Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance Evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Enhanced Component Performance Study: Motor-Driven Pumps 1998–2014

This report presents an enhanced performance evaluation of motor-driven pumps at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from fiscal year 1998 through 2014 for the component reliability as reported in the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The motor-driven pump failure modes considered for standby systems are failure to start, failure to run less than or equal to one hour, and failure to run more than one hour; for normally running systems, the failure modes considered are failure to start and failure to run. An eight hour unreliability estimate is also calculated and trended. The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire active period. Statistically significant increasing trends were identified in pump run hours per reactor year. Statistically significant decreasing trends were identified for standby systems industry-wide frequency of start demands, and run hours per reactor year for runs of less than or equal to one hour.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Experience of Migrating a Parallel Graph Coloring Program from CUDA to SYCL

We describe the experience of converting a CUDA implementation of a parallel graph coloring algorithm to SYCL. The goals are for our work to be useful to application and compiler developers by providing a detailed description of migration paths between CUDA and SYCL. We will describe how CUDA functions are mapped to SYCL functions. Evaluating the CUDA and SYCL implementations of the algorithm shows that the performance of SYCL and CUDA kernels are comparable over the test graph set on NVIDIA P100 and V100 GPUs. The SYCL program also allows for performance evaluation with the OpenCL and Level Zero interfaces and power profiling on an Intel GPU computing platform.

97 MATHEMATICS AND COMPUTING↗

Circuit performance of a parasitic-loading digital speed controller for a 400-hertz turbine-driven alternator

Parasitic speed controllers are used in space power electrical generating systems to maintain the speed of the turbine-driven alternators within specified limits. Selected subcircuits for a solid state parasitic-loading speed controller were assembled and tested. The test results as obtained to date consist of the performance evaluation of the frequency reference and the period counter subcircuits. These circuits performed as expected.

Ryan, J. P.↗

One way Doppler extractor. Volume 1: Vernier technique

A feasibility analysis, trade-offs, and implementation for a One Way Doppler Extraction system are discussed. A Doppler error analysis shows that quantization error is a primary source of Doppler measurement error. Several competing extraction techniques are compared and a Vernier technique is developed which obtains high Doppler resolution with low speed logic. Parameter trade-offs and sensitivities for the Vernier technique are analyzed, leading to a hardware design configuration. A detailed design, operation, and performance evaluation of the resulting breadboard model is presented which verifies the theoretical performance predictions. Performance tests have verified that the breadboard is capable of extracting Doppler, on an S-band signal, to an accuracy of less than 0.02 Hertz for a one second averaging period. This corresponds to a range rate error of no more than 3 millimeters per second.

Blasco, R. W.↗

Electronics systems test laboratory testing of shuttle communications systems

Shuttle communications and tracking systems space to space and space to ground compatibility and performance evaluations are conducted in the NASA Johnson Space Center Electronics Systems Test Laboratory (ESTL). This evaluation is accomplished through systems verification/certification tests using orbiter communications hardware in conjunction with other shuttle communications and tracking external elements to evaluate end to end system compatibility and to verify/certify that overall system performance meets program requirements before manned flight usage. In this role, the ESTL serves as a multielement major ground test facility. The ESTL capability and program concept are discussed. The system test philosophy for the complex communications channels is described in terms of the major phases. Results of space to space and space to ground systems tests are presented. Several examples of the ESTL's unique capabilities to locate and help resolve potential problems are discussed in detail.

Stoker, C. J.↗

Cognitive models of pilot categorization and prioritization of flight-deck information

In the past decade, automated systems on modern commercial flight decks have increased dramatically. Pilots now regularly interact and share tasks with these systems. This interaction has led human factors research to direct more attention to the pilot's cognitive processing and mental model of the information flow occurring on the flight deck. The experiment reported herein investigated how pilots mentally represent and process information typically available during flight. Fifty-two commercial pilots participated in tasks that required them to provide similarity ratings for pairs of flight-deck information and to prioritize this information under two contextual conditions. Pilots processed the information along three cognitive dimensions. These dimensions included the flight function and the flight action that the information supported and how frequently pilots refer to the information. Pilots classified the information as aviation, navigation, communications, or systems administration information. Prioritization results indicated a high degree of consensus among pilots, while scaling results revealed two dimensions along which information is prioritized. Pilot cognitive workload for flight-deck tasks and the potential for using these findings to operationalize cognitive metrics are evaluated. Such measures may be useful additions for flight-deck human performance evaluation.

