Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Trajectory analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Center of mass estimation in closed vortices - A verification in principle and practice

The problem of tracking closed mesoscale vortices using center of mass estimation techniques is studied. Three estimators are evaluated using data from a warm core Gulf Stream ring. The comparisons show that a method based on the intersection of perpendicular bisectors and one using a least-squares fit of a conic section perform comparably. The perpendicular bisector algorithm is used in conjunction with a Gaussian ring model and a star-shaped survey pattern to produce an expected error curve as a function of vortex translation, survey speed and vortex size. For typical ring parameters, center estimation is usually possible to within + or - 5 km. The feasibility of using differing data sets to construct a history of ring motion based on a coordinate system moving with the ring is also investigated. In this way, the validity of using satellite-derived data and drifter trajectories to estimate the center of mass of a mesoscale feature is assessed. The results of the analysis demonstrate that the location of the deeper structure of the ring and the surface expression are sufficiently well correlated to permit dynamically relevant calculations based on surface measurements. It is shown that satellite-derived data can be used to approximate the center of mass trajectory to within the error in the individual center estimates for the period analyzed. The Lagrangian-drifter-derived centers are offset from the center of mass trajectory in a manner consistent with kinematic arguments.

Hooker, S. B.↗
NASA NTRS2008

Aerodynamics for the Mars Phoenix Entry Capsule

Pre-flight aerodynamics data for the Mars Phoenix entry capsule are presented. The aerodynamic coefficients were generated as a function of total angle-of-attack and either Knudsen number, velocity, or Mach number, depending on the flight regime. The database was constructed using continuum flowfield computations and data from the Mars Exploration Rover and Viking programs. Hypersonic and supersonic static coefficients were derived from Navier-Stokes solutions on a pre-flight design trajectory. High-altitude data (free-molecular and transitional regimes) and dynamic pitch damping characteristics were taken from Mars Exploration Rover analysis and testing. Transonic static coefficients from Viking wind tunnel tests were used for capsule aerodynamics under the parachute. Static instabilities were predicted at two points along the reference trajectory and were verified by reconstructed flight data. During the hypersonic instability, the capsule was predicted to trim at angles as high as 2.5 deg with an on-axis center-of-gravity. Trim angles were predicted for off-nominal pitching moment (4.2 deg peak) and a 5 mm off-axis center-ofgravity (4.8 deg peak). Finally, hypersonic static coefficient sensitivities to atmospheric density were predicted to be within uncertainty bounds.

Edquist, Karl T.↗
NASA NTRS2014

Passive Thermal Control for the Low Density Supersonic Decelerator (LDSD) Test Vehicle Spin Motors Sub-System

Future missions to Mars will require improved entry, descent, and landing (EDL) technology over the Viking-heritage systems which recently landed the largest payload to date, the 900 kg Mars Science Laboratory. As a result, NASA's Low Density Supersonic Decelerator (LDSD) project is working to advance the state of the art in Mars EDL systems by developing and testing three key technologies which will enable heavier payloads and higher altitude landing sites on the red planet. These technologies consist of a large 33.5 m diameter Supersonic Disk Sail (SSDS) parachute and two different Supersonic Inflatable Aerodynamic Decelerator (SIAD) devices - a robotic class that inflates to a 6 m diameter torus (SIAD-R), and an exploration class that inflates to an 8 m diameter isotensoid (SIADE). All three technologies will be demonstrated on test vehicles at high earth altitudes in order to simulate the Mars EDL environment. Each vehicle will be carried to altitude by a large helium balloon, released, spun up using spin motors to stabilize the vehicle's trajectory, and accelerated to supersonic speeds using a large solid rocket motor. The vehicle will then be spun down using another set of spin motors, and will deploy either the SIAD-R or SIAD-E, followed by the SSDS parachute until the vehicle lands in the ocean. Component level testing and bounding analysis are used to ensure the survival of system components in extreme thermal environments and predict temperatures throughout the flight. This paper presents a general description of the thermal testing, model correlation, and analysis of the spin motor passive thermal control sub-system to maintain spin motor performance, prescribed vehicle trajectory, and structural integrity of the test vehicle. The spin motor subsystem is predicted to meet its requirements with margin.

