Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STORED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Metallographic examinations and hydrogen measurements of high-burnup spent nuclear fuel cladding

In the US, commercial spent nuclear fuel (SNF) is transferred to interim dry storage casks where it will be stored for decades awaiting transport to a consolidated interim storage facility or a geologic repository. Because the fuel rod cladding is the first barrier against any radioactive material release, understanding the behavior of SNF cladding, particularly at high burnup (HBU), in dry storage conditions is crucial to safely store and transport the spent fuel. In this study, a series of metallographic examinations and cladding hydrogen measurements were conducted on HBU SNF cladding at Oak Ridge National Laboratory as a part of the High Burnup Spent Fuel Data Project, which is sponsored by the US Department of Energy (DOE) Office of Nuclear Energy (NE). Here, t o investigate the effect of simulated drying conditions on the cladding, three as-received fuel rods with different cladding materials—M5, ZIRLO, and Zircaloy-4—were heated to 400°C and then slow-cooled to room temperature. The pellet and cladding were then qualitatively and quantitatively analyzed and compared in terms of pellet crack morphology, HBU rim, waterside oxide, cladding H, and cladding hydride morphologies. This paper presents and discusses the results of these analyses in detail.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multiscale characterization of phase change materials for building thermal energy storage applications

Phase change materials (PCMs) store and release large amounts of thermal energy because of their high latent energy storage capacity. However, long-term cyclic stability, supercooling and performance-scalability are some of the major challenges for their use in building thermal energy storage (TES) applications. Here, in this study, we present a comprehensive multiscale characterization of two commercially available organic PCMs, Puretemp 18 and Puretemp 23. At the microscale, differential scanning calorimetry (DSC) was used to characterize phase change temperature, specific heat, and latent heat. At the mesoscale, a heat flow meter apparatus (HFMA), following the ASTM C1784 standard, was employed to measure the phase change temperature, specific heat, and latent heat properties. A comparative analysis of latent heat as a function of temperature was conducted by integrating the DSC and HFMA results. At the macroscale, the thermal performance and cyclic stability of the TES system was evaluated using Puretemp 23. The TES system consisted of a finned tube heat exchanger with a storage volume of 0.0189 m 3 (5 gal), which represents a compact, real-world TES solution suitable for building energy storage. The results showed consistent thermal stability of the PCM over 200 cycles, and the supercooling temperature remained within 0.2 °C, which was not detected in smaller-scale characterization methods. Additionally, the macroscale testing methodology of the PCM revealed that the TES is able to charge and discharge stored latent energy within 2 h under a temperature differential of 16.67 °C measured between the inlet water temperature and the phase transition temperature of the PCM. The proposed multiscale PCM characterization method provides a systematic basis for comparing important thermal storage properties while also investigating the scalability, reliability and integration challenges in large scale TES applications.

Latent heat↗

Physics-aware adaptive checkpointing with shadow systems for nonlinear PDE simulations

Large-scale simulations of nonlinear partial differential equations (PDEs) that exhibit strongly transient behavior and pattern-forming dynamics produce enormous amounts of data, which, even with modern storage systems, cannot be stored for later curation. Current I/O strategies either write dense time series of snapshots, which is often prohibitive in I/O and storage, or store a few checkpoints that enable restart but incur expensive recomputation cost and provide no control over post-restart error growth, especially when lossy compression is used. Moreover, most, if not all, existing strategies take no account of the actual physical state of the system. Here, we present a simple physics-aware I/O framework in which a low-cost shadow system adaptively triggers lossy checkpoints when the shadow system deviates from the fine-scale simulation. The shadow system can be a coarsened replica of the fine-scale simulation that evolves concurrently. This means that checkpoints are taken based on the physical state of the system: fewer checkpoints are triggered when the system is quiescent while more are taken when the system undergoes a rapid change. This type of behavior is observed in many systems such as Brusselator and FitzHugh–Nagumo. We illustrate that our framework maintains stable restarts, keeps fine-scale restart errors bounded by shadow errors, and reconstructs the time history with significantly lower error and storage than interpolating fixed-interval snapshots, with low-cost shadow replay and modest online synchronization overhead.

