Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICATION FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

A UNIVERSAL NEUTRAL GAS PROFILE FOR NEARBY DISK GALAXIES

Based on sensitive CO measurements from HERACLES and H I data from THINGS, we show that the azimuthally averaged radial distribution of the neutral gas surface density ({Sigma}{sub HI}+ {Sigma}{sub H2}) in 33 nearby spiral galaxies exhibits a well-constrained universal exponential distribution beyond 0.2 Multiplication-Sign r{sub 25} (inside of which the scatter is large) with less than a factor of two scatter out to two optical radii r{sub 25}. Scaling the radius to r{sub 25} and the total gas surface density to the surface density at the transition radius, i.e., where {Sigma}{sub HI} and {Sigma}{sub H2} are equal, as well as removing galaxies that are interacting with their environment, yields a tightly constrained exponential fit with average scale length 0.61 {+-} 0.06 r{sub 25}. In this case, the scatter reduces to less than 40% across the optical disks (and remains below a factor of two at larger radii). We show that the tight exponential distribution of neutral gas implies that the total neutral gas mass of nearby disk galaxies depends primarily on the size of the stellar disk (influenced to some degree by the great variability of {Sigma}{sub H2} inside 0.2 Multiplication-Sign r{sub 25}). The derived prescription predicts the total gas mass in our sub-sample of 17 non-interacting disk galaxies to within a factor of two. Given the short timescale over which star formation depletes the H{sub 2} content of these galaxies and the large range of r{sub 25} in our sample, there appears to be some mechanism leading to these largely self-similar radial gas distributions in nearby disk galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of Storage Time on the Needed Capture Efficiency for Volatile Radionuclides - 13369

During the processing of used nuclear fuel (UNF), volatile radionuclides will be discharged from the facility stack if no recovery processes are in place to limit their release. The volatile radionuclides of concern are {sup 3}H, {sup 14}C, {sup 85}Kr, and {sup 129}I. There are three key regulations that address the release of these radionuclides to the environment- 40 CFR 61, 40 CFR 190, and 10 CFR 20. These regulations apply to the total radionuclide release and establish dose limits for the maximum exposed individual (MEI) in the public both in terms of whole body dose and dose to specific organs such as the thyroid. Each radionuclide released to the environment contributes to the total dose to some degree. In this paper we attempt to evaluate the efficiency requirements for the capture processes to limit the doses to the MEI to regulatory levels. Since the total amount of each volatile radionuclide present in the UNF changes with the age of the fuel, the respective capture requirements also change with time. Specifically, we are interested in the impact of the decreasing contribution of {sup 3}H and {sup 85}Kr, which have relatively short half-lives, 12.32 y and 10.76 y, respectively, with the increasing age of the fuel (i.e., time between when the UNF is removed from the reactor and the time it is processed) on the capture requirements. In this paper we examine the capture requirements for these four radionuclides for three fuel types (pressurized water reactor [PWR] with uranium oxide fuel [UOX], PWR with mixed oxide fuel [MOX], and an advanced high temperature gas-cooled reactor [AHTGR]), several burnup values, and time out of reactor extending to 200 y. We calculate doses to the MEI with the EPA code CAP-88 and look at two dose contribution cases. In the first case, we assume that the total allowable dose is attributed to only the four volatile radionuclides. This establishes the lowest capture efficiency value possible. Since this is unrealistic, because it assumes zero dose contribution from all other radionuclides, we also examine a second case, where only 10% of the allowable dose is assigned to the four volatile radionuclides. We calculate the required decontamination factors (DFs) for both of these cases for the three fuel types, multiple fuel burnups, and fuel ages and determine whether or not the dose to the whole body or to the thyroid that drives the capture requirements would require additional effluent controls for the shorter half-life volatile radionuclides based on dose considerations. This analysis indicates that the principal isotopes of concern are generally {sup 3}H and {sup 129}I, the latter requiring the highest DFs. The maximum DF value for {sup 129}I is 8000 for the evaluated cases and assumptions used. ∼60 for fresh fuels. The DF for {sup 14}C could be as high as 30 for certain fuels. These values are based on just meeting the regulatory limits, and additional engineering margins (perhaps 3x to 10x or higher) should be applied to provide a safety factor for compliance. However, by assuming less conservative dose allocations, taller stacks, different radionuclide speciation, fuel aging, and other reprocessing facility design and location parameters, the DF requirements could be significantly reduced. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Trade-offs among restored ecosystem functions are context-dependent in Mediterranean-type regions

