Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INSIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Insight into the Relationship Between Viscosity and Structure of CaO-SiO{sub 2}-MgO-Al{sub 2}O{sub 3} Molten Slags

This article elucidates the quantitative relationship between viscosity and structure in a basic slag system of CaO-SiO{sub 2}-MgO-Al{sub 2}O{sub 3} and focuses on the role of Al{sub 2}O{sub 3}. Slag viscosity was measured by the rotating cylinder method, and structural information was obtained using Fourier transformation infrared, Raman and magic angular spinning nuclear magnetic resonance (MAS-NMR) techniques. The results show that, as the Al{sub 2}O{sub 3} content increased, slag viscosity increased initially and decreased afterwards, directly indicating that Al{sub 2}O{sub 3} had an amphoteric effect on slag viscosity. The Raman spectra verified that with increasing Al{sub 2}O{sub 3} content, the concentrations of Q{sup 0}(Si) and Q{sup 2}(Si) decreased first and then increased, while that of Q{sup 1}(Si) kept increasing and that of Q{sup 3}(Si) increased first and then decreased. The {sup 27}Al MAS-NMR spectra proved that the mole ratios of AlO{sub 5} and AlO{sub 6} to AlO{sub 4} kept increasing with the increase of Al{sub 2}O{sub 3} content, and, overall, Al{sub 2}O{sub 3} changed from a network former to a network modifier. The relationship between the viscosity and structure of the molten slags was further analyzed quantitatively based on the modified (NBO/T), denoted as (NBO/T)′, and we found a fine linear correlation between the logarithm of viscosity and (NBO/T)′. Moreover, the variations of thermodynamic properties of this system also indirectly supported the present experimental results.

36 MATERIALS SCIENCE↗

Systematic Insight into Chloride Concentration, Applied Potential and Time Effect on the Passive Film of Cu-Zn-Ni Ternary Alloy in Alkaline Solution

The effects of chloride concentration, applied potential and time on the passive film of Cu-Zn-Ni ternary alloy in alkaline solution were systematically investigated using potentiodynamic and potentiostatic polarizations, electrochemical impedance spectroscopy, Mott–Schottky analysis, laser confocal microscopy, atomic force microscopy and x-ray photoelectron spectroscopy. Results showed that the pitting potential decreased as a linear function of log(a{sub Cl{sup −}}), and the size of pits extended faster in the horizontal direction than in the vertical direction. The passive oxide film formed on Cu-Zn-Ni alloy mainly exhibited p-type semiconductor behavior, which was consistent with cuprous and nickel oxide, the main components in the film. The density of cation vacancy (approximately 10{sup 20}-10{sup 21} cm{sup −3}) increased with potentiostatic time but reduced by the increasing potentials. The kinetics of passive film growth followed a parabolic law D = m * t{sup n}, where m is a constant considered as the initial growth rate and n is the time exponent. Subsequent to the formation of a compact and coherent passive film at higher potential, it was hard for an ion to migrate or for an aggressive ion to penetrate, which indicated better corrosion resistance for passive film formed under higher potential.

36 MATERIALS SCIENCE↗

Insights into the Transformation-Induced Plasticity (TRIP) Effect in Ti-Free Grade 300 Maraging Steel Manufactured by Laser Powder Bed Fusion (LPBF)

The near-net fabrication capabilities of laser powder-bed fusion (LPBF) offer the potential to manufacture tools with complex cooling channels that can improve the production efficiency of the tools with reduced greenhouse gas emissions. High strength, toughness, and wear resistance are some of the key properties required by the tooling industries to qualify tools. While strength can be increased through appropriate heat treatments, the increase in strength comes with an associated ductility loss. Here, we show that the non-equilibrium conditions inherent to LPBF can suppress the transformation-induced plasticity effect to room temperature in a Ti-free version of grade 300 maraging steel (G300MS), which is commonly not observed at room temperature in G300MS manufactured using conventional methods. The presence of retained austenite along with Ni-rich regions was found to increase the kinetics for austenite reversion during aging, thereby enabling the transformation of austenite into ε martensite during tensile deformation at room temperature, in turn increasing the strength with minimal ductility loss.

36 MATERIALS SCIENCE↗

Insights into Defect-Mediated Nucleation of the Equilibrium B2 Phase in Face-Centered Cubic High-Entropy Alloys

A fine scale second phase distribution is important for strengthening metallic materials. High precipitate density is often difficult to achieve due to sluggish precipitation kinetics and limited nucleation sites. Based on the CALPHAD predictions, transition element-based complex concentrated alloys (CCAs)/ High Entropy Alloys (HEAs), have a highly stable face-centered cubic (FCC) phase and intermetallic B2 phase. The precipitation of the strengthening B2 phase is often limited to low fractions in these alloys due to a high nucleation barrier in the FCC matrix. Here, by illustrating in three different alloys, we present a defect mediated nucleation of a high fraction equilibrium B2 phase. The degree of cold work is used to manipulate the phase fraction, morphology, and distribution of B2 precipitates. Our approach synergistically improves the strength and ductility of these alloys and is widely applicable to many other complex alloys.

