Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scale down”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Design of scaled down structural models

In the aircraft industry, full scale and large component testing is a very necessary, time consuming, and expensive process. It is essential to find ways by which this process can be minimized without loss of reliability. One possible alternative is the use of scaled down models in testing and use of the model test results in order to predict the behavior of the larger system, referred to herein as prototype. This viewgraph presentation provides justifications and motivation for the research study, and it describes the necessary conditions (similarity conditions) for two structural systems to be structurally similar with similar behavioral response. Similarity conditions provide the relationship between a scaled down model and its prototype. Thus, scaled down models can be used to predict the behavior of the prototype by extrapolating their experimental data. Since satisfying all similarity conditions simultaneously is in most cases impractical, distorted models with partial similarity can be employed. Establishment of similarity conditions, based on the direct use of the governing equations, is discussed and their use in the design of models is presented. Examples include the use of models for the analysis of cylindrical bending of orthotropic laminated beam plates, of buckling of symmetric laminated rectangular plates subjected to uniform uniaxial compression and shear, applied individually, and of vibrational response of the same rectangular plates. Extensions and future tasks are also described.

Simitses, George J.↗

Experimental observations of scale effects on bonded and bolted joints in composite structures

The objective is to observe size (scale) effects in (1) fiber dominated laminates and bolted joints, (2) adhesive (matrix) dominated bonded joints with fiber dominated laminate adherends, and (3) matrix dominated laminates. Selected literature on scale effects is reviewed with comments and test data from one source that is analyzed for predicted and actual scale effects utilizing uniaxial loaded static strength, spectrum fatigue residual strength, and spectrum fatigue lifetime test results. Causes of scale effects are discussed, the results are summarized, and conclusions are made.

Grimes, Glenn C.↗

Impact force as a scaling parameter

The Federal Aviation Administration (FAR PART 25) requires that a structure carry ultimate load with nonvisible impact damage and carry 70 percent of limit flight loads with discrete damage. The Air Force has similar criteria (MIL-STD-1530A). Both civilian and military structures are designed by a building block approach. First, critical areas of the structure are determined, and potential failure modes are identified. Then, a series of representative specimens are tested that will fail in those modes. The series begins with tests of simple coupons, progresses through larger and more complex subcomponents, and ends with a test on a full-scale component, hence the term 'building block.' In order to minimize testing, analytical models are needed to scale impact damage and residual strength from the simple coupons to the full-scale component. Using experiments and analysis, the present paper illustrates that impact damage can be better understood and scaled using impact force than just kinetic energy. The plate parameters considered are size and thickness, boundary conditions, and material, and the impact parameters are mass, shape, and velocity.

Poe, Clarence C., Jr.↗

Changes in photochemically significant solar UV spectral irradiance as estimated by the composite Mg II index and scale factors

Quantitative assessment of the impact of solar ultraviolet irradiance variations on stratospheric ozone abundances currently requires the use of proxy indicators. The Mg II core-to-wing index has been developed as an indicator of solar UV activity between 175-400 nm that is independent of most instrument artifacts, and measures solar variability on both rotational and solar cycle time scales. Linear regression fits have been used to merge the individual Mg II index data sets from the Nimbus-7, NOAA-9, and NOAA-11 instruments onto a single reference scale. The change in 27-dayrunning average of the composite Mg II index from solar maximum to solar minimum is approximately 8 percent for solar cycle 21, and approximately 9 percent for solar cycle 22 through January 1992. Scaling factors based on the short-term variations in the Mg II index and solar irradiance data sets have been developed to estimate solar variability at mid-UV and near-UV wavelengths. Near 205 nm, where solar irradiance variations are important for stratospheric photo-chemistry and dynamics, the estimated change in irradiance during solar cycle 22 is approximately 10 percent using the composite Mg II index and scale factors.

Deland, Matthew T.↗

Spatial scale of the substorm onset region determined from multi-point satellite and ground-based observations

The temporal and spatial scale of the onset of two substorm events is investigated using high resolution energetic particle and magnetic field data at synchronous orbit plus auroral and magnetic field data simultaneously taken from the ground based instrumentation. During both intervals the major expansion onset had precursor localized expansions without significant negative bay enhancement ('pseudobreakups'). Typical magnetospheric onset signatures such as tail current diversion, dipolarization, and injection were observed associated with some of the pseudobreakups. The major expansion, on the other hand, consisted of a number of rather localized injections and expansions, each of which had times scales of 5 to approximately 10 minutes, a comparable time scale to that of pseudobreakups. The number of occurrences, as well as the scale size of the magnetospheric source region, would constitute the major difference between pseudobreakup and the global expansion onset.

