Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vacancies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ion-Assisted Ligand Exchange for Efficient and Stable Inverted FAPbI 3 Quantum Dot Solar Cells

Perovskite quantum dot (QD) has emerged as a promising material for photovoltaics with its superior stability compared to their three-dimensional bulk counterparts, owing to its thermodynamically stabilized photoactive phase. However, ligand management on perovskite QD surfaces is extremely difficult due to the ionic nature of the perovskite lattice, which often leads to either incomplete removal of the native insulating ligands or formation of trap states during the ligand-exchange process, greatly hampering the photovoltaic performances. In this work, we report an ion-assisted ligand-exchange method for FAPbI 3 QDs using AOAc (A = formamidinium (FA + ), guanidinium (GA + ), and phenethylammonium (PEA + ), OAc = acetate), with the A + and OAC - ions promoting the removal of native long-chain insulating ligands. Further, the more complete ligand exchange results in dense and well-oriented packing of QDs, together with the enhancement of electronic coupling and charge transport across QDs. In addition, the A + and OAC - ions can fill the surface A-/X-site vacancies, respectively, reducing the QD surface trap state density and hence suppressing charge recombination and iodide migration. The p-i-n inverted QD solar cells fabricated with this ligand-exchange method exhibit significant enhancement in shortcircuit current density (J SC ), reaching a PCE of 10.13%. Moreover, unencapsulated devices show impressive stabilities of more than 7300 h (10 months) storage time in a N 2 -filled glovebox.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemical Evolution of Fuel Cell Platinum Nanocatalysts on Carbon Nanotubes at the Atomic Scale

The evolution of Pt nanoparticles supported on carbon nanotubes is analyzed before and after electrochemical potential cycling, using identical location aberration-corrected transmission electron microscopy, for applications in proton exchange membrane fuel cells. The work is focused on the half-cell accelerated stress test protocol of potential cycles ranging between 1.0 and 1.5 V RHE to represent the start-up/shutdown settings of a fuel cell vehicle. The research work reveals that particle migration and coalescence are key mechanisms for a reduction in the Pt nanoparticle surface area at the early stages of potential cycling. Further, the mechanism for particle movement and coalescence is attributed to carbon corrosion, catalyzed either by Pt or by bulk corrosion of the carbon nanotubes. Carbon corrosion results in the appearance of carbon vacancies at the carbon nanotube/Pt nanoparticle interface during cycling, as well as the formation of edge and surface defects. During cycling, the concentration of the dissoluble Pt increases. As soon as a significant amount is reached, subnanometer/atomic clusters emerge on the carbon nanotube support, which can move and coalesce, or redeposit on the surface of larger particles through Ostwald ripening.

25 ENERGY STORAGE↗
DOE OSTI2024

First-Principles Study on the Role of Cu and Cl-Based Dopants in NiO

Utilization of wide band gap oxide-based materials in thin-film solar energy technologies has increased in recent years. Among the numerous candidate oxide materials, NiO has shown many desirable optoelectronic properties that are applicable to thin-film PV technologies such as cadmium telluride PV. However, one critical factor requiring further investigation is the p-type doping behavior of NiO, specifically when the cadmium telluride solar cell undergoes conventional processes such as copper doping and chlorine-based activation treatment. The previous literature has shown a large degree of variability in hole concentrations in NiO when copper is used as the primary dopant. This study uses first-principles computational modeling based on density functional theory coupled with defect equilibria calculations to quantitatively explore the role of copper and chlorine-based extrinsic dopants in the p-type doping activity of NiO. The study reveals the importance of extrinsic dopants and their binding interactions with nickel vacancies to effectively p-dope NiO. It is suggested that both the formation of V Ni + Cu Ni and V Ni + Cl O defect pairs under a supersaturated state of NiO are potential mechanisms for increasing hole densities. On the other hand, the production of 2Cu Ni severely limits the effectiveness of p-doping in NiO, even in the presence of the aforementioned defect pairs. Furthermore, the study provides a guideline for experimentalists interested in using copper or chlorine species to understand how to controllably p-dope NiO during thin-film synthesis.

chlorine↗
DOE OSTI2025

Influence of Surface Defects on WO 3 Photoelectrodes for Catalyzing Chloride Oxidation in Water

