Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Absence of Off-Diagonal Long-Range Order in hcp 4 He Dislocation Cores

Here, the mass transport properties along dislocation cores in hcp 4 He are revisited by considering two types of edge dislocations as well as a screw dislocation, using a fully correlated quantum simulation approach. Specifically, we employ the zero-temperature path-integral ground state (PIGS) method together with ergodic sampling of the permutation space to investigate the fundamental dislocation core structures and their off-diagonal long-range order properties. It is found that the Bose-Einstein condensate fraction of such defective 4 He systems is practically null (≤ 10 –6 ), just as in the bulk defect-free crystal. These results provide compelling evidence for the absence of intrinsic superfluidity in dislocation cores in hcp 4 He and challenge the superfluid dislocation-network interpretation of the mass-flux-experiment observations, calling for further experimental investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Guided search for desired functional responses via Bayesian optimization of generative model: Hysteresis loop shape engineering in ferroelectrics

Advances in theoretical modeling across multiple disciplines have yielded generative models capable of high veracity in predicting macroscopic functional responses of materials emerging as a result of complex non-local interactions. Correspondingly, of interest is the inverse problem of finding the model parameter that will yield desired macroscopic responses, such as stress–strain curves, ferroelectric hysteresis loops, etc. Here, we suggest and implement Gaussian process based methods that allow to effectively sample the degenerate parameter space of a complex non-local model to output regions of parameter space which yield desired functionalities. In this work, we discuss the specific adaptation of the acquisition function and sampling function to make the process efficient and balance the efficient exploration of parameter space for multiple possible minima and exploitation to densely sample the regions of interest where target behaviors are optimized. Additionally, this approach is illustrated via the hysteresis loop engineering in ferroelectric materials but can be adapted to other functionalities and generative models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Synthesis of Zn2NbN3 ternary nitride semiconductor with wurtzite-derived crystal structure

Binary III-N nitride semiconductors with wurtzite crystal structure such as GaN and AlN have been long used in many practical applications ranging from optoelectronics to telecommunication. The structurally related ZnGeN2 or ZnSnN2 derived from the parent binary compounds by cation mutation (elemental substitution) have recently attracted attention, but such ternary nitride materials are mostly limited to II-IV-N2 compositions. This paper demonstrates synthesis and characterization of zinc niobium nitride (Zn2NbN3) – a previously unreported II2-V-N3 ternary nitride semiconductor. The Zn2NbN3 thin films are synthesized using a one-step adsorption-controlled growth, and a two-step deposition/annealing method that suppresses the loss of Zn and N. Measurements indicate that this sputtered Zn2NbN3 crystalizes in cation-disordered wurtzite-derived structure, in contrast to chemically related rocksalt-derived Mg2NbN3 compound, also synthesized here for comparison using the two-step method. The estimated wurtzite lattice parameter ratio of Zn2NbN3 is 1.55, and the optical absorption onset is at 2.1 eV. Both of these values are lower compared to published Zn2NbN3 computational values of c/a = 1.62 and Eg = 3.5 - 3.6 eV. Additional theoretical calculations indicate that this difference is due to cation disorder in experimental samples, suggesting a way to tune the structural parameters and the resulting properties of heterovalent ternary nitride materials. Overall, this work expands the wurtzite family of nitride semiconductors to include Zn2NbN3, and suggests that related II2-V-N3 and other ternary nitrides should be possible to synthesize.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Scanning Tunneling Thermometry

The best spatial resolution so far achieved in thermal imaging is several nanometers, much coarser than routinely achieved for other physical properties. Here we propose a method to map electronic temperature variations in operating nanoscale conductors by relying solely upon electrical tunneling current measurements. The proposed measurement scheme involves two scanning probe operations to measure the conductance and thermopower, respectively. These two measurements are shown to determine the local temperature with high accuracy in nanoscale conductors, where the Wiedemann-Franz law holds quite generally. We report the proposed scanning tunneling thermometer, owing to its operation in the tunneling regime, would be capable of mapping temperature variations with subnanometer resolution, thereby enhancing the resolution of scanning thermometry by some 2 orders of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Electronic topological transitions in cadmium under pressure studied via theoretical and experimental x-ray absorption spectroscopy

