NAFLD) has become the most prevalent chronic liver disease globally. Elderly individuals are at a higher risk of developing NAFLD with severe clinical outcomes. Although NAFLD is closely related to liver aging, the role of hepatocyte senescence in the progression of NAFLD, especially in the development of fibrosis, is still unclear. The early stage of NAFLD is mainly characterized by lipid accumulation in hepatocytes, which could lead to severe oxidative stress, causing cellular senescence. In the present study, hepatocytes cultured in the presence of free fatty acids to induce lipid deposition were used as a hepatocyte senescence model in vitro. Senescent hepatocytes significantly increased the activation of co-cultured primary hepatic stellate cells (HSCs) and the expression of pro-fibrosis molecules. Moreover, the antioxidant regulator nuclear factor erythroid 2-related factor 2 (Nrf2) that was upregulated in senescent hepatocytes was found to be related to the activation of co-cultured HSCs. The Nrf2 agonist sulforaphane, which upregulated the transcriptional activity of the Nrf2-antioxidant response element (ARE) pathway, remarkably inhibited hepatocyte senescence and its activation effect on HSCs. However, the liver tissue obtained from non-alcoholic steatohepatitis (NASH) mice with Nrf2 knockdown showed decreased antioxidation and significant liver senescence and fibrosis. In conclusion, this study confirmed that lipid accumulation induces hepatocyte senescence, which leads to HSC activation and development of hepatic fibrosis. Increasing the activity of the Nrf2-ARE antioxidant pathway in senescent hepatocytes elicited the opposite effect, suggesting that targeting Nrf2 may prevent or delay the progression of aging-related liver fibrosis in NASH.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Atomic-scale Imaging of PGM-free Catalyst Active Sites by 30 keV 4D-STEM

Platinum group metal (PGM)-free catalysts have attracted a large amount of attention due to their potential for enabling low-cost, commercially viable hydrogen fuel cells and electrolyzers [1]. Degradation of cell performance remains a significant challenge, however, currently limiting implementation of devices that utilize PGM-free materials [2]. Controlling degradation in these materials requires a better understanding of the atomic structure of active sites, thought to be FeN4 structures within a graphitic carbon lattice, which would enable more accurate prediction of the associated degradation pathways. The exact structural arrangement of active sites in these materials is still debated since a range of structures have been computationally predicted and methods to directly validate these models are still needed [1,3-5].While scanning transmission electron microscopy (STEM) has provided initial glimpses into the nature of the proposed active sites, detailed evaluation of the structure of these sites is challenging since they involve defects, edges, and nitrogen dopants in the graphitic lattice, which are susceptible to beam damage [6,7]. Conventional STEM imaging and spectroscopy methods exacerbate this problem with dose-inefficiency or nonideal contrast characteristics for imaging light and heavy elements simultaneously. A method that minimizes damage while generating dose-efficient, easily-interpretable contrast for both light and heavy elements is therefore needed to facilitate imaging of sensitive active site atomic structure.Here, we demonstrate direct atomic-scale imaging of PGM-free catalyst active sites by low-voltage four-dimensional (4D)-STEM. To accomplish this, we pair a 30 keV aberration-corrected probe, which minimizes knock-on damage, with a fast pixelated detector that has optimal performance at low beam energies [8]. We show how this setup enables relatively simple center-of-mass (CoM) techniques [9,10] to produce images with an increased signal-to-noise ratio (SNR) and light-element contrast over conventional imaging modes, allowing the entire active site structure to be imaged at the atomic scale. Moreover, we show how electron ptychography [11,12] enables images with further improved characteristics to be obtained, for example by minimizing residual aberrations, which provides a more accurate structural representation. The increased understanding that these low-voltage 4D-STEM techniques will provide about the atomic structure of PGM-free active sites and their associated degradation pathways will facilitate rational design of next-generation materials, promoting development of low-cost hydrogen fuel cells, electrolyzers, and other energy conversion devices [13]. References:[1] U Martinez et al., Adv. Mater. 31 (2019), p. 1806545.[2] Y Shao et al., Adv. Mater. 31 (2019), p. 1807615.[3] J Kneebone et al., J. Phys. Chem. C 121, (2017), p.16283.[4] T Mineva et al., ACS Catal. 9 (2019), p. 9359.[5] J Li et al., Nat. Catal. 4 (2021), p. 10.[6] T Susi et al., ACS Nano 6 (2012), p. 8837.[7] P Zelenay and DJ Myers, US Department of Energy Hydrogen and Fuel Cells Program 2017 Annual Merit Review and Peer Evaluation Meeting, Washington, DC (2017).[8] H Ryll et al., J. Inst. 11 (2016), p. P04006.[9] K Müller et al., Nat. Commun. 5 (2014), p. 5653.[10] I Lazic et al., Ultramicroscopy 160 (2016), p. 265.[11] H Yang et al., Nat. Commun. 7 (2016), p. 12532.[12] Y Jiang et al., Nature 559 (2018), p. 343. [13] Research sponsored by the Hydrogen and Fuel Cell Technologies Office, Office of Energy Efficiency and Renewable Energy, US Department of Energy (DOE). Research was conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility.

