Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Global energy balance simulations of shattered pellet injection

The dynamics of shattered pellet injection (SPI) shutdowns are simulated using a time-dependent global energy balance model, based on a modification of the KPRAD framework. The new SPI particle source in the model calculates the ablation of individual pellet fragments that enter the plasma as a temporally resolved plume, thus capturing the effects of earlier fragments on the ablation of those that follow, which has a significant impact on the overall assimilation. Despite the reduced physics and the global averaging of all quantities, results from a large number of DIII-D, KSTAR, and JET experiments are well reproduced, including the plasma cooling timescales, particle assimilation, and current quench (CQ) rates. Cooling timescales and CQ rates are in good agreement for pellets containing as little as ∼1% neon, while particle assimilations are most accurate for neon fractions above ∼15% by number of atoms. Below this, the assimilation tends to be overestimated due to the lack of radial transport in the particle balance, which becomes important in the low-Z limit. Predictive simulations of mixed-composition dual-SPI shutdowns in ITER are compared against those with the 3D non-linear magnetohydrodynamic code JOREK and are found to reproduce overall trends observed in the higher-fidelity modeling across a range of injection scenarios. The general success of the model points to the critical role of energy balance in determining SPI particle assimilation and the subsequent disruption dynamics and highlights the value of these simulations for experimental interpretation and for optimizing the deployment of computationally expensive, higher-fidelity models.

energy balance model↗
DOE OSTI2020

Protein folding from heterogeneous unfolded state revealed by time-resolved X-ray solution scattering

One of the most challenging tasks in biological science is to understand how a protein folds. In theoretical studies, the hypothesis adopting a funnel-like free-energy landscape has been recognized as a prominent scheme for explaining protein folding in views of both internal energy and conformational heterogeneity of a protein. Despite numerous experimental efforts, however, comprehensively studying protein folding with respect to its global conformational changes in conjunction with the heterogeneity has been elusive. Here we investigate the redox-coupled folding dynamics of equine heart cytochrome c (cyt-c) induced by external electron injection by using time-resolved X-ray solution scattering. A systematic kinetic analysis unveils a kinetic model for its folding with a stretched exponential behavior during the transition toward the folded state. With the aid of the ensemble optimization method combined with molecular dynamics simulations, we found that during the folding the heterogeneously populated ensemble of the unfolded state is converted to a narrowly populated ensemble of folded conformations. These observations obtained from the kinetic and the structural analyses of X-ray scattering data reveal that the folding dynamics of cyt-c accompanies many parallel pathways associated with the heterogeneously populated ensemble of unfolded conformations, resulting in the stretched exponential kinetics at room temperature. This finding provides direct evidence with a view to microscopic protein conformations that the cyt-c folding initiates from a highly heterogeneous unfolded state, passes through still diverse intermediate structures, and reaches structural homogeneity by arriving at the folded state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Geant4 Computing Performance Benchmarking and Monitoring

Performance evaluation and analysis of large scale computing applications is essential for optimal use of resources. As detector simulation is one of the most compute intensive tasks and Geant4 is the simulation toolkit most widely used in contemporary high energy physics (HEP) experiments, it is important to monitor Geant4 through its development cycle for changes in computing performance and to identify problems and opportunities for code improvements. All Geant4 development and public releases are being profiled with a set of applications that utilize different input event samples, physics parameters, and detector configurations. Results from multiple benchmarking runs are compared to previous public and development reference releases to monitor CPU and memory usage. Observed changes are evaluated and correlated with code modifications. Besides the full summary of call stack and memory footprint, a detailed call graph analysis is available to Geant4 developers for further analysis. The set of software tools used in the performance evaluation procedure, both in sequential and multi-threaded modes, include FAST, IgProf and Open|Speedshop. In conclusion, the scalability of the CPU time and memory performance in multi-threaded application is evaluated by measuring event throughput and memory gain as a function of the number of threads for selected event samples.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Application and performance of an ML-EM algorithm in NEXT

The goal of the NEXT experiment is the observation of neutrinoless double beta decay in (136)Xe using a gaseous xenon TPC with electroluminescent amplification and specialized photodetector arrays for calorimetry and tracking. The NEXT Collaboration is exploring a number of reconstruction algorithms to exploit the full potential of the detector. This paper describes one of them: the Maximum Likelihood Expectation Maximization (ML-EM) method, a generic iterative algorithm to find maximum-likelihood estimates of parameters that has been applied to solve many different types of complex inverse problems. In particular, we discuss a bi-dimensional version of the method in which the photosensor signals integrated over time are used to reconstruct a transverse projection of the event. First results show that, when applied to detector simulation data, the algorithm achieves nearly optimal energy resolution (better than 0.5% FWHM at the Q value of (136)Xe) for events distributed over the full active volume of the TPC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Imprint of DES superstructures on the cosmic microwave background