Global biodiversity hotspots, including Mediterranean-type ecosystems worldwide, are highly threatened by global change that alters biodiversity, ecosystem functions, and services. Some restoration activities enhance ecosystem functions by reintroducing plant species based on known relationships between plant traits and ecosystem processes. Achieving multiple functions across different site conditions, however, requires understanding how abiotic factors like climate and soil, along with plant assemblages, influence ecosystem functions, including their trade-offs and synergies. We used the ModEST ecosystem simulation model, which integrates carbon, water, and nutrient processes with plant traits, to assess the relationships between restored plant assemblages and ecosystem functions in Mediterranean-type climates and soils. We investigated whether maximised carbon increment, water use efficiency, and nitrogen use efficiency, along with their trade-offs and synergies, varied across different abiotic contexts. Further, we asked whether assemblages that maximised functions varied across environments and among these functions. We found that maximised ecosystem carbon increment and nitrogen use efficiency occurred under moist, warm conditions, while water use efficiency peaked under drier conditions. Generally, the assemblage that maximised one function differed from those for other maximised functions. Synergies were rare, except between water and nitrogen use efficiencies in loam soils across most climates. Trade-offs among maximised functions were common, varying in strength with abiotic context and plant assemblages, and were more pronounced in sandy loam soils compared to clay-rich soils. Our findings suggest that due to variation in abiotic conditions within and across Mediterranean-type regions at the global scale, site-specific plant assemblages are required to maximise ecosystem functions. Thus, lessons from a single site cannot be transferred to another site, even where the same plant functional types are available for restoration. Our simulation results offer valuable insights into potential ecosystem performance under specific abiotic conditions following restoration with particular plant functional types, thereby informing local restoration efforts.

54 ENVIRONMENTAL SCIENCES↗

Advancing the surgical implantation of electronic tags in fish: a gap analysis and research agenda based on a review of trends in intracoelomic tagging effects studies

Early approaches to surgical implantation of electronic tags in fish were often through trial and error, however, in recent years there has been an interest in using scientific research to identify techniques and procedures that improve the outcome of surgical procedures and determine the effects of tagging on individuals. Here we summarize the trends in 108 peer-reviewed electronic tagging effect studies focused on intracoleomic implantation to determine opportunities for future research. To date, almost all of the studies have been conducted in freshwater, typically in laboratory environments, and have focused on biotelemetry devices. The majority of studies have focused on salmonids, cyprinids, ictalurids and centrarchids, with a regional bias towards North America, Europe and Australia. Most studies have focused on determining whether there is a negative effect of tagging relative to control fish, with proportionally fewer that have contrasted different aspects of the surgical procedure (e.g., methods of sterilization, incision location, wound closure material) that could advance the discipline. Many of these studies included routine endpoints such as mortality, growth, healing and tag retention, with fewer addressing sublethal measures such as swimming ability, predator avoidance, physiological costs, or fitness. Continued research is needed to further elevate the practice of electronic tag implantation in fish in order to ensure that the data generated are relevant to untagged conspecifics (i.e., no long-term behavioural or physiological consequences) and the surgical procedure does not impair the health and welfare status of the tagged fish. To that end, we advocate for i) rigorous controlled manipulations based on statistical designs that have adequate power, account for inter-individual variation, and include controls and shams, ii) studies that transcend the laboratory and the field with more studies in marine waters, iii) incorporation of knowledge and techniques emerging from the medical and veterinary disciplines, iv) addressing all components of the surgical event, v) comparative studies that evaluate the same surgical techniques on multiple species and in different environments, vi) consideration of how biotic factors (e.g., sex, age, size) influence tagging outcomes, and vii) studies that cover a range of endpoints over ecologically-relevant time periods.

