Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quantification of electrochemical-mechanical coupling in lithium-ion batteries

Lithium-ion battery safety and durability by nature are dependent on electrochemical and mechanical coupling. Interdisciplinary efforts are required to understand and quantify coupling behaviors. Here we design and conduct mechanically constrained charge and discharge characterizations with efforts supported by multiphysics modeling to unravel the coupling mechanisms of solid-liquid electrode-electrolyte and solid-solid active materials in lithium-ion batteries. We demonstrate that a lithium-ion battery cell under mechanical constraint exhibits a higher voltage during charging and a shorter charging time because of increased electrolyte resistance and decreased diffusivity caused by decreased electrode porosity. The reaction force response of the cell is a combined result of the cell structural response mechanically and lithium-ion intercalation/de-intercalation-induced volume variation electrochemically. Under mechanical constraint, cell capacity is significantly reduced in fast-charge scenarios; however, it can be recovered by a constant-voltage charge protocol. The results highlight the promise of multiphysics approaches to unravel the electrochemical-mechanical coupling mechanisms to direct battery system design and management.

25 ENERGY STORAGE↗
DOE OSTI2023

Chemical Feedback in the Self-Assembly and Function of Air–Liquid Interfaces: Insight into the Bottlenecks of CO 2 Direct Air Capture

As fossil fuels remain a major source of energy throughout the world, developing efficient negative emission technologies, such as direct air capture (DAC), which remove carbon dioxide (CO 2 ) from the air, becomes critical for mitigating climate change. Although all DAC processes involve CO 2 transport from air into a sorbent/solvent, through an air–solid or air–liquid interface, the fundamental roles the interfaces play in DAC remain poorly understood. In this work, we study the interfacial behavior of amino acid (AA) solvents used in DAC through a combination of vibrational sum frequency generation spectroscopy and molecular dynamics simulations. This study revealed that the absorption of atmospheric CO 2 has antagonistic effects on subsequent capture events that are driven by changes in bulk pH and specific ion effects that feedback on surface organization and interactions. Among the three AAs (leucine, valine, and phenylalanine) studied, we identify and separate behaviors from CO 2 loading, chemical changes, variations in pH, and specific ion effects that tune structural and chemical degrees of freedom at the air–aqueous interface. The fundamental mechanistic findings described here are anticipated to enable new approaches to DAC based on exploiting interfaces as a tool to address climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ThO 2 and Th 1– x U x O 2 Nanoscale Materials and Thin Films for Nuclear Science Applications

This study investigates the dynamics and mechanisms of solution combustion synthesis (SCS) for the preparation of nanoscale ThO 2 and Th 1–x U x O 2 materials, utilizing metal nitrates (Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 ) and acetylacetone (C 5 H 8 O 2 ) as reactants dissolved in a 2-methoxyethanol (C 3 H 8 O 2 ) solvent. By combining thermodynamic calculations, dynamic time–temperature profile measurements with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), this research reveals how variations in acetylacetone concentration and uranium content influence the structural parameters of the synthesized oxides. The time–temperature measurements show that the heating rate and maximum combustion temperatures are sensitive to acetylacetone concentration. DSC-TGA results indicate shifts in exothermic peak temperatures as the uranium content changes. The complexation between thorium and acetylacetone emerges as a critical factor, impacting combustion parameters and the structural characteristics of the final products. The uniform distribution of Th and U in the Th 1–x U x O 2 solid solution and the formation of nanoscale particles with strained crystallites are considered essential for the low-temperature densification of these materials for nuclear fuel pellet applications. Additionally, high-quality ThO 2 and Th 1–x U x O 2 thin (100–150 nm) films are successfully synthesized via electrospray deposition of combustible solutions followed by a brief period of heat treatment. Furthermore, these films exhibit excellent structural and morphological uniformity, making them ideal candidates for nuclear measurements, irradiation damage studies, and investigations into the physical properties of both pure and mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Interpreting nanovoids in atom probe tomography data for accurate local compositional measurements