Here, small temperature anisotropies in the Cosmic Microwave Background can be sourced by density perturbations via the late-time integrated Sachs-Wolfe effect. Large voids and superclusters are excellent environments to make a localized measurement of this tiny imprint. In some cases excess signals have been reported. We probed these claims with an independent data set, using the first year data of the Dark Energy Survey in a different footprint, and using a different super-structure finding strategy. We identified 52 large voids and 102 superclusters at redshifts $0.2 < z < 0.65$. We used the Jubilee simulation to a priori evaluate the optimal ISW measurement configuration for our compensated top-hat filtering technique, and then performed a stacking measurement of the CMB temperature field based on the DES data. For optimal configurations, we detected a cumulative cold imprint of voids with $\Delta T_{f} \approx -5.0\pm3.7~\mu K$ and a hot imprint of superclusters $\Delta T_{f} \approx 5.1\pm3.2~\mu K$ ; this is $\sim1.2\sigma$ higher than the expected $|\Delta T_{f}| \approx 0.6~\mu K$ imprint of such super-structures in $\Lambda$CDM. If we instead use an a posteriori selected filter size ($R/R_{v}=0.6$), we can find a temperature decrement as large as $\Delta T_{f} \approx -9.8\pm4.7~\mu K$ for voids, which is $\sim2\sigma$ above $\Lambda$CDM expectations and is comparable to previous measurements made using SDSS super-structure data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Higher-order correlations between different moments of two flow amplitudes in Pb-Pb collisions at $\sqrt{s_{NN}} = 5.02$ TeV

The correlations between different moments of two flow amplitudes, extracted with the recently developed asymmetric cumulants, are measured in Pb-Pb collisions at $\sqrt {s_{NN}}$ = 5.02 TeV recorded by the ALICE detector at the CERN Large Hadron Collider. The magnitudes of the measured observables show a dependence on the different moments as well as on the collision centrality, indicating the presence of nonlinear response in all even moments up to the eighth. Furthermore, the higher-order asymmetric cumulants show different signatures than the symmetric and lower-order asymmetric cumulants. Comparisons with state-of-the-art event generators using two different parametrizations obtained from Bayesian optimization show differences between data and simulations in many of the studied observables, indicating a need for further tuning of the models behind those event generators. These results provide new and independent constraints on the initial conditions and transport properties of the system created in heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Interaction networks for the identification of boosted H → $b\overline b$ decays

We develop an algorithm based on an interaction network to identify high-transverse-momentum Higgs bosons decaying to bottom quark-antiquark pairs and distinguish them from ordinary jets that reflect the configurations of quarks and gluons at short distances. The algorithm's inputs are features of the reconstructed charged particles in a jet and the secondary vertices associated with them. Describing the jet shower as a combination of particle-to-particle and particle-to-vertex interactions, the model is trained to learn a jet representation on which the classification problem is optimized. The algorithm is trained on simulated samples of realistic LHC collisions, released by the CMS Collaboration on the CERN Open Data Portal. The interaction network achieves a drastic improvement in the identification performance with respect to state-of-the-art algorithms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Inferring Quantum Network Topology Using Local Measurements

Statistical correlations that can be generated across the nodes in a quantum network depend crucially on its topology. However, this topological information might not be known a priori, or it may need to be verified. In this paper, we propose an efficient protocol for distinguishing and inferring the topology of a quantum network. We leverage entropic quantities-namely, the von Neumann entropy and the measured mutual information-as well as measurement covariance to uniquely characterize the topology. We show that the entropic quantities are sufficient to distinguish two networks that prepare GHZ states. Moreover, if qubit measurements are available, both entropic quantities and covariance can be used to infer the network topology without state-preparation assumptions. We show that the protocol can be entirely robust to noise and can be implemented via quantum variational optimization. Numerical experiments on both classical simulators and quantum hardware show that covariance is generally more reliable for accurately and efficiently inferring the topology, whereas entropy-based methods are often better at identifying the absence of entanglement in the low-shot regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Coordinated Optimal Control of Constrained DERs

In this paper, a coordinated optimal control is designed to simultaneously satisfy multiple power system objectives at the distribution network level. With high penetration of renewables, traditional generation and control may not be enough to compensate for intermittent changes in net load. Dynamic coordination of battery storage devices and demand response at aggregated distributed energy resource (DER) sites becomes necessary to maintain power system operation, however, each dynamic power component operates at different time scales. Frequency stabilization can be achieved by designing optimal controls for traditional generation, storage devices and demand response. The proposed optimal controls naturally render frequency separation of these load balancing mechanisms. Given a 24-hour net load forecast, optimal tracking control inputs are designed subject to constraints of selected system elements to ensure optimal performance of the power system. Simulation results are presented and discussed.