Sharma, Abhishek↗

Data-Driven Insights into the Structural Essence of Plasticity in High-Entropy Alloys

The heterogeneous mechanical response of a crystalline alloy with multiple principal elements was investigated using molecular dynamics simulations. The local configuration of the alloy in its quiescent state was characterized by the variables derived from the gyration tensor and the atomic electronegativity. A multivariate analysis identified the geometric and chemical factors that influenced the atomic packing variations. Further, upon straining, the non-affine displacement exhibited spatial heterogeneity. A statistical correlation was established between the local yield events and the specific features of the local configuration. Our findings, validated by the performance metrics analysis, provided a structural criterion for the instability mechanisms in high-entropy alloys (HEAs) and enhanced the understanding of their plasticity.

36 MATERIALS SCIENCE↗

New Insights in the Control of Low-Density Lipoprotein Cholesterol to Prevent Cardiovascular Disease

Purpose of Review: Low-density lipoprotein cholesterol (LDL-C) is one major cause of cardiovascular disease (CVD). In this review, we discuss current developments in the understanding of LDL-C as lifelong risk factor, treatment targets, and emerging approaches to reduce cardiovascular risk by lowering LDL-C. Recent Findings: Recent evidence underscores the importance of LDL-C lowering in CVD prevention by mechanisms that increase the hepatic clearance of apolipoprotein B-containing lipoproteins from the plasma. Mendelian randomization studies provided evidence on both safety and efficacy of lower LDL-C in the long term. For young individuals, metrics other than 10-year CVD risk are required. Despite this evidence, LDL-C treatment target attainment is poor. Novel approaches are therefore needed. These include individualized strategies and new LDL-C-lowering pharmaceuticals. Summary: Early, long-term treatment with LDL-C-lowering therapies has the potential to markedly reduce CVD incidence and progression. Future research should aim to identify patient characteristics that enable physicians to tailor therapy to each individual patient.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

New insights into the growth mechanism and surface structure of palladium nanocrystals

Our paper presents a systematic study of the growth mechanism for Pd nanobars synthesized by reducing Na 2 PdCl 4 with L-ascorbic acid in an aqueous solution in the presence of bromide ions as a capping agent. Transmission electron microscopy (TEM) and high-resolution TEM analyses revealed that the growth at early stages of the synthesis was dominated by particle coalescence, followed by shape focusing via recrystallization and further growth via atomic addition. We investigated the detailed surface structure of the nanobars using aberration-corrected scanning TEM and found that the exposed {100} surfaces contained several types of defects such as an adatom island, a vacancy pit, and atomic steps. Upon thermal annealing, the nanobars evolved into a more thermodynamically favored shape with enhanced truncation at the corners.

36 MATERIALS SCIENCE↗

Structural insights into glutathione-mediated activation of the master regulator PrfA in Listeria monocytogenes

Listeria monocytogenes is a Gram-positive and facultative intracellular bacterial pathogen with two distinct lifestyles: saprophytic in the soil and parasitic in host cells. L. monocytogenes can cause a foodborne infection characterized by bacteremia, meningoencephalitis, abortion or neonatal sepsis and a high case-fatality rate. In relation to pathogenesis, the expression of most virulence genes in L. monocytogenes is regulated by the master regulator PrfA, which is a member of the Crp/Fnr family of site-specific DNA-binding transcription regulators. The absolute requirement of PrfA for pathogenesis was shown utilizing L. monocytogenes strains with deletions or loss-of-function mutations within the prfA gene. PrfA activates transcription by binding to a palindromic promoter element termed the PrfA box (tTAACanntGTtAa). Very recently, glutathione (GSH), either generated by bacteria or derived from host cells, was found to be the essential small molecule cofactor of PrfA through allosteric binding to the protein. PrfA G145S , the most well studied constitutively active mutant, was found to be able to completely bypass the requirement for glutathione during infection.