Tungsten oxide (WO 3 ) is an n-type semiconductor due to oxygen vacancies (□ O •• in Kroger-Vink notation) or surface protonation as H x WO 3 . It is one of the few acid-stable oxides under large positive bias, which makes WO 3 ideal for interrogating the mechanism of the chloride oxidation reaction (COR). The large, positive valence band edge of ∼3 eV provides the overpotential necessary to carry out the COR, but the reaction competes with the oxygen-evolution reaction in water. The □ O •• defect density can be controlled by the atmosphere under which the material is annealed, so WO 3 films were prepared by a spin-coating method from an ammonium metatungstate precursor annealed at 500 °C under air, flowing O 2 , and flowing argon. Annealing the films in a flowing O 2 atmosphere hinders the formation of □ O ••, and annealing in Ar leads to greater surface W 6+ , likely due to expelling intercalated H + . The saturated photocurrent density (j ph ) is highest in films with the greatest concentration of W 5+ and greatest concentration of oxide defects: (0.66 mA/cm 2 annealed in air, 0.58 mA/cm 2 annealed in Ar, and 0.49 mA/cm 2 annealed in O 2 , reported at 1.5 V vs Ag/AgCl, pH 3 (before the onset of a dark reaction). The defect concentrations are determined by X-ray photoelectron spectroscopy. In all cases the Faradaic efficiency for the COR is near unity. Finally, we demonstrate that W 5d states can be probed by ligand K-edge X-ray absorption near-edge spectroscopy via pre-edge (Cl 1s → W 5d) transitions, lower in energy than the ligand-centered (Cl 1s → 4p) transition. We use this analysis to show the presence of W─Cl covalent bonds on the WO 3 films post-COR, corroborated by DFT calculations. Furthermore, this result stands in contrast to the commonly assumed mechanistic proposal invoking outer-sphere electron transfer to a physisorbed chloride ion.

Cl K-edge↗
DOE OSTI2026

Machine-Learning-Driven Discovery of Water Splitting BaFe 2 O 4 and Human-in-the-Loop Improvement via Al-Substitution for Increased Thermal Stability

Thermochemical hydrogen (TCH) production offers a promising method for converting thermal energy into hydrogen fuel through heat-driven redox cycles of metal oxides. Here, in this work a defect graph neural network (dGNN) was used to predict oxygen vacancy formation energies ΔH V O combined with Materials Project predictions of oxygen chemical potential stability to screen candidate oxides via high-throughput database analysis. BaFe 2 O 4 was identified as a promising material for experimental validation based on its predicted ΔH V O , oxygen chemical potential stability range, and potential for tunable substitutions to improve thermal properties. Experimental validation using thermogravimetric analysis (TGA), stagnation flow reactor (SFR), X-ray diffraction (XRD), and electron microscopy confirmed positive water-splitting behavior but also revealed limitations in thermal stability under aggressive reduction conditions. To address this, a human-in-the-loop modification strategy was employed introducing Al substitution in BaFe 2–x Al x O 4 ; this modification improves thermal stability, alters the crystal structure and enhances overall performance. These results demonstrate a combined computational and experimental workflow in which machine learning accelerates identification of promising candidates, while targeted experimental design enables optimization of functional performance. This approach advances the development of robust, cost-effective TCH materials and highlights the importance of integrating data-driven discovery with human-guided materials design in paving the way for scalable hydrogen production technologies.

organic↗
DOE OSTI2025

Resistive Switching of Spinel Li 4 Ti 5 O 12 Lithium-Ion Battery Material for Neuromorphic Computing

