Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gas Separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Ion mobility spectrometry of hydrazine, monomethylhydrazine, and ammonia in air with 5-nonanone reagent gas

Hydrazine (HZ) and monomethylhydrazine (MMH) in air were monitored continuously using a hand-held ion mobility spectrometer equipped with membrane inlet, 63Ni ion source, acetone reagent gas, and ambient temperature drift tube. Response characteristics included detection limit, 6 ppb; linear range, 10-600 ppb; saturated response, >2 ppm; and stable response after 15-30 min. Ammonia interfered in hydrazines detection through a product ion with the same drift time as that for MMH and HZ. Acetone reagent gas was replaced with 5-nonanone to alter drift times of product ions and separate ammonia from MMH and HZ. Patterns in mobility spectra, ion identifications from mass spectra, and fragmentation cross-sections from collisional-induced dissociations suggest that drift times are governed by ion-cluster equilibria in the drift region of the mobility spectrometer. Practical aspects including calibration, stability, and reproducibility are reported from the use of a hand-held mobility spectrometer on the space shuttle Atlantis during mission STS-37.

Flight Experiment↗
NASA NTRS2005

RSRM TP-H1148 Main Grain Propellant Crack Initiation Evaluation

Pressurized TP-HI 148 propellant fracture toughness testing was performed to assess the potential for initiation of visually undetectable cracks in the RSRM forward segment transition region during motor ignition. Two separate test specimens were used in this evaluation. Testing was performed in cold-gas and hot-fire environments, and under both static and dynamic pressurization conditions. Analysis of test results demonstrates safety factors against initiation of visually undetectable cracks in excess of 8.0. The Reusable Solid Rocket Motor (RSRM) forward segment is cast with PBAN propellant (TP-HI 148) to form T an 1 1-point star configuration that transitions to a tapered center perforated bore (see Figure 1). The geometry of the transition region between the fin valleys and the bore causes a localized area of high strain during horizontal storage. Updated analyses using worst-case mechanical properties at 40 F and improved modeling techniques indicated a slight reduction in safety margins over previous predictions. Although there is no history of strain induced cracks or flaws in the transition region propellant, a proactive test effort was initiated to better understand the implications of the new analysis, primarily the resistance of TP-H1148 propellant to crack initiation' during RSRM ignition.

Earnest, Todd E.↗
NASA NTRS2012

Pneumatic System for Concentration of Micrometer-Size Lunar Soil

A report describes a size-sorting method to separate and concentrate micrometer- size dust from a broad size range of particles without using sieves, fluids, or other processes that may modify the composition or the surface properties of the dust. The system consists of four processing units connected in series by tubing. Samples of dry particulates such as lunar soil are introduced into the first unit, a fluidized bed. The flow of introduced nitrogen fluidizes the particulates and preferentially moves the finer grain sizes on to the next unit, a flat plate impactor, followed by a cyclone separator, followed by a Nuclepore polycarbonate filter to collect the dust. By varying the gas flow rate and the sizes of various orifices in the system, the size of the final and intermediate particles can be varied to provide the desired products. The dust can be collected from the filter. In addition, electron microscope grids can be placed on the Nuclepore filter for direct sampling followed by electron microscope characterization of the dust without further handling.

McKay, David↗
NASA NTRS2013

Characterization of the Gaseous Companion k Andromedae B* New Keck and LBTI High-contrast Observations

Context. We previously reported the direct detection of a low mass companion at a projected separation of 55+/-2 astronomical units around the B9 type star kappa Andromedae. The properties of the system (mass ratio, separation) make it a benchmark for the understanding of the formation and evolution of gas giant planets and brown dwarfs on wide-orbits. Aims. We present new angular differential imaging (ADI) images of the system at 2.146 (K(sub s)), 3.776 (L'), 4.052 (NB 4.05) and 4.78 micrometers (M') obtained with Keck/NIRC2 and LBTI/LMIRCam, as well as more accurate near-infrared photometry of the star with the MIMIR instrument. We aim to determine the near-infrared spectral energy distribution (SED) of the companion and use it to characterize the object. Methods. We used analysis methods adapted to ADI to extract the companion flux. We compared the photometry of the object to reference young/old objects and to a set of seven PHOENIX-based atmospheric models of cool objects accounting for the formation of dust. We used evolutionary models to derive mass estimates considering a wide range of plausible initial conditions. Finally, we used dedicated formation models to discuss the possible origin of the companion. Results. We derive a more accurate J = 15.86 +/- 0.21, H = 14.95 +/- 0.13, K(sub s) = 14.32 +/- 0.09 mag for kappa And b. We redetect the companion in all our high contrast observations. We confirm previous contrasts obtained at K(sub s) and L' band. We derive NB 4.05 = 13.0 +/- 0.2 and M' = 13.3 +/- 0.3 mag and estimate Log(base 10)(L/solar luminosity) = −3.76 +/- 0.06. Atmospheric models yield T(sub eff) = 1900(+100/−200) K. They do not set constrains on the surface gravity. "Hot-start" evolutionary models predict masses of 14(+25/−2) Jupiter mass based on the luminosity and temperature estimates, and considering a conservative age range for the system (30(+120/−10) million years). "warm-start" evolutionary tracks constrain the mass to M greater than or equal to 11 Jupiter mass. Conclusions. The mass of kappa Andromedae b mostly falls in the brown-dwarf regime, due to remaining uncertainties in age and mass-luminosity models. According to the formation models, disk instability in a primordial disk could account for the position and a wide range of plausible masses of kappa and b.

