Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Critical behavior of the van der Waals bonded ferromagnet Fe 3 - x GeTe 2

The critical properties of the single-crystalline van der Waals bonded ferromagnet Fe 3-x GeTe 2 were investigated by bulk dc magnetization around the paramagnetic to ferromagnetic (FM) phase transition. The Fe 3-x GeTe 2 single crystals grown by self-flux method with Fe deficiency x ≈ 0.36 exhibit bulk FM ordering below T c = 152 K. The Mössbauer spectroscopy was used to provide information on defects and local atomic environment in such crystals. Critical exponents β = 0.372(4) with a critical temperature T c = 151.25(5) K and γ = 1.265(15) with T c = 151.17(12) K are obtained by the Kouvel-Fisher method, whereas δ = 4.50 ( 1 ) is obtained by a critical isotherm analysis at T c = 151 K. These critical exponents obey the Widom scaling relation δ = 1 + γ / β , indicating self-consistency of the obtained values. With these critical exponents the isotherm M(H) curves below and above the critical temperatures collapse into two independent universal branches, obeying the single scaling equation m = f±(h), where m and h are renormalized magnetization and field, respectively. The exponents determined in this study are close to those calculated from the results of the renormalization group approach for a heuristic model of three-dimensional Heisenberg (d = 3,n = 3) spins coupled with the attractive long-range interactions between spins that decay as J(r) ≈ r -(3+σ) with σ = 1.89.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determining the vibrational entropy change in the giant magnetocaloric material LaFe 11.6 Si 1.4 by nuclear resonant inelastic x-ray scattering

Magnetocaloric ${\mathrm{LaFe}}_{13{-}x}{\mathrm{Si}}_{x}$-based compounds belong to the outstanding materials with potential for efficient solid-state refrigeration. We have performed temperature-dependent $^{57}\mathrm{Fe}$ nuclear resonant inelastic x-ray scattering measurements (in a field ${{\mu}}_{0}H$ of ${\sim}0.7$ T) of the vibrational (phonon) density of states, VDOS, in ${\mathrm{LaFe}}_{11.6}{\mathrm{Si}}_{1.4}$ across the metamagnetic isostructural first-order phase transition at ${T}_{C}{\sim}192$ K from the low-temperature ferromagnetic (FM) to the high-temperature paramagnetic (PM) phase, in order to determine the change in thermodynamic properties of the Fe lattice at ${T}_{C}$. The experimental results are compared with density-functional-theory-based first-principles calculations using the fixed-spin moment approach. Our combined experimental and theoretical results reveal distinct and abrupt changes in the VDOS of the Fe sublattice across ${T}_{C}$, occurring within a small temperature interval of $\mathrm{{\Delta}}T{\le}12$ K around ${T}_{C}$. This indicates that strong magnetoelastic coupling (at the atomic scale) is present up to ${T}_{C}$, leading to a pronounced lattice softening (phonon redshift) in the PM phase. These changes originate from the itinerant electron magnetism associated with Fe and are correlated with distinct modifications in the Fe-partial electronic density of states $D({E}_{F}$) at the Fermi energy ${E}_{F}$. From the experimental VDOS we can infer an abrupt increase (jump) in the Fe-partial vibrational entropy $\mathrm{{\Delta}}{S}_{\mathrm{vib}}$ of $+6.9\pm{}2.6$ J/(kg K) and in the vibrational specific heat $\mathrm{{\Delta}}{C}_{\mathrm{vib}}$ of $+2.7\pm{}1.6$ J/(kg K) upon heating. The increase in magnitude of the vibrational entropy $|\mathrm{{\Delta}}{S}_{\mathrm{vib}}|=6.9$ J/(kg K) of the Fe sublattice at ${T}_{C}$ upon heating is substantial, if compared with the magnitude of the isothermal entropy change $|\mathrm{{\Delta}}{S}_{\mathrm{iso}}|$ of 14.2 J/(kg K) in a field change $\mathrm{{\Delta}}B$ from 0 to 1 T, as obtained from isothermal magnetization measurements on our sample and using the Maxwell relation. Finally, we demonstrate that $\mathrm{{\Delta}}{S}_{\mathrm{vib}}$ obtained by nuclear resonant inelastic x-ray scattering is a sizable quantity and contributes directly and cooperatively to the total entropy change $\mathrm{{\Delta}}{S}_{\mathrm{iso}}$ at the phase transition of ${\mathrm{LaFe}}_{13{-}x}{\mathrm{Si}}_{x}$.