Here, an electronic topological transition (ETT) in cadmium below 1 GPa is investigated in situ with experimental x-ray absorption spectroscopy and projecting calculated core-valence excitons onto the band structure. These projections are a useful application of the Bethe-Salpeter equation approach that considers many-body effects. The method described herein can be used for systems that are otherwise difficult to probe in situ; therefore, it provides a generalizable approach to identifying and understanding ETTs under high pressure. Although pressure-induced ETTs are often probed using indirect structural responses, our own x-ray diffraction and Raman studies suggest a second-order structural transition around 3 GPa but are largely insensitive to or inconclusive for the previously studied ETT in this region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Laser-induced forces on atoms during ultrafast demagnetization

Laser-induced femtosecond demagnetization has attracted a broad attention as a possible candidate for information storage technology. However, whether or not lattice vibration directly participates in demagnetization has been highly controversial over a decade. A recent electron diffraction experiment attributed the demagnetization to the polarized phonon effect, but a similar x-ray diffraction experiment attributed it to the Einstein–de Haas effect. Common to both experiments is that neither the angular momentum of the lattice nor the rotation of the sample was directly probed. Here, we report our first first-principles calculation of forces on atoms induced by an ultrafast laser during ultrafast demagnetization. We employ two complementary methods: (i) the frozen lattice with electronic excitation and (ii) frozen excitation but moving the lattice. We find that the forces on atoms start at –50 fs and peak around 30 fs. The magnitude of the force is far smaller than the empirical estimates. Within the limit of our theory, our results suggest that the polarized phonon effect and the Einstein–de Haas effect are unlikely to be the main course of demagnetization. As a result, we expect that our finding has a profound impact on the future direction of laser-induced dynamics in magnetic and quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

High pressure chemical reactivity and structural study of the Na–P and Li–P systems

In this work, the Na–P and Li–P chemical systems were studied under pressure using synchrotron X-ray diffraction in a diamond anvil cell up to 20 GPa, combined with the AIRSS ab initio random structure searching technique. The results reveal an enhanced reactivity of both alkali metals with phosphorous at slightly elevated pressures. This enables the synthesis of Li 3 P and Na 3 P at room temperature (RT) starting from element precursors, bypassing the established chemical synthesis methods. Both compounds undergo a pressure-induced phase transition from the hexagonal Na 3 As-type structure (stable at ambient conditions) towards a Fm m (FCC) structure that remains stable up to 20 GPa. Attempts to synthesize compounds with higher alkali metal content (such as Li 5 P) using high-temperature and -pressure conditions (up to 2000+ K and 30 GPa), inspired by recent theoretical predictions, were not successful.

25 ENERGY STORAGE↗
DOE OSTI2020

Glide-resolved photoemission spectroscopy: Measuring topological invariants in nonsymmorphic space groups

The two classes of 3D, time-reversal-invariant insulators are known to subdivide into four classes in the presence of glide symmetry. Here, we extend this classification of insulators to include glide-symmetric Weyl metals and find a finer $\mathbb{Z}_4 ⊕\mathbb {Z}$ classification. We further elucidate the smoking-gun experimental signature of each class in the photoemission spectroscopy of surface states. Measuring the $\mathbb{Z}_4$ topological invariant by photoemission relies on identifying the glide representation of the initial Bloch state before photoexcitation—we show how this is accomplished with relativistic selection rules, combined with standard spectroscopic techniques to resolve both momentum and spin. In this work, our method relies on a spin-momentum locking that is characteristic of all glide-symmetric solids (inclusive of insulators and metals in trivial and topological categories). As an orthogonal application, given a glide-symmetric solid with an ideally symmetric surface, we may utilize this spin-momentum locking to generate a source of fully spin-polarized photoelectrons, which have diverse applications in solid-state spectroscopy. Our ab initio calculations predict Ba 2 Pb, stressed Na 3 Bi, and KHgSb to realize all three, nontrivial insulating phases in the $\mathbb{Z}_4$ classification.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Coherent correlation imaging for resolving fluctuating states of matter