Zachman, Michael↗
DOE OSTI2020

Low Temperature Activation of Methane on Metal-Oxides and Complex Interfaces: Insights from Surface Science

The abundance of inexpensive, natural gas has transformed the energy landscape, whereby revealing new possibilities for sustainable chemical technologies or impacting those that have relied on traditional fossil fuels. The primary component, methane, is underutilized and wastefully exhausted, leading to anthropogenic global warming. Historically, the manipulation of methane remained “ clavis aurea ,” an insurmountable yet rewarding challenge and thus the focus of intense research. This is primarily due to an inability to dissociate C–H bonds in methane selectively, which requires a high energy penalty and is an essential prerequisite for the direct conversion of methane into a large set of value-added products. The discovery of such processes would promise an energy gainful use of natural gas benefiting several essential chemical processes associated with C1 chemistry. This first C–H bond dissociation step of the methane molecule appears in numerous catalytic mechanisms as the rate-determining step or most essential barrier sequence for all subsequent steps that follow in the production of C–C, C–O, or C x –H y –O z bonds found in value added products. A main goal is to catalytically reduce the energy barrier for the first C–H bond dissociation to be able to achieve the activation of methane at low or moderate temperatures. As such there is great value in understanding the fundamental nature of the active sites responsible for bond breaking or formation and thus be able to facilitate better control of this chemistry, leading to the development of new technologies for fuel production and chemical conversion. Surface science studies offer enhanced perspectives for a careful manipulation of bonds over the last layer atoms of catalyst surfaces, an essential factor for the design of atomically precise catalysts and unravelling of the reaction mechanism. With the advent of new surface imaging, spectroscopy, and in situ tools, it has been possible to decipher the surface chemistry of complex materials systems and further our understanding of atomic active sites on the surfaces of metals, oxides, and carbides or metal–oxide and metal–carbide interfaces. The once considered near impossible step of C–H bond activation is now observed at low temperatures with high propensity over a collection of oxide, metal–oxide, and metal–carbide systems in a conventional or inverse configuration (oxide or carbide on metal). The enabling of C–H activation at low temperature has opened interesting possibilities for the specific production of chemicals such as methanol directly from methane, a step toward facile synthesis of liquid fuels. We highlight the most recent of these results and present the key aspects of active site configurations engineered from surface science studies which enable such a simple reactive event through careful manipulation of the last surface layer of atoms found in the catalyst structure. New concepts which help in the activation and conversion of methane are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toggling Stereochemical Activity through Interstitial Positioning of Cations between 2D V 2 O 5 Double Layers