36 MATERIALS SCIENCE↗

DAMA and the self-similar infall halo model

The annual modulation in the rate of weakly interacting massive particle (WIMP) recoils observed by the DAMA Collaboration at high significance is often analyzed in the context of an isothermal Maxwell-Boltzmann velocity distribution. While this is the simplest model, there is a need to consider other well motivated theories of halo formation. In this paper, we study a different halo model, that of self-similar infall which is characterized by the presence of a number of cold streams and caustics, not seen in simulations. It is shown that the self-similar infall model is consistent with the DAMA result both in amplitude and in phase, for WIMP masses exceeding {approx_equal}250 GeV at the 99.7% confidence level. Adding a small thermal component makes the parameter space near m{sub {chi}=}12 GeV consistent with the self-similar model. The minimum {chi}{sup 2} per degree of freedom is found to be 0.92(1.03) with(without) channeling taken into account, indicating an acceptable fit. For WIMP masses much greater than the mass of the target nucleus, the recoil rate depends only on the ratio {sigma}{sub p}/m{sub {chi}} which is found to be {approx_equal}0.06 femtobarn/TeV. However, as in the case of the isothermal halo, the allowed parameter space is inconsistent with the null result obtained by the CDMS and XENON experiments for spin-independent elastic scattering. Future experiments with directional sensitivity and mass bounds from accelerator experiments will help to distinguish between different halo models and/or constrain the contribution from cold flows.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural uncertainty assessment for fire-engulfed objects in crosswind: Establishing credibility for a multiphysics wall-modeled large-eddy simulation paradigm

A structural uncertainty validation study for a large-scale, fire-engulfed, elevated object subjected to crosswind is presented to establish the credibility of a high-fidelity, low-Mach, turbulent reacting flow wall-modeled large-eddy simulation (WMLES) approach that includes multiphysics coupling to participating media radiation and conjugate heat transfer. To establish that WMLES can accurately predict surface quantities including drag and pressure coefficient in the low-Mach crosswind regime, a foundational elevated isothermal cylinder validation case is presented at a similar gap-to-diameter ratio of 0.25, spanning the subcritical to supercritical drag regime (Re 𝐷 = 1.1 × 10 5 and 4.3 × 10 5 , respectively). Here, this study exercised both static and dynamic coefficient LES (Smagorinsky and 𝑘 sgs ) with both local and exchange-based velocity sampling. Results showcase that the drag crisis (or the sudden drop in drag coefficient at increased Re 𝐷 ) is well captured when using an exchange-based dynamic coefficient WMLES methodology, while noting lack of mesh convergence and overall drag and pressure coefficient predictively when using a static coefficient, local velocity sampling WMLES. For the 𝒪⁡(10) m JP-8 liquid pool fire crosswind validation study presented, two experimental crosswind configurations (2 m/s and 9.5 m/s) are showcased for a fire-engulfed mock fuselage roughly 4 m in diameter. Using the best model-form practices identified in the isothermal study, dynamic coefficient 𝑘 sgs exchange-based WMLES fire validation findings demonstrate accurate peak irradiation and skin temperature predictions as a function of crosswind magnitude. Excessive yaw in the low-crosswind fuselage configuration, consistent with experimental findings, captured a significant predicted asymmetry in flame attachment and heat flux toward the downwind cylindrical cap—indicative of axial vortex structures transporting the flame along the upper and lower fuselage leeward surface. All fire mesh resolution simulations captured the experimental finding that as crosswind increased, predicted flame shape and peak irradiation magnitude onto the fuselage transitioned from a windward to a leeward cylinder location due to the migration of the upper- to lower-shear fuel/air mixing layer thereby demonstrating the novelty, significance, and credibility of this high-fidelity WMLES reacting flow framework.

