Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mask”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Application of cabin atmosphere monitors to rapid screening of breath samples for the early detection of disease states

Analysis of human breath is a nonintrusive method to monitor both endogenous and exogenous chemicals found in the body. Several technologies were investigated and developed which are applicable to monitoring some organic molecules important in both physiological and pathological states. Two methods were developed for enriching the organic molecules exhaled in the breath of humans. One device is based on a respiratory face mask fitted with a polyethylene foam wafer; while the other device is a cryogenic trap utilizing an organic solvent. Using laboratory workers as controls, two organic molecules which occurred in the enriched breath of all subjects were tentatively identified as lactic acid and contisol. Both of these substances occurred in breath in sufficient amounts that the conventional method of gas-liquid chromatography was adequate for detection and quantification. To detect and quantitate trace amounts of chemicals in breath, another type of technology was developed in which analysis was conducted using high pressure liquid chromatography and mass spectrometry.

Valentine, J. L.↗
NASA NTRS1975

Development of an economical silicon solar cell

The growth of electronically viable silicon films on inexpensive foreign substrates is studied, with the objective of creating a technology to radically reduce the overall cost of the silicon employed in photovoltaic solar energy conversion. The approach employed is to enhance crystalline ordering during film nucleation by confining arriving silicon atoms to a narrow band traveling across a substrate, i.e., the Lateral Growth Technique (LGT). The efforts have employed physical vapor deposition of silicon in a vacuum evaporator on glass and metal substrates with both slit masks and single defining edges, and subsequent chemical vapor deposition (CVD) of thicker films on these thin film structures by pyrolysis of silane at higher temperatures.

Lindmayer, J.↗
NASA NTRS1975

CdS thin film solar cells for terrestrial power

The development of very low cost long lived Cu2S/CdS thin film solar cells for large scale energy conversion is reported. Excellent evaporated metal grid patterns were obtained using a specially designed aperture mask. Vacuum evaporated gold and copper grids of 50 lines per inch and 1 micron thickness were adequate electrically for the fine mesh contacting grid. Real time roof top sunlight exposure tests of encapsulated CdS cells showed no loss in output after 5 months. Accelerated life testing of encapsulated cells showed no loss of output power after 6 months of 12 hour dark-12 hour AMI illumination cycles at 40 C, 60 C, 80 C and 100 C temperatures. However, the cells changed their basic parameters, such as series and shunt resistance and junction capacitance.

Shirland, F. A.↗
NASA NTRS1975

Compressed air demand-type firefighter's breathing system, volume 1

The commercial availability of lightweight high pressure compressed air vessels has resulted in a lightweight firefighter's breathing apparatus. The improved apparatus, and details of its design and development are described. The apparatus includes a compact harness assembly, a backplate mounted pressure reducer assembly, a lightweight bubble-type facemask with a mask mounted demand breathing regulator. Incorporated in the breathing regulator is exhalation valve, a purge valve and a whistle-type low pressure warning that sounds only during inhalation. The pressure reducer assembly includes two pressure reducers, an automatic transfer valve and a signaling device for the low pressure warning. Twenty systems were fabricated, tested, refined through an alternating development and test sequence, and extensively examined in a field evaluation program. Photographs of the apparatus are included.

Sullivan, J. L.↗
NASA NTRS1975

Measuring snow cover using satellite imagery during 1973 and 1974 melt season: North Santiam, Boise, and Upper Snake Basins, phase 1

Measurements are examined of snow coverage during the snow-melt season in 1973 and 1974 from LANDSAT imagery for the three Columbia River Subbasins. Satellite derived snow cover inventories for the three test basins were obtained as an alternative to inventories performed with the current operational practice of using small aircraft flights over selected snow fields. The accuracy and precision versus cost for several different interactive image analysis procedures was investigated using a display device, the Electronic Satellite Image Analysis Console. Single-band radiance thresholding was the principal technique employed in the snow detection, although this technique was supplemented by an editing procedure involving reference to hand-generated elevation contours. For each data and view measured, a binary thematic map or "mask" depicting the snow cover was generated by a combination of objective and subjective procedures. Photographs of data analysis equipment (displays) are shown.

Wiegman, E. J.↗
NASA NTRS1975

Study of sea ice in the Sea of Okhotsk and its influence on the Oyashio current

The author has identified the following significant results. Two photographic techniques were applied to Skylab S190A multispectral pictures for extracting oceanic patterns at the sea surface separately from cloud patterns. One is the image-masking technique and another a stereographic analysis. The extracted oceanic patterns were interpreted as areas where the amount, or the concentration of phytoplankton was high by utilizing surface data of water temperature, ocean current by GEK, and microplankton.

