Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Convolution seal for transition duct in turbine system

A turbine system is disclosed. In one embodiment, the turbine system includes a transition duct. The transition duct includes an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The transition duct further includes an interface member for interfacing with a turbine section. The turbine system further includes a convolution seal contacting the interface member to provide a seal between the interface member and the turbine section.

42 ENGINEERING↗

Convolution seal for transition duct in turbine system

A turbine system is disclosed. In one embodiment, the turbine system includes a transition duct. The transition duct includes an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The transition duct further includes an interface feature for interfacing with an adjacent transition duct. The turbine system further includes a convolution seal contacting the interface feature to provide a seal between the interface feature and the adjacent transition duct.

33 ADVANCED PROPULSION SYSTEMS↗

Technology Solutions Case Study: Sealed Air-Return Plenum Retrofit

In this project, Pacific Northwest National Laboratory researchers greatly improved indoor air quality and HVAC performance by replacing an old, leaky air handler with a new air handler with an air-sealed return plenum with filter; they also sealed the ducts, and added a fresh air intake.

air handler↗

High temperature sealed electrochemical cell

A cell for high temperature electrochemical reactions is provided. The cell includes a container, at least a portion of the container acting as a first electrode. An extension tube has a first end and a second end, the extension tube coupled to the container at the second end forming a conduit from the container to said first end. A second electrode is positioned in the container and extends out of the container via the conduit. A seal is positioned proximate the first end of the extension tube, for sealing the cell.

30 DIRECT ENERGY CONVERSION↗

Method for sealing an oxygen transport membrane assembly

An improved method of sealing a ceramic part to a solid part made of ceramic, metal, cermet or a ceramic coated metal is provided. The improved method includes placing a bond agent comprising an Al 2 O 3 and SiO 2 based glass-ceramic material and organic binder material on adjoining surfaces of the ceramic part and the solid part. The assembly is heated to a first target temperature that removes or dissolves the organic binder material from the bond agent and the assembly is subjected to a second induction heating step at a temperature ramp rate of between about 100.degree. C. and 200.degree. C. per minute to temperatures where the glass-ceramic material flows and wets the interface between adjoining surfaces. The assembly is rapidly cooled at a cooling rate of about 140.degree. C. per minute or more to induce nucleation and re-crystallization of the glass-ceramic material to form a dense, durable and gas-tight seal.

36 MATERIALS SCIENCE↗

High temperature seal compositions and methods of using same

The disclosure relates to sealant compositions for forming hermetic seals, methods of use, and hermetically sealed products. The sealant compositions comprise a first inorganic oxide chosen from at least one of MgSiO.sub.3, MgO, MgTiO.sub.3, CaO, and CaSiO.sub.3, a second inorganic oxide chosen from SiO.sub.2, at least one solvent, and optionally at least one organic resin binder.

36 MATERIALS SCIENCE↗

Methods for sealing, detection and marking leaks in structural enclosures

A system and method for detecting, marking and/or sealing building envelope leaks in buildings or any enclosed structure. Fogs of aerosolized sealant particles that have a surface tackiness that diminishes over time are introduced into the interior of prepared rooms. The surface properties of the aerosol particles can be controlled with the selection of sealant composition, including the presence and concentration of solvents, the range of produced particle sizes, and the relative humidity and temperature within the enclosure. A pressure differential is created and the micron scale particles adhere to the leak edges and to other particles as they are brought to the leaks and then leave the gas streamlines. Control of particle size, drying rate and particle residence time in the building interior allows control over the treatment area so that leaks are sealed without leaving a tacky residue.

42 ENGINEERING↗

Composite wellbore seal system with sensing and self-healing capabilities

The present invention provides a self-healing wellbore seal system comprising a casing, a fiber reinforced polymer layer, and layer of polymer cement. The layers are bonded together and configured to create a low permeable and ductile seal at discrete locations of the wellbore or along the wellbore. The polymer layer may be chemically bonded to the casing and inhibits the formation of a microannulus at the casing. The polymer layer may be an aramid fiber reinforced polymer, a fiber reinforced polymer layer, or a glass reinforced polymer layer.

Taha, Mahmoud Reda↗

Shrouded seal assembly

A seal assembly is provided that includes a protective shroud to protect a sealing element from hazardous elements and/or a hazardous environment.

Dunlap, Jr., Patrick H.↗

Thermionic cathode with a graphene sealing layer and method of making the same

According to an embodiment of the present disclosure, a thermionic cathode includes: a cathode body having an outer surface, and a sealing layer including one or more graphene sheets on the outer surface of the cathode body. According to another embodiment of the present disclosure, a method for manufacturing a thermionic cathode includes: depositing a sealing layer including one or more graphene sheets on an outer surface of a cathode body.

42 ENGINEERING↗

Self-sealing container for protecting air sensitive samples

A self-sealing container, used for transferring one or more air sensitive samples between vacuum systems, includes a housing with a cavity that holds the sample(s), and a lid disposed on top of the housing. The lid is configured to interface with the housing to form a seal over the cavity when the lid is closed. At least two flexure systems, each coupled to the housing and the lid, are disposed on opposing sides of the housing. The flexure systems apply forces to the lid that move the lid horizontally and vertically above the housing, into an open position. A pneumatic actuator, movably coupled to the housing and the lid, that is actuated by a change in ambient pressure. When actuated, it applies forces that move the lid horizontally and vertically to the closed position, in opposition to and in excess of the forces applied by the flexure systems.