59 BASIC BIOLOGICAL SCIENCES↗

Genistein promotes DNA demethylation of the steroidogenic factor 1 (SF-1) promoter in endometrial stromal cells

Highlights: {yields} Genistein (GEN) is a phytoestrogen found in soy products. {yields} GEN demethylated/unsilenced the steroidogenic factor 1 gene in endometrial tissue. {yields} GEN thus altered mRNA expression in uteri of ovariectomized (OVX) mice. {yields} A high-resolution melting assay was used to screen for epigenetic change. {yields} We isolated an endometrial cell clone that was epigenetically modulated by GEN. -- Abstract: It has recently been demonstrated that genistein (GEN), a phytoestrogen in soy products, is an epigenetic modulator in various types of cells; but its effect on endometrium has not yet been determined. We investigated the effects of GEN on mouse uterine cells, in vivo and in vitro. Oral administration of GEN for 1 week induced mild proliferation of the endometrium in ovariectomized (OVX) mice, which was accompanied by the induction of steroidogenic factor 1 (SF-1) gene expression. GEN administration induced demethylation of multiple CpG sites in the SF-1 promoter; these sites are extensively methylated and thus silenced in normal endometrium. The GEN-mediated promoter demethylation occurred predominantly on the luminal side, as opposed to myometrium side, indicating that the epigenetic change was mainly shown in regenerated cells. Primary cultures of endometrial stromal cell colonies were screened for GEN-mediated alterations of DNA methylation by a high-resolution melting (HRM) method. One out of 20 colony-forming cell clones showed GEN-induced demethylation of SF-1. This clone exhibited a high proliferation capacity with continuous colony formation activity through multiple serial clonings. We propose that only a portion of endometrial cells are capable of receiving epigenetic modulation by GEN.

60 APPLIED LIFE SCIENCES↗

Symplectic multi-particle tracking on GPUs

A symplectic multi-particle tracking model is implemented on the Graphic Processing Units (GPUs) using the Compute Unified Device Architecture (CUDA) language. The symplectic tracking model can preserve phase space structure and reduce non-physical effects in long term simulation, which is important for beam property evaluation in particle accelerators. Though this model is computationally expensive, it is very suitable for parallelization and can be accelerated significantly by using GPUs. In this paper, we optimized the implementation of the symplectic tracking model on both single GPU and multiple GPUs. Using a single GPU processor, the code achieves a factor of 2-10 speedup for a range of problem sizes compared with the time on a single state-of-the-art Central Processing Unit (CPU) node with similar power consumption and semiconductor technology. It also shows good scalability on a multi-GPU cluster at Oak Ridge Leadership Computing Facility. In an application to beam dynamics simulation, the GPU implementation helps save more than a factor of two total computing time in comparison to the CPU implementation.

43 PARTICLE ACCELERATORS↗

A Prolonged Time Interval Between Trauma and Prophylactic Radiation Therapy Significantly Increases the Risk of Heterotopic Ossification

Purpose: To ascertain whether the time from injury to prophylactic radiation therapy (RT) influences the rate of heterotopic ossification (HO) after operative treatment of displaced acetabular fractures. Methods and Materials: This is a single-institution, retrospective analysis of patients referred for RT for the prevention of HO. Between January 2000 and January 2009, 585 patients with displaced acetabular fractures were treated surgically followed by RT for HO prevention. We analyzed the effect of time from injury on prevention of HO by RT. In all patients, 700 cGy was prescribed in a single fraction and delivered within 72 hours postsurgery. The patients were stratified into five groups according to time interval (in days) from the date of their accident to the date of RT: Groups A {<=}3, B {<=}7, C {<=}14, D {<=}21, and E >21days. Results: Of the 585 patients with displaced acetabular fractures treated with RT, (18%) 106 patients developed HO within the irradiated field. The risk of HO after RT increased from 10% for RT delivered {<=}3 days to 92% for treatment delivered >21 days after the initial injury. Wilcoxon test showed a significant correlation between the risk of HO and the length of time from injury to RT (p < 0.0001). Chi-square test and multiple logistic regression analysis showed no significant association between all other factors and the risk of HO (race, gender, cause and type of fracture, surgical approach, or the use of indomethacin). Conclusions: Our data suggest that there is higher incidence and risk of HO if prophylactic RT is significantly delayed after a displaced acetabular fracture. Thus, RT should be administered as early as clinically possible after the trauma. Patients undergoing RT >3 weeks from their displaced acetabular fracture should be informed of the higher risk (>90%) of developing HO despite prophylaxis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Nrf2 protects human bladder urothelial cells from arsenite and monomethylarsonous acid toxicity

