Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Cyclic voltammetric study of Co-Ni-Fe alloys electrodeposition in sulfate medium

Electrochemical technique has been used to study the electrodeposition of cobalt, nickel, iron and Co-Ni-Fe alloy on indium tin oxide (ITO) coated glass substrate. To obtain the nucleation mechanism, cyclic voltammetry is used to characterize the Co-Ni-Fe system. The scanning rate effect on the deposition process was investigated. Deposition of single metal occurs at potential values more positive than that estimated stability potential. Based on the cyclic voltammetry results, the electrodeposition of cobalt, nickel, iron and Co-Ni-Fe alloy clearly show that the process of diffusion occurs is controlled by the typical nucleation mechanism.

36 MATERIALS SCIENCE↗

Electronic and optical properties of Ga{sub 3−x}In{sub 5+x}Sn{sub 2}O{sub 16}: An experimental and theoretical study

Experimental measurements of optical and electronic properties and local-density approximation (LDA) calculations on polycrystalline Ga{sub 3−x}In{sub 5+x}Sn{sub 2}O{sub 16}—the so-called “T-phase” in the Ga{sub 2}O{sub 3}-In{sub 2}O{sub 3}-SnO{sub 2} ternary system—have revealed it to be a good candidate for n-type transparent conducting oxide applications, particularly in the replacement of tin-doped indium oxide as a transparent electrode in organic photovoltaics. Room temperature conductivity of over 1000 S cm{sup −1} was measured in polycrystalline bulk samples. Band structure calculations reveal a highly dispersed conduction band, corresponding to an electron effective mass of about 0.2 m{sub e}. Normalized carrier mobility and concentration trends indicate that conductivity changes in T-phase are attributable to changes in carrier concentration, with mobility remaining relatively constant through the range of processing conditions and sample composition. Screened exchange LDA calculations yield a fundamental band gap of about 2.60 eV. A relatively constant optical band gap in the range of 2.9–3.0 eV along the range of T-phase composition was measured by diffuse reflectance of bulk samples, whereas ab-initio simulations predict a decreasing fundamental band gap with increasing In-to-Ga ratio. This is attributed to an increasing Burstein-Moss shift—corresponding to increasing free electron concentration—with increasing In-to-Ga ratio.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatial coherence measurements of non-resonant and resonant high harmonics generated in laser ablation plumes

We present measurements of the spatial coherence of the high-order harmonics generated in laser-produced ablation plumes. Harmonics were generated using 4 fs, 775 nm pulses with peak intensity 3 × 10{sup 14} W cm{sup −2}. Double-slit fringe visibilities in the range of ≈0.6–0.75 were measured for non-resonant harmonics in carbon and resonantly enhanced harmonics in zinc and indium. These are somewhat higher than the visibility obtained for harmonics generated in argon gas under similar conditions. This is attributed to lower time-dependent ionization of the plasma ablation targets compared to argon during the high harmonics generation process.

36 MATERIALS SCIENCE↗

Electronic properties of InP (001)/HfO{sub 2} (001) interface: Band offsets and oxygen dependence

Using ab-initio methods, atomic structures and electronic properties of InP (001)/HfO{sub 2} (001) interface are studied within the framework of density functional theory. We examine the InP/HfO{sub 2} model interface electronic structures under varying oxidation conditions. The effects of indium and phosphorous concentrations on interfacial bonding, defect states, band offsets, and the thermodynamic stability at the interface are also investigated. The origin of interfacial gap states in InP (001)/HfO{sub 2} (001) interface are proposed, mainly from the P-rich oxides, which is validated by our experimental work. This highlights the importance of surface passivation prior to high-κ deposition based on the in situ spectroscopic results of atomic layer deposition of HfO{sub 2} on InP.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ Crystallization of RF sputtered ITO thin films: A comparison with annealed samples