Quantifying chemical compositions around nanovoids is a fundamental task for research and development of various materials. Atom probe tomography (APT) and scanning transmission electron microscopy (STEM) are currently the most suitable tools because of their ability to probe materials at the nanoscale. Both techniques have limitations, particularly APT, because of insufficient understanding of void imaging. Here, we employ a correlative APT and STEM approach to investigate the APT imaging process and reveal that voids can lead to either an increase or a decrease in local atomic densities in the APT reconstruction. Simulated APT experiments demonstrate the local density variations near voids are controlled by the unique ring structures as voids open and the different evaporation fields of the surrounding atoms. We provide a general approach for quantifying chemical segregations near voids within an APT dataset, in which the composition can be directly determined with a higher accuracy than STEM-based techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Geospatial modeling of near subsurface temperatures of the contiguous United States for assessment of materials degradation

Abstract Understanding subsurface temperature variations is crucial for assessing material degradation in underground structures. This study maps subsurface temperatures across the contiguous United States for depths from 50 to 3500 m, comparing linear interpolation, gradient boosting (LightGBM), neural networks, and a novel hybrid approach combining linear interpolation with LightGBM. Results reveal heterogeneous temperature patterns both horizontally and vertically. The hybrid model performed best achieving a root mean square error of 2.61 °C at shallow depths (50–350 m). Model performance generally decreased with depth, highlighting challenges in deep temperature prediction. State-level analyses emphasized the importance of considering local geological factors. This study provides valuable insights for designing efficient underground facilities and infrastructure, underscoring the need for depth-specific and region-specific modeling approaches in subsurface temperature assessment.

Science & Technology - Other Topics↗
DOE OSTI2020

Improved core-edge compatibility using impurity seeding in the small angle slot (SAS) divertor at DIII-D

Impurity seeding studies in the slot divertor (SAS) at DIII-D have revealed a strong relationship between the detachment onset and pedestal characteristics with both target geometry and impurity species. N 2 seeding in the slot has led to the first simultaneous observation of detachment on the entire suite of boundary diagnostics viewing the SAS without degradation of core confinement. SOLPS-ITER simulations with D+C+N, full cross-field drifts and n-n collisions activated are performed for the first time in DIII-D to interpret the behavior. This illustrates a strong effect of divertor configuration and plasma drifts on the recycling source distribution with significant consequences on plasma flows. Flow reversal is found for both main ions and impurities affecting strongly the impurity transport and providing an explanation for the observed dependence on strike point location of the detachment onset and impurity leakage found in the experiments. Matched discharges with either nitrogen or neon injection show that while nitrogen does not significantly affect the pedestal, neon leads to increased pedestal pressure gradient and improved pedestal stability. Little nitrogen penetrates in the core, but a great amount of neon is found in the pedestal consistent with the different ionization potentials of the two impurities. This research demonstrates that neutral and impurity distributions in the divertor can be controlled through variations in strike point locations in a fixed baffle structure. Divertor geometry combined with impurity seeding enables mitigated divertor heat flux balancing core contamination and thus leading to enhanced divertor dissipation and improved core-edge compatibility which are essential for ITER and for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Observation of conformational dynamics in single light-harvesting proteins from cryptophyte algae

Photosynthetic organisms use pigment–protein complexes to capture the sunlight that powers most life on earth. Within these complexes, the position of the embedded pigments is all optimized for light harvesting. At the same time, the protein scaffold undergoes thermal fluctuations that vary the structure, and, thus, photophysics, of the complexes. While these variations are averaged out in ensemble measurements, single-molecule spectroscopy provides the ability to probe these conformational changes. We used single-molecule fluorescence spectroscopy to identify the photophysical substates reflective of distinct conformations and the associated conformational dynamics in phycoerythrin 545 (PE545), a pigment–protein complex from cryptophyte algae. Rapid switching between photophysical states was observed, indicating that ensemble measurements average over a conformational equilibrium. A highly quenched conformation was also identified, and its population increased under high light. This discovery establishes that PE545 has the characteristics to serve as a photoprotective site. Finally, unlike homologous proteins from the evolutionarily related cyanobacteria and red algae, quenching was not observed upon photobleaching, which may allow for robust photophysics without the need for rapid repair or replacement machinery. Collectively, these observations establish the presence of a rich and robust set of conformational states of PE545. Cryptophytes exhibit particularly diverse energetics owing to the variety of microenvironments in which they survive, and the conformational states and dynamics reported here may provide photophysical flexibility that contributes to their remarkable ability to flourish under diverse conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Monovalent ion–graphene oxide interactions are controlled by carboxylic acid groups: Sum frequency generation spectroscopy studies