Harvey, Roland↗
DOE OSTI2021

Offline Arterial Signal Timing Optimization for Closely Spaced Intersections

The stop-and-go driving behavior at a busy arterial causes a significant amount of fuel waste and emissions that could be reduced. For closely spaced intersections, the traditional bottom-up signal timing approach could fail under high volumes when the queues reach the upstream intersections. A well-coordinated arterial should manage the queue length to prevent the control from failing. Traditionally, coordination among signalized intersections for an arterial means finding the good offsets for each intersection. The control of the intersections along an arterial can also be coordinated by optimizing splits. Splits impact the capacity of an intersection. Similar to the highway, the capacity drop could cause growing queues. This work is based on the Virtual Phase-Link (VPL) model, a street traffic model designed for online traffic model predictive control, to obtain a top-down offline arterial signal timing. The VPL-based model can guarantee capacity consistency in intersections along an arterial. We, therefore, adopted the VPL-based model and developed an offline signal timing optimization approach. The proposed timing derived from the VPL-based offline signal timing optimization showed very good results in simulation. We also collected field experiment data, which demonstrated overall energy reductions and speed improvements on some sections of the study arterial.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Constrained Deep Reinforcement Learning for Energy Sustainable Multi-UAV Based Random Access IoT Networks With NOMA

In this paper, we apply the Non-Orthogonal Multiple Access (NOMA) technique to improve the massive channel access of a wireless IoT network where solar-powered Unmanned Aerial Vehicles (UAVs) relay data from IoT devices to remote servers. Specifically, IoT devices contend for accessing the shared wireless channel using an adaptive p-persistent slotted Aloha protocol; and the solar-powered UAVs adopt Successive Interference Cancellation (SIC) to decode multiple received data from IoT devices to improve access efficiency. To enable an energy-sustainable capacity-optimal network, we study the joint problem of dynamic multi-UAV altitude control and multi-cell wireless channel access management of IoT devices as a stochastic control problem with multiple energy constraints. We first formulate this problem as a Constrained Markov Decision Process (CMDP), and propose an online model-free Constrained Deep Reinforcement Learning (CDRL) algorithm based on Lagrangian primal-dual policy optimization to solve the CMDP. Extensive simulations demonstrate that our proposed algorithm learns a cooperative policy in which the altitude of UAVs and channel access probability of IoT devices are dynamically controlled to attain the maximal long-term network capacity while ensuring energy sustainability of UAVs, outperforming baseline schemes. The proposed CDRL agent can be trained on a small network, yet the learned policy can efficiently manage networks with a massive number of IoT devices and varying initial states, which can amortize the cost of training the CDRL agent.

42 ENGINEERING↗
DOE OSTI2024

Conductive Spray Paint Fabricated Cylindrical Coplanar Waveguide for Noncontact Liquid-Level Sensing

A noncontact liquid-level sensor using a cylindrical coplanar waveguide (CCPW) is proposed. The concept is demonstrated using a prototype device made by directly spraying conductive paint on the outer surface of a glass cylinder. The position of the air–liquid interface is measured using the time-domain reflection (TDR) signal from the CCPW. The geometric parameters of the prototype sensor were optimized using a full-wave simulation tool. The experimental results show that the prototype CCPW-based liquid-level sensor has a resolution of 29.8μm over a range of 210 mm at the sweeping frequency bandwidth of 500 MHz–4 GHz. The tradeoff between the resolution and the measurement range was discussed. The proposed sensor provides a low-cost, easy-to-fabricate, and noncontact method for liquid-level measurement, which has potential applications in fuel storage, chemical production, and wastewater treatment.

42 ENGINEERING↗
DOE OSTI2023

Distributed Load Shedding Application Architecture and Bi-Level Predictive Estimator Algorithm

Increasing penetrations of distributed renewables are decreasing the effectiveness of traditional decentralized under-frequency load shedding (UFLS) schemes. As more distribution circuits begin to back-feed the transmission system, operation of traditional UFLS may exacerbate frequency instability. This paper presents the conceptual framework for a data-rich environment to coordinate UFLS across multiple distribution providers based on the laminar coordination framework in order to ensure optimal adaptive setting of UFLS relays. Communication and control are enabled through a distributed implementation of the IEC 61968-1 Common Information Model message bus structure. In addition to the proposed architecture, a novel adaptive UFLS scheme informed by a bi-level state estimator to create optimal relay setpoints is introduced. Initial simulation results are presented for the IEEE 14-bus test system on scenarios leading to mis-operation of traditional UFLS.