spectral energy distribution (SED)↗
NASA NTRS2020

AJAX CABOTS Data

The Alpha Jet Atmospheric eXperiment (AJAX) airborne science project based out of NASA Ames Research Center performed eight science flights in coordination with the California Baseline Ozone Transport Study (CABOTS) campaign. Many of these flights included a series of vertical profiles (~ 0-5 km) distributed roughly along either a North/South or East/West transect. Some flights also connected the fixed-location measurements at Visalia (TOPAZ ozone lidar) and Bodega Bay (ozonesondes). AJAX measured ozone, carbon dioxide, methane, water vapor, and 3-D winds on each flight, and those in situ measurements are the basis of the data sets collected here. Trace gas data sets including time and aircraft position have been delivered as comma-separated-value text files. Meteorological data (temperature, pressure and 3-dimensional winds) are provided at 1 Hz in ICARTT-compliant text files.

Iraci, Laura T.↗
DOE OSTI2023

2.2.3.106 - Lignin-First Biorefinery Development

The Lignin-First Biorefinery Development (LigFirst) project aims to develop a cost-effective, and scalable biomass fractionation strategy based on reductive catalytic fractionation (RCF). The RCF process uses a protic solvent, hydrogen gas or a hydrogen donor, and a metal catalyst in the presence of intact biomass to produce a stable, depolymerized lignin oil and a polysaccharide pulp, which can both be converted to value-added products in parallel processes. RCF is a promising strategy to enable the use of woody feedstocks in biochemical conversion processes and is also promising as a means to valorize lignin with equal emphasis to biomass carbohydrates. Guided by techno-economic analysis and life cycle assessment and in collaboration with industry partners, we are actively developing RCF methods to 1) avoid the need for exogenous hydrogen gas, 2) substantially reduce reactor pressure via use of low vapor pressure solvents, 3) separate the lignin solvolysis and catalytic processes through reaction engineering solutions, 4) reduce solvent loading below what can be achieved in typical batch reactors, and 5) avoid or minimize the use of organic solvents. The LigFirst project also collaborates closely with the Lignin Utilization and Lignin Conversion-to-SAF projects for critical substrate handoffs and analytics. Overall, the LigFirst project is enabling new approaches that ultimately can enable RCF to be a feedstock-agnostic method to valorize both polysaccharides and lignin.

BIOMASS FUELS↗
DOE OSTI2023

Seizure detection device

A method of detecting a seizure includes collecting volatile organic compounds with a collector material of a collector; separating a mixture of the volatile organic compounds into its constituent chemicals with a gas chromatography column; ionizing the constituent chemicals to create ionized chemicals and detecting the ionized chemicals; and analyzing the ionized chemicals to identify seizure-indicative volatile organic compounds.

Arnold, Gary Stephen↗
NASA NTRS1994

Noble gases in presolar diamonds I: Three distinct components and their implications for diamond origins

High-purity separates of presolar diamond were prepared from 14 primitive chondrites from 7 compositional groups. Their noble gases were measured using stepped pyrolysis. Three distinct noble gas components are present in diamonds, HL, P3, and P6, each of which is found to consist of five noble gases. P3, released between 200 C and 900 C, has a 'planetary' elemental abundance pattern and roughly 'normal' isotopic ratios. HL, consisting of isotopically anomalous Xe-HL and Kr-H, Ar with high Ar-38/Ar-36, and most of the gas making up Ne-A2 and He-A, is released between 1100 C and 1600 C. HL has 'planetary' elemental ratios, except that it has much more He and Ne than other known 'planetary' components. HL gases are carried in the bulk diamonds, not in some trace phase. P6 has a slightly higher median release temperature than HL and is not cleanly separated from HL by stepped pyrolysis. Our data suggest that P6 has roughly 'normal' isotopic compositions and 'planetary' elemental ratios. Both P3 and P6 seem to be isotopically distinct from P1, the dominant 'planetary' noble-gas component in primitive chondrites. Release characteristics suggest that HL and P6 are sited in different carriers within the diamond fractions, while P3 may be sited near the surfaces of the diamonds. We find no evidence of separability of Xe-H and Xe-L or other isotopic variations in the HL component. However, because approximately 10(exp 10) diamonds are required to measure a Xe composition, a lack of isotopic variability does not constrain diamonds to come from a single source. In fact, the high abundance of diamonds in primitive chondrites and the presence of at least three distinct noble-gas components strongly suggest that diamonds originated in many sources. Relative abundances of noble-gas components in diamonds correlate with degree of thermal processing, indicating that all meteorites sampled essentially the same mixture of diamonds. That mixture was probably inherited from the Sun's parent molecular cloud.