Graphene oxide (GO) is a two-dimensional, mechanically strong, and chemically tunable material for separations. Elucidating GO–ion–water interactions at the molecular scale is highly important for predictive understanding of separation systems. However, direct observations of the nanometer region by GO surfaces under operando conditions are not trivial. Therefore, thin films of GO at the air/water interface can be used as model systems. With this approach, we study the effects of alkali metal ions on water organization near graphene oxide films at the air/water interface using vibrational sum frequency generation (SFG) spectroscopy. Here, we also use an arachidic acid Langmuir monolayer as a benchmark for a pure carboxylic acid surface. Theoretical modeling of the concentration-dependent sum frequency signal from graphene oxide and arachidic acid surfaces reveals that the adsorption of monovalent ions is mainly controlled by the carboxylic acid groups on graphene oxide. An in-depth analysis of sum frequency spectra reveals at least three distinct water populations with different hydrogen bonding strengths. The origin of each population can be identified from concentration dependent variations of their SFG signal. Interestingly, an interfacial water structure seemed mostly insensitive to the character of the alkali cation, in contrast to similar studies conducted at the silica/water interface. However, we observed an ion-specific effect with lithium, whose strong hydration prevented direct interactions with the graphene oxide film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Variational Method for Analyzing Vortex Flows in Radar-Scanned Tornadic Mesocyclones. Part III: Sensitivities to Vortex Center Location Errors

Abstract When the vortex center location is estimated from a radar-scanned tornadic mesocyclone, the estimated location is not error-free. This raises an important issue concerning the sensitivities of analyzed vortex flow (VF) fields by the VF-Var (formulated in Part I of this paper series and tested in Part II) to vortex center location errors, denoted by Δ x c . Numerical experiments are performed to address this issue with the following findings: The increase of |Δ x c | from zero to a half of vortex core radius causes large analysis error increases in the vortex core but the increased analysis errors decrease rapidly away from the vortex core especially for dual-Doppler analyses. The increased horizontal-velocity errors in the vortex core are mainly in the Δ x c -normal component, because this component varies much more rapidly than the other component along the Δ x c direction in the vortex core. The vertical variations of Δ x c distort the vertical correlation structure of Δ x c -dislocated VF-dependent background error covariance, which can increase the analysis errors in the vortex core. The dual-Doppler analyses have adequate accuracies outside the vortex core even when |Δ x c | increases to a half of vortex core radius, while single-Doppler analyses can also have adequate accuracies outside the vortex core mainly for the single-Doppler-observed velocity component. The sensitivities to Δ x c are largely unaffected by the vortex slanting. The above findings are important and useful for assessing the accuracies of analyzed VFs for real radar-observed tornadic mesocyclones. Significance Statement When the vortex center location is estimated from a radar-scanned tornadic mesocyclone, the estimated location is not error-free. This raises an issue concerning the sensitivity of analyzed vortex flow (VF) by the VF-Var (formulated in Part I of this paper series and tested with simulated radar observations in Part II) to vortex center location error. This issue and its required investigations are very important for the VF-Var to be applied to real radar-observed tornadic mesocyclones, especially in an operational setting with the WSR-88Ds. Numerical experiments are performed to address this issue. The findings from these experiments are important and useful for assessing the accuracies of VF-Var analyzed VF fields for real radar-observed tornadic mesocyclones.

