Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Perovskite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Investigation of defects in melt and solution grown perovskite CsPbBr 3 single crystals

Recently, there has been considerable interest in x-ray and gamma ray detectors with large volume and high energy resolution that operate at room temperature. To improve detector energy resolution, the carrier mobility-lifetime product needs to be increased, and the electronic trap state concentration needs to be minimized. Defect concentrations in the part per billion range can alter the charge transport and carrier recombination lifetime. In this work, thermally stimulated current spectroscopy measurements were systematically carried out in bulk halide perovskite single crystals of CsPbBr 3 over a temperature range of 80–320 K. The origins and trap parameters of CsPbBr 3 crystals from the solution growth and melt growth procedures were determined and compared. Trap concentrations were ranged from 1 × 10 11 to 1 × 10 16 cm –3 . Appreciable detector performance was observed for CsPbBr3 crystals with trap concentrations less than 1 × 10 14 cm –3 . The comparison of spectral responses of crystal samples grown using two different methods shows that, after purification, solution-grown crystals are comparable to melt-grown crystals in terms of low defect concentration and improved detector performance. Finally, for an improved mobility-lifetime product and enhanced spectral response to high energy radiation from fissile materials, trap states in either type of a crystal ingot must be reduced closer to 10 11 cm –3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Leaving in the lead: Priorities for perovskite photovoltaics

The need for moving electricity generation to a sustainable model requires the development of low cost ubiquitous photovoltaics (PVs) to harvest the planet’s primary energy source, the Sun. Building upon the successes of Si-based and CdTe-based PV technologies, PVs with lower-embodied energy and requiring lower carbon dioxide equivalent to produce will be required to meet long-term sustainability goals. In particular, thin-film technologies, such as high-efficiency metal halide perovskite (MHP) PV modules, provide avenues to reduced embodied energy, lower energy payback times, and enabling energy-dense tandems [H. M. Wikoff et al., Joule 6(7), 1710–1725 (2022) and V. Fthenakis, Renewable Sustainable Energy Rev. 13(9), 2746–2750 (2009)]. The ability to improve efficiency and lower energy payback time of next generation thin-film PV modules is a critical foundation for green H2 and electrification more broadly. In this regard, Pb-based MHP-PVs have separated themselves as a result of the high-efficiencies that can be realized across a range of electronic gaps. Questions regarding Pb-based MHP-PVs that are often asked, as the challenges of efficiency and reliability are met, revolve around the “problem” of the Pb content. Specifically, “does Pb toxicity preclude MHP-PV modules from being deployed at the TW scale?” To provide this sense of scale, in 2021, the United States burned 10.5 quads of coal, with 90% of that used for electricity generation. Given the energy content of coal of 29 MJ/kg and a residual lead content in that coal of 30 mg/kg, electricity generation from coal resulted in more lead emitted into the atmosphere than what would be required to produce over 2 TW of MHP-PV name plate capacity (assuming a 20% module efficiency and an ∼700 nm active layer). This amounts to more PV power than has been deployed across all PV technologies and geographies to date. This only includes US coal consumption; the rest of the world would be much larger. This example illustrates the scale of the material usage relative to the energy production. Imagine a power-generation technology that offsets these Pb emissions from coal and essentially sequesters this Pb content between two sheets of impermeable glass. Why should we let Pb’s history of misuse prevent it from being included in next generation PV modules that can enable a sustainable energy future?

14 SOLAR ENERGY↗
DOE OSTI2023

Study of perovskite CsPbBr 3 detector polarization and its mitigation with ultrahigh x-ray flux

