Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Composition-Dependent Reconstructions of Titanium Oxide Clusters and Cu(111) Support via Cluster-Adatom Interactions

Mass-selected cluster deposition and scanning tunneling microscopy (STM) were used to investigate the surface structure and thermal stability of Ti 3 O y (y = 5, 6) clusters on a Cu(111) surface. STM imaging shows that the substoichiometric Ti 3 O 5 clusters aggregate into large dendritic assemblies at step edges, while the stoichiometric Ti 3 O 6 clusters are highly dispersed as single or small groupings of clusters. Cluster deposition also results in extensive reconstruction of the Cu(111) surface. The Ti 3 O 5 /Cu(111) surface exhibits one Cu-layer deep pits that are ringed by cluster assemblies that nucleate and grow at the perimeter step edges. By comparison, the Ti 3 O 6 /Cu(111) surface consists of irregular step edges and small one Cu-layer islands that are decorated with clusters. The restructuring of the Cu(111) surface is attributed to strong Cu-cluster interactions that release Cu adatoms from the step edges. This mechanism is supported by density functional theory (DFT) calculations, which predict that the Cu adatom attachment to the clusters is energetically favorable. Annealing the surfaces at elevated temperatures (400-700 K) results in higher densities of irregular steps, pits and isolated Cu islands as well as increased cluster aggregation. In conclusion, this work highlights adatom-cluster interactions as another manifestation of strong cluster-support interactions that can significantly alter the nature of the oxide-metal interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamic Structural Changes of SiO₂ Supported Pt-Ni Bimetallic Catalysts over Redox Treatments Revealed by NMR and EPR

SiO 2 supported Pt-Ni bimetallic catalysts with different nickel loadings were prepared and their structural changes after redox treatments were studied by XRD, NMR, and EPR. It is found that the paramagnetic Ni species are mainly located on the surface of silica lattice. The relaxation of detected 29 Si nuclei in our samples is mainly governed by a spin-diffusion mechanism. The paramagnetic effects are reflected in the spin-lattice relaxation of Q 4 species, with the oxidized samples presenting faster relaxation rates than the corresponding reduced ones. Meanwhile the Q 3 species, which are in close contact with the paramagnetic nickel ions, are “spectrally invisible”. In reducing atmosphere Ni gradually diffuses into Pt NPs to form PtNi alloys. While under oxidization treatment, the alloyed Ni atoms migrate outward from the core of Pt NPs and are oxidized. The main EPR spectrum results from reduced nickel species, and the reduced samples show stronger EPR signal than the corresponding oxidized ones. However, in the reduced samples, the superparamagnetic or ferromagnetic metallic Ni particles were inside the PtNi NPs, making their influence on the 29 Si relaxation in the SiO 2 support weaker than the oxidized samples.

Environmental Molecular Sciences Laboratory↗

The Active State of Supported Ruthenium Oxide Nanoparticles during Carbon Dioxide Methanation

Ruthenium catalysts supported on TiO 2 have been shown to have competitive activity and selectivity for the methanation of CO 2 . In particular, a catalyst using preformed RuO 2 nanoparticles deposited on a TiO 2 support showed competitive performances in a previous study. In this article, ambient-pressure X-ray photoelectron spectroscopy was employed to determine the chemical state of this catalyst under reaction conditions. The active state of ruthenium was found to be the metallic one. Surface adsorbates were monitored in the steady state, and CH x species were found to be favored over adsorbed carbon monoxide at increasing temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Study of First-Row Transition Metals Supported on MOF NU-1000 for Catalytic Acceptorless Alcohol Dehydrogenation

Metal–organic frameworks (MOF) are a versatile family of mesoporous materials that can be used as solid supports to design well-defined catalytic sites. Herein we employ density functional theory (DFT) to evaluate first-row transition metals deposited on the MOF NU-1000 for acceptorless alcohol dehydrogenation, a reaction of great interest in hydrogen production and storage. The proposed mechanism we report reveals that the MOF support plays an active role in proton-transfer processes. The computational screening of first-row transition metals highlights Ni- and Co-derivatives as potential catalysts for the title reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nafion induced surface confinement of oxygen in carbon-supported oxygen reduction catalysts