Arsenic is widely spread in our living environment and imposes a big challenge on human health worldwide. Arsenic damages biological systems through multiple mechanisms including the generation of reactive oxygen species. The transcription factor Nrf2 regulates the cellular antioxidant response that protects cells from various insults. In this study, the protective role of Nrf2 in arsenic toxicity was investigated in a human bladder urothelial cell line, UROtsa. Using a UROtsa cell line stably infected with Nrf2-siRNA, we clearly demonstrate that compromised Nrf2 expression sensitized the cells to As(III)- and MMA(III)-induced toxicity. On the other hand, the activation of the Nrf2 pathway by tert-butylhydroquinone (tBHQ) and sulforaphane (SF), the known Nrf2-inducers, rendered UROtsa cells more resistant to As(III) and MMA(III). Furthermore, the wild-type mouse embryo fibroblast (WT-MEF) cells were protected from As(III)- and MMA(III)-induced toxicity following Nrf2 activation by tBHQ or SF, whereas neither tBHQ nor SF conferred protection in the Nrf2{sup -/-}MEF cells, demonstrating that tBHQ- or SF-mediated protection against As(III)- and MMA(III)-induced toxicity depends on Nrf2 activation. These results, obtained by both loss of function and gain of function analyses, clearly demonstrate the protective role of Nrf2 in arsenic-induced toxicity. The current work lays the groundwork for using Nrf2 activators for therapeutic and dietary interventions against adverse effects of arsenic.

60 APPLIED LIFE SCIENCES↗

Wet extraction of heavy metals and chloride from MSWI and straw combustion fly ashes

Fly ash residues from combustion often do not meet the criteria neither for reuse as construction materials nor landfilling as non-hazardous waste, mainly because of the high concentration of heavy metals and chlorides. This work aimed to technically evaluate an innovative wet treatment process for the extraction of chloride (Cl{sup -}), cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn) from fly ashes from a municipal solid waste incineration (MSWI) plant and from a straw combustion (SC) facility. Factors investigated were liquid/solid (L/S) ratio, full carbonation (CO{sub 2} treatment), influence of pH and leaching time, using a two-level full factorial design. The most significant factor for all responses was low pH, followed by L/S ratio. Multiple linear regression models describing the variation in extraction data had R{sup 2} values ranging from 58% to 98%. An optimization of the element extraction models was performed and a set of treatment conditions is suggested.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Multi-Stage Wear Model for Grid-to-Rod Fretting of Nuclear Fuel Rods

The wear of fuel rod cladding against the supporting structures in the cores of pressurized water nuclear reactors (PWRs) is an important and potentially costly tribological issue. Grid-to-rod fretting (GTRF), as it is known, involves not only time-varying contact conditions, but also elevated temperatures, flowing hot water, aqueous tribo-corrosion, and the embrittling effects of neutron fluences. The multi-stage, closed-form analytical model described in this paper relies on published out-of-reactor wear and corrosion data and a set of simplifying assumptions to portray the conversion of frictional work into wear depth. The cladding material of interest is a zirconium-based alloy called Zircaloy-4, and the grid support is made of a harder and more wear-resistant material. Focus is on the wear of the cladding. The model involves an incubation stage, a surface oxide wear stage, and a base alloy wear stage. The wear coefficient, which is a measure of the efficiency of conversion of frictional work into wear damage, can change to reflect the evolving metallurgical condition of the alloy. Wear coefficients for Zircaloy-4 and for a polyphase zirconia layer were back-calculated for a range of times required to wear to a critical depth. Inputs for the model, like the friction coefficient, are taken from the tribology literature in lieu of in-reactor tribological data. Concepts of classical fretting were used as a basis, but are modified to enable the model to accommodate the complexities of the PWR environment. Factors like grid spring relaxation, pre-oxidation of the cladding, multiple oxide phases, gap formation, impact, and hydrogen embrittlement are part of the problem definition but uncertainties in their relative roles limits the ability to validate the model. Sample calculations of wear depth versus time in the cladding illustrate how GTRF wear might occur in a discontinuous fashion during months-long reactor operating cycles. A means to account for grid/rod gaps and repetitive impact effects on GTRF wear is proposed