Jonsson, Jon E.↗

Series Bosch Carbon Formation Reactor Trade Study and Down-Select

Human exploration missions to Mars and other destinations beyond low Earth orbit require highly robust, reliable, and maintainable life support systems that maximize the recovery of oxygen (O2). One process in development and under consideration is the Series-Bosch System (S-Bosch). This system is a two stage reactor process that reduces carbon dioxide (CO2) with hydrogen (H2) to produce water and solid carbon. Theoretically, the Bosch process can recover 100% of the O2 from CO2 in the form of water, making it an attractive option for long duration missions. The Series Bosch system includes a reverse water gas shift (RWGS) reactor, a carbon formation reactor (CFR), a H2 extraction membrane, and a CO2extraction membrane. To further the development of oxygen recovery systems, NASA awarded Phase I contracts to several entities under the Game Changing Development Program addressing Spacecraft Oxygen Recovery (SCOR). Two of the hardware deliverables were integrated into the Carbon Dioxide Reduction Test Stand (CORTS) as carbon formation reactors and performance evaluations were executed at Marshall Space Flight Center. A trade study was performed between these two reactors along with one developed at MSFC. This paper provided the necessary information for the Advanced Exploration Systems/Life Support Systems Project (AES/LSS) managers to select a CFR for further development and discusses the process of selection.

Bosch↗

The Office of Groundwater & Soil Remediation Fiscal Year 2011 Research & Development Program

The U.S. Department of Energy's (DOE) Office of Groundwater and Soil Remediation supports technology development and technical assistance for the remediation of environments contaminated by legacy nuclear waste. The core of the program is centered on delivering proactive, responsive expertise and technologies with highly-leveraged, carefully selected investments that maximum impact on life-cycle cleanup costs and risks across the DOE complex. The program currently focuses on four main priorities: improved sampling and characterization strategies, advanced predictive capabilities, enhanced remediation methods, and improved long-term performance evaluation and monitoring. In FY 2010, the program developed a detailed research and development (R and D) plan in support of a larger initiative to integrate R and D efforts across EM. This paper provides an overview of the priority action areas and the program's near-term technical direction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Remediation of a 3-Mile Hexavalent Chromium Plume in Hinkley, California - 18532

Pacific Gas and Electric Company (PG and E) is conducting assessment and cleanup of hexavalent chromium (Cr[VI]) in groundwater related to industrial activities from the 1950's and 1960's at the PG and E Hinkley Compressor Station near Barstow, California (the Site). The plume core undergoing remediation is approximately 4.8 kilometers long and 1.6 kilometers wide (3 miles long and one mile wide). In December 2015, a Cleanup and Abatement Order was issued which established cleanup requirements for the Site, including required cleanup time frames for the plume core undergoing remediation to reach 50 micrograms per liter (μg/L) across 90% of the plume by 2025 and to reach 10 μg/L across 80% of the plume by 2032. To reach the milestones at the scale of the site, remedy design includes a series of remedial system expansions and remedy implementation relies on an adaptive management scheme for continual performance evaluation and optimization. This presentation will detail the remedial approach, implementation and performance to date. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reactivity impact of accident tolerant claddings in an equilibrium PWR core

The US DoE's Accident Tolerant Fuels (ATF) program aims to establish a process to evaluate the feasibility of several ATF concepts. The two main aspects of such a process are to evaluate the 3-D 'whole core' neutronics and fuel (thermal-mechanical) performance. Determining the best ATF candidate usually involves a compromise between these two performance aspects. The work presented in this paper focuses solely on the 3-D neutronics, looking specifically at the end of cycle (EOC) reactivity, and upon the establishment of a realistic and modern equilibrium PWR core to use as a test-bed. Both the lattice physics code CASMO-4 and the 3-D nodal simulator NESTLE were used in this study. Eventually, operational power histories are provided to our collaborating team to carry out fuel performance evaluations to be presented in a future article. Neutronically, a goal of a prospective ATF concept is to at least match the fuel cycle length of a core with standard Zircaloy/UO{sub 2} fuel, without having to significantly change the design of the fuel bundle; meaning, without changing pin pitch or outer clad diameter. Such a 'seamless' transition to another cladding type would greatly reduce the burden of all the nuclear energy stakeholders (regulators, vendors, utilities), from both an analysis and financial perspective. For cladding materials that are less transparent to neutrons, which for this study included all the ATF concepts, the two degrees of freedom with respect to fuel fabrication are the U-235 enrichment and cladding thickness. The latter involved changing only the fuel radius and inner clad radius while keeping the gap and outer clad radius constant. The thinnest cladding value was set to a generous estimate of the minimum iron-chromium-aluminum (FeCrAl) thickness that can be manufactured. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Architecture-Level Dependability Analysis of a Medical Decision Support System