We studied the surface confinement of oxygen inside layers of Nafion self-assembled on carbon-supported oxygen reduction reaction (ORR) catalysts. It is demonstrated that oxygen accumulates in the hydrophobic component of the polymer remaining in contact with the carbon surface. Furthermore, the amount of surface confined oxygen increases with the degree of carbon surface graphitization, which promotes the self-assembly of the polymer. Planar macrocyclic ORR catalysts possessing a delocalized system of π electrons such as Co and Fe porphyrins and phthalocyanines have virtually no effect on the surface confinement of oxygen, in accordance with their structural similarity to graphitic carbon surfaces where they adsorb. Platinum particles in carbon-supported ORR catalysts with high metal contents (20%) disrupt the self-assembly of Nafion and virtually eliminate the oxygen confinement, but the phenomenon is still observed for low Pt loading (4.8%) catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deactivation of Ceria Supported Palladium through C–C Scission during Transfer Hydrogenation of Phenol with Alcohols

The stability of palladium supported on ceria (Pd/CeO 2 ) was studied during liquid flow transfer hydrogenation using primary and secondary alcohols as hydrogen donors. For primary alcohols, the ceria support was reduced to cerium hydroxy carbonate within 14 h and was a contributing factor toward catalyst deactivation. For secondary alcohols, cerium hydroxy carbonate was not observed during the same time period and the catalyst was stable upon prolonged reaction. Regeneration through oxidation/reduction does not restore initial activity likely due to irreversible catalyst restructuring. Lastly, a deactivation mechanism involving C–C scission of acyl and carboxylate intermediates is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substrate-Mediated Evaporation and Stochastic Evolution of Supported Au Nanoparticles

Here, we use in situ transmission electron microscopy with automated tracking to study supported gold nanoparticles (NPs) during high-temperature vacuum annealing. The average mass loss per NP is governed by a flat, nearly size-independent substrate-mediated evaporation profile. On top of this mean shrinkage, individual NPs show significant fluctuations in apparent growth or shrinkage, and NP volume follows a random-walk-like trajectory. To rationalize both the ensemble-mean behavior and the particle-resolved variability, we develop a self-consistent theory that couples substrate-mediated evaporation to collective 2D Ostwald-type mass exchange through a shared adatom field, described in terms of a renormalized screening length and background concentration. In the experimentally relevant regime, the theory predicts an approximately size-independent mean shrinkage rate and clarifies how net mass loss suppresses classical coarsening. Superimposed on this deterministic drift, we quantify stochastic volume trajectories and capture their fluctuation spectrum with a minimal Langevin description consistent with intermittent adatom attachment and detachment events. In addition, we characterize the lateral diffusive motion of NPs, which is responsible for their coalescence. Altogether, our results highlight that stochasticity is intrinsic at the nanoscale and that predicting the evolution of supported NPs at early and intermediate times requires a unified framework combining substrate-mediated evaporation, collective mass exchange, and stochastic fluctuations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nucleation of Cu n ( n = 1–5) Clusters and Equilibrium Morphology of Cu Particles Supported on CeO 2 Surface: A Density Functional Theory Study

In the present work, the interactions between Cun (n=1~4) clusters and three low-index structural CeO2 (111, 110, 100) surfaces were investigated using density functional theory calculations. The atomic Cu prefers to aggregate into large clusters on the CeO2(111) surface while it is unfavorable on both CeO2(110) and CeO2(100) surfaces. Once the planar Cu4-p cluster is formed, it would convert into the 3D tetrahedral Cu4-t cluster on CeO2(110) and CeO2(111) surfaces, i.e., 2D to 3D transition growth is thermodynamically favorable and kinetically feasible on CeO2(110) and CeO2(111) surfaces. The effects of ceria support structure on the morphology of the large Cu nanoparticle was examined using calculated adhesion and interfacial energies of periodic Cu(khl)/CeO2 model systems. The calculated macroscopic contact angles (? > 100?) of various model systems suggest that the supported Cu nanoparticle is in bad wetting condition. Finally, the morphologies of large Cu nanoparticles on different CeO2 surfaces were predicted using Wulff-Kaichew construction principle.