The rapid rise of AI has exposed significant limitations in conventional Von Neumann computing architecture, particularly in regard to speed and energy efficiency. To address these challenges, researchers are exploring a brain-inspired neuromorphic architecture that mimics biological neural networks, enabling massive parallel processing with reduced power consumption for complex AI computational demands. Recent interest has focused on utilizing battery electrodes and solid electrolyte materials for their resistive switching properties in developing a neuromorphic architecture. These properties are precisely tuned through local- and bulk-level chemical composition modifications via voltage bias stimuli. In this study, we demonstrate fabricating a three-terminal lithium-ion electrochemical transistor based on lithium titanium oxide (Li 4 Ti 5 O 12 ), a popular lithium-ion battery anode material. We deposited and characterized LTO thin films using RF sputtering, demonstrating a 6 orders of magnitude increase in electronic conductivity upon lithiation, with conductivity plateauing after 20% lithiation. Density functional theory calculations revealed transformation from the insulating to conducting state, supported by experimental characterization through X-Ray Photoelectron Spectroscopy (XPS) and Direct Current (DC) polarization analyses. The fabricated transistor consisted of LTO as the channel layer, gold as source/drain terminals, lithium phosphorus oxynitride (LiPON) as the lithium-ion conductor, and copper as the gate terminal. The device exhibited clear hysteresis in transfer characteristics due to lithium insertion/extraction processes. Long-term potentiation (LTP) and long-term depression (LTD) measurements showed an asymmetric ratio of 1.425 and maximum/minimum conductance ratio of 7.83. When implemented in a deep neural network (DNN) for MNIST handwritten digit recognition, the device achieved 92.03% accuracy over 20 training epochs. Detailed transport mechanism analysis revealed the crucial role of oxygen vacancies and interface effects in device operation. Our preliminary findings establish LTO-based lithium-ion electrochemical transistors as promising candidates for energy-efficient neuromorphic computing applications, offering potential solutions to traditional Von Neumann architecture limitations.

25 ENERGY STORAGE↗
DOE OSTI2020

CeTi 2 O 6 —A Promising Oxide for Solar Thermochemical Hydrogen Production

A large entropy of reduction is crucial in achieving materials capable of high-efficiency solar thermochemical hydrogen (STCH) production through two-step thermochemical water splitting cycles. We have recently demonstrated that the onsite electronic entropy of reduction attains an extreme value of 4.26 kB at 1500 K in Ce 4+ → Ce 3+ redox reactions, which explains the high performance and uniqueness of CeO 2 as an archetypal STCH material. However, ceria requires high temperatures (T > 1500 °C) to achieve a reasonable reduction extent because of its large reduction enthalpy, which is a major obstacle in practical applications. Therefore, new materials with a large entropy of reduction and lower reduction enthalpy are required. Here, we perform a systematic screening to search for Ce 4+ -based oxides which possess thermodynamics superior to CeO 2 for STCH production. We first search the Inorganic Crystal Structure Database (ICSD) and literature for Ce 4+ -based oxides and subsequently use density functional theory to compute their reduction enthalpies (i.e., oxygen vacancy formation energies). Here, we find that CeTi 2 O 6 with the brannerite structure is the most promising candidate for STCH because it possesses three essential characteristics of an STCH material: (i) a smaller reduction enthalpy compared to ceria yet large enough to split water, (ii) a high thermal stability, as reported experimentally, and (iii) a large entropy of reduction associated with Ce 4+ → Ce 3+ redox. Our proposed design strategy suggests that further exploration of Ce 4+ oxides for STCH production is warranted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exchange of Ions across the TiN/TaO x Interface during Electroformation of TaO x -Based Resistive Switching Devices

The valence change model describes the resistive switching in metal oxide-based devices as due to electroreduction of the oxide and subsequent electromigration of oxygen vacancies. Here, we present cross-sectional X-ray energy-dispersive spectroscopy elemental maps of Ta, O, N, and Ti in electroformed TiN/TaO 2.0 /TiN structures. O, N, and Ti were exchanged between the anode and the functional oxide in devices formed at high power (~1 mW), but the exchange was below the detection limit at low power (<0.5 mW). All structures exhibit a similar Ta-enriched and O-depleted filament formed by the elemental segregation in the functional oxide by the temperature gradient. The elemental interchange is interpreted as due to Fick’s diffusion caused by high temperatures in the gap of the filament and is not an essential part of electroformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-Resolution Three-Dimensional Sculpting of Two-Dimensional Graphene Oxide by E-Beam Direct Write