Tin doped Indium Oxide (ITO) is a wide band gap semiconductor with high conductivity and transparency in the visible region of the solar spectrum. One of the most popular and exploited applications of ITO is the realization of the transparent conductive layers needed for the electrodes of light sensitive devices, such as photovoltaic cells. The thermal energy for the crystallization of ITO films is very low (150°C). The crystallization can be achieved by the continuous energetic bombardment of the ions in the sputtering chamber without annealing or substrate heating. The accumulated energy will ensure the thermal energy necessary for the crystallization. With the help of sufficiently high sputtering power and sufficient duration, crystallized ITO films can be produced without annealing. In this report, a comparison of the conductivity and transparency of ITO films under two crystallization conditions ((1) crystallization of the sputtered films by annealing; (2) in situ crystallization of the films by providing high sputtering power and long sputtering duration) will be presented.

36 MATERIALS SCIENCE↗

Thickness dependent low-frequency noise characteristics of a-InZnO thin-film transistors under light illumination

The influence of illumination on the electrical characteristics of amorphous indium–zinc oxide (a-IZO) thin-film transistors (TFTs) has been investigated. The electrical properties are found to depend significantly on the active thickness (T{sub IZO}) of the a-IZO TFT. The active thickness is seen to play a major role in the carrier transport mechanism. Based on the carrier fluctuation model, the low-frequency noise (LFN) characteristics of a-IZO devices of varying thicknesses were evaluated before as well as after illumination. Similar to the results of DC and capacitance–voltage (C–V) measurements, the LFN characteristics too show that the light-induced carrier transport becomes significantly enhanced for relatively thick (T{sub IZO} ≥ 60 nm) a-IZO devices.

36 MATERIALS SCIENCE↗

Effect of diamagnetic barium substitution on magnetic and photovoltaic properties in multiferroic BiFeO{sub 3}

Spontaneous magnetization and photovoltaic (PV) effects have been measured in (Bi{sub 1-x}Ba{sub x})FeO{sub 3-δ} ceramics for x = 0.05, 0.10, and 0.15. The substitution of Ba{sup 2+} ion in the A site of the perovskite unit cell can effectively enhance the ferromagnetic magnetization. The heterostructure of indium tin oxide (ITO) film/(Bi{sub 1-x}Ba{sub x})FeO{sub 3-δ} ceramic/Au film exhibits significant PV effects under illumination of λ = 405 nm. The PV responses decrease with increasing Ba concentration. The maximum power-conversion efficiency in the ITO/(Bi{sub 0.95}Ba{sub 0.5})FeO{sub 2.95}/Au can reach 0.006%. A theoretical model based on optically excited current in the depletion region between ITO film and (Bi{sub 1-x}Ba{sub x})FeO{sub 3-δ} ceramics is used to describe the I-V characteristic, open-circuit voltage (V{sub oc}), and short-circuit current density (J{sub sc}) as a function of light intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive switching memories in MoS{sub 2} nanosphere assemblies

A resistive switching memory device consisting of reduced graphene oxide and indium tin oxide as top/bottom two electrodes, separated by dielectric MoS{sub 2} nanosphere assemblies as the active interlayer, was fabricated. This device exhibits the rewritable nonvolatile resistive switching with low SET/RESET voltage (∼2 V), high ON/OFF resistance ratio (∼10{sup 4}), and superior electrical bistability, introducing a potential application in data storage field. The resistance switching mechanism was analyzed in the assumptive model of the electron tunneling across the polarized potential barriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-broadband terahertz time-domain ellipsometric spectroscopy utilizing GaP and GaSe emitters and an epitaxial layer transferred photoconductive detector

We present a reflection-type ultra-broadband terahertz (THz) time-domain spectroscopic ellipsometry system covering the frequency range of 0.5–30 THz. GaP (110) and z-cut GaSe crystals are used as emitters to generate the THz and mid-infrared pulses, respectively, and a photoconductive antenna switch using a low-temperature grown GaAs epitaxial layer transferred on Si substrate was used as a detector. By changing the emitter between the GaP and GaSe crystals, the measurable frequency range can be easily switched from the 0.5–7.8 THz range to the 7.8–30 THz range without additional optical alignment. We demonstrated the measurement of the dielectric function in a p-type InAs wafer and the optical conductivity of an indium tin oxide (ITO) thin film. The obtained carrier density and the mobility of the ITO thin film show good agreement with that obtained by the Hall measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A futuristic approach towards interface layer modifications for improved efficiency in inverted organic solar cells