Huss, Gary R.↗
DOE OSTI2023

Phase diagram to demarcate supercritical, transcritical, and continuous phase regimes for binary fluid equilibrium mixing relevant to combustion applications

Here, a robust methodology to develop phase diagrams of binary fluid mixtures at fixed thermo dynamic conditions (pressure, temperature, and mole fraction) as well as of two initially separated fluids undergoing mixing near critical conditions are presented for fluids and con ditions relevant to rockets, gas turbines, and diesel engine applications. Phase equilibria of mixtures is first examined to provide insight into the continuous-phase mixing behavior (including but not limited to supercritical behavior), and to develop a broadly applicable phase-diagram for binary fluid mixtures at fixed conditions. Next, adiabatic mixing theory and reduced Helmholtz equations of state are used to predict the thermodynamic conditions required to attain continuous-phase binary fluid mixing near critical conditions. Then, a 3D surface diagram (P,T fuel ,T amb ) separating single and two-phase regions is constructed by varying the ambient pressure and the initial temperatures of the two fluids. Polynomial fits of the 3D surfaces for 10 different binary mixtures are tabulated for nitrogen-alkane and methane-oxygen blends relevant to air-breathing and propellant based engines, respectively.

42 ENGINEERING↗
DOE OSTI2020

Deposition of an ultrathin palladium (Pd) coating on SAPO-34 membranes for enhanced H 2 /N 2 separation

Hydrogen energy has attracted great attention due to its properties of high energy transferring efficiency and zero pollution emission. Zeolite membranes are promising candidates for H 2 separation because of their uniform, molecular-sized pores and high thermal and mechanical stabilities. However, thicker membranes or modification treatments are often necessary to eliminate the defects formed during synthesis and post calcination, leading to low gas permeance. In this paper, we reported the deposition of an ultrathin palladium (Pd) coating on SAPO-34 membranes to improve H 2 separation performance. H 2 /N 2 selectivity was greatly increased by deposition of an ultrathin Pd coating on SAPO-34 membranes, while maintaining similar H 2 permeance. This might be attributed to the dissociative adsorption and associative desorption of H 2 on Pd, as well as fast diffusion of H 2 through ultrathin Pd coating. We also noticed that excessive Pd deposition would lead to the formation of cracks on SAPO-34 membranes, leading to deteriorated membrane performance.

08 HYDROGEN↗
NASA NTRS2008

Computational Investigation of the NASA Cascade Cyclonic Separation Device

Devices designed to replace the absent buoyancy separation mechanism within a microgravity environment are of considerable interest to NASA as the functionality of many spacecraft systems are dependent on the proper sequestration of interpenetrating gas and liquid phases. Inasmuch, a full multifluid Euler-Euler computational fluid dynamics investigation has been undertaken to evaluate the performance characteristics of one such device, the Cascade Cyclonic Separator, across a full range of inlet volumetric quality with combined volumetric injection rates varying from 1 L/min to 20 L/min. These simulations have delimited the general modes of operation of this class of devices and have proven able to describe the complicated vortex structure and induced pressure gradients that arise. The computational work has furthermore been utilized to analyze design modifications that enhance the overall performance of these devices. The promising results indicate that proper CFD modeling may be successfully used as a tool for microgravity separator design.

Hoyt, Nathaniel C.↗
NASA NTRS1995

Measurement of precipitation induced FUV emission and Geocoronal Lyman Alpha from the IMI mission

This final report describes the activities of the Lockheed Martin Palo Alto Research Laboratory in studying the measurement of ion and electron precipitation induced Far Ultra-Violet (FUV) emissions and Geocoronal Lyman Alpha for the NASA Inner Magnetospheric Imager (IMI) mission. this study examined promising techniques that may allow combining several FUV instruments that would separately measure proton aurora, electron aurora, and geocoronal Lyman alpha into a single instrument operated on a spinning spacecraft. The study consisted of two parts. First, the geocoronal Lyman alpha, proton aurora, and electron aurora emissions were modeled to determine instrument requirements. Second, several promising techniques were investigated to determine if they were suitable for use in an IMI-type mission. Among the techniques investigated were the Hydrogen gas cell for eliminating cold geocoronal Lyman alpha emissions, and a coded aperture spectrometer with sufficient resolution to separate Doppler shifted Lyman alpha components.