Fluctuations and stochastic transitions are ubiquitous in nanometre-scale systems, especially in the presence of disorder. However, their direct observation has so far been impeded by a seemingly fundamental, signal-limited compromise between spatial and temporal resolution. Here we develop coherent correlation imaging (CCI) to overcome this dilemma. Our method begins by classifying recorded camera frames in Fourier space. Contrast and spatial resolution emerge by averaging selectively over same-state frames. Temporal resolution down to the acquisition time of a single frame arises independently from an exceptionally low misclassification rate, which we achieve by combining a correlation-based similarity metric with a modified, iterative hierarchical clustering algorithm. We apply CCI to study previously inaccessible magnetic fluctuations in a highly degenerate magnetic stripe domain state with nanometre-scale resolution. We uncover an intricate network of transitions between more than 30 discrete states. Our spatiotemporal data enable us to reconstruct the pinning energy landscape and to thereby explain the dynamics observed on a microscopic level. CCI massively expands the potential of emerging high-coherence X-ray sources and paves the way for addressing large fundamental questions such as the contribution of pinning and topology in phase transitions and the role of spin and charge order fluctuations in high-temperature superconductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Separation of Artifacts from Spin–Torque Ferromagnetic Resonance Measurements of Spin–Orbit Torque for the Low–Symmetry Van der Waals Semi–Metal ZrTe 3

Spin-orbit torques generated by exfoliated layers of the low-symmetry semi-metal ZrTe 3 are measured using the spin-torque ferromagnetic resonance (ST-FMR) technique. When the ZrTe 3 has a thickness greater than about 10 nm, artifacts due to spin pumping and/or resonant heating can cause the standard ST-FMR analysis to overestimate the true magnitude of the torque efficiency by as much as a factor of 30, and to indicate incorrectly that the spin-orbit torque depends strongly on the ZrTe 3 layer thickness. Artifact-free measurements can still be achieved over a substantial thickness range by the method developed recently to detect ST-FMR signals in the Hall geometry as well as the longitudinal geometry. ZrTe 3 /Permalloy samples generate a conventional in-plane anti-damping spin torque efficiency ξ$^{FL}_{∥}$ = 0.014 ± 0.004, and an unconventional in-plane field-like torque efficiency |ξ$^{FL}_{∥}$| = 0.003 ± 0.001. As a result, the out-of-plane anti-damping torque is negligible. It is suggested that artifacts similarly interfere with the standard ST-FMR analysis for other van der Waals samples thicker than about 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Identification of non-Fermi liquid fermionic self-energy from quantum Monte Carlo data

Quantum Monte Carlo (QMC) simulations of correlated electron systems provide unbiased information about system behavior at a quantum critical point (QCP) and can verify or disprove the existing theories of non-Fermi liquid (NFL) behavior at a QCP. However, simulations are carried out at a finite temperature, where quantum critical features are masked by finite-temperature effects. Here, we present a theoretical framework within which it is possible to separate thermal and quantum effects and extract the information about NFL physics at T = 0. We demonstrate our method for a specific example of 2D fermions near an Ising ferromagnetic QCP. We show that one can extract from QMC data the zero-temperature form of fermionic self-energy Σ(ω) even though the leading contribution to the self-energy comes from thermal effects. We find that the frequency dependence of Σ(ω) agrees well with the analytic form obtained within the Eliashberg theory of dynamical quantum criticality, and obeys ω 2/3 scaling at low frequencies. Our results open up an avenue for QMC studies of quantum critical metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Origin of structural degradation in Li-rich layered oxide cathode