Nakamura, Rumi↗

Scaling in a scramjet combustor

Studies of scramjet combustor scaling have been extended to include testing of a 'small' combustor, thereby allowing comparison with results obtained in a 'large' combustor of nearly identical configuration. The scale of the two combustors varied by a factor of 5. It was anticipated that the combustion process would scale as the product of pressure with length if the temperature, the Mach number, the velocity, the free stream composition and the equivalence ratio were the same. To achieve this while allowing for the necessary difference in pressure the two models were tested with different shock tunnel nozzles. The large was tested in a M = 8 nozzle, with an intake consisting of a pair of opposing wedges preceding the model, which produced shocks to reduce the Mach number to approximately 3.4 before the flow entered the model inlet. It was then expanded to raise the Mach number again. The small model was tested in a M = 4 nozzle, with the nozzle flow passing directly to the inlet of the model. The wedge intake for the large model was adjusted to yield similar combustion chamber Mach number for both models. Then, by matching the stagnation enthalpy, it was possible also to match the temperature and the velocity. The free stream composition was matched by operating at the same nozzle supply pressure. Wall pressure distributions were measured along each of the ducts. The pressure is normalized with respect to the pressure measured at the point opposite to the injector exit, and the distance downstream of the exit is normalized with respect to the height of the duct. It can be seen that, when normalized in this manner, both ducts produce quantitatively similar pressure distributions, confirming the initial hypothesis that the combustion process would scale as the product of pressure with length.

Pulsonetti, M. V.↗

Composite intermediate case manufacturing scale-up for advanced engines

This Manufacturing Technology for Propulsion Program developed a process to produce a composite intermediate case for advanced gas turbine engines. The method selected to manufacture this large, complex part uses hard tooling for surfaces in the airflow path and trapped rubber to force the composite against the mold. Subelements were manufactured and tested to verify the selected design, tools, and processes. The most significant subelement produced was a half-scale version of a composite intermediate case. The half-scale subelement maintained the geometry and key dimensions of the full-scale case, allowing relevant process development and structural verification testing to be performed on the subelement before manufacturing the first full-scale case.

Ecklund, Rowena H.↗

Solar fine scale structures in the corona, transition region, and lower atmosphere

The American Science and Engineering Soft X-ray Imaging Payload and the Naval Research Laboratory High Resolution Telescope and Spectrograph (HRTS) were launched from White Sands on 1987 December 11 in coordinated sounding rocket flights. The goal was to investigate the correspondence of fine-scale structures from different temperature regimes in the solar atmosphere, and particularly the relationship between X-ray bright points (XBPs) and transition region explosive events. We present results of the analysis of co-aligned X-ray images, maps of sites of transition region explosive events observed in C IV 10(exp 5), HRTS 1600 A spectroheliograms of the T(sub min) region, and ground-based magnetogram and He I 10830 A images. We examined the relationship of He I 10830 A dark features and evolving magnetic features which correspond to XBPs. We note a frequent double ribbon pattern of the He I dark feature counterparts to XBPs. We discuss an analysis of the relationship of XBPs to evolving magnetic features by Webb et al., which shows that converging magnetic features of opposite polarity are the most significant magnetic field counterparts to XBPs. The magnetic bipolar features associated with XBPs appear as prominent network elements in chromospheric and transition region images. The features in C IV observations corresponding to XBP sites are in general bright, larger scale (approximately 10 arcsec) regions of complex velocity fields of order 40 km/s, which is typical of brighter C IV network elements. These C IV features do not reach the approximately 100 km/s velocities seen in the C IV explosive events. Also, there are many similar C IV bright network features without a corresponding XBP in the X-ray image. The transition region explosive events do not correspond directly to XBPs. The explosive events appear to be concentrated in the quiet Sun at the edges of strong network, or within weaker field strength network regions. We find a greater number of C IV events than expected from the results of a previous Spacelab 2 HRTS disk survey. We attribute this at least partly to better spatial resolution with the newer HRTS data. The full-disk X-ray image shows a pattern of dark lanes in quiet Sun areas. The number density of C IV events is twice as large inside as outside a dark lane (4.6 x 10(exp -3) vs. 2.3 x 10(exp -3) explosive events per arcsec (exp 2)). The dark lane corresponds to an old decaying magnetic neutral line. We suggest that this provides an increased opportunity for small-scale convergence and reconnection of opposite polarity magnetic field features, in analogy with the results of Webb et al. for XBPs but at a reduced scale of reconnection.

