Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPURITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Catalyst Composition and Impurity-dependent Kinetics of Nanowire Heteroepitaxy

The mechanisms and kinetics of axial Ge-Si nanowire heteroepitaxial growth based on the tailoring of the Au catalyst composition via Ga alloying are studied by environmental transmission electron microscopy combined with systematic ex-situ CVD calibrations. The morphology of the Ge-Si heterojunction, in particular the extent of a local, asymmetric increase in nanowire diameter, is found to depend on the Ga composition of the catalyst, on the TMGa precursor exposure temperature, and on the presence of dopants. To rationalize the findings, a general nucleation-based model for nanowire heteroepitaxy is established which is anticipated to be relevant to a wide range of material systems and device-enabling heterostructures.

Environmental Molecular Sciences Laboratory↗

Importance of multimodal characterization and influence of residual Li 2 S impurity in amorphous Li 3 PS 4 inorganic electrolytes

Amorphous Li 3 PS 4 (LPS) solid-state electrolytes are promising for energy-dense lithium metal batteries. LPS glass, synthesized from a 3:1 mol ratio of Li 2 S and P 2 S 5 , has high ionic conductivity and can be synthesized by ball milling or solution processing. Ball milling has been attractive because it provides the easiest route to access amorphous LPS with a conductivity of 3.5 × 10 –4 S cm –1 (20 °C). However, achieving the complete reaction of precursors via ball milling can be difficult, and most literature reports use X-ray diffraction (XRD) or Raman spectroscopy to confirm sample purity, both of which have limitations. Furthermore, the effect of residual precursors on ionic conductivity and lithium metal cycling is unknown. In this work, we illustrate the importance of multimodal characterization to determine LPS phase and chemical purity. To determine the residual Li 2 S content in LPS, we show that (1) XRD and 31 P solid state nuclear magnetic resonance (ssNMR) are insufficient and (2) Raman loses sensitivity at concentrations below 12 mol% Li 2 S. Most importantly, we show that 7 Li ssNMR is highly sensitive. Using 7 Li ssNMR, we investigate the effect of ball milling parameters and develop a robust and highly reproducible procedure for pure LPS synthesis. We find that as the residual Li 2 S precursor content increases, LPS conductivity decreases and lithium metal batteries exhibit higher overpotentials and poor cycle life. Furthermore, our work reveals the importance of multimodal characterization techniques for amorphous solid-state electrolyte characterization and will enable better synthetic strategies for highly conductive electrolytes for efficient energy-dense solid-state lithium metal batteries.

25 ENERGY STORAGE↗

Indirect optical absorption and origin of the emission from {beta}-FeSi{sub 2} nanoparticles: Bound exciton (0.809 eV) and band to acceptor impurity (0.795 eV) transitions

We investigated the optical absorption of the fundamental band edge and the origin of the emission from {beta}-FeSi{sub 2} nanoparticles synthesized by ion-beam-induced epitaxial crystallization of Fe{sup +} implanted SiO{sub 2}/Si(100) followed by thermal annealing. From micro-Raman scattering and transmission electron microscopy measurements it was possible to attest the formation of strained {beta}-FeSi{sub 2} nanoparticles and its structural quality. The optical absorption near the fundamental gap edge of {beta}-FeSi{sub 2} nanoparticles evaluated by spectroscopic ellipsometry showed a step structure characteristic of an indirect fundamental gap material. Photoluminescence spectroscopy measurements at each synthesis stage revealed complex emissions in the 0.7-0.9 eV spectral region, with different intensities and morphologies strongly dependent on thermal treatment temperature. Spectral deconvolution into four transition lines at 0.795, 0.809, 0.851, and 0.873 eV was performed. We concluded that the emission at 0.795 eV may be related to a radiative direct transition from the direct conduction band to an acceptor level and that the emission at 0.809 eV derives from a recombination of an indirect bound exciton to this acceptor level of {beta}-FeSi{sub 2}. Emissions 0.851 and 0.873 eV were confirmed to be typical dislocation-related photoluminescence centers in Si. From the energy balance we determined the fundamental indirect and direct band gap energies to be 0.856 and 0.867 eV, respectively. An illustrative energy band diagram derived from a proposed model to explain the possible transition processes involved is presented.