Recent advances in techniques such as image analysis, text analysis and machine learning have shown great potential to assist physicians in detecting and diagnosing health issues in patients. In this paper, we describe the approach and findings of an architecture-level dependability analysis for a mammography decision support system that incorporates these techniques. The goal of the research described in this paper is to provide an initial understanding of the dependability issues, particularly the potential failure modes and severity, in order to identify areas of potential high risk. The results will guide design decisions and provide the basis of a dependability and performance evaluation program.

99 GENERAL AND MISCELLANEOUS↗

The Potosi Reservoir Model 2013

As a part of a larger project co-funded by the United States Department of Energy (US DOE) to evaluate the potential of formations within the Cambro-Ordovician strata above the Mt. Simon as potential targets for carbon sequestration in the Illinois and Michigan Basins, the Illinois Clean Coal Institute (ICCI) requested Schlumberger to evaluate the potential injectivity and carbon dioxide (CO2) plume size of the Cambrian Potosi Formation. The evaluation of this formation was accomplished using wireline data, core data, pressure data, and seismic data from the US DOE-funded Illinois Basin–Decatur Project (IBDP) being conducted by the Midwest Geological Sequestration Consortium in Macon County, Illinois. In 2010, technical performance evaluations on the Cambrian Potosi Formation were performed through reservoir modeling. The data included formation tops from mud logs, well logs from the VW1 and the CCS1 wells, structural and stratigraphic formation from three dimensional (3D) seismic data, and field data from several waste water injection wells for Potosi Formation. Intention was for two million tons per annum (MTPA) of CO2 to be injected for 20 years. In the preceding, the 2010 Potosi heterogeneous model (referred to as the "Potosi Dynamic Model 2010" in this topical report) was re-run using a new injection scenario; 3.2 MTPA for 30 years. The extent of the Potosi Dynamic Model 2010, however, appeared too small for the new injection target. It was not sufficiently large enough to accommodate the evolution of the plume. The new model, Potosi Dynamic Model 2013a, was built by extending the Potosi Dynamic Model 2010 grid to 30 miles x 30 miles (48.3km x48.3km), while preserving all property modeling workflows and layering. This model was retained as the base case of Potosi Dynamic Model 2013a. The Potosi reservoir model was updated to take into account the new data from the verification well VW2 which was drilled in 2012. The new porosity and permeability modeling was performed to take into account the log data from the new well. Revisions of the 2010 modeling assumptions were also done on relative permeability, capillary pressures, formation water salinity, and the maximum allowable well bottomhole pressure. Dynamic simulations were run using the injection target of 3.2 MTPA for 30 years. This new dynamic model was named Potosi Dynamic Model 2013b. Due to the major uncertainties on the vugs permeability, two models were built; the Pessimistic and Optimistic Cases. The Optimistic Case assumes vugs permeability of 9,000 mD, which is analog to the vugs permeability identified in the pressure fall off test of a waste water injector in the Tuscola site, approx. 40 miles (64.4km) away from the IBDP area. The Pessimistic Case assumes that the vugs permeability is equal to the log data, which does not take into account the permeability from secondary porosity. The probability of such case is deemed low and could be treated as the worst case scenario, since the contribution of secondary porosity to the permeability is neglected and the loss circulation events might correspond to a much higher permeability. It is considered important, however, to identify the range of possible reservoir performance since there are no rigorous data available for the vugs permeability. The Optimistic Case gives an average CO2 injection rate of 0.8 MTPA and cumulative injection of 26 MT in 30 years, which corresponds to 27% of the injection target. The injection rate is approx. 3.2 MTPA in the first year as the well is injecting into the surrounding vugs, and declines rapidly to 0.8 MTPA in year 4 once the surrounding vugs are full and the CO2 start to reach the matrix. This implies that according to this preliminary model, a minimum of four (4) wells could be required to achieve the injection target. This result is lower than the injectivity estimated in the Potosi Dynamic Model 2013a (43 MT in 30 years), since the permeability model applied in the Potosi Dynamic Model 2013b is more conservative. This revision was deemed necessary to treat the uncertainty in a more appropriate manner. As the CO2 follows the paths where vugs interconnection exists, a reasonably large and irregular plume extent was created. For the Optimistic Case, the plume extends 17 miles (27.4km) in E-W and 14 miles (22.5km) in N-S directions after 30 years. After injection is completed, the plume continues to migrate laterally, mainly driven by the remaining pressure gradient. After 100 years post injection, the plume extends 20 miles (32.2km) in E-W and 15.5 miles (24.9km) in N-S directions. Should the targeted cumulative injection of 96 MT be achieved; a much larger plume extent could be expected. For the Optimistic Case, the increase of reservoir pressure at the end of injection is approximately 1200 psia (8,274 kPa) around the injector and gradually decreases away from the well. The reservoir pressure increase is less than 30 psia (206.8 kPa) beyond 14 miles (22.5km) away from injector. Should the targeted cumulative injection of 96 MT be achieved; a much larger areal pressure increase could be expected. The initial reservoir pressure is nearly restored after approximately 100 years post injection. The presence of matrix slows down the pressure dissipations. The Pessimistic Case gives an average CO2 injection rate of 0.2 MTPA and cumulative injection of 7 MT in 30 years, which corresponds to 7% of the injection target. This implies that in the worst case scenario, a minimum of sixteen (16) wells could be required to achieve the injection target. The present evaluation is mainly associated with uncertainty on the vugs permeability, distribution, and interconnectivity. The different results indicated by the Optimistic and Pessimistic Cases signify the importance of vugs permeability characterization. Therefore, injection test and pressure interference test among the wells could be considered to evaluate the local vugs permeability, extent, and interconnectivity. Porosity mapping derived from the seismic inversion could also be used in the succeeding task to characterize the lateral porosity distribution within the reservoir. With or without seismic inversion porosity mapping, it is worth exploring whether increased lateral heterogeneity plays a significant role in Potosi injectivity. Investigations on vugular, dolomitic outcrops suggest that there may be significantly greater lateral heterogeneity than what has been modeled here. Facies modeling within the Potosi has yet to be thoroughly addressed. The carbonates during the time of deposition are believed to be regionally extensive. However, it may be worth delineating the reservoir with other regional wells or modern day analogues to understand the extent of the Potosi. More specifically, the model could incorporate lateral changes or trends if deemed necessary to represent facies transition. Data acquisitions to characterize the fracture pressure gradient, the formation water properties, the relative permeability, and the capillary pressure could also be considered in order to allow a more rigorous evaluation of the Potosi storage performance. A simulation using several injectors could also be considered to determine the required number of wells to achieve the injection target while taking into account the pressure interference.