Gong, Qian [ORNL] (ORCID:0000000235704142)↗

Advanced Materials for Sodium-Beta Alumina Batteries: Status, Challenges and Perspectives

The increasing penetration of renewable energy and the trend toward clean, efficient transportation have spurred growing interests in sodium-beta alumina batteries that store electrical energy via sodium ion transport across a β"-Al2O3 solid electrolyte at elevated temperatures (typically 300~350°C). Currently, the negative electrode or anode is metallic sodium in molten state during battery operation; the positive electrode or cathode can be molten sulfur (Na-S battery) or solid transition metal halides plus a liquid phase secondary electrolyte (e.g., ZEBRA battery). Since the groundbreaking works in the sodium-beta alumina batteries a few decades ago, encouraging progress has been achieved in improving battery performance, along with cost reduction. However there remain issues that hinder broad applications and market penetration of the technologies. To better the Na-beta alumina technologies require further advancement in materials along with component and system design and engineering. This paper offers a comprehensive review on materials of electrodes and electrolytes for the Na-beta alumina batteries and discusses the challenges ahead for further technology improvement.

Lu, Xiaochuan↗

New FCC Mg–Zr and Mg–Zr–ti deuterides obtained by reactive milling

Results for binary Mg–Zr and ternary Mg–Zr–Ti mixtures ball milled at room temperature under reactive deuterium atmosphere (5.6–6.7 MPa) are reported. X-ray and neutron powder diffraction combined with Rietveld refinements show that two new cubic phases were formed during milling. Mg{sub 0.40}Zr{sub 0.60}D{sub 1.78} and Mg{sub 0.40}Zr{sub 0.26}Ti{sub 0.34}D{sub 1.98} crystallize with disordered face centered cubic metal atom arrangements. Results of differential scanning calorimetry and termogravimetric measurements demonstrate that both deuterides desorb deuterium at lower temperatures than MgD{sub 2}, ZrD{sub 2} or TiD{sub 2}; 528 and 575 K in the Mg–Zr–D and Mg–Zr–Ti–D system, respectively. Interestingly, Mg{sub 0.40}Zr{sub 0.26}Ti{sub 0.34}D{sub 1.98} stores deuterium reversibly at 673 K and 10 MPa of D{sub 2}. - Graphical abstract: High resolution SR-PXD patterns obtained for Mg{sub 0.40}Zr{sub 0.60}D{sub 1.78} and first time reported Mg{sub 0.40}Zr{sub 0.26}Ti{sub 0.34}D{sub 1.98}. - Highlights: • Synthesis and characterization of Mg{sub 0.40}Zr{sub 0.60}D{sub 1.78} and Mg{sub 0.40}Zr{sub 0.26}Ti{sub 0.34}D{sub 1.98}. • New deuterides obtained by milling under H{sub 2} gas pressure in the order of a few MPa. • Phases desorb deuterium at temperature lower than corresponding binary deuterides. • Mg{sub 0.40}Zr{sub 0.26}Ti{sub 0.34}D{sub 1.98} stores hydrogen reversibly at 673 K and 10 MPa of D{sub 2}.

36 MATERIALS SCIENCE↗

Effect of partial recrystallization on the grain size and grain boundary structure of austenitic steel

Cyclic thermomechanical treatment combined with caliber rolling was applied in order to obtain very fine grain structure with high fraction of special grain boundaries in austenitic stainless steel. Partial recrystallization was observed. Recrystallized fraction was assessed from misorientation data measured by electron back scattering diffraction. Due to the partial recrystallization, elastic energy was stored in the deformed parts, and helped grain boundary movement. As a consequence, very fine grained material with high fraction of special boundaries was formed. - Highlights: Black-Right-Pointing-Pointer I combined the advantage of severe plastic deformation and thermomechanical treatment. Black-Right-Pointing-Pointer A very fine grained steel with high fraction of special boundaries was formed. Black-Right-Pointing-Pointer Stored elastic energy hepled the movement of grain boundaries. Black-Right-Pointing-Pointer The amount of recrystallized part was determined by EBSD.