thermal analysis↗
NASA NTRS2001

Aerothermal Analysis of the Project Fire II Afterbody Flow

Computational fluid dynamics (CFD) is used to simulate the wake flow and afterbody heating of the Project Fire II ballistic reentry to Earth at 11.4 km/sec. Laminar results are obtained over a portion of the trajectory between the initial heat pulse and peak afterbody heating. Although non-catalytic forebody convective heating results are in excellent agreement with previous computations, initial predictions of afterbody heating were about a factor of two below the experimental values. Further analysis suggests that significant catalysis may be occurring on the afterbody heat shield. Computations including finite-rate catalysis on the afterbody surface are in good agreement with the data over the early portion of the trajectory, but are conservative near the peak afterbody heating point, especially on the rear portion of the conical frustum. Further analysis of the flight data from Fire II shows that peak afterbody heating occurs before peak forebody heating, a result that contradicts computations and flight data from other entry vehicles. This result suggests that another mechanism, possibly pyrolysis, may be occurring during the later portion of the trajectory, resulting in less total heat transfer than the current predictions.

Wright, Michael J.↗
NASA NTRS1974

Impact of Saturn's rings on mission analysis for MJS 77

Mariner Jupiter-Saturn '77 mission objectives for Saturn are considered which affect the trajectory design and in particular the aim point at Saturn. These objectives include the following: (1) earth, sun occulation of Saturn, rings, and satellites; (2) close as possible to surface; (3) close as possible to rings; (4) close encounter with Titan (approximately 20,000 km); (5) close encounter with lapetus; (6) multiple satellite encounters; (7) post-Saturn trajectory to Uranus; and (8) post-Saturn trajectory toward solar apex.

Penzo, P. A.↗
NASA NTRS1975

Development of a method for optimal maneuver analysis of complex space missions

A system that allows mission planners to find optimal multiple-burn space trajectories easily is described. Previously developed methods with different gravity assumptions perform the optimization function. The power of these programs is extended by a method of costate estimation. A penalty function method of constraining coast arc times to be positive is included. The capability of the method is demonstrated by finding the optimal control for three different space missions. These include a shuttle abort-once-around mission and two- and three-burn geosynchronous satellite-placement missions.

Mcadoo, S. F., Jr.↗
NASA NTRS1995

The effects of spaceflight on open-loop and closed-loop postural control mechanisms: human neurovestibular studies on SLS-2

Stabilogram-diffusion analysis was used to examine how prolonged periods in microgravity affect the open-loop and closed-loop postural control mechanisms. It was hypothesized that following spaceflight: (1) the effective stochastic activity of the open-loop postural control schemes in astronauts is increased; (2) the effective stochastic activity and uncorrelated behavior, respectively, of the closed-loop postural control mechanisms in astronauts are increased; and (3) astronauts utilized open-loop postural controls schemes for shorter time intervals and smaller displacements. Four crew members and two alternates from the 14-day Spacelab Life Sciences 2 Mission were included in the study. Each subject was tested under eyes-open, quiet-standing conditions on multiple preflight and postflight days. The subjects' center-of-pressure trajectories were measured with a force platform and analyzed according to stabilogram-diffusion analysis. It was found that the effective stochastic activity of the open-loop postural control schemes in three of the four crew members was increased following spaceflight. This result is interpreted as an indication that there may be in-flight adaptations to higher-level descending postural control pathways, e.g., a postflight increase in the tonic activation of postural muscles. This change may also be the consequence of a compensatory (e.g., "stiffening") postural control strategy that is adopted by astronauts to account for general feeling of postflight unsteadiness. The crew members, as a group, did not exhibit any consistent preflight/postflight differences in the steady-state behavior of their closed-loop postural control mechanisms or in the functional interaction of their open-loop and closed-loop postural control mechanisms. These results are interpreted as indications that although there may be in-flight adaptations to the vestibular system and/or proprioceptive system, input from the visual system can compensate for such changes during undisturbed stance.