On demand switchable additive/subtractive patterning of 2D nanomaterials is an essential capability for developing new concepts of functional nanomaterials and their device realizations. Traditionally, this is performed via a multi-step process using photoresist coating and patterning by conventional photo or electron beam lithography, which is followed by bulk dry/wet etch or deposition. This limits the range of functionalities and structural topologies that can be achieved, as well as increases the complexity, cost, and possibility of contamination which are significant barriers to device fabrication from highly sensitive 2D materials. Focused electron beam induced processing (FEBIP) enables a material chemistry/site-specific, high-resolution multi-mode atomic scale processing and provides unprecedented opportunities for direct-write, single-step surface patterning of 2D nanomaterials with an in-situ imaging capability. It allows for realizing a rapid multi-scale/multi-mode approach, ranging from an atomic scale manipulation (e.g., via targeted defect introduction as an active site) to a large-area surface modification on nano and micro scales, including patterned doping and material removal/deposition with 2D (in-plane)/3D (out-of-plane) control. In this work, we report on a new capability of FEBIP for nanoscale patterning of graphene oxide via removal of oxygenated carbon moieties with no use of reactive gas required for etching complemented by carbon atom deposition using focused electron beam. The mechanism of experimentally observed phenomena is explored using the density functional theory (DFT) calculations, revealing that interactions of e-beam liberated reactive oxygen radicals with carbon atoms on graphene basal plane lead to creation of atomic vacancies in the material. The reaction by-products are volatile carbon di-oxides, which are dissociated and volatilized from the graphene oxide surface functional groups by interactions with an energetic focused electron beam. Along with selective “subtractive” patterning of graphene oxide, the same electron beam with increased irradiation doses can deposit out-of-plane 3D carbon nanostructures on top of or around the 2D etched pattern, thus forming a hybrid 2D/3D nanocomposite with feature control down to a few nanometers. Furthermore, this in-operando dual nanofabrication capability of FEBIP is unmatched by any other nanopatterning techniques and opens a new design window for forming 2D/3D complex nanostructures and functional nanodevices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Band-edge Engineering to Eliminate Radiation-Induced Defect States in Perovskite Scintillators

Under radiative environments such as extended hard X- or γ-rays, degradation of scintillation performance is often due to irradiation-induced defects. To overcome the effect of deleterious defects, novel design mitigation strategies are needed to identify and design more resilient materials. The potential for band-edge engineering to eliminate the effect of radiation-induced defect states in rare-earth-doped perovskite scintillators is explored, taking Ce 3+ -doped LuAlO 3 as a model material system, using density functional theory (DFT)-based DFT + U and hybrid Heyd–Scuseria–Ernzerhof (HSE) calculations. Furthermore, from spin-polarized hybrid HSE calculations, the Ce 3+ activator ground-state 4f position is determined to be 2.81 eV above the valence band maximum in LuAlO 3 . Except for the oxygen vacancies which have a deep level inside the band gap, all other radiation-induced defects in LuAlO 3 have shallow defect states or are outside the band gap, that is, relatively far away from either the 5d 1 or the 4f Ce 3+ levels. Finally, we examine the role of Ga doping at the Al site and found that LuGaO 3 has a band gap that is more than 2 eV smaller than that of LuAlO 3 . Specifically, the lowered conduction band edge envelopes the defect gap states, eliminating their potential impact on scintillation performance and providing direct theoretical evidence for how band-edge engineering could be applied to rare-earth-doped perovskite scintillators.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unusual Role of Point Defects in Perovskite Nickelate Electrocatalysts

Low-cost transition-metal oxide is regarded as a promising electrocatalyst family for an oxygen evolution reaction (OER). The classic design principle for an oxide electrocatalyst believes that point defect engineering, such as oxygen vacancies (VO .. ) or heteroatom doping, offers the opportunities to manipulate the electronic structure of material toward optimal OER activity. Oppositely, in this work, we discover a counterintuitive phenomenon that both VO .. and an aliovalent dopant (i.e., proton (H + )) in perovskite nickelate (i.e., NdNiO 3 (NNO)) have a considerably detrimental effect on intrinsic OER performance. Detailed characterizations unveil that the introduction of these point defects leads to a decrease in the oxidative state of Ni and weakens Ni-O orbital hybridization, which triggers the local electron-electron correlation and a more insulating state. Evidenced by first-principles calculation using the density functional theory (DFT) method, the OER on nickelate electrocatalysts follows the lattice oxygen mechanism (LOM). The incorporation of point defect increases the energy barrier of transformation from OO*(V O ) to OH*(V O ) intermediates, which is regarded as the rate-determining step (RDS). Furthermore, this work offers a new and significant perspective of the role that lattice defects play in the OER process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heteroatom-Doped Graphenes as Actively Interacting 2D Encapsulation Media for Mg-Based Hydrogen Storage