High-flux capable semiconductor x-ray detectors are essential in various applications, but the detrimental effects of detector polarization limit their use in many cases. Here, for this work, we studied the polarization of perovskite CsPbBr 3 semiconductor detectors using ultrahigh flux synchrotron x rays (10 6 –10 12 photons s –1 mm –2 at 58.61 keV). The CsPbBr 3 detectors did not show immediate polarization prominently until a flux higher than 10 10 photons s –1 mm –2 . Using the pump-and-probe technique, we visualized the spatial and temporal effects of polarization. The polarized region, represented by reduced photocurrent, extended beyond the area under direct irradiation, and the reduced photocurrent persisted after potential de-polarization treatments. We found that stronger applied electric fields and fewer carrier traps can mitigate polarization, represented by less photocurrent deficit. By examining the detectors’ current response under controlled ambient light, low, and high-flux x rays, we studied the trap filling and release behavior of CsPbBr 3 . We discovered that the polarization is caused by partial detector damage due to deep defects generated by ultrahigh flux x-ray irradiation. Our work provides insight into CsPbBr 3 polarization under extremely intense x-ray radiation and shows that reducing crystal defects and increasing detector bias voltage are effective solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control

Significance The ability to scrutinize the correlation of dimension, composition, and dopant to electrocatalytic performance renders the development of highly active electrocatalysts. This work reports a general and robust strategy for crafting uniform perovskite oxide nanoparticles (i.e., BaTiO 3 and La- and Co-doped BaTiO 3 ) with controlled sizes and dopant compositions by employing amphiphilic star-like diblock copolymers as nanoreactors. Their size- and dopant-dependent oxygen reduction reaction (ORR) performances are unveiled. Particularly, La- and Co-doped BaTiO 3 nanoparticles exhibit markedly improved ORR activities over the pristine counterparts due to reduced free energy barrier of ORR and increased conductivity as substantiated by density functional theory. The nanoreactor strategy could be conveniently extended to yield various functional nanomaterials of interest with tailored sizes and compositions for electrocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Decoding ultrafast polarization responses in lead halide perovskites by the two-dimensional optical Kerr effect

Significance Optoelectronic devices, such as photovoltaics or light-emitting diodes, are based on the interaction of light with charges in the active material. Lead halide perovskites (LHPs) have emerged as excellent materials for optoelectronics, but mysteries remain as to how these materials interact with light. Here, we develop a spectroscopic method to observe the nearly instantaneous responses of LHPs to propagating light fields. This method has allowed us to precisely trace a nonlinear material response resulting from the mixing of different light components overtaking each other during propagation. The resulting oscillatory signals could be easily confused with collective motions of ions or molecules, but are quantitatively accounted by strong nonlinear mixing and polarization-dressed light propagation in single-crystal LHPs.

14 SOLAR ENERGY↗
DOE OSTI2022

Organic molecular dynamics and charge-carrier lifetime in lead iodide perovskite MAPbI 3

Significance Hybrid organic–inorganic perovskites (HOIPs) are among the most promising materials for next-generation solar cells that combine high efficiency and low cost. The record efficiency of HOIP-based solar cells has reached above 25%, and they can be manufactured using simple solution-processing methods that can be drastically cheaper than the current commercial solar cell technologies. Despite the progress so far, the microscopic mechanism for the high solar cell efficiency in HOIPs is yet to be understood. In this study, we show that the ability of organic molecules to rotate on an appropriate time scale in HOIPs can extend the lifetime of photoexcited charge carriers and lead to higher efficiency. This insight can guide the progress toward improved solar cell performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deep learning the properties of inorganic perovskites

We report the ability to accurately and quickly predict the stability of materials and their structural and electronic properties remains a grand challenge in materials science. Density functional theory is widely used as a means of predicting these material properties, but is known to be computationally expensive and scales as the cube of the number of electrons in the material’s unit cell. In this article, for a previously published dataset of inorganic perovskites, we show that a single neural network model using only the elemental properties of the compounds’ constituents can predict lattice constants to within 0.1 Å, heat of formation to within 0.2 eV, and band gaps to within 0.7 eV RMSE. We also compare the performance of the trained network to two widely used regression techniques, namely random forest and Kernel ridge regression, and find that the neural network’s predictions are more accurate for each of the properties. The simultaneous accurate prediction of multiple key properties of technologically relevant materials is promising for rational design and optimization in known and novel chemical spaces.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ultrafast photo-induced phonon hardening due to Pauli blocking in MAPbI 3 single-crystal and polycrystalline perovskites