Cu/CeO2 catalyst, Adsorption and nucleation, DFT c↗

Activation Mechanism and Surface Intermediates during Olefin Metathesis by Supported MoO x /Al 2 O 3 Catalysts

The activation of supported MoO x /Al 2 O 3 catalysts and the resulting surface intermediates were examined with in situ DRIFTS during olefin metathesis reaction conditions, aided by C 3 D 6 -C 3 H 6 isotopically labeled switching, C 2 H 4 -C 4 H 8 titration, and temperature programmed reaction experiments. The studies shows that activation by propylene of the surface MoO x sites on Al 2 O 3 initiates by forming surface isopropoxide species that subsequently dehydrogenate to acetone and surface Mo-OH. Desorption of acetone from the catalyst surface reduces the Mo +6 sites to Mo +4 sites, creating a vacancy for coordination of the next CH 2 =CHCH 3 molecule. Oxidative addition from subsequent adsorption of propylene on the surface Mo +4 sites results in formation of surface Mo=CH 2 and Mo=CHCH3 reactive intermediates, oxidizing the reduced surface molybdena sites back to Mo +6 . This study demonstrates the activation mechanism and surface intermediates during olefin metathesis by supported MoO x /Al 2 O 3 catalysts under reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Silica-Supported Boron Oxide Catalysts for the Oxidative Dehydrogenation of Propane

We report on the oxidative dehydrogenation (ODH) activity of silica-supported boron oxide prepared via incipient wetness impregnation. Characterization of pristine and spent catalysts with infrared, Raman, and solid-state NMR spectroscopy reveals the presence of both isolated and aggregated oxidized boron sites. The results of these investigations, in combination with our earlier work on bulk boron-containing ODH catalysts (e.g., h-BN, metal borides, and elemental boron), give direct evidence that oxidized boron species formed in situ on the surface of these materials are responsible for the exceptional catalytic behavior. Furthermore, we anticipate that investigation of supported boron materials can provide insight into the structural characteristics required for selective boron-containing ODH catalysts.

03 NATURAL GAS↗

Adsorbate-Induced Strong Metal–Support Interactions: Implications for Catalyst Design

Since the discovery of strong metal–support interactions (SMSIs) over supported metal catalysts in the 1970s, researchers have studied ways to harness this type of catalyst reconstruction to achieve enhanced stability of metal particles against sintering and to create catalytic sites with novel electronic and bonding properties. The motivation to elucidate performance–structure relationships in catalytic transformations has led researchers to take a closer look into catalytic surfaces under reaction conditions rather than a postreaction analysis. These investigations of operating catalysts have made it clear that SMSIs are more common than initially thought. Recent reports show how various adsorbed species, rather than traditional H 2 /O 2 treatment, can promote SMSI in various catalytic systems, a phenomenon named adsorbate-induced SMSI (A-SMSI). Researching the occurrence of A-SMSI has allowed fundamental understanding of catalyst stability, catalytic rates, and product selectivity. The present Perspective discusses the state-of-the-art regarding A-SMSI, the current challenges, and the opportunities ahead in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonclassical Strong Metal–Support Interactions for Enhanced Catalysis

Strong metal–support interaction (SMSI), which encompasses reversible encapsulation and de-encapsulation and modulation of surface adsorption properties, imposes great impacts on the performance of heterogeneous catalysts. Recent development of SMSI has surpassed the prototypical encapsulated Pt-TiO 2 catalyst, affording a series of conceptually novel and practically advantageous catalytic systems. Here, in this work, we provide our perspective on recent progress in nonclassical SMSIs for enhanced catalysis. Unravelling the structural complexity of SMSI necessitates the combination of multiple characterization techniques at different scales. Synthesis strategies leveraging chemical, photonic, and mechanochemical driving forces further expand the definition and application scope of SMSI. Exquisite structure engineering permits elucidation of the interface, entropy, and size effect on the geometric and electronic characteristics. Materials innovation places the atomically thin two-dimensional materials at the forefront of interfacial active site control. A broader space is awaiting exploration, where exploitation of metal–support interactions brings compelling catalytic activity, selectivity, and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Visualization of Independent Ta Centers Supported on Two-Dimensional TiO 2 Nanosheets