NASA Program Flight↗
DOE OSTI2024

The single-cell transcriptome program of nodule development cellular lineages in Medicago truncatula

Legumes establish a symbiotic relationship with nitrogen-fixing rhizobia by developing nodules. Nodules are modified lateral roots that undergo changes in their cellular development in response to bacteria, but the transcriptional reprogramming that occurs in these root cells remains largely uncharacterized. Here, we describe the cell-type-specific transcriptome response of Medicago truncatula roots to rhizobia during early nodule development in the wild-type genotype Jemalong A17, complemented with a hypernodulating mutant (sunn-4) to expand the cell population responding to infection and subsequent biological inferences. The analysis identifies epidermal root hair and stele sub-cell types associated with a symbiotic response to infection and regulation of nodule proliferation. Trajectory inference shows cortex-derived cell lineages differentiating to form the nodule primordia and, posteriorly, its meristem, while modulating the regulation of phytohormone-related genes. Gene regulatory analysis of the cell transcriptomes identifies new regulators of nodulation, including STYLISH 4, for which the function is validated.

Cell Biology↗
NASA NTRS1972

Thermal protection optimization for the space shuttle.

This paper discusses optimal entry trajectories for the space shuttle that minimize the weight of an entry thermal protection system. The analysis was made using mathematical models of two types of thermal protection systems that were under consideration for the space shuttle: a metallic thermal protection system, and a reusable surface insulation thermal protection system. Optimal entries were generated using maximum orbiter nose temperature as a parameter. Thermal protection system weights were computed for both fixed and variable angles of attack using three-dimensional entry trajectories. Results indicated that variable angle-of-attack entries require less thermal protection system weight than entries at a constant angle of attack (35 deg) for both systems considered. Results also showed that 95 to 99 per cent of the thermal protection system weight requirement resulted from flight regimes in which the flow was still laminar.

Garcia, F., Jr.↗
DOE OSTI2020

Photoproduction of η mesons off the proton for 1.2 < E γ < 4.7GeV using CLAS at Jefferson Laboratory

Photoproduction cross sections are reported for the reaction $\gamma p\to p\eta$ using energy-tagged photons and the CLAS spectrometer at Jefferson Laboratory. The $\eta$ mesons are detected in their dominant charged decay mode, $\eta\to \pi^+\pi^-\pi^0$, and results on differential cross sections are presented for incident photon energies between 1.2 and 4.7 GeV. These new $\eta$ photoproduction data are consistent with earlier CLAS results but extend the energy range beyond the nucleon resonance region into the Regge regime. The normalized angular distributions are also compared with the experimental results from several other experiments, and with predictions of $\eta$ MAID\,2018 and the latest solution of the Bonn-Gatchina coupled-channel analysis. Differential cross sections $d\sigma/dt$ are presented for incident photon energies $E_\gamma > 2.9$ GeV ($W > 2.5$ GeV), and compared with predictions which are based on Regge trajectories exchange in the $t$-channel (Regge models). Overall, the data confirm the expected dominance of $\rho$, $\omega$ vector-meson exchange in an analysis by the Joint Physics Analysis Center.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1996

Assessment of thermochemical nonequilibrium and slip effects for Orbital Reentry Experiment (OREX)

Results are provided from a viscous shock layer (VSL) analysis of the reentry flowfield around the forebody of the Japanese Orbital Reentry Experiment (OREX) vehicle. This vehicle is a 50 deg. spherically blunted cone with a nose radius of 1.35 m and a base diameter of 3.4 m. Calculations are done for the OREX trajectory from 105 to 48.4 km altitude range. A 7-species chemical model is found adequate for the flowfield analysis. However, for altitudes greater than 84 km, the low density effects (such as thermal nonequilibrium and slip) are to be implemented for good agreement between the predictions and flight inferred heat-transfer rate data. Further, at altitudes lower than 84 km, a finite surface recombination probability is to be employed in place of a non-catalytic surface for better comparison between the calculations and data. VSL results are also compared with the direct simulation Monte Carlo (DSMC) predictions at high altitudes (greater than 80 km) and the electron number density data for three altitudes in the OREX trajectory. Overall, there is a good comparison between the flight data and calculated results. With the ongoing refinements in data extraction procedures, the OREX data should prove valuable for validating theoretical models employed in flowfield codes for calculation of reacting-gas flowfields.