Domino, Stefan Paul [Sandia National Laboratories ↗

Interstitial solute segregation at triple junctions: Implications for nanomaterials and a case study of hydrogen in palladium

At very fine grain sizes, grain boundary segregation can deviate from conventional behavior due to triple junction effects. While this issue has been addressed in prior work for substitutional alloys, here we develop a framework that accounts for interstitial sites in the grains, grain boundaries, and triple junctions of model Pd(H) polycrystals. This approach allows computation of interstitial segregation spectra separately at both defect types, which permits an understanding of segregation at all grain sizes via a size-scaling spectral isotherm. Here, the size dependencies of dilute Pd(H) are found to be influenced not only by the triple junction content, but also by grain size–dependent lattice strains; the latter effect is evidenced by size dependencies of individual grain boundary and junction subspectra. The framework proposed here is applicable to interstitial alloys in general and may serve as a basis for interfacial engineering in interstitial nanocrystalline alloys. As an example, we show that using the dilute limit isotherm, hydrogen density can triple in nanocrystalline vis-à-vis microcrystalline Pd due to hydrogen adsorption at intergranular defect sites.

Alloys↗

Density Fluctuations of Hard-Sphere Fluids in Narrow Confinement

Spatial confinement induces microscopic ordering of fluids, which in turn alters many of their dynamic and thermodynamic properties. However, the isothermal compressibility has hitherto been largely overlooked in the literature, despite its obvious connection to the underlying microscopic structure and density fluctuations in confined geometries. Here, we address this issue by probing density profiles and structure factors of hard-sphere fluids in various narrow slits, using x-ray scattering from colloid-filled nanofluidic containers and integral-equation-based statistical mechanics at the level of pair distributions for inhomogeneous fluids. Most importantly, we demonstrate that density fluctuations and isothermal compressibilities in confined fluids can be obtained experimentally from the long-wavelength limit of the structure factor, providing a formally exact and experimentally accessible connection between microscopic structure and macroscopic, thermodynamic properties. Our approach will thus, for example, allow direct experimental verification of theoretically predicted enhanced density fluctuations in liquids near solvophobic interfaces.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Beyond the detergent effect: a binding site for sodium dodecyl sulfate (SDS) in mammalian apoferritin

Using X-ray crystallography and isothermal titration calorimetry, we show that sodium dodecyl sulfate (SDS) binds specifically to a pre-formed internal cavity in horse-spleen apoferritin. Although sodium dodecyl sulfate (SDS) is widely used as an anionic detergent, it can also exert specific pharmacological effects that are independent of the surfactant properties of the molecule. However, structural details of how proteins recognize SDS are scarce. Here, it is demonstrated that SDS binds specifically to a naturally occurring four-helix bundle protein: horse apoferritin. The X-ray crystal structure of the apoferritin–SDS complex was determined at a resolution of 1.9 Å and revealed that the SDS binds in an internal cavity that has previously been shown to recognize various general anesthetics. A dissociation constant of 24 ± 9 µM at 293 K was determined by isothermal titration calorimetry. SDS binds in this cavity by bending its alkyl tail into a horseshoe shape; the charged SDS head group lies in the opening of the cavity at the protein surface. This crystal structure provides insights into the protein–SDS interactions that give rise to binding and may prove useful in the design of novel SDS-like ligands for some proteins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the structural origin of crystalline phase transformations in nepheline (NaAlSiO 4 )‐based glass‐ceramics

Abstract Nepheline (Na 6 K 2 Al 8 Si 8 O 32 ) is a rock‐forming tectosilicate mineral which is by far the most abundant of the feldspathoids. The crystallization in nepheline‐based glass‐ceramics proceeds through several polymorphic transformations — mainly orthorhombic, hexagonal, cubic — depending on their thermochemistry. However, the fundamental science governing these transformations is poorly understood. In this article, an attempt has been made to elucidate the structural drivers controlling these polymorphic transformations in nepheline‐based glass‐ceramics. Accordingly, two different sets of glasses (meta‐aluminous and per‐alkaline) have been designed in the system Na 2 O–CaO–Al 2 O 3 –SiO 2 in the crystallization field of nepheline and synthesized by the melt‐quench technique. The detailed structural analysis of glasses has been performed by 29 Si, 27 Al, and 23 Na magic‐angle spinning — nuclear magnetic resonance ( MAS NMR ), and multiple‐quantum MAS NMR spectroscopy, while the crystalline phase transformations in these glasses have been studied under isothermal and non‐isothermal conditions using differential scanning calorimetry ( DSC ), X‐ray diffraction ( XRD ), and MQMAS NMR . Results indicate that the sequence of polymorphic phase transformations in these glass‐ceramics is dictated by the compositional chemistry of the parent glasses and the local environments of different species in the glass structure; for example, the sodium environment in glasses became highly ordered with decreasing Na 2 O/CaO ratio, thus favoring the formation of hexagonal nepheline, while the cubic polymorph was the stable phase in SiO 2 –poor glass‐ceramics with (Na 2 O+CaO)/Al 2 O 3 > 1. The structural origins of these crystalline phase transformations have been discussed in the paper.