42 ENGINEERING↗

Duct Insulation and Sealing Requirements in Commercial Buildings - Code Notes

Duct insulation and sealing, especially insulated supply ducts delivering conditioned air within a building, save energy. The intent of energy-efficiency codes, as related to duct insulation and sealing, is to keep mechanically warmed or cooled air as close to a constant, desired temperature as possible and prevent the conditioned air from escaping the duct system while it is being moved to spaces where it is needed. If reduced heat transfer through insulated ducts is accounted for in the heating, ventilating, and air conditioning (HVAC) load calculations, it may even be possible to reduce the size of HVAC equipment.

Duct systems, thermal envelope, conditioned air, H↗

Measured moisture performance of sealed and insulated attics with permeable insulation in california homes

This study performed detailed thermal and moisture measurements in two homes in Fresno and Clovis, California with sealed attics insulated with glass fiber insulation to determine moisture performance in inland California climates. Data were recorded once every minute for more than a year in each home to allow detailed observation of time-varying moisture and thermal conditions. Moisture measurements were taken at multiple locations in each attic and included wood moisture, surface condensation and surface relative humidity. The results showed that there are strong solar-driven diurnal cycles in attic wood and air moisture content, as well as longer-term seasonal and annual variations. Mold growth was obdserved on the North roof deck in one of the two homes even in this sunny dry climate with attics built in compliance with California building codes that specifically address sealed and insulated attics with vapor-permeable insulation. We investigated moisture stratification in the attic and found that, although there is stratification during sunny daytime hours, this was not when wood moisture content, surface humidity or surface condensation are high. Therefore, other moisture transport mechanisms are acting to increase moisture levels near the roof peak. Finally, our measurements also showed that the attic with the highest measured moisture levels did not have any mold growth, while mold was visually observed in the attic whose measurements indicted little or no concern, indicating that the state-of-the-art in moisture measurement and mold growth prediction in building assemblies may be insufficient.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Measured Moisture Performance of Sealed and Insulated Attics with Permeable Insulation In California Homes

This study performed detailed thermal and moisture measurements in two homes in Fresno and Clovis, California with sealed attics insulated with glass fiber insulation to determine moisture performance in inland California climates. Data were recorded once every minute for more than a year in each home to allow detailed observation of time-varying moisture and thermal conditions. Moisture measurements were taken at multiple locations in each attic and included wood moisture, surface condensation and surface relative humidity. The results showed that there are strong solar-driven diurnal cycles in attic wood and air moisture content, as well as longer-term seasonal and annual variations. Mold growth was obdserved on the North roof deck in one of the two homes even in this sunny dry climate with attics built in compliance with California building codes that specifically address sealed and insulated attics with vapor-permeable insulation. We investigated moisture stratification in the attic and found that, although there is stratification during sunny daytime hours, this was not when wood moisture content, surface humidity or surface condensation are high. Therefore, other moisture transport mechanisms are acting to increase moisture levels near the roof peak. Finally, our measurements also showed that the attic with the highest measured moisture levels did not have any mold growth, while mold was visually observed in the attic whose measurements indicted little or no concern, indicating that the state-of-the-art in moisture measurement and mold growth prediction in building assemblies may be insufficient.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Method for sealing a void in a well using a smart gel sealant

Embodiments of the disclosure include swellable smart gel sealants. In certain embodiments, the smart gel sealants reversibly swell when exposed to a certain trigger, such as temperature or pH. In specific embodiments, the smart gel is disposed within voids in a well and triggered to swell in order to seal the voids. One application of the smart gel sealant is to seal the casing of a well against the leakage of gas, such as CO2.

Goodman, Harvey Edwin↗

Seal assembly for a rotary machine

A seal assembly of a rotary includes a radially oriented plate that axially opposes a front and rear support plates of a stator interface. The seal assembly also includes a film-riding shoe coupled with the radially oriented plate. The shoe forms a shoe fluid bearing between the shoe and a rotating component responsive to rotation of the rotating component and pressurization of fluid in the rotary machine upstream of the stator interface. One or more of the stator interface or the film-riding shoe includes one or more ports or pathways through which higher-pressure fluid upstream of the stator housing in the rotary machine flows to form an aft axial fluid bearing between the radially oriented plate and the rear support plate of the stator interface.

Bidkar, Rahul Anil↗

Method for sealing a void in a well using smart gels

Embodiments of the disclosure include swellable smart gel sealants and methods of using smart gel sealants. In certain embodiments, the smart gel sealants reversibly swell when exposed to a certain trigger, such as temperature or pH. In specific embodiments, the smart gel is disposed within voids in a well and triggered to swell in order to seal the voids. One application of the smart gel sealant is to seal the casing of a well against the leakage of gas, such as H2S.

Roback, Robert Clifford↗

Control of vacuum induction brazing system for sealing of instrumentation feed-through

The integrity of instrumentation cables is an important performance parameter in addition to the sealing performance in the brazing process. An accurate brazing control was developed for the brazing of the instrumentation feed-through in the vacuum induction brazing system in this paper. The experimental results show that the accurate brazing temperature control performance is achieved by the developed control scheme. Consequently, the sealing performances of the instrumentation feed-through and the integrities of the instrumentation cables were satisfied after brazing. (authors)

42 ENGINEERING↗