Gupta, Roop N.↗
DOE OSTI2023

Integrating Learning and Physics based Computation for Fast Online Transient Analysis

In this work, a novel method that integrates learning and physics based computation is developed for greatly accelerating the simulation of full power system transient trajectories. To solve the dynamic algebraic equations, the method replaces the time-consuming dynamic computation for generator dynamics with trained predictors, while retaining the time-efficient algebraic computation of solving AC-power flow (PF) for power systems. In particular, a predictor is trained for each generator, and the system trajectories are computed by alternating steps of calling the predictors and solving AC-PF. The proposed method also allows fully parallelizable training strategies and a flexible trade-off between training time and testing accuracy. Comprehensive evaluations of the proposed method for transient/dynamic contingency analysis of the New York/New England 16-machine 68-bus power systems demonstrate excellent performance and significant acceleration of computation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1987

Simulation and analysis of a geopotential research mission

Computer simulations were performed for a Geopotential Research Mission (GRM) to enable the study of the gravitational sensitivity of the range rate measurements between the two satellites and to provide a set of simulated measurements to assist in the evaluation of techniques developed for the determination of the gravity field. The simulations were conducted with two satellites in near circular, frozen orbits at 160 km altitudes separated by 300 km. High precision numerical integration of the polar orbits were used with a gravitational field complete to degree and order 360. The set of simulated data for a mission duration of about 32 days was generated on a Cray X-MP computer. The results presented cover the most recent simulation, S8703, and includes a summary of the numerical integration of the simulated trajectories, a summary of the requirements to compute nominal reference trajectories to meet the initial orbit determination requirements for the recovery of the geopotential, an analysis of the nature of the one way integrated Doppler measurements associated with the simulation, and a discussion of the data set to be made available.

Schutz, B. E.↗
DOE OSTI2022

Stress-controlled fatigue of HfNbTaTiZr high-entropy alloy and associated deformation and fracture mechanisms

The stress-controlled fatigue tests are carried out at a stress ratio of 0.1 and a frequency of 10 Hz, and span both low-cycle and high-cycle regimes by varying the applied stress amplitudes. The high-cycle fatigue regime gives a fatigue strength of 497 MPa and a fatigue ratio of 0.44. At equivalent conditions, the alloy's fatigue strength is greater than all other high-entropy alloys (HEAs) with reported high-cycle fatigue data, dilute body-centered cubic alloys, and many structural alloys such as steels, titanium alloys, and aluminum alloys. Through in-depth analyses of crack-propagation trajectories, fracture-surface morphologies and deformation plasticity by means of various microstructural analysis techniques and theoretical frameworks, the alloy's remarkable fatigue resistance is attributed to delayed crack initiation in the high-cycle regime, which is achieved by retarding the formation of localized persistent slip bands, and its good resistance to crack propagation in the low-cycle regime, which is accomplished by intrinsic toughening backed up by extrinsic toughening. Additionally, the stochastic nature of the fatigue data is neatly captured with a 2-parameter Weibull model.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlled plasma–droplet interactions: a quantitative study of OH transfer in plasma–liquid interaction

Plasmas in contact with liquids are a rich source of OH radicals and have been extensively studied in the last decade to leverage the ability to generate chemically reactive species in gas phase plasmas to decompose organics. Multiphase transfer of OH radicals is highly transport limited and to overcome transport limits, the plasma activation of aerosols, small liquid droplets, interspersed in the plasma has been proposed. In this work, we report a combined experimental and modeling study of a controlled plasma–droplet interaction experiment using a diffuse RF glow discharge in He + 0.2% H 2 O with detailed plasma diagnostics, ex situ analysis of the plasma-induced chemistry in the droplet containing formate, droplet trajectory and size measurements. This enables a quantitative study of the reactivity transfer of OH from the gas phase plasma to the liquid phase and how its diffusion limitations impact formate decomposition in the water droplet. For a droplet with a diameter of 36 μm, we observed 50% reduction in formate concentration in the droplets after plasma treatment for droplet residence times in the plasma of ~10 ms. These short droplet residence times in the plasma allow in some cases for droplet size reductions of ~5% in spite gas temperatures of 360 K. A one-dimensional reaction–diffusion model was used to calculate the OH transport and formate oxidation inside the droplet and was able to predict the conversion of formate by plasma in a droplet without any fitting parameters. The model further shows that formate conversion is dominated by near-interfacial reactions with OH radicals and is limited by diffusion of formate in the droplet. Here, the results show that a controlled plasma–micro-droplet reactor as reported in this study might be an excellent tool for detailed quantitative plasma–liquid interaction studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment (BIRDIE) (Final Report)

The Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment or BIRDIE was a precipitation collection campaign designed to measure cosmogenic isotopes of beryllium in rainfall and other forms of precipitation across the DOE Southern Great Plains (SGP) Atmospheric Radiation Measurement (ARM) site. Precipitation samples were collected over three weeks (May 21-June 10, 2022) at 11 SGP sites across a 120 km 2 domain in northern and central Oklahoma. The field campaign targeted summer-time convection rain events. We aimed to capture any spatial and/or temporal variability in the concentrations of beryllium-10 (10Be) and beryllium-7 (7Be) across the SGP ARM site during these rainfall events. The ratio of 10Be to 7Be (10/7Be) has been shown to be a powerful tracer for transport processes in the stratosphere-troposphere exchange (STE) system (e.g., Koch and Rind 1998). Any observed variability is analyzed to see if it could be linked to STE processes, including overshooting of deep convection clouds which penetrate the lower stratosphere. Six wet weather system events were collected within our three-week span. Five out of six of these rainfall events are classified as moderately to strongly convective. Those events are studied in more detail. The five systems also follow each other over a short time period of eleven days. In our rainfall samples we observed spatial and event variability in the concentrations of beryllium-10 and -7 which resulted in variability of 10/7 Be ratios. Each weather event appeared to exhibit a unique 10/7Be pattern across the domain that was not directly linked to storm total precipitation amount. To better understand the causes for this spatial variability, cloud characteristics in the domain were looked at to assess cloud type, cloud height and depth information. We also ran Hysplit back trajectories to identify possible air mass and moisture origins across our events. Detailed analysis is still on-going. The purpose of this technical report is to provide background on using cosmogenic isotopes as atmospheric tracers, describe the experimental design, and present the beryllium concentration and ratio data.

58 GEOSCIENCES↗
DOE OSTI2023

Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment (BIRDIE) (Field Campaign Report)

The Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment or BIRDIE was a precipitation collection campaign designed to measure cosmogenic isotopes of beryllium in rainfall and other forms of precipitation across the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) atmospheric observatory. Precipitation samples were collected over three weeks (May 21-June 10, 2022) at 11 SGP sites across a 120-km 2 domain in northern and central Oklahoma. The field campaign targeted summertime convection rain events. We aimed to capture any spatial and/or temporal variability in the concentrations of beryllium-10 (10Be) and beryllium-7 (7Be) across the ARM SGP site during these rainfall events. The ratio of 10Be to 7Be (10/7Be) has been shown to be a powerful tracer for transport processes in the stratosphere-troposphere exchange (STE) system (e.g., Koch and Rind 1998). Any observed variability is analyzed to see if it could be linked to STE processes, including overshooting of deep convection clouds that penetrate the lower stratosphere. Six wet weather system events were collected within our three-week span. Five out of six of these rainfall events are classified as moderately to strongly convective. Those events are studied in more detail. The five systems also follow each other over a short period of 11 days. In our rainfall samples we observed spatial and event variability in the concentrations of beryllium-10 and -7 that resulted in variability of 10/7Be ratios. Each weather event appeared to exhibit a unique 10/7Be pattern across the domain that was not directly linked to storm total precipitation amount. To better understand the causes for this spatial variability, cloud characteristics in the domain were looked at to assess cloud type, cloud height, and depth information. We also ran Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model back trajectories to identify possible air mass and moisture origins across our events. Detailed analysis is ongoing. The purpose of this technical report is to provide background on using cosmogenic isotopes as atmospheric tracers, describe the experimental design, and present the beryllium concentration and ratio data. Lastly, we note that BIRDIE coincided with two other deep convection field campaigns in the area: The National Aeronautics and Space Administration (NASA)’s Dynamics and Chemistry of the Summer Stratosphere (DCOTSS) experiment (https://dcotss.org/) centered in Salina, Kansas, and the Targeted Observation by Radars and (uncrewed aerial systems) UAS of Supercells (TORUS) experiment (https://catalog.eol.ucar.edu/torus_2022) across the U.S. Central Plains. Additionally, a Lawrence Livermore National Laboratory ( LLNL) team at DCOTSS attempted to measure 10Be/7Be ratios on aerosols collected in situ in the lower and mid-stratosphere over Kansas using high-altitude balloons. Precipitation samples were also collected on the ground in Salina, Kansas.

54 ENVIRONMENTAL SCIENCES↗