Anderson, Alexander A.↗
DOE OSTI2021

Visual Tool for Assessing Stability of DER Configurations on Three-Phase Radial Networks

Here, we present a method and tool for evaluating the placement of Distributed Energy Resources (DER) on distribution circuits in order to control voltages and power flows. Our previous work described Phasor-Based Control (PBC), a novel control framework where DERs inject real and reactive power to track voltage magnitude and phase angle targets. Here, we employ linearized power flow equations and integral controllers to develop a linear state space model for PBC acting on a three-phase unbalanced network. We use this model to evaluate whether a given inverter-based DER configuration admits a stable set of controller gains, which cannot be done by analyzing controllability nor by using the Lyapunov equation. Instead, we sample over a parameter space to identify a stable set of controller gains. Our stability analysis requires only a line impedance model and does not entail simulating the system or solving an optimization problem. We incorporate this assessment into a publicly available visualization tool and demonstrate three processes for evaluating many control configurations on the IEEE 123-node test feeder (123NF).

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Integrating Quantum Computing with High-Performance Computing: A Streamlined Approach

In recent years, quantum computing has demon-strated the potential to revolutionize specific algorithms and applications by solving problems exponentially faster than classical computers. However, its widespread adoption for general computing remains a future prospect. This paper discusses the integration of quantum computing within High-Performance Computing (HPC) environments, focusing on a resource management framework designed to streamline quantum simulators' use and enhance runtime performance and efficiency. The proposed framework facilitates hybrid applications' transition from simulation backends to real quantum hardware, optimizing resource utilization and providing a flexible infrastructure for developing and testing quantum algorithms.

Shehata, Amir↗
DOE OSTI2018

Improved Performance of Asymptotically Optimal Rapidly Exploring Random Trees

Three algorithms that improve the performance of the asymptotically optimal Rapidly exploring Random Tree (RRT*) are presented here. First, we introduce the Goal Tree (GT) algorithm for motion planning in dynamic environments where unexpected obstacles appear sporadically. The GT reuses the previous RRT* by pruning the affected area and then extending the tree by drawing samples from a shadow set. The shadow is the subset of the free configuration space containing all configurations that have geodesics ending at the goal and are in conflict with the new obstacle. Smaller, well defined, sampling regions are considered for Euclidean metric spaces and Dubins' vehicles. Next, the Focused-Refinement (FR) algorithm, which samples with some probability around the first path found by an RRT*, is defined. The third improvement is the Grandparent-Connection (GP) algorithm, which attempts to connect an added vertex directly to its grandparent vertex instead of parent. The GT and GP algorithms are both proven to be asymptotically optimal. Finally, the three algorithms are simulated and compared for a Euclidean metric robot, a Dubins' vehicle, and a seven degrees-of-freedom manipulator.

42 ENGINEERING↗
DOE OSTI2019

Convolutional Neural Network Surrogate Models for the Mechanical Properties of Periodic Structures

The work in this paper describes neural network surrogate models for calculating the effective mechanical properties of a periodic composites. The models achieve good accuracy even when only provided with training data sampling a small portion of the design space. As an example, the surrogate models are applied to solving the inverse design problem of finding structures with optimal mechanical properties. The surrogate models are sufficiently accurate to recover optimal solutions in general agreement with established topology optimization methods. However, improvements will be required to develop robust, efficient neural network-based surrogate models and several directions for future research are highlighted here.

42 ENGINEERING↗
DOE OSTI2017

Pillars of the Mantle: Imaging the Interior of the Earth with Adjoint Tomography. In: PEARC17 Proceedings of the Practice and Experience in Advanced Research Computing 2017 on Sustainability, Success and Impact, Article No. 75

In this work, we investigate global seismic tomographic models obtained by spectral-element simulations of seismic wave propagation and adjoint methods. Global crustal and mantle models are obtained based on an iterative conjugate-gradient type of optimization scheme. Forward and adjoint seismic wave propagation simulations, which result in synthetic seismic data to make measurements and data sensitivity kernels to compute gradient for model updates, respectively, are performed by the SPECFEM3D_GLOBE package [1] [2] at the Oak Ridge Leadership Computing Facility (OLCF) to study the structure of the Earth at unprecedented levels. Using advances in solver techniques that run on the GPUs on Titan at the OLCF, scientists are able to perform large-scale seismic inverse modeling and imaging. Using seismic data from global and regional networks from global CMT earthquakes, scientists are using SPECFEM3D_GLOBE to understand the structure of the mantle layer of the Earth. Visualization of the generated data sets provide an effective way to understand the computed wave perturbations which define the structure of mantle in the Earth.

Pugmire, David↗