Highly dispersed, supported oxides are ubiquitous solid catalysts but can be challenging to characterize with atomic precision. Here, it is shown that crystalline anatase TiO 2 nanosheets (~5 nm thick) are ideal supports for imaging highly dispersed active sites. Ta cations were deposited by several routes, and high-resolution high angle annular dark-field scanning transmission electron microscopy was used to determine the location of Ta with respect to the TiO 2 lattice and quantify Ta–Ta distances. In the best case, it is shown that >80% of Ta atoms are isolated from one another, whereas other techniques are blind to this critical catalytic property or give only qualitative estimates. TiO 2 nanosheets may prove to be a useful platform for other types of catalysis studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Supported Organoiridium-Pincer Catalysts for the Nonoxidative Dehydrogenation of High-Density Polyethylene

The iridium-pincer complex {p-OP( t Bu) 2 -C 6 H 2 -2,6-OP( t Bu) 2 ] 2 }Ir(C 2 H 4 ) ( P [Ir]) has been reported as a stable and active catalyst toward alkane dehydrogenation in homogeneous and supported heterogeneous systems. Dehydrogenation has been shown as a practical method toward functional polyolefins, with dehydrogenated high-density polyethylene (deHDPE) demonstrated as a valuable synthon for upcycling, as orthogonal C-H strategies are key to end-of-life upcycling. The heterogenization of P [Ir] on oxides (SiO 2 , Al 2 O 3 , and TiO 2 ; P [Ir]/E y O x ) yields a mixture of organometallic Ir-fragments whose catalytic nonoxidative dehydrogenation activity is modulated by the binding modes of the active metal on the surface. The binding mode was elucidated by a combination of solid-state NMR and XAFS analyses and supported by DFT calculations. Surface binding through the ligand enables active organoiridium that catalyzes internal olefination of deHDPE up to 1.23 mol % at 200 °C under dynamic vacuum. Alternatively, when the organoiridium is bonded though the metal center (Ir-O SiO ), catalyst activity is negligible. Furthermore, the catalytic activity of P [Ir]/SiO 2 showed comparable reactivity with the homogeneous analogue under the same catalytic conditions, and the heterogenized catalyst can be reused up to three cycles. In conclusion, this work highlights the importance of understanding how organometallic precursors react with hydroxylated metal oxide surfaces to establish structure-property relationships.

Hunt, Samuel B. [Argonne National Laboratory (ANL)↗

Supported Single-Site Ti(IV) on a Metal–Organic Framework for the Hydroboration of Carbonyl Compounds

Here, a stable and structurally well-defined titanium alkoxide catalyst supported on a metal-organic-framework (MOF) of UiO-67 topology (ANL1-Ti(O i Pr) 2 ) was synthesized and fully characterized by a variety of analytical and spectroscopic techniques, including BET, TGA, PXRD, XAS, DRIFT, SEM, and DFT computations. The Ti-functionalized MOF was demonstrated active for the catalytic hydroboration of a wide range of aldehydes and ketones with HBpin as the boron source. Compared to traditional homogeneous and supported hydroboration catalysts, ANL1-Ti(O i Pr) 2 is completely recyclable and reusable, making it a promising hydroboration catalyst alternative for green and sustainable chemical synthesis. DFT calculations suggest that the catalytic hydroboration proceeds via a (1) hydride transfer between the active Ti-hydride species and a carbonyl moiety (rate determining step), and (2) alkoxide transfer (intramolecular σ-bond metathesis) to generate the boronate ester product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of Protective Coatings for Metal-Supported Solid Oxide Electrolysis Cells