36 MATERIALS SCIENCE↗

Coulomb Interaction between InAs/GaAs Quantum Dots and Adjacent Impurities

Defects positioned close to a plane of quantum dots (QDs) are shown to be influenced by coulomb interaction effect when the quantum dots are charged by electrons. Signals from deep level transient spectroscopy (DLTS) measurement give rise to a mirror effect in the spectrum depending on movement of the defect energy level in relation to the Fermi-level as a result of the electron traffic at the QDs.

36 MATERIALS SCIENCE↗

Ferromagnetic resonance studies of Fe thin films with dilute heavy rare-earth impurities

The structure and magnetic properties of Fe{sub 1-x}Gd(Tb){sub x} films prepared by sputtering have been investigated using x-ray diffraction, vibrating sample magnetometer, and ferromagnetic resonance. Magnetic measurements show that the saturation magnetization decreases as the increase of Gd(Tb) content, which agrees with that Gd(Tb) atomic moments align antiparallel with Fe moments. Theoretical fittings of the angular dependence of ferromagnetic resonance field yield the second- and forth-order perpendicular anisotropy constants K{sub perpendicular1} and K{sub perpendicular2}, which show a spin reorientation with increasing Gd(Tb) doping. The intrinsic contribution of ferromagnetic resonance linewidth as a result of Gilbert damping is separated from the extrinsic contribution because of the inhomogeneity of the films. It is found that the additions of Gd additives do not significantly improve the damping constant, whereas the Tb dopants increase the damping constant from 0.04 without Tb to 0.11 with 19% Tb, thus a remarkable enhancement of 175%.

36 MATERIALS SCIENCE↗

Luminescence properties of Sm{sup 3+} impurities in strontium lithium bismuth borate glasses

In the present work, different concentrations of Sm{sup 3+}-doped strontium lithium bismuth borate glasses (SLBiB) were prepared by melt quench technique. The amorphous nature of the prepared glass samples was confirmed by X-ray diffraction and SEM analysis. Using the J-O intensity parameters, emission and decay measurements various radiative properties are studied. The nature of decay curves of {sup 4}G{sub 5/2} level for different Sm{sup 3+} ion concentrations in SLBiB glasses has been analyzed. The intensities of observed emission peaks and measured lifetimes decrease with the increase of Sm{sup 3+} ion concentration which may be due to energy transfer between excited Sm{sup 3+} ions through cross-relaxations and resonant energy channels.

36 MATERIALS SCIENCE↗

A first-principles core-level XPS study on the boron impurities in germanium crystal

We systematically investigated the x-ray photoelectron spectroscopy (XPS) core-level shifts and formation energies of boron defects in germanium crystals and compared the results to those in silicon crystals. Both for XPS core-level shifts and formation energies, relationship between defects in Si and Ge is roughly linear. From the similarity in the formation energy, it is expected that the exotic clusters like icosahedral B12 exist in Ge as well as in Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice location and local magnetism of recoil implanted Fe impurities in wide and narrow band semiconductors CdTe, CdSe, and InSb: Experiment and theory

Employing the time differential perturbed angular distribution method, we have measured local susceptibility and spin relaxation rate of {sup 54}Fe nuclei implanted in III-V and II-VI semiconductors, CdTe, CdSe, and InSb. The magnetic response of Fe, identified to occupy the metal as well as the semi-metal atom sites, exhibit Curie-Weiss type susceptibility and Korringa like spin relaxation rate, revealing the existence of localized moments with small spin fluctuation temperature. The experimental results are supported by first principle electronic structure calculations performed within the frame work of density functional theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