Deshkar, Ambar↗

Thermodynamic assessment of the hollandite high‐level radioactive waste form

Abstract Hollandite has been studied as a candidate ceramic waste form for the disposal of high‐level radioactive waste due to its inherent leach resistance and ability to immobilize alkaline‐earth metals such as Cs and Ba at defined lattice sites in the crystallographic structure. The chemical and structural complexity of hollandite‐type phases developed for high‐level waste immobilization limits the systematic experimental research that is required to understand phase development due to the large number of potential additives and compositional ranges that must be evaluated. Modeling the equilibrium behavior of the complex hollandite‐forming oxide waste system would aid in the design and processing of hollandite waste forms by predicting their thermodynamic stability. Thus, a BaO–Cs 2 O–TiO 2 –Cr 2 O 3 –Al 2 O 3 –Fe 2 O 3 –FeO–Ga 2 O 3 thermodynamic database was developed in this work according to the CALPHAD methodology. The compound energy formalism was used to model solid solution phases such as hollandite while the two‐sublattice partially ionic liquid model characterized the oxide melt. Results of model optimizations are presented and discussed including a 1473 K isothermal BaO–Cs 2 O–TiO 2 pseudo‐ternary diagram that extrapolates phase equilibrium behavior to regions not experimentally explored.

Utlak, Stephen A.↗

Effects of temperature inversion on densification in chemical vapor infiltration

In a classical chemical vapor infiltration (CVI) process, the competing effects of chemical kinetics and reagent gas transport lead to non–uniform depositions such that outer layers of a preform densify faster leaving the core highly porous. Currently, CVI must be performed at a sufficiently low temperature to achieve good densification quality which leads to high processing time and cost. Volumetric heating of the preform, especially through microwaves, can create temperature inversion such that the core is hotter than the outer surface and potentially, overcome the challenges associated with isothermal CVI. Direct numerical simulations (DNS) of densification under various such temperature distributions indicate that microwave heating in CVI processing can lead to better (uniform) densification of porous preforms. Here the role of key parameters describing the temperature distributions on the densification behavior is investigated. Strategic temporal control of the temperature distribution shows that processing times can be reduced by almost half while maintaining a good densification quality similar to that of low–temperature isothermal processing. Inside–out densification due to the inverted temperature profile is a key distinguishing characteristic of microwave assisted CVI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a graphite probe calorimeter for absolute clinical dosimetry

The aim of this work is to present the numerical design optimization, construction, and experimental proof of concept of a graphite probe calorimeter (GPC) conceived for dose measurement in the clinical environment (U.S. provisional patent 61/652,540). A finite element method (FEM) based numerical heat transfer study was conducted using a commercial software package to explore the feasibility of the GPC and to optimize the shape, dimensions, and materials used in its design. A functioning prototype was constructed inhouse and used to perform dose to water measurements under a 6 MV photon beam at 400 and 1000 MU/min, in a thermally insulated water phantom. Heat loss correction factors were determined using FEM analysis while the radiation field perturbation and the graphite to water absorbed dose conversion factors were calculated using Monte Carlo simulations. The difference in the average measured dose to water for the 400 and 1000 MU/min runs using the TG-51 protocol and the GPC was 0.2% and 1.2%, respectively. Heat loss correction factors ranged from 1.001 to 1.002, while the product of the perturbation and dose conversion factors was calculated to be 1.130. The combined relative uncertainty was estimated to be 1.4%, with the largest contributors being the specific heat capacity of the graphite (type B, 0.8%) and the reproducibility, defined as the standard deviation of the mean measured dose (type A, 0.6%). By establishing the feasibility of using the GPC as a practical clinical absolute photon dosimeter, this work lays the foundation for further device enhancements, including the development of an isothermal mode of operation and an overall miniaturization, making it potentially suitable for use in small and composite radiation fields. It is anticipated that, through the incorporation of isothermal stabilization provided by temperature controllers, a subpercent overall uncertainty will be achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nonlinear theory of ionic sound waves in a hot quantum-degenerate electron-positron-ion plasma

