Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Validating the rhenium proxy for rock organic carbon oxidation using weathering profiles

Chemical weathering over geological timescales acts as a source or sink of atmospheric carbon dioxide (CO 2 ), while influencing long-term redox cycling and atmospheric oxygen (O 2 ) at Earth's surface. There is a growing recognition that the oxidative weathering of rock organic carbon (OC petro ) can release more CO 2 than is locally drawn down by silicate weathering, and may vary due to changes in erosion and climate. The element rhenium (Re) has emerged as a proxy to track the oxidative weathering of OC petro , yet uncertainties in its application remain namely that we lack a systematic assessment of the comparative mobility of Re and OC petro during sedimentary rock weathering. Here we measure Re and OC petro loss across gradients in rock weathering at 9 global sites, spanning a range of initial OC petro values from ~0.2 % to >10 %. We use titanium to account for volume changes during weathering and assess Re and OC petro loss alongside major elements that reflect silicate (Na, Mg), carbonate (Ca, Mg) and sulfide (S) weathering. Across the dataset, Re loss is correlated with OC petro loss but not with loss of any other major element. Further, across the weathering profiles, the average molar ratio of OC petro to Re loss was 0.84 ± 0.15, with 8 out of 9 sites having a ratio >0.74. At one site (Marcellus Shale), the average ratio was lower at 0.58 ± 0.11. The excess loss of Re matches expectations that, typically, between ~0 and 20 % of the Re liberated by sedimentary rock weathering derives from silicate or sulfide phases, while some OC petro may be physically or chemically protected from weathering. Overall, our measurements provide validation for the Re proxy of OC petro oxidation and allow future work to further improve our knowledge of regional and global-scale rates of this important source of CO 2 in the geochemical carbon cycle.

58 GEOSCIENCES↗
DOE OSTI2023

Investigation of process history and underlying phenomena associated with the synthesis of plutonium oxides using Vector Quantizing Variational Autoencoder

Accurate, high throughput, and unbiased analysis of plutonium oxide particles is needed for analysis of the phenomenology associated with process parameters in their synthesis. Compared to qualitative and taxonomic descriptors, quantitative descriptors of particle morphology through scanning electron microscopy (SEM) have shown success in analyzing process parameters of uranium oxides. Among other candidates, a neural network called a Vector Quantizing Variational Autoencoder (VQ-VAE) has shown the ability to quantitatively describe particle morphology to attain >85% accuracy in identifying uranium oxide processing routes. We utilize a VQ-VAE to quantitatively describe plutonium dioxide (PuO 2 ) particles created in a designed experiment and investigate their phenomenology and prediction of their process parameters. PuO 2 was calcined from Pu(III) oxalates that were precipitated under varying synthetic conditions that related to concentrations, temperature, addition and digestion times, precipitant feed, and strike order; the surface morphology of the resulting PuO 2 powders were analyzed by SEM. A pipeline was developed to extract and quantify useful image representations for individual particles with the VQ-VAE, then further reduce the dimensionality of the feature space using a bottlenecking neural network fit to perform multiple classification tasks simultaneously. The reduced feature space could predict process parameters with greater than 80% accuracies for some parameters with a single particle. They also showed utility for grouping particles with similar surface morphology characteristics together. Both the clustering and classification results reveal valuable information regarding which chemical process parameters chiefly influence the PuO 2 particle morphologies: strike order and oxalic acid feedstock. Doing the same analysis with multiple particles was shown to improve the classification accuracy on each process parameter over the use of a single particle, with statistically significant results generally seen with as few as four particles in a sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

CO 2 -mediated oxidative dehydrogenation of propane enabled by Pt-based bimetallic catalysts

The greenhouse gas CO 2 is a promising soft oxidant for the oxidative dehydrogenation of light alkanes. However, the occurrence of side reactions including cracking, hydrogenolysis, and reforming results in lower olefin yields compared with direct dehydrogenation. Here, we report that Pt-M (M = Sn/In/Zn) bimetallic catalysts on non-redox-active silica support can break the equilibrium limit of direct propane dehydrogenation using CO 2 as a co-reactant to consume the hydrogen formed in propane dehydrogenation. Unlike the commonly postulated direct CO 2 -assisted dehydrogenation mechanism, we confirm that CO 2 -oxidative dehydrogenation of propane (ODHP) proceeds in two tandem steps on these bimetallic catalysts, i.e., propane dehydrogenation and reverse water-gas shift, with the latter being the rate-determining step. In situ X-ray absorption studies and density functional theory calculations suggest that the Pt m M n -MO x (e.g., Pt 3 Sn-SnO x ) interfaces are likely active sites.