59 BASIC BIOLOGICAL SCIENCES↗

Fundamental Studies of New Ionization Technologies and Insights from IMS-MS

Exceptional ion mobility spectrometry mass spectrometry (IMS-MS) developments by von Helden, Jarrold, and Clemmer provided technology that gives a view of chemical/biological compositions previously not achievable. The ionization method of choice used with IMS-MS has been electrospray ionization (ESI). In this special issue contribution, we focus on fundamentals of heretofore unprecedented means for transferring volatile and nonvolatile compounds into gas-phase ions singly and multiply charged. These newer ionization processes frequently lead to different selectivity relative to ESI and, together with IMS-MS, may provide a more comprehensive view of chemical compositions directly from their original environment such as surfaces, e.g., tissue. Similarities of results using solvent- and matrix-assisted ionization are highlighted, as are differences between ESI and the inlet ionization methods, especially with mixtures such as bacterial extracts. Selectivity using different matrices is discussed, as are results which add to our fundamental knowledge of inlet ionization as well as pose additional avenues for inquiry. IMS-MS provides an opportunity for comparison studies relative to ESI and will prove valuable using the new ionization technologies for direct analyses. Our hypothesis is that some ESI-IMS-MS applications will be replaced by the new ionization processes and by understanding mechanistic aspects to aid enhanced source and method developments this will be hastened. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Ability to Simulate Absorption and Melt Pool Dynamics for Laser Melting of Bare Aluminum Plate: Results and Insights from the 2022 Asynchronous AM-Bench Challenge

The 2022 Asynchronous AM-Bench challenge was designed to test the ability of simulations to accurately predict laser power absorption as well as various melt pool behaviors (width, depth, and solidification) during laser melting of solid metal during stationary and scanned laser illumination. In this challenge, participants were asked to predict a series of experimental outcomes. Experimental data were obtained from a series of experiments performed at the Advanced Photon Source at Argonne National Laboratories in 2019. These experiments combined integrating sphere radiometry with high-speed X-ray imaging, allowing for the simultaneous recording of absolute laser power absorption and two-dimensional, projected images of the melt pool. All challenge problems were based on experiments using bare aluminum solid metal. Participants were provided with pertinent experimental information like laser power, scan speed, laser spot size, and material composition. Additionally, participants were given absorptance and X-ray imaging data from stationary and scanned laser experiments on solid Ti–6Al–4V that could be used for testing their models before attempting challenge problems. In total, this challenge received 56 submissions from eight different research groups for eight individual challenge problems. The data for this challenge, and associated information, are available for download from the NIST Public Data Repository. This paper summarizes the results from the 2022 Asynchronous AM-Bench challenge as well as discusses the lessons learned to help inform future challenges.

36 MATERIALS SCIENCE↗

Mechanistic Insights into the Catalytic Condensation of Methyl Ketones on MgO Surfaces

Ketone coupling via aldol condensation is one of the promising routes to produce cyclic and value-added precursors for renewable hydrocarbon biofuels. A first-principles-based microkinetic modeling is performed to evaluate the surface-mediated reaction mechanisms and the role of water molecules in the observed activities for 2-pentanone and 3-pentanone aldol condensation on dehydroxylated MgO(111) surface and hydroxylated terminated surface[OH-MgO(111)]. Here, we have identified the enhancement of the surface OH group to MgO(111) surface catalytic activity by destabilizing the binding strength of reaction intermediates and reducing the energy barriers of rate-determining steps(proton transfer and dehydration steps). The 2-pentanone has one elementary step less in the complete reaction mechanism of aldol condensation and preferable energy barrier for proton transfer and dehydration steps, revealing 2-pentanone as terminal ketone is more reactive than 3-pentanone as central ketone. The water molecules dominated the OH-MgO( 111) surface after further addition of water, leading to the reduction of turnover frequency of the aldol condensation dimer product as the loss of aldol condensation reaction intermediates in competitive adsorption with water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding low temperature oxidation activity of nanoarray-based monolithic catalysts: from performance observation to structural and chemical insights

Monolithic catalysts have been widely used in automotive, chemical, and energy relevant industries. Nano-array based monolithic catalysts have been developed, demonstrating high catalyst utilization efficiency and good thermal/mechanical robustness. Compared with the conventional wash-coat based monolithic catalysts, they have shown advances in precise and optimum microstructure control and feasibility in correlating materials structure with properties. Recently, the nano-array based monolithic catalysts have been studied for low temperature oxidation of automotive engine exhaust and exhibited interesting and promising catalytic activities. Here, this review focuses on discussing the key catalyst structural parameters that affect the catalytic performance from the following aspects, (1) geometric shape and crystal planes, (2) guest atom doping and defects, (3) array size and size-assisted active species loading, and (4) the synergy effect of metal oxide in composite nano-arrays. Prior to the discussion, an overview of the current status of synthesis and development of the nano-array based monolithic catalysts is introduced. The performance of these materials in low temperature simulated engine exhaust oxidation is also demonstrated. Finally, we hope this review will elucidate the science and chemistry behind the good oxidation performance of the nanoarray- based monolithic catalysts, and serve as a timely and useful research guide for rational design and further improvement of the nano-array based monolithic catalysts for automobile emission control.

36 MATERIALS SCIENCE↗