The 5/6s 2 lone-pair electrons of p-block cations in their lower oxidation states are a versatile electronic and geometric structure motif that can underpin lattice anharmonicity and often engender electronic and structural instabilities that underpin the function of active elements in nonlinear optics, thermochromics, thermoelectrics, neuromorphic computing, and photocatalysis. In contrast to periodic solids where lone-pair-bearing cations are part of the structural framework, installing lone-pair-bearing cations in the interstitial sites of intercalation hosts provides a means of a systematically modulating electronic structure through the choice of the group and the period of the inserted cation while preserving the overall framework connectivity. The extent of stereochemical activity and the energy positioning of lone-pair-derived mid-gap states depend on the cation identity, stoichiometry, and strength of anion hybridization. V 2 O 5 polymorphs are versatile insertion hosts that can accommodate a broad range of s-, p-, and d-block cations. However, the insertion of lone-pair-bearing cations remains largely underexplored. In this article, we examine the implications of varying the 6s 2 cations situated in interlayer sites between condensed [V 4 O 10 ] n double layers. Systematic modulations of lattice distortions, electronic structure, and magnetic ordering are observed with increasing strength of stereochemical activity from group 12 to group 14 cations. We compare and contrast p-block-layered M x V 2 O 5 (M = Hg, Tl, and Pb) compounds and map the significance of local off-centering arising from the stereochemical activity of lone-pair cations to the emergence of filled antibonding lone-pair 6s 2 –O 2p-hybridized mid-gap states mediated by second-order Jahn–Teller distortions. Crystallographic studies of cation coordination environments and the resulting modulation of V–V interactions have been used in conjunction with variable-energy hard X-ray photoelectron spectroscopy measurements, first-principles electronic structure calculations, and crystal orbital Hamilton population analyses to decipher the origins of stereochemical activity. Magnetic susceptibility measurements reveal antiferromagnetic signatures for all the three compounds. However, the differences in V–V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 160 and 260 K for Hg 0.5 V 2 O 5 and δ-Tl 0.5 V 2 O 5 , respectively, as compared to 7 K for δ-Pb 0.5 V 2 O 5 . In δ-Pb 0.5 V 2 O 5 , the strong stereochemical activity of electron lone pairs and the resulting electrostatic repulsions enforce superlattice ordering, which strongly modifies the electronic localization patterns along the [V 4 O 10 ] slabs, resulting in disrupted magnetic ordering and an anomalously low ordering temperature. The results demonstrate a versatile strategy for toggling the stereochemical activity of electron lone pairs to modify the electronic structure near the Fermi level and to mediate superexchange interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ice Recrystallization Inhibition Activity of Soy Protein Hydrolysates

Identifying and developing ice recrystallization inhibitors from sustainable food proteins such as soy protein isolate (SPI) can lead to practical applications in both pharmaceutical and food industries. Here, the objective of this study was to investigate the ice recrystallization inhibition (IRI) activity of SPI hydrolysates, and this was achieved by using an IRI activity-guided fractionation approach and relating IRI activity to interfacial molecular activity measured by vibrational sum frequency generation (VSFG). In addition, the impact of molecular weight (MW) and enzyme specificity was analyzed using three different proteases (Alcalase, trypsin, and pancreatin) and varying hydrolysis times. Using preparative chromatography, hydrolysates from each enzyme treatment were fractionated into five different MW fractions (F1–F5), which were then characterized by high-performance liquid chromatography (HPLC). All SPI hydrolysates had IRI activity, resulting in a 57–29% ice crystal diameter reduction when compared to native SPI. The F1 fraction (of 4–14 kDa) was most effective among all tested hydrolysates, while the lower MW peptide fractions lacked activity. One sample (SPI-ALC 20-F1) had a 52% reduction of ice crystal size at a lower concentration of 2% compared to the typical 4% used. SFG showed a difference in H-bonding and hydrophobic interactions of the molecules on the water/air interface, which may be linked to IRI activity. This study demonstrates for the first time the ability of SPI hydrolysates to inhibit ice crystal growth and the potential application of SFG to study molecular interaction at the interface that may help illustrate the mechanism of action.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Identifying the Unique Properties of α-Bi 2 Mo 3 O 12 for the Activation of Propene