fretting↗

Controlling the Activity and Stability of Electrochemical Interfaces Using Atom-by-Atom Metal Substitution of Redox Species

Understanding the molecular-level properties of electrochemically active ions at operating electrode–electrolyte interfaces (EEI) is key to the rational development of high-performance nanostructured surfaces for applications in energy technology. An electrochemical cell coupled with ion soft landing is employed to examine the effect of “atom-by-atom” metal substitution on the activity and stability of well-defined redox-active anions, PMo x W 12–x O 40 3– (x = 0, 1, 2, 3, 6, 9, or 12) at nanostructured ionic liquid EEI. A striking observation made by in situ electrochemical measurements and further supported by theoretical calculations is that the substitution of only one to three tungsten atoms by molybdenum atoms in the PW 12 O 40 3– anions results in a substantial spike in their first reduction potential. Specifically, PMo 3 W 9 O 40 3– showed the highest redox activity in both in situ electrochemical measurements and as part of a functional redox supercapacitor device, making it a “super-active redox anion” compared with all other PMo x W 12–x O 40 3– species. Electronic structure calculations showed that metal substitution in PMo x W 12–x O 40 3– causes the lowest unoccupied molecular orbital (LUMO) to protrude locally, making it the “active site” for reduction of the anion. Several critical factors contribute to the observed trend in redox activity including (i) multiple isomeric structures populated at room temperature, which affect the experimentally determined reduction potential; (ii) substantial decrease of the LUMO energy upon replacement of W atoms with more-electronegative Mo atoms; and (iii) structural relaxation of the reduced species produced after the first reduction step. Our results illustrate a path to achieving superior performance of technologically relevant EEIs in functional nanoscale devices through understanding of the molecular-level electronic properties of specific electroactive species with “atom-by-atom” precision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative Effects Drive Water Oxidation Catalysis in Cobalt Electrocatalysts through the Destabilization of Intermediates

A barrier to understanding the factors driving catalysis in the oxygen evolution reaction (OER) is understanding multiple over- lapping redox transitions in the OER catalysts. The complexity of these transitions obscure the relationship between the coverage of adsorbates and OER kinetics, leading to an experimental challenge in measuring activity descriptors, such as binding energies, as well as adsorbate interactions, which may destabilize intermediates and modulate their binding energies. Herein, we utilize a newly designed optical spectroelectrochemistry system to measure these phenomena in order to contrast the behavior of two electrocatalysts, cobalt oxyhydroxide (CoOOH) and cobalt-iron hexacyanoferrate (cobalt-iron Prussian blue, CoFe-PB). Three distinct optical spectra are observed in each catalyst, corresponding to three separate redox transitions, the last of which we show to be active for the OER using time-resolved spectroscopy and electrochemical mass spectroscopy. By combining predictions from density functional theory with parameters obtained from electroadsorption isotherms, we demonstrate that a destabilization of catalytic intermediates occurs with increasing coverage. In CoOOH, a strong (~0.34 eV/ monolayer) destabilization of a strongly bound catalytic intermediate is observed, leading to a potential offset between the accumulation of the intermediate and measurable O 2 evolution. We contrast these data to CoFe-PB, where catalytic intermediate generation and O 2 evolution onset coincide due to weaker binding and destabilization (~0.19 eV/monolayer). By considering a correlation between activation energy and binding strength, we suggest that such adsorbate driven destabilization may account for a significant fraction of the observed OER catalytic activity in both materials. Finally, we disentangle the effects of adsorbate interactions on state coverages and kinetics to show how adsorbate interactions determine the observed Tafel slopes. Crucially, the case of CoFe-PB shows that, even where interactions are weaker, adsorption remains non-Nernstian, which strongly influences the observed Tafel slope.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A primer on selecting grain boundary sets for comparison of interfacial fracture properties in molecular dynamics simulations