Adushita, Yasmin↗

EVALUATION OF TEMPORAL VARIATIONS IN HYDRAULIC CAPTURE DUE TO CHANGING FLOW PATTERNS USING MAPPING AND MODELING TECHNIQUES

Robust performance evaluation represents one of the most challenging aspects of groundwater pump-and-treat (P&T) remedy implementation. In most cases, the primary goal of the P&T system is hydraulic containment, and ultimately recovery, of contaminants to protect downgradient receptors. Estimating the extent of hydraulic containment is particularly challenging under changing flow patterns due to variable pumping, boundaries and/or other conditions. We present a systematic approach to estimate hydraulic containment using multiple lines of evidence based on (a) water-level mapping and (b) groundwater modeling. Capture Frequency Maps (CFMs) are developed by particle tracking on water-level maps developed for each available water level data set using universal kriging. In a similar manner, Capture Efficiency Maps (CEMs) are developed by particle tracking on water-levels calculated using a transient groundwater flow model: tracking is undertaken independently for each stress period using a very low effective porosity, depicting the 'instantaneous' fate of each particle each stress period. Although conceptually similar, the two methods differ in their underlying assumptions and their limitations: their use together identifies areas where containment may be reliable (i.e., where the methods are in agreement) and where containment is uncertain (typically, where the methods disagree). A field-scale example is presented to illustrate these concepts.