Li- and Mn-rich (LMR) cathode materials that utilize both cation and anion redox can yield substantial increases in battery energy density 1,2,3 . However, although voltage decay issues cause continuous energy loss and impede commercialization, the prerequisite driving force for this phenomenon remains a mystery 3,4,5,6 In this work, with in situ nanoscale sensitive coherent X-ray diffraction imaging techniques, we reveal that nanostrain and lattice displacement accumulate continuously during operation of the cell. Evidence shows that this effect is the driving force for both structure degradation and oxygen loss, which trigger the well-known rapid voltage decay in LMR cathodes. By carrying out micro- to macro-length characterizations that span atomic structure, the primary particle, multiparticle and electrode levels, we demonstrate that the heterogeneous nature of LMR cathodes inevitably causes pernicious phase displacement/strain, which cannot be eliminated by conventional doping or coating methods. We therefore propose mesostructural design as a strategy to mitigate lattice displacement and inhomogeneous electrochemical/structural evolutions, thereby achieving stable voltage and capacity profiles. These findings highlight the significance of lattice strain/displacement in causing voltage decay and will inspire a wave of efforts to unlock the potential of the broad-scale commercialization of LMR cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Peculiarities of the formation of photonic nanojets by a matrix of dielectric microtoroids

We report the results of theoretical modelling of photonic nanojets (PNJs) formed by laser radiation scattering on a single-layer ordered assembly of dielectric microtoroids placed on the surface of a transparent matrix (silicone film). Using the method of computational electrodynamics (FDTD), the main PNJ parameters (length, width, peak intensity) are analysed under the conditions of mutual influence of the light fields of neighbouring microparticles. It is shown that the main factor affecting the PNJ characteristics under study is the spatial configuration of the radiation-scattering particle, namely, the internal diameter of its cross section. It is found that for certain configurations of toroid placement in a cluster, a PNJ ensemble is implemented with parameters significantly better than those for a single toroid. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Magnetic properties of alternating Hubbard ladders

We explore the Hubbard Hamiltonian on ladders where the number of sites per rung alternates between two and three. These geometries are bipartite with nonequal or equal number of sites on the two sublattices. Thus they share a key feature of the Hubbard model in a class of lattices which Lieb has shown analytically to exhibit long-range ferrimagnetic order while being amenable to powerful numeric approaches developed for quasi-one-dimensional geometries. The density matrix renormalization group (DMRG) method is used to obtain the groundstate properties, e.g., excitation gaps, charge and spin densities as well as their correlation functions at half filling. We show the existence of long-range ferrimagnetic order in the one-dimensional ladder geometries. Our work provides detailed quantitative results which complement the general theorem of Lieb for generalized bipartite lattices. It also addresses the issue of how the alternation between quasi-long-range order and spin liquid behavior for uniform ladders with odd and even numbers of legs might be affected by a regular alternation pattern.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Kondo Lattice Model of Magic-Angle Twisted-Bilayer Graphene: Hund’s Rule, Local-Moment Fluctuations, and Low-Energy Effective Theory

For this work, we apply a generalized Schrieffer-Wolff transformation to the extended Anderson-like topological heavy fermion (THF) model for the magic-angle (θ=1.05°) twisted bilayer graphene (MATBLG) [Phys. Rev. Lett. 129, 047601 (2022)], to obtain its Kondo lattice limit. In this limit localized $\mathcal{f}$ electrons on a triangular lattice interact with topological conduction $\mathcal{c}$ electrons. By solving the exact limit of the THF model, we show that the integer fillings ν=0, ±1, ±2 are controlled by the heavy $\mathcal{f}$ electrons, while ν=±3 is at the border of a phase transition between two $\mathcal{f}$-electron fillings. For ν=0, ±1, ±2, we then calculate the Ruderman-Kittel-Kasuya-Yosida (RKKY) interactions between the $\mathcal{f}$ moments in the full model and analytically prove the SU(4) Hund’s rule for the ground state which maintains that two $\mathcal{f}$ electrons fill the same valley-spin flavor. Our (ferromagnetic interactions in the) spin model dramatically differ from the usual Heisenberg antiferromagnetic interactions expected at strong coupling. We show the ground state in some limits can be found exactly by employing a positive semidefinite “bond-operators” method. We then compute the excitation spectrum of the $\mathcal{f}$ moments in the ordered ground state, prove the stability of the ground state favored by RKKY interactions, and discuss the properties of the Goldstone modes, the (reason for the accidental) degeneracy of (some of) the excitation modes, and the physics of their phase stiffness. We develop a low-energy effective theory for the $\mathcal{f}$ moments and obtain analytic expressions for the dispersion of the collective modes. We discuss the relevance of our results to the spin-entropy experiments in TBG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Predicting and Controlling Corrosion (Abbreviated Final Report)