Nanoencapsulation using graphene derivatives enables the facile fabrication of two-dimensional (2D) nanocomposites with unique microstructures and has been generally applied to many fields of energy materials. Particularly, metal hydrides such as MgH 2 encapsulated by graphene derivatives have emerged as a promising hybrid material for overcoming the disadvantageous properties of Mg-based hydrogen storage. Although the behavior of the graphene–Mg nanoencapsulation interface has been studied for many composite materials, the direct modification of graphene with nonmetal foreign elements for changing the interfacial behavior has been limitedly reported. In this regard, using B-doped graphene and N-doped graphene as nanoencapsulation media for tuning the interfacial behavior of graphene derivative–Mg nanoparticles, we present altered hydrogen storage kinetics of heteroatom-doped (B and N) graphene–Mg composites. The effect of heteroatom doping is studied in terms of bonding configurations and heteroatom doping concentrations. The enhancement in hydrogen uptake was observed for all of the heteroatom-doped graphene–Mg nanocomposites. On the other hand, a few samples exhibit significantly low activation energy at the early stage of desorption, which can be related to the facilitated nucleus formation. Density functional theory calculation indicates that B-doping and N-doping accelerate hydrogen absorption kinetics in different ways, aiding charge transfer and inducing surface deformation of Mg nanoparticles, respectively. Their effects can be augmented in the presence of structural defects on graphene, such as vacancies, pores, or graphene edges. These results demonstrate that hydrogen storage kinetics of Mg-based systems can be altered by utilizing heteroatom-doped graphene oxide derivatives as 2D nanoencapsulation media, suggesting that the addition of a nonmetal doping element can also be applied to Mg-based hydrogen storage by modifying the nanoencapsulation interface without forming Mg alloy phases.

08 HYDROGEN↗
DOE OSTI2022

Metal Halide Perovskites Demonstrate Radiation Hardness and Defect Healing in Vacuum

Herein, we subject formamidinium lead iodide films to oxygen-containing gases (flowing O 2 or free diffusion of lab atmosphere), inert gases (flowing He, Ar, or N 2 ), and vacuum. Our films are irradiated by Cu Ka X-rays and held at 75 °C while X-ray diffraction is recorded. Under all gas conditions, we observe a reproducible 1.1 ± 0.5 A 3 perovskite lattice contraction from an initial unit cell volume of 256.5 ± 0.8 A 3 concurrent with continuous perovskite loss and lead iodide growth. Oxygen-containing gases increase the reaction rates without materially altering perovskite structural changes. Under the same temperature and irradiation conditions in vacuo, a self-healing reaction is observed, exhibited by a reproducible (0.9 ± 0.3 A 3 ) lattice expansion and stabilization of the perovskite. Furthermore, interactions between the perovskite, defects, and minority phases are simulated by generalized gradient approximation Perdew-Burke-Ernzerhof (GGA-PBE) density functional theory. Lattice contraction indicates an increase in the concentration of Schottky defects-pairs of formamidinium and iodine vacancies. Under irradiation in every atmospheric condition, a solid solution of Schottky defects with a concentration of several percent diffuses and precipitates forming lead iodide and consuming the defects. In the presence of ionized gases, this framework is modified to include the continual loss of formamidinium and iodine ions from the perovskite forming Schottky defects.

14 SOLAR ENERGY↗
DOE OSTI2022

Interfacial Unit-Dependent Catalytic Activity for CO Oxidation over Cerium Oxysulfate Cluster Assemblies

Atomically precise cerium oxo clusters offer a platform to investigate structure–property relationships that are much more complex in the ill-defined bulk material cerium dioxide. We investigated the activity of the MCe 70 torus family (M = Cd, Ce, Co, Cu, Fe, Ni, and Zn), a family of discrete oxysulfate-based Ce 70 rings linked by monomeric cation units, for CO oxidation. CuCe 70 emerged as the best performing MCe 70 catalyst among those tested, prompting our exploration of the role of the interfacial unit on catalytic activity. Temperature-programmed reduction (TPR) studies of the catalysts indicated a lower temperature reduction in CuCe 70 as compared to CeCe 70 . In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) indicated that CuCe 70 exhibited a faster formation of Ce 3+ and contained CO bridging sites absent in CeCe 70 . Isothermal CO adsorption measurements demonstrated a greater uptake of CO by CuCe 70 as compared to CeCe 70 . The calculated energies for the formation of a single oxygen defect in the structure significantly decreased with the presence of Cu at the linkage site as opposed to Ce. Furthermore, this study revealed that atomic-level changes in the interfacial unit can change the reducibility, CO binding/uptake, and oxygen vacancy defect formation energetics in the MCe 70 family to thus tune their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlative Nanoscale Imaging of Strained hBN Spin Defects