In order to understand the remarkable activity of α-Bi 2 Mo 3 O 12 for selective oxidation and ammoxidation of propene, the propene activation ability of four molybdenum-based mixed metal oxides - Bi 2 Mo 3 O 12 , PbMoO 4 , Bi 2 Pb 5 Mo 8 O 32 , and MoO 3 - was investigated using density functional theory. Propene activation is considered to occur via abstraction of a hydrogen atom from the methyl group of physisorbed propene by lattice oxygen. For each material, the apparent activation energy was estimated by summing the heat of adsorption of propene, the C-H bond dissociation energy, and the hydrogen attachment energy (HAE) for hydrogen addition to lattice oxygen; this sum provides a lower bound for the apparent activation energy. It was found that two structural features of oxide surfaces are essential to achieve low activation barriers: under-coordinated surface cation sites enable strong propene adsorption, and suitable 5- or 6-coordinate geometries at molybdenum result in favorable HAEs. The impact of molybdenum coordination on HAE was elucidated by carrying out a molecular orbital analysis using a cluster model of the molybdate unit. This effort revealed that, in 5- and 6-coordinate molybdates, oxygen donor atoms trans to molybdenyl oxo atoms destabilize the molybdate prior to H addition but stabilize the molybdate after H addition, thereby providing an HAE ~15 kcal/mol more favorable than that on 4-coordinate molybdate oxo atoms. Bi 3+ cations in Bi 2 Mo 3 O 12 thus promote catalytic activity by providing both strong adsorption sites for propene and forcing molybdate into 5-coordinate geometries that lead to particularly favorable values of the HAE. (Graph Presented).

36 MATERIALS SCIENCE↗
DOE OSTI2019

Improved Oxygen Reduction Reaction Activity of Nanostructured CoS 2 through Electrochemical Tuning

Searching for efficient Pt-free oxygen reduction reaction (ORR) electrocatalysts has been actively pursued among the current electrocatalyst research community. The family of transition-metal chalcogenides, especially cobalt disulfide (CoS 2 ), has been reported as competitive ORR catalysts. In this work, we perform a detailed analysis of the intrinsic activity in terms of onset potentials and selectivity toward hydrogen peroxide of CoS 2 in both acid and alkaline medium. Our detailed characterizations of this system via X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and calculated bulk and surface thermodynamics and ORR mechanism reveal pH-dependent electrochemical evolution of the CoS 2 surfaces. Using XPS results before and after ORR in combination with density functional theory (DFT) calculations for individual surfaces reveals sulfur to oxygen substitution, and partial dissolution occurs in acidic media, while thin cobalt oxide films supported by CoS 2 are formed in alkaline media. The comprehensive DFT calculations of the ORR activities on these systems reveal that sulfur is an unlikely ORR active site, while undercoordinated Co metal site in the CoS 2 is less active than very active undercoordinated Co metal site in the Co oxide film. Using these guiding principles, we then demonstrate that electrochemical lithium (Li) tuning of CoS 2 in organic electrolyte increases its ORR performance in both acid and alkaline medium. Detailed characterizations demonstrate that the grain size of CoS 2 particle is considerably reduced and has a much richer surface oxygen content after electrochemical Li tuning (LiET-CoS 2 ) as the direct consequence of the Li galvanostatic cycling. The general efficacy of this method toward transition-metal chalcogenides (T-M-X) is further demonstrated by enhanced ORR activities of CoS and Ni 3 S 2 in alkaline and neutral medium, respectively. This work opens up an opportunity for probing more advanced T-M-X-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Investigation of the Role of Active Site Heterogeneity for aSupported Organovanadium(III) Hydrogenation Catalyst

A crucial consideration for supported heterogeneous catalysts is the nonuniformity of the active sites, particularly for supported organometallic catalysts. Standard spectroscopic techniques, such as X-ray absorption spectroscopy, reflect the nature of the most populated sites, which are often intrinsically structurally distinct from the most active catalytic sites. Additionally, with computational models, often, only a few representative structures are used to depict catalytic active sites on a surface, even though there are numerous observable factors of surface heterogeneity that contribute to the kinetically favorable active species. A previously reported study on the mechanism of a surface organovanadium-(III) catalyst [(SiO 2 )V III (Mes)(THF)] for styrene hydrogenation yielded two possible mechanisms: heterolytic cleavage and redox cycling. These two mechanistic scenarios are challenging to differentiate experimentally since the kinetic readouts of the catalyst are identical. To showcase the importance of modeling surface heterogeneity and its effect on catalytic activity, density functional theory (DFT) computational models of a series of potential active sites of [(SiO 2 )V III (Mes)(THF)] for the reaction pathways are applied in combination with kinetic Monte Carlo (kMC) simulations. Computed results were then compared to the previously reported experimental kinetic study: (1) DFT free-energy reaction pathways indicated the likely active site and pathway for styrene hydrogenation, a heterolytic cleavage pathway requiring a bare tripodal vanadium site. (2) From the kMC simulations, a mixture of different bond lengths from the support oxygen to the metal center was required to qualitatively describe the experimentally observed kinetic aspects of a supported organovanadium(III) catalyst for olefin hydrogenation. This work underscores the importance of modeling surface heterogeneity in computational catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Activation of Lattice and Adatom Oxygen by Highly Stable Ceria-Supported Cu Single Atoms