03 NATURAL GAS↗
DOE OSTI2023

Non-equilibrium low-temperature plasma-assisted combustion of iso-octane: Perturbing pyrolysis and oxidation kinetics

Here, in this study, a plasma-coupled flow reactor facility is used to examine the effects of non-equilibrium low-temperature plasmas on perturbing the pyrolysis and oxidation kinetics of iso-octane. Experiments were performed in highly dilute reactive mixtures of nitrogen, at near isothermal conditions for temperatures ranging from 523 K to 1203 K. Experiments cumulatively demonstrated enhanced chemical reactivity with the plasma for temperatures below 900 K, and a lowering of the hot-ignition temperature. Detailed kinetic insight was derived from a 0D plasma-coupled kinetic model, utilizing a constructed mechanism that combined both plasma-specific chemistry and the neutral combustion chemistry. For pyrolysis conditions, the model displayed relatively good agreement with fuel consumption and the formation of most intermediates compared to the experimental data, demonstrating the model is able to accurately predict primary radical formation from the plasma directly interacting with the fuel. Enhanced reactivity was attributed to collisional quenching of excited-states of N 2 with fuel, which led to efficient fuel fragmentation and enhancement of the H-radical flux. For oxidation conditions, the model displayed satisfactory agreement with the experiments. Model predictions were able to accurately predict fuel consumption and most intermediate speciation data for T > 800 K, but most discrepancies were towards T < 800 K in particular with oxygenated intermediates. In the presence of oxygen, plasma effects were predominantly spent on efficient enhancement of O- and H-radical fluxes, leading to further fuel fragmentation and initiation of both the OH- and HO 2 -radical pools. Subsequent reactivity of iso-octane was then dictated by the response of the temperature-dependent neutral chemistry. At low-temperatures (T = 643 K), enhanced fuel radicals and O 2 -additon chemistry lead to the formation of oxygenated species, while at intermediate temperatures (T = 843 K) net decrease in OH-radical reactivity led to an increase in hydrocarbon speciation. Near the self-ignition threshold (T = 1163 K), radicals generated by high-temperature branching reactions dominate the oxidation process and effectively ignition. This study ultimately demonstrated that the enhancement of radicals afforded by the plasma causes a deviation in known understanding of iso-octane kinetics in some regards and warrants future studies to reconcile these discrepancies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Sublimation and oxidation measurements of graphite and carbon black at high temperatures in a shock tube using absorption imaging and thermal emission

Surface mass loss rates due to sublimation and oxidation at temperatures of 3000–7000 K have been measured in a shock tube for graphite and carbon black (CB) particles. Diagnostics are presented for measuring surface mass loss rates by diffuse backlit illumination extinction imaging and thermal emission. Here, the surface mass loss rate is found by regression fitting extinction and emission signals with an independent spherical primary particle assumption. Measured graphite sublimation and oxidation rates are reported to be an order of magnitude greater than CB sublimation and oxidation rates. It is speculated that the difference between CB and graphite surface mass loss rates is largely due to the primary particle assumption of the presented technique which misrepresents the effective surface area of an aggregate particle where primary particles overlap and shield inner particles. Measured sublimation rates are compared to sublimation models in the literature, and it is seen graphite shows fair agreement with the models while CB underestimates, likely a result of the particle shielding affect not being considered in the sublimation model.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High temperature air oxidation behavior of Hastelloy X processed by Electron Beam Melting (EBM) and Selective Laser Melting (SLM)

The microstructure and oxidation behavior of Laser Beam Melted, Electron Beam Melted and wrought Hastelloy X were studied at 950 °C in dry air, 50 h cycles, up to 1000 h. The variability of processing parameters and powder compositions strongly impacted the oxidation and spallation behavior. Finally, the alloys with high Mn and Si were associated with higher oxidation rates, finer Cr 2 O 3 grain microstructure and increased spallation was observed for the alloys with large elongated grain microstructures (aspect ratio of 10 ± 3).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Parabolic oxidation kinetics of a plutonium alloy at room temperature

Auger electron spectroscopy (AES) was used to characterize the oxide scale formed on an ~0.5 wt. % Ga plutonium metal alloy. Analysis of changes to the characteristic Auger transitions for Pu and O during sputter depth profiles were used in combination with previously measured sputter yields to determine the thickness of the oxide scale and provide insight into its chemistry. From this data, the parabolic kinetics for the Pu-Ga alloy were determined as a function of relative humidity, RH = 14–92%, and oxygen partial pressure, p(O 2 ) = 31–157 Torr, at 25°C. For each relative humidity investigated, the parabolic rate constant was found to be independent of oxygen partial pressure. Furthermore, power-law fits to the relative humidity effect on the rate constant was found to have a power of n = 1.265, indicating the diffusion species which rate-limits the reaction isn’t molecular water, which subsequent dissociates at the oxide-metal interface, or hydroxyl from dissociation at the gas-surface interface.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Analysis of inconel 600 oxidized under loss-of-coolant accident conditions: A multi-modal approach