In this study, all grain boundaries are not equal in their predisposition for fracture due to the complex coupling between lattice geometry, interfacial structure, and mechanical properties. The ability to understand these relationships is crucial to engineer materials resilient to grain boundary fracture. Here, a methodology is presented to isolate the role of grain boundary structure on interfacial fracture properties, such as the tensile strength and work of separation, using atomistic simulations. Instead of constructing sets of grain boundary models within the misorientation/structure space by simply varying the misorientation angle around a fixed misorientation axis, the proposed method creates sets of grain boundary models by means of isocurves associated with important fracture-related properties of the adjoining lattices. Such properties may include anisotropic elastic moduli, the Schmid factor for primary slip, and the propensity for simultaneous slip on multiple slip systems. This approach eliminates the effect of lattice properties from the comparative analysis of interfacial fracture properties and thus enables the identification of structure-property relationships for grain boundaries. As an example, this methodology is implemented to study crack propagation along Ni grain boundaries. Segregated H is used as a means to emphasize differences in the selected grain boundary structures while keeping lattice properties fixed.

36 MATERIALS SCIENCE↗

Dynamics of Global Gene Expression and Regulatory Elements in Growing Brachypodium Root System

Root systems are dynamic and adaptable organs that play critical roles in plant development. However, how roots grow and accumulate biomass during plant life cycle and in relation to shoot growth phenology remains understudied. A comprehensive time-dependent root morphological analysis integrated with molecular signatures is then required to advance our understanding of root growth and development. Here we studied Brachypodium distachyon rooting process by monitoring root morphology, biomass production, and C/N ratios during developmental stages. To provide insight into gene regulation that accompanies root growth, we generated comprehensive transcript profiles of Brachypodium whole-root system at four developmental stages. Our data analysis revealed that multiple biological processes including trehalose metabolism and various families of transcription factors (TFs) were differentially expressed in root system during plant development. In particular, the AUX/IAA, ERFs, WRKY, NAC, and MADS TF family members were upregulated as plant entered the booting/heading stage, while ARFs and GRFs were downregulated suggesting these TF families as important factors involved in specific phases of rooting, and possibly in regulation of transition to plant reproductive stages. We identified several Brachypodium candidate root biomass-promoting genes and cis -regulatory elements for further functional validations and root growth improvements in grasses.

59 BASIC BIOLOGICAL SCIENCES↗

Interdependence in active mobility adoption: Joint modeling and motivational spillover in walking, cycling and bike-sharing

Active mobility offers an array of physical, emotional, and social well-being benefits. However, with the proliferation of the sharing economy, new nonmotorized means of transport are entering the fold, complementing some existing mobility options while competing with others. The purpose of this research study is to investigate the adoption of three active travel modes—namely walking, cycling, and bikesharing—in a joint modeling framework. Here, the analysis is based on an adaptation of the stages of change framework, which originates from the health behavior sciences. Multivariate ordered probit modeling drawing on U.S. survey data provides well-needed insights into individuals’ preparedness to adopt multiple active modes as a function of personal, neighborhood, and psychosocial factors. The research suggests three important findings. (1) The joint model structure confirms interdependence among different active mobility choices. The strongest complementarity is found for walking and cycling adoption. (2) Each mode has a distinctive adoption path with either three or four separate stages. We discuss the implications of derived stage-thresholds and plot adoption contours for selected scenarios. (3) Psychological and neighborhood variables generate more coupling among active modes than individual and household factors. Specifically, identifying strongly with active mobility aspirations, experiences with multimodal travel, possessing better navigational skills, along with supportive local community norms are the factors that appear to drive the joint adoption decisions. This study contributes to the understanding of how decisions within the same functional domain are related and help to design policies that promote active mobility by identifying positive spillovers and joint determinants.