Requiring catalysts to be both active yet stable over long periods of time under variable reaction conditions including high and low temperatures is a daunting challenge due to the almost mutual exclusivity of these constraints. Using CO oxidation as a probe reaction, in this work we demonstrate that thermally stable single atom copper catalysts prepared by high temperature synthesis (atom trapping) on ceria can achieve this feat by allowing modulation of the Cu charge state through facile charge transfer between active site and support. This provides the catalysts with an ability to activate either lattice or adatom oxygen atoms, accessing additional reaction channels depending on the reaction conditions. Such adaptability allows dynamic response of catalysts enabling them to remain active under variable reaction conditions. The inherent stability of the catalyst arises from the enhanced strength of the Cu-O interactions from high temperature synthesis that exist even when Cu oxidation state varies, which retards sintering and deactivation. As we show here, one can circumvent the dilemma of designing catalysts that are simultaneously active and stable by matching the redox properties of the active site and support and establishing an environmental adaptability around the active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Interfacial Control of Catalytic Activity in the Aldol Condensation: Combining the Effects of Hydrophobic Environments and Water

Aminopropyl-functionalized mesoporous silica nanoparticles (AP-MSN) catalyze aldol condensations. The activity of AP-MSN decreases with increasing solvent polarity due to the stabilization of ion pairs formed between acidic silanol groups and the amines, which ultimately decreases the number of catalytically active amine sites. Yet, the reaction in water is faster than expected on the basis of polarity, because water limits the formation of Schiff bases that are also responsible for blocking active sites. In this work, we combined the action of water with a low-local-polarity environment around the catalytic sites of AP-MSN to maximize active site availability and catalyst performance. We particularly demonstrate how the local polarity of AP-MSN can be controlled by modifying its surface with varying concentrations of hexyl groups and how the dielectric constant of the silica–water interface can be determined using the solvatochromic probe Prodan. The catalytic activities of hexyl-modified AP-MSN in water were inversely proportional to their interfacial dielectric constants and were significantly higher (roughly by a factor of 4) than those of AP-MSN in anhydrous solvents of comparable polarities. Producing low-local-polarity environments in aqueous AP-MSN also enhanced the sensitivity of the aldol reaction to the electronic effects of substituents in the substrate. The enhancement of catalytic activity by low interfacial polarity was also observed in other amine-catalyzed C–C bond forming reactions such as the Henry and vinylogous aldol reactions. As a whole, our results demonstrate that the catalytic activity of AP-MSN can be controlled by the synergistic action of water and a low interfacial dielectric constant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Influence of Atomic Surface Structure on the Activity of Ag for the Electrochemical Reduction of CO 2 to CO

This work was undertaken to elucidate the facet-dependent activity of Ag for the electrochemical reduction of CO 2 to CO. To this end, CO2 reduction was investigated over Ag thin films with (111), (100), and (110) orientations prepared via epitaxial growth on single-crystal Si wafers with the same crystallographic orientations. Thus, this preparation technique yielded larger area electrodes than can be achieved using single-crystals, which enabled the electrocatalytic activity of the corresponding Ag surfaces to be quantified in the Tafel regime. The Ag(110) thin films exhibited higher CO evolution activity compared to the Ag(111) and Ag(100) thin films, consistent with previous single-crystal studies. Density functional theory calculations suggest that CO 2 reduction to CO is strongly facet-dependent, and that steps are more active than highly coordinated terraces. This is the result of both a higher binding energy of the key intermediate COOH as well as an enhanced double-layer electric field stabilization over undercoordinated surface atoms located at step edge defects. As a consequence, step edge defects likely dominate the CO 2 reduction activity observed over the Ag(111) and Ag(100) thin films. The higher activity observed over the Ag(110) thin film is then related to the larger density of undercoordinated sites compared to the Ag(111) and Ag(100) thin films. Our conclusion that undercoordinated sites dominate the CO 2 reduction activity observed over close-packed surfaces highlights the need to consider the contribution of such defects in studies of single-crystal electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Controlling the Activity and Stability of Electrochemical Interfaces Using Atom-by-Atom Metal Substitution of Redox Species