Moses, Dan↗

Probing the interstellar medium with pulsars on AU scales

We present a new technique, multiepoch observations of 21 cm absorption against high-velocity pulsars, to probe the properties of the cold neutral hydrogen gas (H I) in the interstellar medium (ISM) at AU scales. In three epochs, over a 1.7 yr interval, we find evidence for significant opacity variations toward all of the pulsars in our sample. Small-scale structure in the ISM is detected on a range of scales from 5 AU to 100 AU, over a wide range of distances (50-2600 pc), opacities (tau(sub max) = 0.1 - 2.5) and directions (anticenter, interarm, high latitude, and local ISM). It appears that small-scale structure is a general property of the ISM and is not confined to special lines of sight. A significant fraction (10%-15%) of the cold H I gas is in this form. These opacity variations do not show any strong correlations with such parameters as transverse distance or integrated opacity, and there is no obvious relation between these structures and those seen in the ionized phase of the ISM.

Frail, Dale A.↗

Large-scale structure effects on the gravitational lens image positions and time delay

We compute the fluctuations in gravitational lens image positions and time delay caused by large-scale structure correlations. We show that these fluctuations can be expressed as a simple integral over the density power spectrum. Using the Cosmic Background Explorer (COBE) normalization we find that positions of objects at cosmological distances are expected to deviate from their true positions by few arcminutes. These deflections are not directly observable. The positions of the images relative to one another fluctuate by a few percent of the relative separation, implying that one does not expect multiple images to be produced by large-scale structure. Nevertheless, the fluctuations are larger than the observational errors on the positions and affect reconstructions of the lens potential. The time delay fluctuations have a geometrical and a gravitational contribution. Both are much larger than the expected time delay from the primary lens, but partially cancel each other. We find that large-scale structure weakly affects the time delay and time delay measurements can be used as a probe of the distance scale in the universe.

Seljak, Uros↗

Termination shock response to large-scale solar wind fluctuations

The analysis of data recorded by the Voyager 2 spacecraft indicates the presence of large-scale fluctuations in the solar wind ram pressure on the time scale of tens of days. The amplitude of the fluctuations is highly variable but often lies within a factor of 5 to 10 change from an average or mean value of the ram pressure. Since the spacecraft has presumably not encountered the termination shock yet, these fluctuations should eventually interact with the shock and thereby play a role in determining the shock location. Numerical solutions of the time-dependent gasdynamic equations are used to simulate the response of the termination shock to fluctuations in the solar wind ram pressure comparable to those observed. The primary result of this study is that the maximum shock excursion due to the fluctuations is of the order of 1 AU, which is much smaller than that predicted by other studies. Additional simulations show that the limited movement is due to the fact that the time scale for the termination shock response is substantially larger than the time scale of the fluctuations. It is also shown that the heliopause acts as a barrier for the fluctuations and confines them to the heliosphere.

Steinolfson, R. S.↗

Global-scale waves in the Venus atmosphere

The nature of global-scale waves that can exist in the atmosphere of Venus is examined. A linear three-dimensional model atmosphere with spherical geometry is used to study large-scale forced and free waves. Solutions are obtained numerically with grid points in the vertical and a spherical harmonic expansion in the horizontal. Observations have shown a global-scale traveling wave with phase speed near the cloud-top wind velocity. Global-scale wave modes are found to exist in the model at this velocity. When a radiative-dynamic cloud feedback is added to the model, the most unstable wave mode is found to have the same phase speed as the observed wave. The horizontal structure of this wave is consistent with the observed horizontal structure of the 'Y' feature seen in ultraviolet images of the Venus cloud top.

Smith, Michael D.↗

Coronal heating by the resonant absorption of Alfven waves: Wavenumber scaling laws.