Metal-halide perovskite semiconductors have attracted intense interest over the past decade, particularly for applications in photovoltaics. Low-energy optical phonons combined with significant crystal anharmonicity play an important role in charge-carrier cooling and scattering in these materials, strongly affecting their optoelectronic properties. We have observed optical phonons associated with Pb–I stretching in both MAPbI 3 single crystals and polycrystalline thin films as a function of temperature by measuring their terahertz conductivity spectra with and without photoexcitation. An anomalous bond hardening was observed under above-bandgap illumination for both single-crystal and polycrystalline MAPbI 3 . First-principles calculations reproduced this photo-induced bond hardening and identified a related lattice contraction (photostriction), with the mechanism revealed as Pauli blocking. For single-crystal MAPbI 3 , phonon lifetimes were significantly longer and phonon frequencies shifted less with temperature, compared with polycrystalline MAPbI 3 . We attribute these differences to increased crystalline disorder, associated with grain boundaries and strain in the polycrystalline MAPbI 3 . Thus we provide fundamental insight into the photoexcitation and electron–phonon coupling in MAPbI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Roadmap on commercialization of metal halide perovskite photovoltaics

Perovskite solar cells (PSCs) represent one of the most promising emerging photovoltaic technologies due to their high power conversion efficiency. However, despite the huge progress made not only in terms of the efficiency achieved, but also fundamental understanding of the relevant physics of the devices and issues which affect their efficiency and stability, there are still unresolved problems and obstacles on the path toward commercialization of this promising technology. In this roadmap, we aim to provide a concise and up to date summary of outstanding issues and challenges, and the progress made toward addressing these issues. While the format of this article is not meant to be a comprehensive review of the topic, it provides a collection of the viewpoints of the experts in the field, which covers a broad range of topics related to PSC commercialization, including those relevant for manufacturing (scaling up, different types of devices), operation and stability (various factors), and environmental issues (in particular the use of lead). We hope that the article will provide a useful resource for researchers in the field and that it will facilitate discussions and move forward toward addressing the outstanding challenges in this fast-developing field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mapping causal pathways with structural modes fingerprint for perovskite oxides

Abstract Causality is innate to the determination of the fundamental mechanism controlling any physical phenomena. However, combining causality within the standard practices of computational modelling to understand structure-functionality connections is extremely rare. This work proposes a fingerprint based on key structural modes for ABO 3 -type perovskite oxides and its derivatives, combined with causal models, for predicting Kohn–Sham energies. Our study of causal models captures the inherent coupling between structural modes such as rotation, tilt and antiferroelectric displacements, responsible for phase transition, polarization, magnetization and metal–insulator transition, exhibited by these materials. Although developed for modelling specific functionality, this method is universally applicable to derive other functionalities and even different material classes while tracking hidden causal mechanisms via structural distortions.

42 ENGINEERING↗
DOE OSTI2025

Spatial Mapping of Chiral-Induced Spin Selectivity in Chiral Perovskite via Spin-Schottky Junction

Chiral halide perovskite (c-HP) semiconductors exhibit on average a large chiral-induced spin selectivity (CISS) effect. Nevertheless, the microscopic details of CISS and its integration in opto-spintronic constructs remain nascent. Reliable reporting of CISS performance characteristics represents a significant challenge in providing the necessary design rules. We show a Kelvin probe force microscopy (KPFM) method that can quantitatively evaluate and spatially map the chirality-dependent surface contact potential difference resulting from the formation of a spin-Schottky junction. We revealed inhomogeneity in the CISS response, where low-CISS regions in the c-HP films reduce the overall macroscopic average, likely serving as a key factor in optimizing macroscopic performance. We also observed that although c-HP films made from higher precursor concentrations lead to thicker films and higher carrier concentrations with subsequent larger barrier heights in the Schottky junction, stronger spin relaxation due to non-ideal film quality reduces spin polarization.