A collisionless nonmagnetized e-p-i plasma consisting of quantum-degenerate gases of ions, electrons, and positrons at nonzero temperatures is considered. The dispersion equation for isothermal ionic sound waves is derived and analyzed, and an exact expression is obtained for the linear velocity of ionic sound. Analysis of the dispersion equation has made it possible to determine the ranges of parameters in which nonlinear solutions in the form of solitons should be sought. A nonlinear theory of isothermal ionic sound waves is developed and used for obtaining and analyzing the exact solution to the system of initial equations. Analysis has been carried out by the method of the Bernoulli pseudopotential. The ranges of phase velocities of periodic ionic sound waves and soliton velocities are determined. It is shown that in the plasma under investigation, these ranges do not overlap and that the soliton velocity cannot be lower than the linear velocity of ionic sound. The profiles of physical quantities in a periodic wave and in a soliton are constructed, as well as the dependences of the velocity of sound and the critical velocity on the ionic concentration in the plasma. It is shown that these velocities increase with the ion concentration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure and magnetoresistance of a Ni{sub 79.7}Fe{sub 14.0}Co{sub 2.8}Zr{sub 2.0}Cu{sub 1.5} thin film

The structure and magnetoresistance R of thin films based on Ni{sub 80}Fe{sub 20} permalloy doped with Co, Zr, and Cu have been examined by X-ray diffraction analysis and resistance measurement. The films have been obtained by ion plasma sputtering on oxidized silicon, fused quartz, and glass ceramic cold substrates. It has been shown that the structure of a film in the initial state is a mixture of solid solutions based on two phases: Ni(fcc) particles with a size of L Almost-Equal-To 8 nm and (Zr{sub 0.67}Ni{sub 0.22}O{sub 0.11}){gamma} particles with a size of L Almost-Equal-To 12 nm. The R(H) dependences on the strength and direction of the magnetic field H have been obtained at room temperature for film samples in the initial state and after isothermal annealing at 653 K for 1 h. According to R(H) dependences and X-ray diffraction analysis, films in the initial state are assumingly in a superparamagnetic state, whereas they exhibit ferromagnetic properties after isothermal annealing.

36 MATERIALS SCIENCE↗

Equations of State and the Phase Diagram of Dielectric and Metallic Helium-4

A new form of the semiempirical equation of state for the liquid phase of helium-4 is proposed that is based on the assumption that the structure of this phase consists of a mixture of dielectric and metallic components. It is postulated that solid dielectric helium with density higher than 5.3 g/cm{sup 3} becomes a metal. The values of the parameters of the equations of state for both solid phases and the liquid phase of helium are calculated. The unknown values of the initial data for helium are taken by analogy with the parameters for deuterium. The phase diagram, shock adiabat, isentropes, isotherms, and electrical conductivity in these processes are calculated with the use of the equations of state of solid and liquid phases of helium-4. The results of calculation are compared with experimental data in the range of pressures of up to 35 GPa for an isotherm, up to 150 GPa for a shock adiabat, up to 42 GPa for the melting curve, and up to 2000 GPa for isentropes, and showed quite satisfactory agreement. Numerical extrapolation of the melting curve is performed to a range of ultrahigh pressures of up to 8000 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anisotropy of the Thermal Expansion of a Polycrystalline Ni–Mn–Ga Alloy Subjected to Plastic Deformation by Forging

