Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Impact Behavior of Composite Fan Blade Leading Edge Subcomponent with Thermoplastic Polyurethane Interleave

Impact damage tolerance and damage resistance is a critical metric for application of polymer matrix composites where failure caused by impact damage could compromise structural performance and safety. As a result, several materials and/or design approaches to improve impact damage tolerance have been investigated over the past several decades. Many composite toughening methodologies impart a trade-off between increased fracture toughness and compromised in-plane strength and modulus. In large part, mechanical tests to evaluate composite damage tolerance include static methods such as Mode I, Mode II, and mixed mode failures. However, ballistic impact damage resistance does not always correlate with static properties. The intent of this paper is to evaluate the influence of a thermoplastic polyurethane veil interleave on the static and dynamic performance of composite test articles. Static coupon tests included tension, compression, double cantilever beam, and end notch flexure. Measurement of the resistance to ballistic impact damage were made to evaluate the composites response to high speed impact. The interlayer material showed a decrease of in-plane performance with only a moderate improvement to Mode I and Mode II fracture toughness. However, significant benefit to impact damage tolerance was observed through ballistic tests.

Damage Tolerance↗

Upper limit on the magnetic dipole contribution to the 5p-8p transition in Rb by use of ultracold atom spectroscopy

We report on hyperfine-resolved spectroscopic measurements of the electric-dipole-forbidden 5p{sub 3/2}->8p{sub 1/2} transition in a sample of ultracold {sup 87}Rb atoms. The hyperfine selection rules enable the weak magnetic dipole (M1) contribution to the transition strength to be distinguished from the much stronger electric quadrupole (E2) contribution. An upper limit on the M1 transition strength is determined that is about 50 times smaller than an earlier experimental determination. We also calculate the expected value of the M1 matrix element and find that it is less than the upper limit extracted from the experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗

HANLE EFFECT FOR STELLAR DIPOLES AND QUADRUPOLES

We derive exact expressions for the degree of lineal polarization over a resolved or integrated stellar disc due to resonance scattering and the Hanle effect from a dipolar or quadrupolar distribution of magnetic fields. We apply the theory of scattering polarization within the formalism of the spherical tensors representation for the density matrix and radiation field. The distribution of linear polarization over the stellar disk for different configurations of the magnetic field is studied and its topology discussed. For an unresolved dipole, the resulting polarization can be expressed in terms of just three functions (of the inclination angle and effective dipole strength) that are calculated numerically and their behavior discussed. Dipolar and (aligned) quadrupoles are considered in some detail, but the techniques here-in particular, the extensive use of the spherical tensor formalism for polarization-can easily be applied to more general field configurations.

79 ASTRONOMY AND ASTROPHYSICS↗

Minimal seesaw textures with two heavy neutrinos

We systematically analyze the Dirac and the Majorana mass matrices in seesaw models with two heavy right-handed neutrinos. We perform thorough classification of the vanishing matrix elements which are compatible with the results from the current neutrino oscillation experiments. We include the possibility of a nondiagonal Majorana mass matrix which leads to new solutions viable with data. In a basis where the Majorana mass matrix is diagonal, these solutions imply a Dirac matrix with specific relationships amongst its elements. We find that at the level of total four zeros together in m{sub D} and M{sub R} the mass matrices are almost consistent with the data but one mixing angle is predicted to be unsuitable. At the next level, i.e. with total three zeros, only seven patterns of mass matrices describe the experimental data well. The seven solutions have testable predictions for the future neutrino experiments. In particular, each solution has definite predictions about the observation of the 1-3 leptonic mixing angle and the effective mass measured in neutrinoless double beta decay. The solutions of the mass matrices contain novel texture forms and provide new insights into the lepton-generation structure. We also discuss possible connections between these textures and the tri-bimaximal mixing to search for symmetry principles behind the mass matrix structure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self- and Air-Broadened Line Shapes in the 2v3 P and R Branches of 12CH4

In this paper we report line shape parameters of 12CH4 for several hundred 2V(sub 3) transitions in the spectral regions 5891-5996 cm( exp -1) (P branch) and 6015-6115 cm(exp -1) (R branch). Air- and self-broadening coefficients were measured as a function of temperature; line mixing via off-diagonal relaxation matrix element coefficients was also obtained for 47 transition pairs. In total, nearly 1517 positions and intensities were retrieved, but many transitions were too weak for the line shape study. For this analysis, we used 25 high-resolution (0.0056 and 0.0067 cm(ex[ -1) and high signal-to-noise (S/N) spectra of high-purity 12CH4 and the same high-purity 12CH4 broadened by dry air recorded at different sample temperatures between 130 K and 295 K with the Bruker IFS 125HR Fourier transform spectrometer at JPL. Three different absorption cells were used (1) a White cell set to a path length of 13.09 m for room temperature data, (2) a single-pass 0.2038 m long coolable cell (for self-broadening) and (3) a multipass cell with 20.941 m total path coolable Herriott cell (for air-broadening). In total there were 13 spectra with pure 12CH4 (0.27-599 Torr) and 12 air-broadened spectra with total sample pressures of 80-805 Torr and volume mixing ratios (VMR) of methane between 0.18 and 1.0. An interactive multispectrum nonlinear least-squares technique was employed to fit the individual P10-P1 and R0-R10 manifolds in all the spectra simultaneously. Results obtained from the present analysis are compared to other recent measurements.