42 ENGINEERING↗

THREE-DIMENSIONAL GEOMETRIES AND THE ANALYSIS OF H II REGIONS

We compare emission line intensities from photoionization models of smooth and fractal shell geometries for low density H II regions, with particular focus on the low-ionization diagnostic diagram [N II]/H{alpha} versus H{alpha}. Building on previously published models and observations of Barnard's Loop, we show that the observed range of intensities and variations in the line intensity ratios may be reproduced with a three-dimensional shell geometry. Our models adopt solar abundances throughout the model nebula, in contrast with previous one-dimensional modeling which suggested the variations in line intensity ratios could only be reproduced if the heavy element abundances were increased by a factor of {approx}1.4. For spatially resolved H II regions, the multiple sightlines that pierce and sample different ionization and temperature conditions within smooth and fractal shells produce a range of line intensities that are easily overlooked if only the total integrated intensities from the entire nebula model are computed. Our conclusion is that inference of H II region properties, such as elemental abundances, via photoionization models of one-dimensional geometries must be treated with caution and further tested through three-dimensional modeling.

79 ASTRONOMY AND ASTROPHYSICS↗

K2P{sup 2}—A photometry pipeline for the K2 mission

With the loss of a second reaction wheel, resulting in the inability to point continuously and stably at the same field of view, the NASA Kepler satellite recently entered a new mode of observation known as the K2 mission. The data from this redesigned mission present a specific challenge; the targets systematically drift in position on an ∼6 hr timescale, inducing a significant instrumental signal in the photometric time series—this greatly impacts the ability to detect planetary signals and perform asteroseismic analysis. Here we detail our version of a reduction pipeline for K2 target pixel data, which automatically defines masks for all targets in a given frame; extracts the target’s flux and position time series; corrects the time series based on the apparent movement on the CCD (either in 1D or 2D), combined with the correction of instrumental and/or planetary signals via the Kepler Asteroseismic Science Operations Center (KASOC) filter, thus rendering the time series ready for asteroseismic analysis; computes power spectra for all targets; and identifies potential contaminations between targets. From a test of our pipeline on a sample of targets from the K2 campaign 0, the recovery of data for multiple targets increases the amount of potential light curves by a factor of ⩾10. Our pipeline could be applied to the upcoming TESS and PLATO 2.0 missions.

79 ASTRONOMY AND ASTROPHYSICS↗

THE MULTI-PHASE COLD FOUNTAIN IN M82 REVEALED BY A WIDE, SENSITIVE MAP OF THE MOLECULAR INTERSTELLAR MEDIUM

We present a wide area (≈8 × 8 kpc), sensitive map of CO (2–1) emission around the nearby starburst galaxy M82. Molecular gas extends far beyond the stellar disk, including emission associated with the well-known outflow as far as 3 kpc from M82's midplane. Kinematic signatures of the outflow are visible in both the CO and H i emission: both tracers show a minor axis velocity gradient and together they show double peaked profiles, consistent with a hot outflow bounded by a cone made of a mix of atomic and molecular gas. Combining our CO and H i data with observations of the dust continuum, we study the changing properties of the cold outflow as it leaves the disk. While H{sub 2} dominates the ISM near the disk, the dominant phase of the cool medium changes as it leaves the galaxy and becomes mostly atomic after about a kpc. Several arguments suggest that regardless of phase, the mass in the cold outflow does not make it far from the disk; the mass flux through surfaces above the disk appears to decline with a projected scale length of ≈1–2 kpc. The cool material must also end up distributed over a much wider angle than the hot outflow based on the nearly circular isophotes of dust and CO at low intensity and the declining rotation velocities as a function of height from the plane. The minor axis of M82 appears so striking at many wavelengths because the interface between the hot wind cavity and the cool gas produces Hα, hot dust, polycyclic aromatic hydrocarbon emission, and scattered UV light. We also show the level at which a face-on version of M82 would be detectable as an outflow based on unresolved spectroscopy. Finally, we consider multiple constraints on the CO-to-H{sub 2} conversion factor, which must change across the galaxy but appears to be only a factor of ≈2 lower than the Galactic value in the outflow.

79 ASTRONOMY AND ASTROPHYSICS↗