Understanding the molecular-level properties of electrochemically active ions at operating electrode–electrolyte interfaces (EEI) is key to the rational development of high-performance nanostructured surfaces for applications in energy technology. An electrochemical cell coupled with ion soft landing is employed to examine the effect of “atom-by-atom” metal substitution on the activity and stability of well-defined redox-active anions, PMo x W 12–x O 40 3– (x = 0, 1, 2, 3, 6, 9, or 12) at nanostructured ionic liquid EEI. A striking observation made by in situ electrochemical measurements and further supported by theoretical calculations is that the substitution of only one to three tungsten atoms by molybdenum atoms in the PW 12 O 40 3– anions results in a substantial spike in their first reduction potential. Specifically, PMo 3 W 9 O 40 3– showed the highest redox activity in both in situ electrochemical measurements and as part of a functional redox supercapacitor device, making it a “super-active redox anion” compared with all other PMo x W 12–x O 40 3– species. Electronic structure calculations showed that metal substitution in PMo x W 12–x O 40 3– causes the lowest unoccupied molecular orbital (LUMO) to protrude locally, making it the “active site” for reduction of the anion. Several critical factors contribute to the observed trend in redox activity including (i) multiple isomeric structures populated at room temperature, which affect the experimentally determined reduction potential; (ii) substantial decrease of the LUMO energy upon replacement of W atoms with more-electronegative Mo atoms; and (iii) structural relaxation of the reduced species produced after the first reduction step. Our results illustrate a path to achieving superior performance of technologically relevant EEIs in functional nanoscale devices through understanding of the molecular-level electronic properties of specific electroactive species with “atom-by-atom” precision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Bipyridine- and phenanthroline-based metal-organic frameworks for highly efficient and tandem catalytic organic transformations via directed C-H activation

We report here the synthesis of a series of robust and porous bipyridyl- and phenanthryl-based metal–organic frameworks (MOFs) of UiO topology (BPV-MOF, mBPV-MOF, and mPT-MOF) and their postsynthetic metalation to afford highly active single-site solid catalysts. While BPV-MOF was constructed from only bipyridyl-functionalized dicarboxylate linker, both mBPV- and mPT-MOF were built with a mixture of bipyridyl- or phenanthryl-functionalized and unfunctionalized dicarboxylate linkers. The postsynthetic metalation of these MOFs with [Ir(COD)(OMe)] 2 provided Ir-functionalized MOFs (BPV-MOF-Ir, mBPV-MOF-Ir, and mPT-MOF-Ir), which are highly active catalysts for tandem hydrosilylation of aryl ketones and aldehydes followed by dehydrogenative ortho-silylation of benzylicsilyl ethers as well as C–H borylation of arenes using B₂pin₂. Both mBPV-MOF-Ir and mPT-MOF-Ir catalysts displayed superior activities compared to BPV-MOF-Ir due to the presence of larger open channels in the mixed-linker MOFs. Impressively, mBPV-MOF-Ir exhibited high TONs of up to 17000 for C–H borylation reactions and was recycled more than 15 times. The mPT-MOF-Ir system is also active in catalyzing tandem dehydrosilylation/dehydrogenative cyclization of N-methylbenzyl amines to azasilolanes in the absence of a hydrogen acceptor. Importantly, MOF-Ir catalysts are significantly more active (up to 95 times) and stable than their homogeneous counterparts for all three reactions, strongly supporting the beneficial effects of active site isolation within MOFs. This work illustrates the ability to increase MOF open channel sizes by using the mixed linker approach and shows the enormous potential of developing highly active and robust single-site solid catalysts based on MOFs containing nitrogen-donor ligands for important organic transformations.