36 MATERIALS SCIENCE↗

Reinforcement of the Cube texture during recrystallization of a 1050 aluminum alloy partially recrystallized and 10% cold-rolled

In high purity Aluminum, very strong {l_brace}100{r_brace}<001> recrystallization texture is developed after 98% cold rolling and annealing at 500 Degree-Sign C. On the contrary, in Aluminum alloys of commercial purity, the Cube component hardly exceeds 30% after complete recrystallization. Parameters controlling Cube orientation development are mainly the solute dragging due to impurities in solid solution and the stored deformation energy. In the present study, besides the 85% cold rolling, two extra annealings and a slight cold rolling are introduced in the processing route to increase the Cube volume fraction. The Cube development was analyzed by X-ray diffraction and Electron BackScattered Diffraction (EBSD). The nucleation and growth mechanisms responsible for the large Cube growth were investigated using FEG/EBSD in-situ heating experiments. Continuous recrystallization was observed in Cube oriented grains and competed with SIBM (Strain Induced Boundary Migration) mechanism. This latter was favored by the stored energy gap introduced during the additional cold-rolling between the Cube grains and their neighbors. Finally, a Cube volume fraction of 65% was reached after final recrystallization. - Highlights: Black-Right-Pointing-Pointer EBSD in-situ heating experiments of aluminum alloy of commercial purity. Black-Right-Pointing-Pointer A 10% cold-rolling after a partial recrystallization improved Cube nucleation and growth. Black-Right-Pointing-Pointer Annealing before cold-rolling limited the solute drag effect and permitted a large Cube growth. Black-Right-Pointing-Pointer Cube development is enhanced by continuous recrystallization of Cube sub-grains. Black-Right-Pointing-Pointer The preferential Cube growth occurs by SIBM of small Cube grains.

36 MATERIALS SCIENCE↗

Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties

A novel quenching and partitioning process (Q&P) including the hot stamping (HS) process was studied, using two stamping temperatures (750 °C and 800 °C) and two quenching temperatures (318 °C and 328 °C). This combination is here called Hot Stamping and Quenching and Partitioning process (HSQ&P). The partitioning step was performed at 400 °C for 100 s in all cycles. Microstructural features were comprehensively studied using electron backscattered diffraction and nanoindentation techniques. HSQ&P samples showed a good combination of ductility and high-strength due to the presence of: retained austenite, inter-critical ferrite with low stored internal strain energy, grain refinement via DIFT-effect (deformation induced ferrite transformation), martensite, and bainite. Significant internal stress relief was caused by carbon partitioning, which was induced by the DIFT-effect and the partitioning stage. This also led to a considerable stored energy, which was characterized by the Kernel average dislocation and geometrically necessary dislocation analysis. In addition, predominant {110}//strain direction crystallographic texture was identified, which promotes slip deformation and enhances the mechanical properties. Moreover, remarkable amounts of fine film-like retained austenite oriented along compact crystallographic directions (i.e., $\langle$111$\rangle$ and $\langle$112$\rangle$) were observed. Finally, subsize tensile test verified the optimum mechanical behavior of HSQ&P specimens.