Understanding the performance of cladding materials during a loss-of-coolant accident scenario is crucial for developing next-generation accident tolerant nuclear fuel rod claddings. We describe a multi-modal approach combining synchrotron-based diffraction, and Raman spectroscopy with nano-scale electron microscopy techniques for investigating oxidation of Inconel 600 (A600) in steam and air environments at 1200 °C for 2 h. We report that A600 exposed to steam develops a Cr 2 O 3 -enriched surface layer while a mixed phase oxide layer containing NiFe 2 O 4 , Cr 2 O 3 , Fe 3 O 4 and Fe (3–x) CrxO 4 is formed in air. Mechanism of oxidation for A600 in air and steam environments is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Temperature-dependence of oxidation and carburization of Grade 91 steel in CO 2 containing impurities

Future CO 2 based power systems require steels resistant to corrosion in high-temperature CO 2 -rich environments. Candidate 9Cr ferritic-martensitic steels degrade by surface oxidation and substrate carburization, both of which can be strongly affected by impurities in the CO 2 . In this study we examined Grade 91 steel exposed to 95%CO 2 -4%H 2 O-1%O 2 with/without 0.1% SO 2 at 1 atm and 550, 600, 650° C for up to 3000 h to establish the temperature-dependence of these processes. SO 2 showed little effect on oxidation at 550-600° C but reduced carburization, while the combination of SO 2 and faster alloy diffusion at 650° C resulted in significant reduction in both oxidation and carburization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of native oxide film on corrosion behavior of additively manufactured stainless steel 316L

The influence of the native oxide film on passive film properties and localized corrosion of additively manufactured SS 316L was studied in 1 wt% HCl by XPS characterization, electrochemical polarization curves, and post-test morphology analysis by SEM. Increased Cr oxidation kinetics was observed in the as-polished sample with the native oxide film resulting in formation of an overall more protective and compact film compared to the cathodically-activated sample. Electrochemical analysis showed that corrosive attack varied between dislocation cell boundaries to cell interiors depending on the initial surface state and polarization conditions. In conclusion, a corrosion mechanism is proposed to explain this variation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A kinetic model for simulating non-equilibrium mass transport in oxides applied to hematite growth under irradiation

We propose an approach to simulating the dynamic evolution and transport of charged point defects within and through the oxide scales that form during corrosion. The method follows the cluster dynamics formalism widely adopted for radiation damage in solids, which can apply in both quasi-static and far from equilibrium conditions, such as in radiation environments. By treating each charged defect as a cluster of an atomic defect and associated unit charges, the proposed model flexibly allows charge state transitions and shifts in the Fermi level by absorption and emission of charge carriers from point defects in a reaction network with rates constrained by local equilibrium. Applying this model to hematite predicts changes in self-diffusion and oxidation kinetics in irradiation environments, surprisingly showing reduced oxidation rates in many conditions, despite enhanced self-diffusion. In conclusion, the origin of this effect lies in a change in Fermi level induced by excess vacancies formed under irradiation, which in turn suppresses the transport of cation interstitials which facilitate hematite growth.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Order-disorder behavior at thin film oxide interfaces

Order-disorder processes fundamentally determine the structure and properties of many important oxide systems for energy and computing applications. While these processes have been intensively studied in bulk materials, they are less investigated and understood for nanostructured oxides in highly non-equilibrium conditions. These systems can now be realized through a range of deposition techniques and probed at exceptional spatial and chemical resolution, leading to a greater focus on interface dynamics. In this work, we survey a selection of recent studies of order-disorder behavior at thin film oxide interfaces, with a particular emphasis on the emergence of order during synthesis and disorder in extreme irradiation environments. We summarize key trends and identify directions for future study in this growing research area.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Networks of electrochemical oxidation of common lithium-ion Battery solvents revealed by NMR spectroscopy