Watanabe, K.↗
NASA NTRS1976

High and low threshold P-channel metal oxide semiconductor process and description of microelectronics facility

The fabrication techniques and detail procedures for creating P-channel Metal-Oxide-Semiconductor (P-MOS) integrated circuits at George C. Marshall Space Flight Center (MSFC) are described. Examples of P-MOS integrated circuits fabricated at MSFC together with functional descriptions of each are given. Typical electrical characteristics of high and low threshold P-MOS discrete devices under given conditions are provided. A general description of MSFC design, mask making, packaging, and testing procedures is included. The capabilities described in this report are being utilized in: (1) research and development of new technology, (2) education of individuals in the various disciplines and technologies of the field of microelectronics, and (3) fabrication of many types of specially designed integrated circuits which are not commercially feasible in small quantities for in-house research and development programs.

Bouldin, D. L.↗
NASA NTRS1976

DJANAL user's manual

The DJANAL (DisJunct ANALyzer) Program provides a means for the LSI designer to format output from the Mask Analysis Program (MAP) for input to the FETLOG (FETSIM/LOGSIM) processor. This document presents a brief description of the operation of DJANAL and provides comprehensive instruction for its use.

Pitts, E. R.↗
NASA NTRS1976

Ion beam sputter modification of the surface morphology of biological implants

The surface chemistry and texture of materials used for biological implants may significantly influence their performance and biocompatibility. Recent interest in the microscopic control of implant surface texture has led to the evaluation of ion beam sputtering as a potentially useful surface roughening technique. Ion sources, similar to electron bombardment ion thrusters designed for propulsive applications, are used to roughen the surfaces of various biocompatible alloys or polymer materials. These materials are typically used for dental implants, orthopedic prostheses, vascular prostheses, and artificial heart components. Masking techniques and resulting surface textures are described along with progress concerning evaluation of the biological response to the ion beam sputtered surfaces.

Weigand, A. J.↗
NASA NTRS1976

Agricultural resources investigations in northern Italy and southern France (Agreste project). Part 1: Activity performed on the Italian test-sites

The author has identified the following significant results. Some qualitative results were obtained out of the experiment of reflectance measurements under greenhouse conditions. An effort was made to correlate phenological stages, production, and radiometric measurements. It was found that the first order effect of exposure variability to sun irradiation is responsible for different rice productivity classes. Effects of rice variety and fertilization become second order, because they are completely masked by the first order effects.

Megier, J.↗
NASA NTRS1975

Apollo and the geology of the moon /Twenty-eighth William Smith Lecture/

Lunar geology evidence is examined for clues to the origin and evolution of the moon and earth. Seven evolutionary episodes, the last covering three billion years to the present day, are constructed for the moon. Parallel episodes in the earth's evolution are masked by the dynamic continuing evolution of the earth over a 4.5 billion year span, in contrast to the moon's quiescence and inability to retain fluids. Comparisons are drawn between the geochemistry and tectonics of the lunar basaltic maria and the earth's ocean basins. Lunar maria rocks differ strikingly in chemical composition from meteoritic matter and solar material. Inundation of frontside lunar maria basins by vast oceans of dark basalt mark the last of the major internally generated evolutionary episodes, and is attributed to consequences of meltdown of the lunar mantle and crust by radioisotope decay from below. Data are drawn primarily from Apollo missions 11-17, supplemented by other sources.

Schmitt, H. H.↗
NASA NTRS1975

Recent advancements in low cost solar cell processing

A proof-of-concept solar cell process has been developed that is adaptable to automation. This involved the development of a new contact system, a new antireflection coating system, a drift field cell design and a new contoured surface treatment. All these processes are performed without the use of vacuum chambers and expensive masking techniques, thus providing the possibility of reduced costs by automation using conventional semiconductor processing machinery. The contacts were printed on the cells by conventional silk screen machinery. The P(+) back field was formed by diffusing in aluminum from a printed aluminum back contact. The antireflection coating was formed by spinning on and baking a TiO2-SiO2 glass film. Air-mass-zero efficiencies of over 10% were achieved using this completely vacuum-free process.