36 MATERIALS SCIENCE↗

Investigation of carbon-coated lithiated Li{sub 4+x}Ti{sub 5}O{sub 12}/C for lithium-ion batteries

Highlights: • Lithiated Li{sub 4+x}Ti{sub 5}O{sub 12}/C with pre-stored active Li ions has been synthesized. • The first-cycle coulombic efficiency of Li{sub 4+x}Ti{sub 5}O{sub 12}/C is over 100%. • Li{sub 4+x}Ti{sub 5}O{sub 12}/C displays excellent cyclic stability and capacity retention. • TiO{sub 2} nanoparticles and carbon coating are necessary for formation of Li{sub 4+x}Ti{sub 5}O{sub 12}/C. - Abstract: Carbon-coated Li{sub 4}Ti{sub 5}O{sub 12} and lithiated Li{sub 4+x}Ti{sub 5}O{sub 12} anode materials have been synthesized using nanosized anatase TiO{sub 2} and commercial TiO{sub 2} with mixed structure as Ti sources, respectively. Microstructural investigation indicates that Li{sub 4}Ti{sub 5}O{sub 12} and Li{sub 4+x}Ti{sub 5}O{sub 12} are covered by amorphous carbon layers with thickness of 2–3 nm. Their electrochemical performance has been evaluated, which indicates that an amount of active Li ions have been pre-stored in the Li{sub 4+x}Ti{sub 5}O{sub 12} lattice during solid-state synthesis, resulting in its first-cycle coulombic efficiency over 100%. Further, Li{sub 4+x}Ti{sub 5}O{sub 12}/C exhibits higher cyclic capacities than Li{sub 4}Ti{sub 5}O{sub 12}/C at different current density. The reversible charge capacity retention of Li{sub 4+x}Ti{sub 5}O{sub 12}/C reaches 98.5% after 100 cycles, which indicates that Li{sub 4+x}Ti{sub 5}O{sub 12}/C is promising candidate anode material for long lifetime lithium-ion batteries. The formation mechanism of Li{sub 4+x}Ti{sub 5}O{sub 12}/C has been discussed, in which the nanosized anatase TiO{sub 2} with high chemical activity and the carbon coating play key roles for the formation of Li{sub 4+x}Ti{sub 5}O{sub 12}/C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoparticles-constructed spinel ZnFe2O4 anode material with superior lithium storage performance boosted by pseudocapacitance

Highlights: • Nanoparticles-constructed ZnFe{sub 2}O{sub 4} was fabricated by co-precipitation method. • The ZnFe{sub 2}O{sub 4} sample shows excellent high rate capability and cycling stability. • The lithium storage mechanism was analyzed by CV and EIS measurements. • Pseudocapacitive effect has a significant contribution to the total stored charge. - Abstract: The practical application of ZnFe{sub 2}O{sub 4} in lithium ion batteries (LIBs) is severely hampered by its fast capacity fading and poor rate performance. To overcome these issues, herein, ZnFe{sub 2}O{sub 4} powders consist of aggregated nanoparticles (50∼100 nm) with porosity were prepared by a facile co-precipitation method and subsequent thermal decomposition. When used as anode material for LIBs, the ZnFe{sub 2}O{sub 4} sample delivers capacities of 920, 820, 650, 485, and 421 mA h g{sup −1} at current densities of 0.5, 1, 3, 7, and 10 A g{sup −1}, respectively. Moreover, the sample can maintain a capacity of 814 mA h g{sup −1} even after 300 cycles at the current density of 1 A g{sup −1}, implying an excellent rate capability and cycling stability. Cyclic voltammetry analysis reveals that both diffusion-controlled lithium storage and surface pseudocapacitive lithium storage contribute to the total stored charge of ZnFe{sub 2}O{sub 4}, which boosts the high rate capability and superior cycling stability of the ZnFe{sub 2}O{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Field Simulations of Elastic Deformation-Driven Grain Growth in 2D Copper Polycrystals

In this work, a phase field grain growth model coupled with a spectral stress calculation method is used to investigate the effect of applied elastic deformation on grain growth in 2D copper polycrystals with isotropic grain boundary properties. The applied deformation accelerates the grain growth compared to a relaxed polycrystal, though the effect of the deformation decreases rapidly with time. The softest grain orientations with respect to the applied deformation grow at the expense of other orientations, though they have higher elastic energy density. Due to a rapid decrease in the elastic energy stored in the system, the GB energy eventually dominates the growth leading to a linear change in the average grain area with time. Increasing the magnitude of the applied deformation accelerates the growth, while increasing the temperature accelerates the growth but decreases the effect of the applied deformation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of composition and morphology on the hydrogen storage properties of transition metal hydrides: Insights from PtPd nanoclusters