Corrosion accumulates significant replacement costs in the transportation, utility, manufacturing, and infrastructure sectors. It also underpins several of LLNL’s core missions in stockpile stewardship, defense, and energy security. Whereas most corrosion and aging models are empirically parameterized to describe well-defined conditions late in the reaction, the factors that determine the early stages of corrosion—during which mitigation could be most impactful— are poorly understood. This project addressed the critical need for new approaches to predict the kinetics of corrosion initiation based on firm physical and chemical understanding. The activities encompassed degradation of relevant metals in both hydrogen-rich and environmental corrosion scenarios. The team integrated state-of-the-art multiscale simulation, in situ characterization, and data science within three technical thrusts: hydriding of Ti alloys; aqueous corrosion of Al and Ni-Cr alloys; and degradation of additively manufactured 316L stainless steel. In each case, novel capabilities were developed to identify and track the impacts of key atomistic, compositional, and microstructural features on the metal systems. For hydriding, protocols were developed to tightly integrate multiscale models, advanced multimodal characterization, and machine learning to determine how hydrogen interacts with native passivating surface oxides and nucleates new undesired phases, shedding new light on the critical role of grain boundaries, interfaces, and atomically disordered regions. For aqueous corrosion, the project demonstrated methods to predict dissolution rates of metal surfaces in corrosive solutions, to measure and understand microstructural and grain orientation effects on corrosion susceptibility, and to investigate competing growth and dissolution kinetics of surface oxides. For additively manufactured metals, analysis using state-of-the-art microscopy techniques revealed the role of specific heterogeneities invoked during laser processing, including cellular structure, dislocations, and precipitates, on corrosion susceptibility. In addition to new capabilities and understanding, the project provided an avenue for workforce development, as well as key partnerships with stakeholders in corrosion science.

08 HYDROGEN↗
DOE OSTI2026

Electric field dependence of nanoscale cathodoluminescence inside Cr doped β-Ga 2 O 3 interfaces

Chromium (Cr) is a common impurity in β-Ga 2 O 3 crystals, where its characteristic R1 and R2 luminescence lines are susceptible to both the host crystal field and externally applied fields. Here, in this work, we demonstrate that the Cr cathodoluminescence (CL) quenches toward the bulk of the crystal but enhances with applied reverse bias, reflecting the effect of free carrier depletion with increasing electric field. Furthermore, we illustrate that the R1/R2 CL intensity ratio, measured as the integrated area ratio of R1 to R2, can be used as a direct probe of the electric field in a Ni-β-Ga 2 O 3 : Cr Schottky diode. This optical calibration method provides a complementary approach to conventional C–V and I–V measurements for determining electric field strength in the depletion region of β-Ga 2 O 3 -based Schottky diodes and can be extended to other semiconductors and multilayer device structures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Technology of thin-rod Yb : YAG amplifiers with a high pulse energy and average power

Technology for producing thin-rod Yb : YAG laser amplifiers is improved, which is aimed at increasing the output pulse energy and includes the development of a new method for mounting active elements into a cooling system and employment of more persistent dielectric coatings of rod ends. An influence of a thermal lens on the beam size in an active element is theoretically studied and the parameters are found, which provide equal beam sizes at input and output rod ends. The output pulse energy of 4 mJ is obtained without optical breakdown of the output end, which substantially exceeds the previously obtained results. The amplifier demonstrates an average power of 60 W and maintains a high beam quality. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