Manna, Kuntal↗
DOE OSTI2023

Dynamic Evolution of Palladium Single Atoms on Anatase Titania Support Determines the Reverse Water–Gas Shift Activity

Research interest in single-atom catalysts (SACs) has been continuously rising. However, the lack of understanding of the dynamic behaviors of SACs during applications hinder catalyst development and mechanistic understanding. Herein, we report on the evolution of active sites over Pd/TiO 2 -anatase SAC (Pd 1 /TiO 2 ) in the reverse water-gas shift (rWGS) reaction. Combining kinetics, in-situ characterization, and theory, we show that at T ≥ 350 °C, the reduction of TiO 2 by H 2 alters the coordination environment of Pd, creating Pd sites with partially cleaved Pd-O interfacial bonds and a unique electronic structure that exhibit high intrinsic rWGS activity through the carboxyl pathway. The activation by H 2 is accompanied by the partial sintering of single Pd atoms (Pd 1 ) into disordered, flat, ~1 nm diameter clusters (Pd n ). The highly active Pd sites in the new coordination environment under H 2 are eliminated by oxidation, which, when performed at high temperature, also re-disperses Pd n and facilitates the reduction of TiO 2 . In contrast, Pd 1 sinters into crystalline, ~5 nm particles (Pd NP ) during CO treatment, deactivating Pd 1 /TiO 2 . During the rWGS reaction, the two Pd evolution pathways co-exist. The activation by H 2 dominates, leading to the increasing rate with time-on-stream, and steady-state Pd active sites similar with the ones formed under H 2 . Finally, this work demonstrates how the coordination environment and nuclearity of metal sites on a SAC evolve during catalysis and pre-treatments, and how their activity is modulated by these behaviors. These insights on SAC dynamics and structure-function relationship are valuable to mechanistic understanding and catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Uncovering the True Active Sites in Ni–N–C Catalysts for CO 2 Electroreduction

Understanding and designing active sites in single-atom catalysts (SACs) requires going beyond static models to capture their dynamic evolution under realistic electrochemical conditions. Here, in this work, we develop an integrated theoretical framework that accounts for operational conditions, by combining grand canonical density functional theory (GC-DFT) with machine-learning-accelerated sampling, to uncover structure–activity–stability relationships in Ni–N–C SACs for the CO 2 reduction reaction (CO 2 RR). A library of NiN x C 4–x (x = 0–4) motifs─representing coordination defects likely formed during high-temperature synthesis─was systematically evaluated. Under working conditions, these sites were found to undergo hydrogenation, and NiN 3 C 1_ H 1 was identified as the most probable active site. At reducing potentials, hydrogen adsorbs spontaneously at C–Ni bridge sites rather than Ni top sites, while subsurface hydrogen facilitates bent CO 2 adsorption crucial for activation. High CO 2 RR selectivity toward CO arises from site separation: Ni centers drive CO2RR, while the hydrogen evolution reaction (HER) occurs at the C–Ni bridge or N sites and from thermodynamic suppression of HER at moderate hydrogen coverage. At more negative potentials, a shift in the CO 2 RR rate-determining process (RDP) and Ni out-of-surface displacement induced by coadsorption of H and H 2 O jointly reduce activity and selectivity. Thus, both the high CO2RR selectivity of Ni–N–C catalysts and its reversal with more negative potentials can be rationalized by accounting for hydrogenated surfaces. This highlights the necessity of modeling realistic; in situ conditions. This framework provides generalizable insights into the dynamic behavior of active sites in SACs, offering guidance for the rational design of active and robust catalysts for a wide range of electrochemical reactions.

25 ENERGY STORAGE↗
DOE OSTI2026

From Oxo to Oxyl to Biradical: Systematic Multireference Calculations of Methane Activation at MOF Nodes

Methane C–H activation at transition-metal sites often involves electronic structures that challenge conventional single-reference electronic structure descriptions. Although Kohn–Sham density functional theory (DFT) is widely used to study catalytic trends, its reliability for reactions involving strongly correlated species remains uncertain. Here we present a systematic multireference investigation of methane activation at metal–organic framework (MOF) node catalysts across the 3d transition-metal series. We introduce an automated workflow for active space selection to enable consistent application of multireference methods, including multiconfiguration pair-density functional theory and n-electron valence state perturbation theory, to these catalytic systems. These calculations show substantial static correlation in the C–H activation reaction step and predict activation barriers that differ from DFT by 30–70 kJ mol–1, with DFT often qualitatively disagreeing in barrier height trends across transition metals. Analysis of multireference wave functions shows that reactivity is governed by the electronic structure of the M–O moiety along a continuum from metal–oxo to oxyl radical and O biradical character. Increased oxygen-centered spin density and weakened M–O bonding are identified as descriptors of catalytic activity which correlate with lower activation barriers.