14 SOLAR ENERGY↗
DOE OSTI2023

Bioinspired stability enhancement in deuterium-substituted organic–inorganic hybrid perovskite solar cells

Abstract In hybrid perovskite solar cells (PSCs), the reaction of hydrogens (H) located in the amino group of the organic A-site cations with their neighboring halides plays a central role in degradation. Inspired by the retarded biological activities of cells in heavy water, we replaced the light H atom with its abundant, twice-as-heavy, nonradioactive isotope, deuterium (D) to hamper the motion of H. This D substitution retarded the formation kinetics of the detrimental H halides in Pb-based PSCs, as well as the H bond-mediated oxidation of Sn2+ in Sn–Pb-based narrow-bandgap PSCs, evidenced by accelerated stability studies. A computational study indicated that the zero point energy of D-based formamidinium (FA) is lower than that of pristine FA. In addition, the smaller increase in entropy in D-based FA than in pristine FA accounts for the increased formation free energy of the Sn2+ vacancies, which leads to the retarded oxidation kinetics of Sn2+. In this study, we show that substituting active H with D in organic cations is an effective way to enhance the stability of PSCs without sacrificing photovoltaic (PV) performance. This approach is also adaptable to other stabilizing methods.

14 SOLAR ENERGY↗
DOE OSTI2021

Ab initio anharmonic thermodynamic properties of cubic Ca Si O 3 perovskite

We present an ab initio study of the thermodynamic properties of cubic CaSiO 3 perovskite (CaPv) over the pressure and temperature range of the Earth's lower mantle. We compute the anharmonic phonon dispersions throughout the Brillouin zone by utilizing the phonon quasiparticle approach, which characterizes the intrinsic temperature dependence of phonon frequencies and, in principle, captures full anharmonicity. Such temperature-dependent phonon dispersions are used to calculate ab initio free energy in the thermodynamic limit (N → ∞) within the framework of the phonon gas model. Accurate free energy calculations enable us to investigate cubic CaPv's thermodynamic properties, e.g., thermal expansivity, Grüneisen parameter, bulk modulus, heat capacity and thermal equation of state, where anharmonic effects are demonstrated. Furthermore, the present methodology provides an important theoretical approach for exploring phase boundaries, thermodynamic, and thermoelastic properties of strongly anharmonic materials at high pressures and temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Thermal conductivity of CaSiO 3 perovskite at lower mantle conditions

Thermal conductivity (κ) of mantle minerals is key to understanding dynamics in the deep Earth. It controls the style of mantle convection and the timescale of cooling both the mantle and the core. Cubic CaSiO 3 perovskite (CaPv) is the third most abundant mineral in the lower mantle (7 vol %). Despite its importance, no theoretical or experimental estimate of CaPv's κ is available. Theoretical investigations of its properties are challenging because of its strong anharmonicity. Experimental measurements at relevant pressures and temperatures are equally challenging. Here we present ab initio results for CaPv's κ obtained using the phonon quasiparticle approach to address its strong anharmonicity. We also offer experimental measurements of κ up to 67 GPa and 1950 K. Predictions and measurements are in good agreement and reveal a surprisingly large κ for cubic CaPv that can be explained on the basis of its high crystal structure symmetry. Despite its relatively low abundance, CaPv's κ increases the lower mantle κ by ~10 %, if accounted for. κ of mantle regions enriched in subducted crustal materials will be more strongly impacted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Chemically and electrically tunable spin polarization in ferroelectric Cd-based hybrid organic-inorganic perovskites

Density functional theory computations are used to predict the electronic structure of Cd-based hybrid organic-inorganic high-T C ferroelectric perovskites with TMCM-CdCl 3 being one representative. Here we report Rashba-Dresselhaus spin splitting in the valence band of these nonmagnetic compounds. Interestingly, we find in computations that the splitting is not necessarily sensitive to the polarization of the material but to the organic molecule itself which opens a way to its chemical tunability through the choice of the molecule. Further chemical tunability of spin splitting is shown to be possible through a substitution of Cl in the CdCl 3 chains as the valence band was found to originate from Cl-Cl weekly bonding orbitals. For example, the substitution of Cl with Br in TMCM-CdCl 3 resulted in a ten times increase of spin splitting. Furthermore, the spin polarization in these materials gives origin to persistent spin textures which are coupled to the polarization direction, and, therefore, can be controlled by the electric field. This is promising for spintronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomic structural mechanism for ferroelectric-antiferroelectric transformation in perovskite NaNbO 3