Spin defects like the negatively charged boron vacancy color center (V B - ) in hexagonal boron nitride (hBN) may enable new forms of quantum sensing with near-surface defects in layered van der Waals heterostructures. Here, the effect of strain on V B - color centers in hBN is revealed with correlative cathodoluminescence and photoluminescence microscopies. Strong localized enhancement and redshifting of the V B - luminescence is observed at creases, consistent with density functional theory calculations showing V B - migration toward regions with moderate uniaxial compressive strain. The ability to manipulate spin defects with highly localized strain is critical to the development of practical 2D quantum devices and quantum sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unlocking the Potential of A-Site Ca-Doped LaCo 0.2 Fe 0.8 O 3-δ : A Redox-Stable Cathode Material Enabling High Current Density in Direct CO 2 Electrolysis

Massive carbon dioxide (CO 2 ) emission from recent human industrialization has affected the global ecosystem and raised great concern for environmental sustainability. The solid oxide electrolysis cell (SOEC) is a promising energy conversion device capable of efficiently converting CO 2 into valuable chemicals using renewable energy sources. However, Sr-containing cathode materials face the challenge of Sr carbonation during CO 2 electrolysis, which greatly affects the energy conversion efficiency and long-term stability. Thus, A-site Ca-doped La1– x CaxCo 0.2 Fe 0.8 O 3-δ (0.2 ≤ x ≤ 0.6) oxides are developed for direct CO 2 conversion to carbon monoxide (CO) in an intermediate-temperature SOEC (IT-SOEC). With a polarization resistance as low as 0.18 O cm 2 in pure CO 2 atmosphere, a remarkable current density of 2.24 A cm –2 was achieved at 1.5 V with La 0.6 Ca 0.4 Co 0.2 Fe 0.8 O 3-δ (LCCF64) as the cathode in La 0.8 Sr 0.2 Ga 0.83 Mg 0.17 O 3-δ (LSGM) electrolyte (300 µm) supported electrolysis cells using La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) as the air electrode at 800 °C. Furthermore, symmetrical cells with LCCF64 as the electrodes also show promising electrolysis performance of 1.78 A cm –2 at 1.5 V at 800 °C. In addition, stable cell performance has been achieved on direct CO 2 electrolysis at an applied constant current of 0.5 A cm –2 at 800 °C. The easily removable carbonate intermediate produced during direct CO 2 electrolysis makes LCCF64 a promising regenerable cathode. The outstanding electrocatalytic performance of the LCCF64 cathode is ascribed to the highly active and stable metal/perovskite interfaces that resulted from the in situ exsolved Co/CoFe nanoparticles and the additional oxygen vacancies originated from the Ca 2 Fe 2 O 5 phase synergistically providing active sites for CO 2 adsorption and electrolysis. Here this study offers a novel approach to design catalysts with high performance for direct CO 2 electrolysis.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Oxidative Grafting for Catalyst Synthesis in Surface Organometallic Chemistry

The development of new methods of catalyst synthesis with the potential to generate active site structures orthogonal to those accessible by traditional protocols is of great importance for discovering new materials for addressing challenges in the evolving energy and chemical economy. Here, in this work, the generality of oxidative grafting of organometallic and well-defined molecular metal precursors onto redox-active surfaces such as manganese dioxide (MnO 2 ) and lithium manganese oxide (LiMn 2 O 4 ) is investigated. Nine molecular metal precursors are explored, spanning groups 4–11 and each of the three periods of the transition metal series. The byproducts of the oxidative grafting reaction, a mixture of protodemetalation and ligand homocoupling for several organometallic precursors, was found to provide insights into the mechanism of the grafting reaction, suggesting oxidation of both the metal d-orbitals, as well as the metal–carbon σ-bonds, resulting in ejection of the ligand radical fragment. Analysis of the supported structures and oxidation state by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) suggests that several of the chemisorbed metal ions are intercalated into interstitial vacancies of the surface structure while other complexes form intact molecular fragments on the surface. Proof of concept for the use of this metalation protocol to generate diverse, metal-dependent catalytic performance is demonstrated by the application of these materials in the conversion of cyclohexane to K/A oil (cyclohexanol and cyclohexanone) with tert-butyl hydroperoxide, as well as in the low-temperature (T ≤ 50 °C) oxidation of carbon monoxide to carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