Devi, V. Malathy↗

Time Evolution with the DMRG Algorithm: A Generic Implementation for Strongly Correlated Electronic Systems

A detailed description of the time-step-targeting time evolution method within the density-matrix renormalization-group algorithm is presented. The focus of this publication is on the implementation of the algorithm and its generic application. The case of one-site excitations within a Hubbard model is analyzed as a test for the algorithm, using open chains and two-leg ladder geometries. The accuracy of the procedure in the case of the recently discussed holon-doublon photo excitations of Mott insulators is also analyzed. Performance and parallelization issues are discussed. In addition, the full open-source code is provided as supplementary material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New Developments in MadGraph/MadEvent

We here present some recent developments of MadGraph/MadEvent since the latest published version, 4.0. These developments include: Jet matching with Pythia parton showers for both Standard Model and Beyond the Standard Model processes, decay chain functionality, decay width calculation and decay simulation, process generation for the Grid, a package for calculation of quarkonium amplitudes, calculation of Matrix Element weights for experimental events, automatic dipole subtraction for next-to-leading order calculations, and a package for automatic calculation of Feynman rules and model files from the Lagrangian of any New Physics model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Off-shell single-top production at NLO matched to parton showers

We study the hadroproduction of a Wb pair in association with a light jet, focusing on the dominant t-channel contribution and including exactly at the matrix-element level all non-resonant and off-shell effects induced by the finite top-quark width. Our simulations are accurate to the next-to-leading order in QCD, and are matched to the Herwig6 and Pythia8 parton showers through the MC@NLO method. We present phenomenological results relevant to the 8 TeV LHC, and carry out a thorough comparison to the case of on-shell t-channel single-top production. Furthermore, we formulate our approach so that it can be applied to the general case of matrix elements that feature coloured intermediate resonances and are matched to parton showers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Curvature-Augmented Closest Point method with vesicle inextensibility application

Here, the Closest Point method, initially developed by Ruuth and Merriman, allows for the numerical solution of surface partial differential equations without the need for a parameterization of the surface itself. Surface quantities are embedded into the surrounding domain by assigning each value at a given spatial location to the corresponding value at the closest point on the surface. This embedding allows for surface derivatives to be replaced by their Cartesian counterparts (e.g. ∇ s =∇). This equivalence is only valid on the surface, and thus, interpolation is used to enforce what is known as the side condition away from the surface. To improve upon the method, this work derives an operator embedding that incorporates curvature information, making it valid in a neighborhood of the surface. With this, direct enforcement of the side condition is no longer needed. Comparisons in R 2 and R 3 show that the resulting Curvature-Augmented Closest Point method has better accuracy and requires less memory, through increased matrix sparsity, than the Closest Point method, while maintaining similar matrix condition numbers. To demonstrate the utility of the method in a physical application, simulations of inextensible, bi-lipid vesicles evolving toward equilibrium shapes are also included.

97 MATHEMATICS AND COMPUTING↗

Strong light-matter coupling in bulk GaN-microcavities with double dielectric mirrors fabricated by two different methods

Two routes for the fabrication of bulk GaN microcavities embedded between two dielectric mirrors are described, and the optical properties of the microcavities thus obtained are compared. In both cases, the GaN active layer is grown by molecular beam epitaxy on (111) Si, allowing use of selective etching to remove the substrate. In the first case, a three period Al{sub 0.2}Ga{sub 0.8}N/AlN Bragg mirror followed by a {lambda}/2 GaN cavity are grown directly on the Si. In the second case, a crack-free 2 {mu}m thick GaN layer is grown, and progressively thinned to a final thickness of {lambda}. Both devices work in the strong coupling regime at low temperature, as evidenced by angle-dependent reflectivity or transmission experiments. However, strong light-matter coupling in emission at room temperature is observed only for the second one. This is related to the poor optoelectronic quality of the active layer of the first device, due to its growth only 250 nm above the Si substrate and its related high defect density. The reflectivity spectra of the microcavities are well accounted for by using transfer matrix calculations.

36 MATERIALS SCIENCE↗

Where Does Water Go During Hydraulic Fracturing?

Typically, during hydraulic fracturing millions of gallons of water are injected at high pressure into deep shale formations. This water can be housed in fractures, within the shale matrix, and can potentially migrate beyond the shale formation via fractures and/or faults raising environmental concerns. Here, we describe a generic framework for producing estimates of the volume available in fractures and undamaged shale matrix where water injected into a representative shale site could reside during hydraulic fracturing, and apply it to a representative site that incorporates available field data. Moreover, the amount of water that can be stored in the fractures is estimated by calculating the volume of all the fractures associated with a discrete fracture network (DFN) based on real data and using probability theory to estimate the volume of smaller fractures that are below the lower cutoff for the fracture radius in the DFN. The amount of water stored in the matrix is estimated utilizing two distinct methods—one using a two-phase model at the pore-scale and the other using a single-phase model at the continuum scale. Based on these calculations, it appears that most of the water resides in the matrix with a lesser amount in the fractures.