Inverted polymer Solar Cells of the classical poly (3-hexylthiophene) (P3HT):(6,6)-phenyl-C{sub 61}butyric acid methyl ester (PC{sub 61}BM) blend on indium tin oxide substrates were fabricated, which shows improved device performance, by using a facile solution–processed ZnO-polyelectrolytes [poly (diallyldimethylammonium chloride) (PDADMAC), Poly (acrylic acid sodium salt) (PAS), poly (4-styrenesulfonic acid) (PSS), and Polyvinylpyrrolidone (PVP)] nanocomposite as a cathode interface layer compared to devices using pristine ZnO as cathode buffer layer in ambient conditions. The devices with different combinations of polyelectrolyte with ZnO show different improvements in the device efficiency. The combinations of ZnO with PVP and PDADMAC show highest amount of improvements in the efficiency by a factor of ∼17–19. The improvement of the efficiency may be due to various phenomena, such as the passivation of ZnO surface as well as bulk traps, work function modification, improved energy level alignment, improved electronic coupling of the inorganic/organic interface, improved light harvesting, and decrease of surface as well as bulk charge recombination in the device. The introduction of polyelectrolyte into ZnO inhibits the aggregation of ZnO nanoparticles yielding the large area ZnO nanoclusters; and hence, forming the uniform film of ZnO resulting in the modifications of morphology as well as electronic structure of ZnO-polyelectrolyte nano-composite favouring better electronic coupling between cathode and active layer and hence enhancing the current and, consequently, the efficiency. This simple low temperature ZnO-polyelectrolyte nanocomposite based protocol proposed for cathode interface layer modification may be very much useful for roll to roll industrial manufacturing of organic solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Core-shell ITO/ZnO/CdS/CdTe nanowire solar cells

Radial p-n junction nanowire (NW) solar cells with high densities of CdTe NWs coated with indium tin oxide (ITO)/ZnO/CdS triple shells were grown with excellent heterointerfaces. The optical reflectance of the devices was lower than for equivalent planar films by a factor of 100. The best efficiency for the NW solar cells was η = 2.49%, with current transport being dominated by recombination, and the conversion efficiencies being limited by a back contact barrier (ϕ{sub B} = 0.52 eV) and low shunt resistances (R{sub SH} < 500 Ω·cm{sup 2})

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flip-chip bonding of vertical-cavity surface-emitting lasers using laser-induced forward transfer

This letter reports the use of the Laser-Induced Forward Transfer (LIFT) technique for the fabrication of indium micro-bumps for the flip-chip (FC) bonding of single vertical-cavity surface-emitting laser chips. The FC bonded chips were electrically and optically characterized, and the successful functioning of the devices post-bonding is demonstrated. The die shear and life-time tests carried out on the bonded chips confirmed the mechanical reliability of the LIFT-assisted FC bonded assemblies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effects of buffer layers on the performance and stability of flexible InGaZnO thin film transistors on polyimide substrates

We demonstrated the fabrication of flexible amorphous indium gallium zinc oxide thin-film transistors (TFTs) on high-temperature polyimide (PI) substrates, which were debonded from the carrier glass after TFT fabrication. The application of appropriate buffer layers on the PI substrates affected the TFT performance and stability. The adoption of the SiN{sub x}/AlO{sub x} buffer layers as water and hydrogen diffusion barriers significantly improved the device performance and stability against the thermal annealing and negative bias stress, compared to single SiN{sub x} or SiO{sub x} buffer layers. The substrates could be bent down to a radius of curvature of 15 mm and the devices remained normally functional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A water-processable organic electron-selective layer for solution-processed inverted organic solar cells