Ralph, E. L.↗
NASA NTRS1975

Periodic variations in stratospheric-mesospheric temperature from 20-65 km at 80 N to 30 S

Results on large-scale periodic variations of the stratospheric-mesospheric temperature field based on Meteorological Rocket Network (MRN) measurements are reported for a long-term (12-year) mean, the quasi-biennial oscillation (QBO), and the first three harmonics of the annual wave (annual wave, semi-annual wave, and terannual wave or 4-month variation). Station-to-station comparisons are tabulated and charted for amplitude and phase of periodic variations in the temperature field. Masking and biasing factors, such as diurnal tides, solar radiation variations, mean monthly variations, instrument lag, aerodynamic heating, are singled out for attention. Models of the stratosphere will have to account for these oscillations of different periods in the thermal field and related properties of the wind fields, with multilayered horizontal stratification with height taken into account.-

Nastrom, G. D.↗
NASA NTRS1976

The long-term intensity behavior of Centaurus X-3

In three years of observation, the X-ray source Cen X-3 appears to alternate between 'high states', with an intensity of 150 counts/s (2-6 keV) or greater, and 'low states', where the source is barely detectable. The time scale of this behavior is of the order of months, and no apparent periodicity has been observed. Analysis of two transitions between these states is reported. During two weeks in July 1972, the source increased from about 20 counts/s to 150 counts/s. The detailed nature of this turn-on is interpreted in terms of a model in which the supergiant's stellar wind decreases in density. A second transition, a turnoff in February 1973, is similarly analyzed and found to be consistent with a simple decrease in accretion rate. The presence of absorption dips during transitions at orbital phases 0.4-0.5 as well as at phase 0.75 is discussed. The data are consistent with a stellar-wind accretion model and with different kinds of extended lows caused by increased wind density masking the X-ray emission or by decreased wind density lowering the accretion rate.

Schreier, E. J.↗
NASA NTRS1976

Three-dimensional interplanetary stream magnetism and energetic particle motion

Cosmic rays interact with mesoscale configurations of the interplanetary magnetic field. A technique is presented for calculating such configurations in the inner solar system, which are due to streams and source conditions near the sun, and maps of magnetic field are constructed for some plausible stream and source conditions. One effect of these mesoscale configurations on galactic cosmic rays is shown to be an out-of-the-ecliptic gradient drift sufficient to explain Forbush decreases. The effects on solar energetic particles include small polar drifts due to the field gradients and a possibly large modification of the time-intensity profiles and anisotropy characteristics due to the formation of mirror configurations in space. If a diffusion model is applicable to solar particles, the true diffusion coefficient will be masked by the effects of streams. A conceptual model which incorporates these ideas and those of several other models is presented.

Barouch, E.↗
NASA NTRS1976

An integrated approach to the remote sensing of floating ice

Review article on remote sensing applications to glaciology. Ice parameters sensed include: ice cover vs open water, ice thickness, distribution and morphology of ice formations, vertical resolution of ice thickness, ice salinity (percolation and drainage of brine; flushing of ice body with fresh water), first-year ice and multiyear ice, ice growth rate and surface heat flux, divergence of ice packs, snow cover masking ice, behavior of ice shelves, icebergs, lake ice and river ice; time changes. Sensing techniques discussed include: satellite photographic surveys, thermal IR, passive and active microwave studies, microwave radiometry, microwave scatterometry, side-looking radar, and synthetic aperture radar. Remote sensing of large aquatic mammals and operational ice forecasting are also discussed.

Campbell, W. J.↗
NASA NTRS1976

Comparison of the crater morphology-size relationship for Mars, moon, and Mercury

Morphology-size data are examined for Martian, Mercurian, and lunar craters. It is shown that both Martian and Mercurian craters exhibit central peaks at lower diameters than those on the moon and that gravity has affected the diameter at which central peaks form on Mars. A quantitative analysis of Martian crater statistics demonstrates that a complete range of crater shapes from small bowl craters to larger and more complex terraced craters occurs on Mars. The complexity of the shapes is found to increase as the sizes of craters increase. It is concluded that aeolian erosion on Mars does not completely mask differences in crater interior structure caused by differences in the gravitational forces on Mars and the moon.

Smith, E. I.↗
NASA NTRS1976

Implementation of Large Scale Integrated (LSI) circuit design software

Portions of the Computer Aided Design and Test system, a collection of Large Scale Integrated (LSI) circuit design programs were modified and upgraded. Major modifications were made to the Mask Analysis Program in the form of additional operating commands and file processing options. Modifications were also made to the Artwork Interactive Design System to correct some deficiencies in the original program as well as to add several new command features related to improving the response of AIDS when dealing with large files. The remaining work was concerned with updating various programs within CADAT to incorporate the silicon on sapphire silicon gate technology.

Kuehlthau, R. L.↗