58 GEOSCIENCES↗

Ductile-Phase Toughened Tungsten for Plasma Facing Materials (Final Report)

Tungsten (W) and W-alloys are the leading candidates for plasma-facing components in nuclear fusion reactors because of their high melting point, high temperature strength, good thermal conductivity and low sputtering yield, however, they are too brittle to serve a structural function. A variety of processing approaches were employed to fabricate ductile-phase-toughened (DPT) tungsten (W) composites, that includes consolidating elemental W powder with Cu- or WC-coated W-wires via spark plasma sintering (SPS). Laminated W-composites with Cu-foils were also fabricated by hot-pressing or brazing. Mechanical testing and analytical modeling were used to guide composite development. The fracture toughness of thin W plate or laminated W-composites was measured in three-point bending (3PB) at room temperature (RT). Crack arrest and crack bridging were observed for the laminated composites, and fracture resistance curves were successfully calculated. An analytical model of crack bridging was developed using the specimen geometry, matrix properties, and the stress-displacement function of a ductile reinforcement (“bridging law”) to calculate the fracture resistance curve (R-curve) and load-displacement curve (P-D curve) for any test specimen geometry. The code was also implemented to estimate the bridging law of an arbitrary composite using R-curve data. In another approach, commercially available liquid-phase sintered W alloys with four different compositions were characterized in terms of microstructure, tensile and fracture toughness at different specimen, size, geometry and testing temperatures. The room temperature (RT) average maximum load fracture toughness values (KIc or KJm ≈ 38 to 107 MPa√m) of WHA, containing only 3 to 10 wt.% of a NiFe-based ductile phase (DP), are ≈ 5 to 13 times higher than for monolithic W (≈ 8 MPa√m). Most RT tests show extensive stable ductile tearing (DT) at all W contents, including 97W (KJm ≈ 69 MPa√m), for small baseline bend bars (B=1.65mm, W=2B). Exceptions to DT, include RT elastic fracture at 97W observed in 3x larger specimens than the baseline specimens. However, the WHA KIc was still almost 5 times higher than that for monolithic W. The other exception to RT ductile tearing was for some of the 6 to 8x larger 95W alloy specimens that contained large ceramic initiating inclusions at the precrack front, along with lower DP%, with a KIc ≈ 59 MPa√m, compare to their stable DT KJm ≈ 82 MPa√m. Small specimen tests down to -196°C, to partially emulate irradiation hardening, also transition to elastic fracture at a temperature (-150 for 90W to -25ºC for 97W) that depends on the W content. However, even at -196°C, the KIc at 97W is ≈ 3 times that of monolithic W at RT. In contrast to classical ductile phase toughening by macrocrack bridging, WHA toughening mainly involves new mechanisms associated with arrest, blunting and bridging of numerous process zone microcracks. Later, these WHAs were used to fabricate W-WHA hybrid composites by coating elemental W powder on WHA using SPS. Three-point bend bars were fabricated and fracture toughness was tested at room temperature. Crack initiated and propagated from W-part to the WHA part for the well-bonded (interface) W-WHA composites for 90 and 92.5WHAs, however, crack arrested and diverted at/or through the interface for loosely bonded W-95/97WHAs with increasing load.

36 MATERIALS SCIENCE↗

Controlled Reaction Dynamics of Binary Hexafluorides to Explore New Chemical Signatures

Conclusions • Successfully halted the UF6 hydrolysis reaction and trapped intermediate complexes • Simple alcohol instead of water leads to shifting of bands in UF6 likely from change in matrix effects • MoF6 reaction shows some potential for methyl group being present in structure of intermediates • Future work with bulkier R-groups will hopefully reveal further information as to the reaction pathway and intermediate structure via kinetics and peak shifting

Dorris, Austin L. [Savannah River National Laborat↗

A New Route to Improve the Material Quality of Nb3Sn with Zr Inclusion

Nb3Sn superconducting material promises significant potential to exceed the performance of niobium based superconducting radio frequency (SRF) accelerator cavities. With the aim of advancing the ongoing R&D efforts in improving the material quality of Nb3Sn SRF cavities, we studied how the inclusion of Zr in Nb3Sn matrix via co-sputtering process effects the microscopic structure and superconducting properties. Our results suggest co-sputtered Nb3SnZr alloy as a new prospective material platform to further advance the performance limits of SRF cavities.

Tripathi, Malvika [Fermilab]↗

Program ALLELE

Computer program to formulate matrix of relative deviations from random pairing of amino acids

COMPUTER PROGRAM↗