Xu, Qin↗
DOE OSTI2023

Photoconversion in Disordered Semiconductors: Spatial, Spectral, and Temporal Insights through Nonlinear Microscopy (Final Technical Report)

Conversion of solar photons to useable energy requires two processes to occur successfully in a light-harvesting material: 1) the initial photoexcited state must efficiently produce excited states that are free to move, and 2) those states must be transported to a new location where they can do useful work before any potential is lost as heat. The core focus of this project examined the spatial and energetic dynamics of these two primary events of photoconversion in solution-processed semiconducting materials. The electronic properties of these systems are complex and strongly influenced by the cumulative interaction of local morphology and composition, along with defects, interfaces, and trap sites. It is therefore important to interrogate these systems at the local level, where structural and compositional heterogeneity can be precisely correlated to variation in functionality. Utilizing ultrafast laser spectroscopy coupled together with optical microscopy, this project examined how excited states and free charges spatially and energetically evolve on length scales between 10 nanometers and 10 microns and on timescales from 50 femtoseconds to 1 nanosecond. Insights gained from measurements made on these characteristic length and time scales provided new insight into how macroscopic functionality in disordered photovoltaic materials emerges from the interplay of nanoscale and mesoscale interactions.

14 SOLAR ENERGY↗
DOE OSTI2025

Computationally Guided and Experimentally Validated Design of Custom Chelators for Critical Mineral Recovery

Selective, high throughput separation of target critical metals from complex environments such as fly ash leachates and mining process streams presents a significant challenge for economical production. Custom chelators and sorbents are an attractive technology for selective metal extraction, however it can be difficult to predict their performance, and significant experimental efforts are often required to develop chelating technologies. Here, we present a computational strategy focused on modelling chelator-metal binding interactions and benchmark these results versus experimental data. A computational pipeline combining forcefield, semiempirical, and meta-GGA methods with a thermodynamic framework optimized for error cancellation has been developed to predict binding energies of chelator complexes towards critical mineral recovery applications. This approach, originally validated on [2.2.2] cryptates binding mono- and divalent cations, demonstrated robust predictive capabilities with an R2 of 0.850 against experimental aqueous binding energies. The workflow includes metadynamics for exploring high-dimensional potential energy surfaces and a cluster-continuum model for accurate yet computationally efficient solvation modeling. Error cancellation between solvation energies of free and chelator-coordinated ions enables faster convergence, even with finite cluster sizes. Initial studies on the cryptates revealed consistent metal-ligand coordination patterns, with systematic variations influenced by ion size and charge, highlighting key structural features linked to binding selectivity. Further studies of a proprietary chelator have resulted in identification of previously unreported selectivity towards economically significant metals, which in-house experiments have confirmed, demonstrating the feasibility of this approach. By applying this methodology to new chelators targeting critical minerals such as lithium, cobalt, nickel and other strategic metals, we aim to accelerate the discovery of next-generation chelators for efficient recovery, recycling, and separation processes. This computational framework serves as the backbone of a high-throughput design pipeline tailored for sustainable resource utilization and may be applied to a wide range of systems to meet experimental needs.

computational materials↗
DOE OSTI2023

Bringing 2D Eclipse Mapping out of the Shadows with Leave-one-out Cross Validation

Abstract Eclipse mapping is a technique for inferring 2D brightness maps of transiting exoplanets from the shape of an eclipse light curve. With JWST’s unmatched precision, eclipse mapping is now possible for a large number of exoplanets. However, eclipse mapping has only been applied to two planets, and the nuances of fitting eclipse maps are not yet fully understood. Here, we use Leave-one-out Cross Validation (LOO-CV) to investigate eclipse mapping, with application to a JWST NIRISS/SOSS observation of the ultrahot Jupiter WASP-18b. LOO-CV is a technique that provides insight into the out-of-sample predictive power of models on a data-point-by-data-point basis. We show that constraints on planetary brightness patterns behave as expected, with large-scale variations driven by the phase-curve variation in the light curve and smaller-scale structures constrained by the eclipse ingress and egress. For WASP-18b we show that the need for higher model complexity (smaller-scale features) is driven exclusively by the shape of the eclipse ingress and egress. We use LOO-CV to investigate the relationship between planetary brightness map components when mapping under a positive-flux constraint to better understand the need for complex models. Finally, we use LOO-CV to understand the degeneracy between the competing “hot spot” and “plateau” brightness map models of WASP-18b, showing that the plateau model is driven by the ingress shape and the hot spot model is driven by the egress shape, but preference for neither model is due to outliers or unmodeled signals. Based on this analysis, we make recommendations for the use of LOO-CV in future eclipse-mapping studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Bioengineered algal lipids enriched in structured medium- and long-chain triacylglycerols, linoleate, and sn -2 palmitate for human milk fat substitutes