Sodium niobate (NaNbO 3 or NN) is described as “the most complex perovskite system,” which exhibits transitions between, as well as coexistence of, several ferroelectrics (FE) and antiferroelectric (AFE) phases at different temperatures. Recently, solid solutions of NN with stabilized AFE phases(s) have gained attention for energy-related applications, such as high-density energy storage and electrocaloric cooling. A better understanding of the atomic mechanisms responsible for AFE/FE phase transitions in NaNbO 3 can enable a more rational design of its solid-solution systems with tunable functional properties. In this work, we have investigated changes in the average and local atomic structure of NN using a combination of x-ray/neutron diffraction and neutron pair-distribution function (PDF) analyses. The Rietveld refinement of the x-ray/neutron-diffraction patterns indicates a coexistence of the FE Q (P2 1 ma) and AFE P (Pbma) phases in the temperature range of 300 K ≤ T ≤ 615K, while PDF analysis indicated that the local structure (r < 8Å) is better described by a P2 1 ma symmetry. Above 615 K, the average structure transitions to an AFE R phase (Pmmn or Pnma), while PDF analysis shows an increased disordering of the octahedral distortions and Na displacements at the local scale. These results indicate that the average P/Q/R phase transitions in NN can be described as a result of complex ordering of distorted octahedral tilts at the nanoscale and off-centered displacements of the Na atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Predicting band gaps and band-edge positions of oxide perovskites using density functional theory and machine learning

Density functional theory (DFT) within the local or semilocal density approximations, i.e., the local density approximation (LDA) or generalized gradient approximation (GGA), has become a workhorse in the electronic structure theory of solids, being extremely fast and reliable for energetics and structural properties, yet remaining highly inaccurate for predicting band gaps of semiconductors and insulators. The accurate prediction of band gaps using first-principles methods is time consuming, requiring hybrid functionals, quasiparticle GW, or quantum Monte Carlo methods. Efficiently correcting DFT-LDA/GGA band gaps and unveiling the main chemical and structural factors involved in this correction is desirable for discovering novel materials in high-throughput calculations. In this direction, we, in this study, use DFT and machine learning techniques to correct band gaps and band-edge positions of a representative subset of ABO 3 perovskite oxides. Relying on the results of HSE06 hybrid functional calculations as target values of band gaps, we find a systematic band-gap correction of ~1.5 eV for this class of materials, where ~1 eV comes from downward shifting the valence band and ~0.5 eV from uplifting the conduction band. The main chemical and structural factors determining the band-gap correction are determined through a feature selection procedure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Characterizing random-singlet state in two-dimensional frustrated quantum magnets and implications for the double perovskite Sr 2 CuTe 1 – x W x O 6

Motivated by the experimental observation of a nonmagnetic phase in compounds with frustration and disorder, we study the ground state of a spin-1/2 square-lattice Heisenberg model with randomly distributed nearest-neighbor J 1 and next-nearest-neighbor J 2 couplings. By using the density matrix renormalization group (DMRG) calculation on a cylinder system with a circumference of up to ten lattice sites, we identify a disordered phase between the Néel and stripe magnetic phase with growing J 2 /J 1 in the presence of strong bond randomness. The vanished spin-freezing parameter indicates the absence of spin-glass order. The large-scale DMRG results unveil the size-scaling behaviors of the spin-freezing parameter, the power-law decay of the average spin correlation, and the exponential decay of the typical spin correlation, which all agree with the corresponding behavior in the one-dimensional random-singlet (RS) state and characterize the RS nature of this disordered phase. The DMRG simulation also provides insights and opportunities for characterizing a class of nonmagnetic states in two-dimensional frustrated magnets with disorder. Here, we also compare with existing experiments and suggest more measurements for understanding the spin-liquid-like behaviors in the double perovskite Sr 2 CuTe 1–x W x O 6 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