Raising the upper cutoff voltage of lithium-ion batteries (LIBs) to increase energy density often exceeds the electrolyte’s anodic stability limit, accelerating degradation and creating a major durability tradeoff. Designing electrolytes that can sustain long-term high-voltage cycling requires a clearer understanding of the fundamental mechanisms occurring when commercial carbonate solvents oxidize. Here, to this end, simplified single-salt, single-solvent formulations of LiClO 4 and LiPF 6 in dimethyl carbonate (DMC), ethylene carbonate (EC), or ethyl methyl carbonate (EMC) were anodically electrolyzed on inert electrodes and monitored for extended periods of time using 1 H, 13 C, 19 F, and 35 Cl nuclear magnetic resonance (NMR) spectroscopy. The controlled environment of the experiments, coupled to the unique sensitivity of NMR, unveiled novel metastable intermediates and the formation of branching networks of products with temporal evolution. Oxidation of the pristine solvent primarily proceeds through a radical pathway that also produces highly reactive protons but faces competition from a second pathway involving a radical carbocation intermediate. In all cases, the intermediates follow a variety of downstream pathways that can intersect with each other. The concomitant network of reactions represents a significant increase in complexity compared to common descriptions in the literature, yet, critically, it helps explain the wide range of products typically identified in electrolyte oxidation in complete cells. The results highlight the need for refocusing fundamental research on anodic stability to analysis of the hierarchy of reaction networks to better inform efforts to mitigate the detrimental effects on battery performance, including prevention and harvesting of proton and radical products.

Electrolytes↗
DOE OSTI2023

The effect of composition, temperature and pressure on the oxidation state and coordination environment of copper in silicate melts

Copper is a redox variable element that may occur as Cu 0 , Cu + , and Cu 2+ in the Earth’s crust. The oxidation state will affect its partitioning between coexisting minerals, melts and fluids and hence its behaviour in magmatic processes. Copper bearing silicate glasses were quenched from melts with 23 synthetic compositions (19 CaO-Na 2 O-MgO-Al 2 O 3 -SiO 2 (CNMAS), two “granites” containing K 2 O ± H 2 O, and Fe-bearing “MORB” and “andesite”) equilibrated at oxygen fugacities (fO 2 ), expressed in log units relative to the fayalite-magnetite-quartz (FMQ) buffer, ranging from −0.7 to 14, temperatures from 900 to 1500 °C and pressures from 0 to 2.5 GPa. Cu K-edge X-ray absorption near edge structure (XANES) spectra were recorded from the glasses and a pre-edge feature in the XANES spectra was found to scale with the proportion of Cu + . Cu + /ΣCu (where ΣCu = Cu + + Cu 2+ ) was quantified by fitting the intensity of the pre-edge feature as a function of fO 2 to the thermodynamically expected relationship. Cu + /ΣCu was found to only weakly depend on melt composition, with more basic melts (e.g., basalts rather than granites) preferentially stabilising Cu 2+ . Increasing temperature stabilises Cu + , while increasing pressure had little effect on Cu + /ΣCu in CNMAS melts but preferentially stabilised Cu 2+ in granite melts. Cu + /ΣCu can be predicted in silicate melts by the empirical equation: log(Cu 2+ /Cu + ) = 0.25(ΔFMQ + 8.58 − 25050/T + 940P/T – 0.02P) − 4.73 + 5400/T + 1.99Λ + (280P – 90P2) where T is temperature in K, P is pressure in GPa and is the optical basicity of the composition. The effects of fO 2 , melt composition, temperature and pressure on Cu + /ΣCu indicate that Cu + will be the dominant oxidation state in terrestrial silicate melts (e.g., Cu + /ΣCu = 99% in an andesitic melt at 900 °C, 1 GPa and ΔFMQ = 1). The electron exchange reaction Cu 2+ + Fe 2+ → Cu + + Fe 3+ occurs on cooling and, given the abundance of Fe in natural melts, the oxidation state of Cu in natural glasses is unlikely to correspond to that in the original melt.

Copper↗
DOE OSTI2023

Role of carbon treating in piperazine oxidation

Bench-scale experiments were performed to test the effects of carbon treating (8 × 30 mesh, lignite-based granular activated carbon from Nowata Filtration) on the oxidation of aqueous piperazine (PZ) at conditions of CO 2 capture. The combined mitigation with carbon treating and N 2 sparging was also tested. When carbon treating is applied, the UV–Vis absorbance at 320 nm, the NH 3 production rate, and the accumulation rate of dissolved Fe concentration and total formate concentration decrease. The effects of carbon treating last even when the carbon is bypassed, which is possibly due to the removal of catalytic degradation products. Therefore, it is better to apply carbon treating in the early stages of oxidation. Combining carbon treating and nitrogen sparging is more effective in oxidation mitigation than applying the methods separately. The amount of Fe removed by the carbon bed is greater than the result calculated from the solvent inventory and concentration difference of Fe in solvent, indicating that Fe colloids or other “soluble” Fe will dissolve into the solvent and replace the dissolved Fe that is adsorbed and removed. Furthermore, the carbon removes the degradation products that can complex with Fe 3+ , even if they are not complexed. Since the source of Fe includes fly ash and corrosion, removing the complexing agents instead of all the available Fe is a more feasible target.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