Wardzala, Jacob↗
DOE OSTI2019

Dynamic Reorganization and Confinement of Ti IV Active Sites Controls Olefin Epoxidation Catalysis on Two-Dimensional Zeotypes

The effect of dynamic reorganization and confinement of isolated Ti IV catalytic centers supported on silicates is investigated for olefin epoxidation. Active sites consist of grafted single-site calix[4]arene–Ti IV centers or their calcined counterparts. Their location is synthetically controlled to be either unconfined at terminal T-atom positions (denoted as type-(i)) or within confining 12-MR pockets (denoted as type-(ii); diameter ~7 Å, volume ~185 Å 3 ) composed of hemispherical cavities on the external surface of zeotypes with *-SVY topology. Electronic structure calculations (density functional theory) indicate that active sites consist of cooperative assemblies of TiIV centers and silanols. When active sites are located at unconfined type-(i) environments, the rate constants for cyclohexene epoxidation (323 K, 0.05 mM TiIV, 160 mM cyclohexene, 24 mM tert-butyl hydroperoxide) are 9 ± 2 M –2 s –1 ; whereas within confining type-(ii) 12-MR pockets, there is a ~5-fold enhancement to 48 ± 8 M –2 s –1 . When a mixture of both environments is initially present in the catalyst resting state, the rate constants reflect confining environments exclusively (40 ± 11 M–2 s–1), indicating that dynamic reorganization processes lead to the preferential location of active sites within 12-MR pockets. While activation enthalpies are ΔH ‡ app = 43 ± 1 kJ mol–1 irrespective of active site location, confining environments exhibit diminished entropic barriers (ΔS ‡ app = -68 J mol –1 K –1 for unconfined type-(i) vs -56 J mol –1 K –1 for confining type-(ii)), indicating that confinement leads to more facile association of reactants at active sites to form transition state structures (volume ~ 225 Å 3 ). These results open new opportunities for controlling reactivity on surfaces through partial confinement on shallow external-surface pockets, which are accessible to molecules that are too bulky to benefit from traditional confinement within micropores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Origin of High Activity and Durability of Twisty Nanowire Alloy Catalysts under Oxygen Reduction and Fuel Cell Operating Conditions

The ability to control the surface composition and morphology of alloy catalysts is critical for achieving high activity and durability of catalysts for oxygen reduction reaction (ORR) and fuel cells. Here, this report describes an efficient surfactant-free synthesis route for producing a twisty nanowire (TNW) shaped platinum–iron (PtFe) alloy catalyst (denoted as PtFe TNWs) with controllable bimetallic compositions. PtFe TNWs with an optimal initial composition of ~24% Pt are shown to exhibit the highest mass activity (3.4 A/mg Pt , ~20 times higher than that of commercial Pt catalyst) and the highest durability (<2% loss of activity after 40000 cycles and <30% loss after 120000 cycles) among all PtFe-based nanocatalysts under ORR or fuel cell operating conditions reported so far. Using ex situ and in situ synchrotron X-ray diffraction coupled with atomic pair distribution function (PDF) analysis and 3D modeling, the PtFe TNWs are shown to exhibit mixed face-centered cubic (fcc)-body-centered cubic (bcc) alloy structure and a significant lattice strain. A striking finding is that the activity strongly depends on the composition of the as-synthesized catalysts and this dependence remains unchanged despite the evolution of the composition of the different catalysts and their lattice constants under ORR or fuel cell operating conditions. Notably, dealloying under fuel cell operating condition starts at phase-segregated domain sites leading to a final fcc alloy structure with subtle differences in surface morphology. Due to a subsequent realloying and the morphology of TNWs, the surface lattice strain observed with the as-synthesized catalysts is largely preserved. This strain and the particular facets exhibited by the TNWs are believed to be responsible for the observed activity and durability enhancements. These findings provide new insights into the correlation between the structure, activity, and durability of nanoalloy catalysts and are expected to energize the ongoing effort to develop highly active and durable low-Pt-content nanowire catalysts by controlling their alloy structure and morphology.

25 ENERGY STORAGE↗