Human milk fat (HMF) contains triacylglycerol (TAG) as its primary component, providing over 50% of the calories for infant nutrition, along with structural and bioactive lipids that are important for immune and nervous system development. Palmitic acid, comprising 20-25% of the fatty acid complement of HMF, is predominantly esterified to the sn -2 position on the glycerol backbone. This regiospecific positioning facilitates absorption as 2-palmitoyl-monoacylglycerol after hydrolysis of the fatty acids at sn -1 and sn -2 by gut lipases. Other features of HMF include enrichment in structured medium- and long-chain triglycerides (MLCTs), and variation in the ratio of oleic acid to linoleic acid with maternal diet and geography. We have engineered Auxenochlorella, an oleaginous green alga, for biosynthesis of an MLCT- and sn -2 palmitate-enriched HMF substitute for infant formula, matching the regioisomeric composition and proportions of the most abundant fatty acids in HMF.

Lin, Jon Y-T [University of California, Berkeley;]↗
NASA NTRS1963

Mathematical Optimization Techniques

The papers collected in this volume were presented at the Symposium on Mathematical Optimization Techniques held in the Santa Monica Civic Auditorium, Santa Monica, California, on October 18-20, 1960. The objective of the symposium was to bring together, for the purpose of mutual education, mathematicians, scientists, and engineers interested in modern optimization techniques. Some 250 persons attended. The techniques discussed included recent developments in linear, integer, convex, and dynamic programming as well as the variational processes surrounding optimal guidance, flight trajectories, statistical decisions, structural configurations, and adaptive control systems. The symposium was sponsored jointly by the University of California, with assistance from the National Science Foundation, the Office of Naval Research, the National Aeronautics and Space Administration, and The RAND Corporation, through Air Force Project RAND.

Bellman, R.↗
NASA NTRS1971

Neutral upper atmosphere structure

Neutral thermosphere and exosphere structure, discussing density, temperature, composition and diurnal and seasonal variations

Keating, G. M.↗
NASA NTRS1972

The equatorial electrojet satellite and surface comparison

The OGO 4 and 6 (POGO) magnetic field results for the equatorial electrojet indicate that while the present models are approximately correct, the possibility of a westward component must be incorporated. The scatter diagrams of POGO amplitudes and surface data show a correlation. The ratios between the amplitudes estimated from surface data and those at 400 km altitude are as follows: India 5 to 8, East Africa (Addis Ababa) 4, Central Africa 3, West Africa (Nigeria) 3, South America (Huancayo) 5, and Philippines 5. The variation in the ratio is due to the conductivity structure of the earth in various zones.

Cain, J. C.↗
NASA NTRS1976

Positive ion densities and mobilities in the upper stratosphere and mesosphere

A brief sketch of the theory concerning the use of the Gerdien condenser as a mobility spectrometer is presented. Data reduction of three parachute borne Gerdien condenser probes is given, as well as that of one blunt conductivity probe. Comparisons of concentrations calculated by two different methods indicate consistency of results. Mobility profiles demonstrating remarkable fine structure are discussed in detail. Finally, theoretical implications of the results on ionospheric structure, including possible night-day differences and latitudinal variations, are considered.

Leiden, S.↗
NASA NTRS1976

A reliability-based cost effective fail-safe design procedure

The authors have developed a methodology for cost-effective fatigue design of structures subject to random fatigue loading. A stochastic model for fatigue crack propagation under random loading has been discussed. Fracture mechanics is then used to estimate the parameters of the model and the residual strength of structures with cracks. The stochastic model and residual strength variations have been used to develop procedures for estimating the probability of failure and its changes with inspection frequency. This information on reliability is then used to construct an objective function in terms of either a total weight function or cost function. A procedure for selecting the design variables, subject to constraints, by optimizing the objective function has been illustrated by examples. In particular, optimum design of stiffened panel has been discussed.

Hanagud, S.↗