The importance of global modes in coronal loop heating is well established. In the present work the scaling of the global-mode resonant heating rate with the perturbation wavenumbers is studied with the numerical solution of the linearized time-dependent MHD equations for a full compressible, low-beta, resistive plasma using an implicit integration scheme. The numerical simulations demonstrate that the dissipation on inhomogeneties in the background Alfven speed occurs in narrow resonant layer with the highest heating rate at the global-mode frequency. The global-mode heating rate H (sub r) was found to scale as H (Sub r) approximately k (sub y) (exp 1.03) when k (sub z) = 0.1, and as H (sub r) approximately k (sub y) (exp -1.93) when k (sub z) = 0.75, where k (sub y) and k (sub z) are the wavenumbers in the perpendicular and parallel to the magnetic field directions, respectively, while the dependence of H (sub r) on k (sub z) is more complex. The quality factor Q of the MHD resonance cavity scales as Q approximately k (sub y) (exp -1.8) for k (sub z) = 0.75 and as Q approximately k (sub y) (exp -1.46) for k (sub z) = 0.1. The numerically determined heating rate scaling, the global-mode fequency, and the quality factor are in good agreement with the analytical linear theory. The magnitude of the perturbed velocities was found to decrease with k (sub y). Assuming typical coronal loop parameters (B (sub 0) = 100-200 G, upsilon (sub A) = 2000-4000 km/s), the Alfven waves can supply the required heating to a low-Q loops.

Ofman, L.↗

Wavelet transform analysis of the small-scale X-ray structure of the cluster Abell 1367

We have developed a new technique based on a wavelet transform analysis to quantify the small-scale (less than a few arcminutes) X-ray structure of clusters of galaxies. We apply this technique to the ROSAT position sensitive proportional counter (PSPC) and Einstein high-resolution imager (HRI) images of the central region of the cluster Abell 1367 to detect sources embedded within the diffuse intracluster medium. In addition to detecting sources and determining their fluxes and positions, we show that the wavelet analysis allows a characterization of the sources extents. In particular, the wavelet scale at which a given source achieves a maximum signal-to-noise ratio in the wavelet images provides an estimate of the angular extent of the source. To account for the widely varying point response of the ROSAT PSPC as a function of off-axis angle requires a quantitative measurement of the source size and a comparison to a calibration derived from the analysis of a Deep Survey image. Therefore, we assume that each source could be described as an isotropic two-dimensional Gaussian and used the wavelet amplitudes, at different scales, to determine the equivalent Gaussian Full Width Half-Maximum (FWHM) (and its uncertainty) appropriate for each source. In our analysis of the ROSAT PSPC image, we detect 31 X-ray sources above the diffuse cluster emission (within a radius of 24 min), 16 of which are apparently associated with cluster galaxies and two with serendipitous, background quasars. We find that the angular extents of 11 sources exceed the nominal width of the PSPC point-spread function. Four of these extended sources were previously detected by Bechtold et al. (1983) as 1 sec scale features using the Einstein HRI. The same wavelet analysis technique was applied to the Einstein HRI image. We detect 28 sources in the HRI image, of which nine are extended. Eight of the extended sources correspond to sources previously detected by Bechtold et al. Overall, using both the PSPC and the HRI observations, we detect 16 extended features, of which nine have galaxies coincided with the X-ray-measured positions (within the positional error circles). These extended sources have luminosities lying in the range (3 - 30) x 10(exp 40) ergs/s and gas masses of approximately (1 - 30) x 10(exp 9) solar mass, if the X-rays are of thermal origin. We confirm the presence of extended features in A1367 first reported by Bechtold et al. (1983). The nature of these systems remains uncertain. The luminosities are large if the emission is attributed to single galaxies, and several of the extended features have no associated galaxy counterparts. The extended features may be associated with galaxy groups, as suggested by Canizares, Fabbiano, & Trinchieri (1987), although the number required is large.

Grebeney, S. A.↗

Termination shock response to large-scale solar wind fluctuations

The analysis of data recorded by the Voyager 2 spacecraft indicates the presence of large-scale fluctuations in the solar wind ram pressure on the time scale of tens of days. The amplitude of the fluctuations is highly variable but often lies within a factor of 5 to 10 change from an average or mean value of the ram pressure. Since the spacecraft has presumably not encountered the termination shock yet, these fluctuations should eventually interact with the shock and thereby play a role in determining the shock location. Numerical solutions of the time-dependent gas dynamic equations are used to simulate the response of the termination shock to fluctuations in the solar wind ram pressure comparable to those observed. The primary result of this study is that the maximum shock excursion due to the fluctuations is of the order of 1 AU, which is much smaller than that predicted by other studies. Additional simulations show that the limited movement is due to the fact that the time scale for the termination shock response is substantially larger than the time scale of the fluctuations. It is also shown that the heliopause acts as a barrier for the fluctuations and confines them to the heliosphere.