A triazine- and pyridinium-containing water-soluble material of 1,1′,1″-(4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tris(benzene-4,1-diyl)) tris(methylene)tripyridinium bromide (TzPyBr) was developed as an organic electron-selective layer in solution-processed inverted organic solar cells due to its strong anti-erosion capacity against non-polar organic solvents commonly used for the active layer. Ohmic-like contact with the adjacent active materials like fullerene derivatives is speculated to be formed, as confirmed by the work-function measurements with scanning Kelvin probe and ultraviolet photoelectron spectroscopy techniques. Besides, considering the deep highest occupied molecular orbital energy level of TzPyBr, excellent hole-blocking property of the electron-selective layer is also anticipated. The inverted organic photovoltaic devices based on the TzPyBr/ITO (indium tin oxide) bilayer cathode exhibit dramatically enhanced performance compared to the control devices with bare ITO as the cathode and even higher efficiency than the conventional type devices with ITO and Al as the electrodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low dimensional GaAs/air vertical microcavity lasers

We report on the fabrication of gallium arsenide (GaAs)/air distributed Bragg reflector microresonators with indium gallium arsenide quantum wells. The structures are studied via momentum resolved photoluminescence spectroscopy which allows us to investigate a pronounced optical mode quantization of the photonic dispersion. We can extract a length parameter from these quantized states whose upper limit can be connected to the lateral physical extension of the microcavity via analytical calculations. Laser emission from our microcavity under optical pumping is observed in power dependent investigations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deep-level transient spectroscopy on an amorphous InGaZnO{sub 4} Schottky diode

The first direct measurement is reported of the bulk density of deep states in amorphous IGZO (indium-gallium-zinc oxide) semiconductor by means of deep-level transient spectroscopy (DLTS). The device under test is a Schottky diode of amorphous IGZO semiconductor on a palladium (Pd) Schottky-barrier electrode and with a molybdenum (Mo) Ohmic contact at the top. The DLTS technique allows to independently measure the energy and spatial distribution of subgap states in the IGZO thin film. The subgap trap concentration has a double exponential distribution as a function energy, with a value of ∼10{sup 19} cm{sup −3} eV{sup −1} at the conduction band edge and a value of ∼10{sup 17} cm{sup −3} eV{sup −1} at an energy of 0.55 eV below the conduction band. Such spectral distribution, however, is not uniform through the semiconductor film. The spatial distribution of subgap states correlates well with the background doping density distribution in the semiconductor, which increases towards the Ohmic Mo contact, suggesting that these two properties share the same physical origin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Organic photovoltaic cells with controlled polarization sensitivity

In this study, we demonstrate linearly polarized organic photovoltaic cells with a well-controlled level of polarization sensitivity. The polarized devices were created through the application of a large uniaxial strain to the bulk heterojunction poly(3-hexylthiophene):Phenyl-C61-butyric acid methyl ester (P3HT:PCBM) film and printing the plastically deformed active layer onto a PEDOT:PSS and indium tin oxide coated glass substrate. The P3HT:PCBM layer is processed such that it is able to accommodate high strains (over 100%) without fracture. After printing the strained films, thermal annealing is used to optimize solar cell performance while maintaining polarization sensitivity. A dichroic ratio and short circuit current ratio of ≈6.1 and ≈1.6 were achieved, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monochromatic light-assisted erasing effects of In-Ga-Zn-O thin film transistor memory with Al{sub 2}O{sub 3}/Zn-doped Al{sub 2}O{sub 3}/Al{sub 2}O{sub 3} stacks

We studied how electrical erasing of indium gallium zinc oxide-thin-film-transistor memory was improved by adding concurrent irradiation with monochromatic light (ML). At fixed gate bias, irradiating at wavelengths of ≤500 nm increased the erasing window (ΔV{sub th-e}) significantly: At a gate bias of −20 V and an erasing time of 5 min, ML irradiation at 400 nm increased ΔV{sub th-e} from 0.29 to 3.21 V. ΔV{sub th-e} increased incrementally with gate bias, erasing time, and ML power density, particularly at short ML wavelengths. Analyzing our experimental results, we discuss the underlying erasure mechanisms.

36 MATERIALS SCIENCE↗