The formation of a sharp crystallographic texture in a Ni–Mn–Ga Heusler alloy by the multiple isothermal forging has been studied. An analysis of the thermal expansion near the martensitic transformation temperatures in the as-cast and forged states of the alloy shows that the thermomechanical treatment leads to an increase in the anisotropy of the sample geometric size changing during the phase transformation, which favors an increase in the functional characteristics of the alloy. The structural studies show that the alloy structure after multiple isothermal forging has the bimodal distribution of grain sizes. The formation of the bimodal structure by forging is assumed to make it possible to enhance the stability of the functional properties of the alloy during repeated cycles of the phase transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Transmission Electron Microscopy of High-Temperature Inconel-625 Corrosion by Molten Chloride Salts

This paper describes an approach to monitor high temperature molten chloride (MgCl 2 -NaCl-KCl) salt corrosion of Inconel-625 alloy in real time at high spatial resolution. The approach is based on a micro-environmental-cell assembly integrated into a transmission-electron-microscope goniometer to examine in situ the salt-alloy interface during corrosion, employing real time electron diffraction and imaging. It establishes procedures to minimize incorporation of H 2 O or O 2 from atmosphere in the chloride salts during sample fabrication and corrosion, which is critical to understanding the fundamental corrosion mechanisms. A clustering algorithm and a 2D Gaussian fit function are used to determine diffraction spot intensities in in situ diffraction patterns, to quantify alloy corrosion. This facilitates quantitative observation of the evolution of individual grains, in contrast to conventional macroscopic corrosion rate quantification. The isothermal corrosion rate of Inconel-625 in an anhydrous, unoxidized salt-stack is 220 ± 30 μm year -1 at 700 °C and 350 ± 20 μm year -1 at 800 °C. However, the corrosion rate at 700 °C increases five-fold to 1000 ± 170 μm year -1 when the salt stack is air-exposed, indicating the dominant effects of hydrated or oxidized impurities on corrosion acceleration. Furthermore, real time imaging of the microstructure evolution suggests that corrosion is initiated at grain boundaries.

14 SOLAR ENERGY↗

In Situ High-Temperature TEM Observation of Inconel Corrosion by Molten Chloride Salts with N 2 , O 2 , or H 2 O

Here, in situ transmission electron microscopy (TEM) diffraction and imaging techniques are used to monitor and quantify corrosion of Inconel-625 by pure molten chloride salts (MgCl 2 – NaCl – KCl) at 500 °C–800 °C in 1.0 atm inert N 2 or pure O2, or by salts which are controllably hydrated in a high vacuum chamber. The isothermal corrosion rate R in inert N 2 increases from 203 ± 30 μ m year –1 at 700 °C to 463 ± 30 μ m year –1 at 800 °C. An oxygen ambient causes a six-fold increase to R = 1261 ± 170 μ m year –1 at 700 °C. Salt hydration dramatically accelerates corrosion to R > 3 × 10 5 μ m year –1 at 700 °C while it leads to a more moderate R = 95 ± 20 and 486 ± 30 μ m year –1 at 500 °C and 600 °C, respectively. These isothermal corrosion rates indicate that the molten chloride corrosion is significantly accelerated by salt hydration at temperatures above 600 °C, where corrosion is aggravated by increased generation and solubility of corrosive HCl gases. Hence, to reduce rate of corrosion it is important to both avoid incorporation of H 2 O into the system at each stage and ensure proper flushing of the system before increasing the temperature beyond 600 °C. Compositional analysis of the corroded cells indicate that corrosion in O 2 ambient is dominated by oxidation of metals by O 2 gas dissolved in the chloride melt, but corrosion in H 2 O ambients is caused by chlorination of metals by dissolved HCl gas and MgOH + ions. So, to reduce rate of corrosion, steps should be taken to tailor chloride melt compositions that has low solubility for HCl and O 2 . All of our corroded samples exhibit passive-protective oxide layers of Cr, Mg, and Ni. In addition, distinct volatile compounds of Ni, Mo and Cr involving NiCl 2 , (Na,K) 2 MoO 4 and CrO 2 (OH) 2 are detected in N 2 , H 2 O, and O 2 ambients, respectively. We believe that corrosion acceleration can be minimized by minimizing formation of volatile by-products or promoting reactions that could convert these volatile compounds to solid phases, as these volatile compounds led to destruction of protective oxide layers.

14 SOLAR ENERGY↗