54 ENVIRONMENTAL SCIENCES↗

Experimental Evaluation of High Performance Integrated Heat Pump

Integrated heat pump (IHP) technology provides significant potential for energy savings and comfort improvement for residential buildings. In this study, we evaluate the performance of a high performance IHP that provides space heating, cooling, and water heating services. Experiments were conducted according to the ASHRAE Standard 206-2013 where 24 test conditions were identified in order to evaluate the IHP performance indices based on the airside performance. Empirical curve fits of the unit s compressor maps are used in conjunction with saturated condensing and evaporating refrigerant conditions to deduce the refrigerant mass flowrate, which, in turn was used to evaluate the refrigerant side performance as a check on the airside performance. Heat pump (compressor, fans, and controls) and water pump power were measured separately per requirements of Standard 206. The system was charged per the system manufacturer s specifications. System test results are presented for each operating mode. The overall IHP performance metrics are determined from the test results per the Standard 206 calculation procedures.

Miller, William A↗

Optimization and simulation of flight control laws under parameter uncertainty and external disturbances

Several tasks pertinent to flight control in parameter uncertainty and wind-gust loading were successfully completed. Identification algorithms for extracting stability and control derivatives from flight data taking gust loading into account were developed. They were verified by simulation and evaluated throughly on actual flight data taken on a Lockheed Jet Star flying in turbulence. In particular the need for automatically generated dither-like inputs was studied. Criteria for performance evaluation using stochastic models were developed for gust alleviation as well as handling quantities. Algorithms for assessing degradation in performance due to parameter uncertainty were developed and evaluated using flight test data.

Source record↗

Tuyere: Enabling Scalable Memory Workloads for System Exploration

Memory technologies are under active development. Meanwhile, workloads on contemporary computing systems are increasing rapidly in size and diversity. Such dynamics in hardware and software further widen the gap between memory system design and performance evaluation. In this work, we propose a data-centric abstraction of high-performance computing applications for fast exploration of new memory technologies. We also provide a framework that uses a formal modeling language to describe the abstraction, automatically translates abstractions into memory traffic, and directly interfaces with cycle-accurate simulators. We evaluated the framework using 20 workloads and validated the memory traffic profile, the simulation results, and the relative memory changes of four memory technologies. Our results show that the data-centric abstraction can accurately capture application behavior adaptable to different input problems and can expedite system exploration.

Peng, Ivy Bo↗

Mechanistic Models as Framework for Understanding Biomarker Disposition: Prediction of Creatinine‐Drug Interactions

Creatinine is widely used as a biomarker of glomerular filtration, and, hence, renal function. However, transporter‐mediated secretion also contributes to its renal clearance, albeit to a lesser degree. Inhibition of these transporters causes transient serum creatinine elevation, which can be mistaken as impaired renal function. The current study developed mechanistic models of creatinine kinetics within physiologically based framework accounting for multiple transporters involved in creatinine renal elimination, assuming either unidirectional or bidirectional‐OCT2 transport (driven by electrochemical gradient). Robustness of creatinine models was assessed by predicting creatinine‐drug interactions with 10 perpetrators; performance evaluation accounted for 5% intra‐individual variability in serum creatinine. Models showed comparable predictive performances of the maximum steady‐state effect regardless of OCT2 directionality assumptions. However, only the bidirectional‐OCT2 model successfully predicted the minimal effect of ranitidine. The dynamic nature of models provides clear advantage to static approaches and most advanced framework for evaluating interplay between multiple processes in creatinine renal disposition.

Scotcher, Daniel↗

Evaluation of a scientific data search infrastructure

The ability to search over large scientific datasets has become crucial to next-generation scientific discoveries as data generated from scientific facilities grow dramatically. In previous work, we developed and deployed ScienceSearch, a search infrastructure for scientific data which uses machine learning to automate metadata creation. Our current deployment is deployed atop a container based platform at a HPC center. In this article, we present an evaluation and discuss our experiences with the ScienceSearch infrastructure. Specifically, we present a performance evaluation of ScienceSearch's infrastructure focusing on scalability trends. The obtained results show that ScienceSearch is able to serve up to 130 queries/min with latency under 3 s. We discuss our infrastructure setup and evaluation results to provide our experiences and a perspective on opportunities and challenges of our search infrastructure.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