Green hydrogen is essential to achieving carbon neutrality, and solid oxide electrolysis cells can produce hydrogen using renewable power and waste heat. Insufficient long-term durability of solid oxide electrolysis cells has impeded their commercialization. Here, coatings in the porous stainless steel support of metal-supported solid oxide electrolysis cells (MS-SOECs) are used to dramatically improve their performance and durability. The long-term degradation rate of uncoated MS-SOECs is highly dependent on the current density, with the fastest degradation occurring at the highest current density tested, 0.5 A cm -2 . At this current density, coatings are quite effective. Three protective coatings, Co 3 O 4 deposited by atomic layer deposition (ALD), Co 3 O 4 deposited by electroplating deposition (ED), and CuMn 1.8 O 4 (CMO) deposited by electrophoretic deposition (EPD), are explored to enhance the performance of MS-SOECs with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 -Sm 0.2 Ce 0.8 O 3 (LSCF-SDC) as the oxygen catalyst and SDC-Ni as the fuel catalyst. The initial average current density at 1.4 V is increased with coatings. It is 0.83 mA cm -2 for the ALD cells, 1.05 mA cm -2 for the ED cells, and 1.13 mA cm -2 for the EPD cells, compared to 0.65 mA cm -2 for the bare cells at 700 °C with 50% H 2 -50% H 2 O. The degradation rate over 1000 h of continuous operation is reduced from 36% to 26%, 27%, and 19% kh -1 with the three coatings, respectively. Furthermore, these improvements are ascribed to reduced Cr poisoning on the oxygen catalyst, which is one of the primary degradation modes for this type of MS-SOEC.

25 ENERGY STORAGE↗

Electrochemical Characterization and Catalytic Application of Gold-Supported Ferrocene-Containing Diblock Copolymer Thin Films in Ethanol Solution

This study reports the electrochemical behavior and catalytic property of electrode-supported thin films of polystyrene- block -poly(2-(acryloyloxy)ethyl ferrocenecarboxylate) (PS- b -PAEFc) in an ethanol (EtOH) solution. The electrochemical properties of PS- b -PAEFc films with different PAEFc volume fractions (f PAEFc = 0.47, 0.30, and 0.17) in 0.1 M ethanolic sodium hexafluorophosphate were compared with those in an acetonitrile (MeCN) solution of 0.1 M tetrabutylammonium hexafluorophosphate. Pristine PS- b -PAEFc films did not afford significant faradaic currents in the EtOH solution because EtOH is a nonsolvent for both PS and PAEFc. However, the films could be rendered redox-active in the EtOH solution by applying potentials in the MeCN solution to induce the redox-associated incorporation of the supporting electrolytes into the films. Atomic force microscopy images verified the stability of PAEFc microdomains upon electrochemical measurements in these solutions. Cyclic voltammograms measured in the EtOH solution for PS- b -PAEFc with the larger f PAEFc were diffusion-controlled regardless of ellipsometric film thickness (23 – 152 nm) at relatively slow scan rates, in contrast to those in the MeCN solution that were controlled by surface-confined redox species. The electron propagation efficiency in the EtOH solution was significantly lower than that in the MeCN solution due to the poorer swelling of the films, which limited the migration of counter ions and the collisional motions of the ferrocene moieties. PS- b -PAEFc films were applied as electrochemically-responsive heterogeneous catalysts based on the ferrocenium moieties for Michael addition reaction between methyl vinyl ketone and ethyl 2-oxocyclopentanecarboxylate (E2OC) in 0.1 M NaPF 6 /EtOH. The catalytic activities of thin films were similar regardless of f PAEFc , suggesting that the catalytic reaction took place for the reactants that could penetrate through the film and reach PAEFc microdomains communicable with the underlying electrode. Interestingly, the permeability of PS-b-PAEFc films provided a means to control the reaction selectivity, as suggested by negligible reaction of E2OC with trans -4-phenyl-3-buten-2-one.

36 MATERIALS SCIENCE↗

Continuous Flow Processing of ZIF-8 Membranes on Polymeric Porous Hollow Fiber Supports for CO 2 Capture

We have utilized an environmentally friendly synthesis approach for the accelerated growth of a selective inorganic membrane on a polymeric hollow fiber support for postcombustion carbon capture. Specifically, continuous defect-free ZIF-8 thin films were grown and anchored using continuous flow synthesis on the outer surface of porous supports using water as solvent. These membranes demonstrated CO 2 permeance of 22 GPU and the highest reported CO 2 /N 2 selectivity of 52 for a continuous flow synthesized ZIF-8 membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