Steinolfson, R. S.↗

Monthly mean large-scale analyses of upper-tropospheric humidity and wind field divergence derived from three geostationary satellites

This paper describes the results from a collaborative study between the European Space Operations Center, the European Organization for the Exploitation of Meteorological Satellites, the National Oceanic and Atmospheric Administration, and the Cooperative Institute for Meteorological Satellite Studies investigating the relationship between satellite-derived monthly mean fields of wind and humidity in the upper troposphere for March 1994. Three geostationary meteorological satellites GOES-7, Meteosat-3, and Meteosat-5 are used to cover an area from roughly 160 deg W to 50 deg E. The wind fields are derived from tracking features in successive images of upper-tropospheric water vapor (WV) as depicted in the 6.5-micron absorption band. The upper-tropospheric relative humidity (UTH) is inferred from measured water vapor radiances with a physical retrieval scheme based on radiative forward calculations. Quantitative information on large-scale circulation patterns in the upper-troposphere is possible with the dense spatial coverage of the WV wind vectors. The monthly mean wind field is used to estimate the large-scale divergence; values range between about-5 x 10(exp -6) and 5 x 10(exp 6)/s when averaged over a scale length of about 1000-2000 km. The spatial patterns of the UTH field and the divergence of the wind field closely resemble one another, suggesting that UTH patterns are principally determined by the large-scale circulation. Since the upper-tropospheric humidity absorbs upwelling radiation from lower-tropospheric levels and therefore contributes significantly to the atmospheric greenhouse effect, this work implies that studies on the climate relevance of water vapor should include three-dimensional modeling of the atmospheric dynamics. The fields of UTH and WV winds are useful parameters for a climate-monitoring system based on satellite data. The results from this 1-month analysis suggest the desirability of further GOES and Meteosat studies to characterize the changes in the upper-tropospheric moisture sources and sinks over the past decade.

Schmetz, Johannes↗

Small scales formation via Alfven wave propagation in compressible nonuniform media

In weakly dissipative media governed by the magnetohydrodynamics (MHD) equations, any efficient mechanism of energy dissipation requires the formation of small scales. The possibility to produce small scales has been studied by Malara et al. in the case of MHD disturbances propagating in an incompressible and inhomogeneous medium, for a strictly 2D geometry. We extend the work of Malara et al. to include both compressibility and the third component for vector quantities. Using numerical simulations we show that, when an Alfven wave propagates in a compressible nonuniform medium, the two dynamical effects responsible for the small scales formation in the incompressible case are still at work: energy pinching and phase-mixing. Moreover, the interaction between the initial Alfven wave and the inhomogeneity gives rise to the formation of compressible perturbations (fast and slow waves or a static entropy wave). Some of these compressive fluctuations are subject to the steepening of the wave front and become shock waves, which are extremely efficient in dissipating their energy, their dissipation being independent of the Reynolds number. A rough estimate of the typical times which the various dynamical processes take to produce small scales and then to dissipate the energy show that these times are consistent with those required to dissipate inside the solar corona the energy of Alfven waves of photospheric origin.

Malara, F.↗

Full-scale S-76 rotor performance and loads at low speeds in the NASA Ames 80- by 120-Foot Wind Tunnel

A full-scale helicopter rotor test was conducted in the NASA Ames 80- by 120-Foot Wind Tunnel with a four-bladed S-76 rotor system. Rotor performance and loads data were obtained over a wide range of rotor shaft angles-of-attack and thrust conditions at tunnel speeds ranging from 0 to 100 kt. The primary objectives of this test were (1) to acquire forward flight rotor performance and loads data for comparison with analytical results; (2) to acquire S-76 forward flight rotor performance data in the 80- by 120-Foot Wind Tunnel to compare with existing full-scale 40- by 80-Foot Wind Tunnel test data that were acquired in 1977; (3) to evaluate the acoustic capability of the 80- by 120- Foot Wind Tunnel for acquiring blade vortex interaction (BVI) noise in the low speed range and compare BVI noise with in-flight test data; and (4) to evaluate the capability of the 80- by 120-Foot Wind Tunnel test section as a hover facility. The secondary objectives were (1) to evaluate rotor inflow and wake effects (variations in tunnel speed, shaft angle, and thrust condition) on wind tunnel test section wall and floor pressures; (2) to establish the criteria for the definition of flow breakdown (condition where wall corrections are no longer valid) for this size rotor and wind tunnel cross-sectional area; and (3) to evaluate the wide-field shadowgraph technique for visualizing full-scale rotor wakes. This data base of rotor performance and loads can be used for analytical and experimental comparison studies for full-scale, four-bladed, fully articulated rotor systems. Rotor performance and structural loads data are presented in this report.

Shinoda, Patrick M.↗