Transition metal hydride nanoparticles are promising hydrogen storage materials as they store and release hydrogen at near-ambient conditions. Their storage capacities can be modulated by adjusting their size, shape, morphology, and composition. It is however unclear why these factors influence hydrogen storage properties. Here, we present a first-principles study on six 55-atom PtPd nanoclusters to elucidate the effects of nanoparticle morphology and composition on the hydrogen storage characteristics of small nanoclusters. We employ the cluster expansion methodology to analyze how the spatial distribution and energetics of hydrogen adsorption and absorption evolve as a function of hydrogen loading. Our results reveal that at near-ambient pressures and above, hydrogen is actively stored in both the surface—top sites on Pt, and bridge sites on Pd—and the subsurface. The hydrogen storage capacity is controlled by the binding strength of hydrogen, itself influenced by two factors: i) the interaction energy between hydrogen atoms, which dictates how binding strength varies with increasing loading; and ii) the intrinsic binding affinity of a metal cluster for hydrogen, which dictates the magnitude of the nearly-uniform offsets in binding strength across all hydrogen loadings. Bimetallic clusters with alloyed shells and core-shell morphologies modulate these factors by tuning the distribution of hydrogen binding strengths on the surface and subsurface respectively. We shed light on the factors that affect hydrogen storage in clusters and provide insights for the rational design of metal clusters with maximal hydrogen storage capacities.

08 HYDROGEN↗

RIPL - Reference Input Parameter Library for Calculation of Nuclear Reactions and Nuclear Data Evaluations

We describe the physics and data included in the Reference Input Parameter Library, which is devoted to input parameters needed in calculations of nuclear reactions and nuclear data evaluations. Advanced modelling codes require substantial numerical input, therefore the International Atomic Energy Agency (IAEA) has worked extensively since 1993 on a library of validated nuclear-model input parameters, referred to as the Reference Input Parameter Library (RIPL). A final RIPL coordinated research project (RIPL-3) was brought to a successful conclusion in December 2008, after 15 years of challenging work carried out through three consecutive IAEA projects. The RIPL-3 library was released in January 2009, and is available on the Web through (http://www-nds.iaea.org/RIPL-3/). This work and the resulting database are extremely important to theoreticians involved in the development and use of nuclear reaction modelling (ALICE, EMPIRE, GNASH, UNF, TALYS) both for theoretical research and nuclear data evaluations. The numerical data and computer codes included in RIPL-3 are arranged in seven segments: MASSES contains ground-state properties of nuclei for about 9000 nuclei, including three theoretical predictions of masses and the evaluated experimental masses of Audi et al. (2003). DISCRETE LEVELS contains 117 datasets (one for each element) with all known level schemes, electromagnetic and {gamma}-ray decay probabilities available from ENSDF in October 2007. NEUTRON RESONANCES contains average resonance parameters prepared on the basis of the evaluations performed by Ignatyuk and Mughabghab. OPTICAL MODEL contains 495 sets of phenomenological optical model parameters defined in a wide energy range. When there are insufficient experimental data, the evaluator has to resort to either global parameterizations or microscopic approaches. Radial density distributions to be used as input for microscopic calculations are stored in the MASSES segment. LEVEL DENSITIES contains phenomenological parameterizations based on the modified Fermi gas and superfluid models and microscopic calculations which are based on a realistic microscopic single-particle level scheme. Partial level densities formulae are also recommended. All tabulated total level densities are consistent with both the recommended average neutron resonance parameters and discrete levels. GAMMA contains parameters that quantify giant resonances, experimental gamma-ray strength functions and methods for calculating gamma emission in statistical model codes. The experimental GDR parameters are represented by Lorentzian fits to the photo-absorption cross sections for 102 nuclides ranging from {sup 51}V to {sup 239}Pu. FISSION includes global prescriptions for fission barriers and nuclear level densities at fission saddle points based on microscopic HFB calculations constrained by experimental fission cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Developments of the EXFOR Database: Possible New Formats