In-situ and ex-situ comparison of the electrochemical oxidation of SO 2 on carbon supported Pt and Au catalysts

Electrochemical characterizations are performed using thin films and commercial carbon supported platinum and gold catalysts for sulfur dioxide oxidation, the primary electrochemical oxidation reaction in the Hybrid-sulfur (HyS) thermochemical process. Electrochemical evaluation of metal thin films qualitatively confirms the higher activity of Au over Pt, AuPt, Pd, and Ir for the electrochemical oxidation of SO 2 . Ex-situ testing, using rotating disk electrode (RDE), shows an earlier onset potential for Au/C at low sulfuric acid concentrations (C ≤ 3.5 M) and a higher turnover frequency than Pt/C at sulfuric acid concentrations ranging from 3.5 M to 9 M. In-situ electrolysis experiments using low catalyst loadings (0.1 mg Au cm –2 , a factor of ≥5 lower than typical loadings) confirm that Au nanoparticles exhibit higher current densities and greater stability than Pt nanoparticles. This is consistent with the thin film screening studies, which showed higher activity with increasing gold content in AuPt thin films. Here, this work reveals an alternative material to state-of-the-art Pt to lower the energy needs and aid the HyS cycle in reaching the target of $2/kg H 2 set forth by the Department of Energy to achieve economic feasibility of large-scale hydrogen generation.

08 HYDROGEN↗
DOE OSTI2020

A Physically-Based Model for Thermo-Oxidative and Hydrolytic Aging of Elastomers

A computationally efficient model is proposed to capture the loss of mechanical performance due to chemical aging that are formed as the competition of chain scission and cross-link formation/dissolution, such as thermo-oxidative aging or hydrolytic aging. The model should be considered an extension of our recent models [1, 2, 3] which further simplifies the matrix behavior based on the assumption of independence of environmental and mechanical damage. The model uses this assumption to reduce the necessary material parameters needed to model constitutive and inelastic behavior of elastomers during aging. To this end, the model can provide accurate predictions of the material performance with the significantly fewer number of fitting parameters. The model is relevant for all decay mechanisms formed by the occurrence of two simultaneous micro-mechanisms; (i) formation/reduction of the cross-links, and (ii) chain scission, both of which are present in thermo-oxidation and hydrolytic aging. Assuming the alteration of the chain density along the aging trajectory is identical to the peroxide cross-link density for thermo-oxidation, and the change of the average molecular weight for hydrolysis, the strain energy of polymer matrix can be rewritten as a function of deformation, deformation history, storage time and aging temperature. Next, the modified network alteration model is formulated for implementation into Finite Element (FE) simulations. The model is built on the presumption of homogeneous and consistent oxygen/water absorption and thus is mainly relevant for relatively thin samples exposed to environmental loads for a long time. The proposed model includes only six physically inspired material parameters. Therefore, while it is computationally efficient, it shows good agreement with own experimental data, which performed on various range of accelerated aging temperatures and times. With respect to its computational efficiency, simplicity, accuracy, and interpret-ability, the model is the right choice for advanced implementations in FE programs.

42 ENGINEERING↗
DOE OSTI2021

High stability of flexible perovskite transparent conductive oxide film via van der Waals heteroepitaxy

Transparent conducting oxides (TCOs), such as indium-tin oxide (ITO) and indium gallium zinc oxide (IGZO), are essential components in the design of flexible optoelectronic devices. However, it is still a challenge to prepare low-cost flexible transparent conductive film for achieving the flexible functionality together with high optical transparency and electrical conductivity. Herein, fluorphlogopite (mica) is selected as the bendable and transparent substrate for the fabrication of low-cost perovskite CaVO 3 TCO epitaxial film. Benefitting from thin mica substrate with high Young’s modulus of 200 GPa, flexible CaVO 3 TCO epitaxial film exhibits high mechanical stability in terms of electrical conductivity and optical transparency after bending up to 10 5 cycles. The change of resistance can reflect the bending curvature and strain state. Finally, our results provide a new pathway to design superior mechanical flexibility and stability CaVO 3 TCO films for application in flexible, light-weight, and portable smart optoelectronic devices.

36 MATERIALS SCIENCE↗