The EXFOR database is a collection of experimental nuclear reaction data, maintained by the IAEA on behalf of the International Network of Nuclear Reaction Data Centres (NRDC). The format for the storage of such data was first described in 1969 and while there have been many incremental changes over the years so that the format is now capable of containing a very wide range of measurement results, there is a growing realisation that a major change is required. Consequently the IAEA Nuclear Data Section (NDS) organised a Consultant's Meeting on ‘Further Development of EXFOR’ in 2012. This was an opportunity for a range of international experts to discuss ways of improving EXFOR and while this focused on new formats there was also discussion on ways of storing new data, new output formats and software tools such as editors. This paper will discuss recent and proposed changes to enable new quantities to be stored (such as coincidence measurements and covariances), the range of output formats available (e.g. C4 and X4+) which make interaction with the data more user friendly and the possible use of XML to modernise the database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Covariances in the Generalized Nuclear Data (GND) Structure

The Generalized Nuclear Data structure (GND) is being designed as a new standard for storing evaluated nuclear data. It is intended as an eventual replacement for the ENDF-6 format, and as such must be capable of handling at a minimum all the types of data supported by ENDF-6, including central values and covariances. Containers for storing covariances in GND are being developed, with the goal of representing covariance data in a simple and concise manner, that is easy to read, understand and use. This paper presents an overview of the status of covariances in GND, and on the tools for generating and using covariance data that are being implemented in LLNL's nuclear data toolkit ‘Fudge’.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Stand-alone and Network Capable Pocket Radiation Detection System

A multi-functional and networked pocket radiation detection system has been developed at the Idaho National Laboratory (INL) capable of detecting and storing gamma ray and neutron data. The device can be used as a stand-alone device or in conjunction with an array to cover a small or large area. The device has programmable alarm trigger levels that can be modified for specific applications. The data is stored with a date/time stamp and can be transferred and viewed on a PDA via direct connection or, in networked configuration, wireless connection to a remote central facility upon request. Data functional/bench tests have been completed successfully and the device was demonstrated to detect radiation from a 55.6 uCi Cf-252 source at 5 meters and from 1.4 mCi Cf-252 source at 10 meters which exceeds both ANSI and IAEA standards for pocket radiation detection. In terms of sensitivity, this detection system detects neutron and gamma-ray fields down to 10 micro rem/hr levels and therefore can find the location of the radioactive source quickly. The detection system is small enough to be put in a pocket or clipped to a belt.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Imaging for dismantlement verification: information management and analysis algorithms

The level of detail discernible in imaging techniques has generally excluded them from consideration as verification tools in inspection regimes. An image will almost certainly contain highly sensitive information, and storing a comparison image will almost certainly violate a cardinal principle of information barriers: that no sensitive information be stored in the system. To overcome this problem, some features of the image might be reduced to a few parameters suitable for definition as an attribute, which must be non-sensitive to be acceptable in an Information Barrier regime. However, this process must be performed with care. Features like the perimeter, area, and intensity of an object, for example, might reveal sensitive information. Any data-reduction technique must provide sufficient information to discriminate a real object from a spoofed or incorrect one, while avoiding disclosure (or storage) of any sensitive object qualities. Ultimately, algorithms are intended to provide only a yes/no response verifying the presence of features in the image. We discuss the utility of imaging for arms control applications and present three image-based verification algorithms in this context. The algorithms reduce full image information to non-sensitive feature information, in a process that is intended to enable verification while eliminating the possibility of image reconstruction. The underlying images can be highly detailed, since they are dynamically generated behind an information barrier. We consider the use of active (conventional) radiography alone and in tandem with passive (auto) radiography. We study these algorithms in terms of technical performance in image analysis and application to an information barrier scheme.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