Mende, Stephen B.↗
NASA NTRSDate not supplied

A Dynamic Testing Approach for Particulate Erosion–Corrosion for Gas Turbine Coatings

Particle interactions in gas turbine engines can be multicomponent, complex phenomena leading to the degradation of thermal (TBCs) and environmental barrier coatings (EBCs) meant to protect engine components. Ingestion of particles into the engine can lead to recession of coatings due to particle erosion. Similarly, these same particles can become molten, adhere to coatings and result in thermochemical corrosion of coating materials. Particle erosion testing is often carried out where the particles are injected into a gas stream, accelerated within a nozzle, and impinge on sample. Conversely, most molten particle corrosion testing is often done in static laboratory furnaces, which does not capture the dynamic nature of deposition in application. Nevertheless, these damage mechanisms are often tested separately and no single standard exists to test both erosive and corrosive particle interactions with coating materials under relevant operating conditions for gas turbine engines. Understanding the synergies of particle interactions in engines is crucial in determining operating lifetimes of potential coating materials. Such considerations emphasize the need for realistic approaches in standardizing particle interaction testing in combustion environments. The current study outlines initial efforts at NASA Glenn’s Erosion Burner Rig Facility in improving dynamic erosion/corrosion testing methods by assessing the durability of state-of-the-art (SOA) TBC material 7 wt.% yttria stabilized zirconia (7YSZ) as a function of particle deposition rate, burner temperature, and particle size. Calibration data to determine particle deposition rate will be presented, and mass and optical profilometry measurements were utilized to estimate mass/volume loss versus deposition per increment of particulate used over time. Electron microscopy analyses were then carried out to assess coating damage after testing.

TBC↗
NASA NTRSDate not supplied

A Dynamic Testing Approach for Particulate Erosion–Corrosion for Gas Turbine Coatings

Particle interactions in gas turbine engines can be multicomponent, complex phenomena leading to the degradation of thermal (TBCs) and environmental barrier coatings (EBCs) meant to protect engine components. Ingestion of particles into the engine can lead to recession of coatings due to particle erosion. Similarly, these same particles can become molten, adhere to coatings and result in thermochemical corrosion of coating materials. Particle erosion testing is often carried out where the particles are injected into a gas stream, accelerated within a nozzle, and impinge on sample. Conversely, most molten particle corrosion testing is often done in static laboratory furnaces, which does not capture the dynamic nature of deposition in application. Nevertheless, these damage mechanisms are often tested separately and no single standard exists to test both erosive and corrosive particle interactions with coating materials under relevant operating conditions for gas turbine engines. Understanding the synergies of particle interactions in engines is crucial in determining operating lifetimes of potential coating materials. Such considerations emphasize the need for realistic approaches in standardizing particle interaction testing in combustion environments. The current study outlines initial efforts at NASA Glenn’s Erosion Burner Rig Facility in improving dynamic erosion/corrosion testing methods by assessing the durability of state-of-the-art (SOA) TBC material 7 wt.% yttria stabilized zirconia (7YSZ) as a function of particle deposition rate, burner temperature, and particle size. Calibration data to determine particle deposition rate will be presented, and mass and optical profilometry measurements were utilized to estimate mass/volume loss versus deposition per increment of particulate used over time. Electron microscopy analyses were then carried out to assess coating damage after testing.

TBC↗
NASA NTRSDate not supplied

A Dynamic Testing Approach for Particulate Erosion–Corrosion for Gas Turbine Coatings

Particle interactions in gas turbine engines can be multicomponent, complex phenomena leading to the degradation of thermal (TBCs) and environmental barrier coatings (EBCs) meant to protect engine components. Ingestion of particles into the engine can lead to recession of coatings due to particle erosion. Similarly, these same particles can become molten, adhere to coatings and result in thermochemical corrosion of coating materials. Particle erosion testing is often carried out where the particles are injected into a gas stream, accelerated within a nozzle, and impinge on sample. Conversely, most molten particle corrosion testing is often done in static laboratory furnaces, which does not capture the dynamic nature of deposition in application. Nevertheless, these damage mechanisms are often tested separately and no single standard exists to test both erosive and corrosive particle interactions with coating materials under relevant operating conditions for gas turbine engines. Understanding the synergies of particle interactions in engines is crucial in determining operating lifetimes of potential coating materials. Such considerations emphasize the need for realistic approaches in standardizing particle interaction testing in combustion environments. The current study outlines initial efforts at NASA Glenn’s Erosion Burner Rig Facility in improving dynamic erosion/corrosion testing methods by assessing the durability of state-of-the-art (SOA) TBC material 7 wt.% yttria stabilized zirconia (7YSZ) as a function of particle deposition rate, burner temperature, and particle size. Calibration data to determine particle deposition rate will be presented, and mass and optical profilometry measurements were utilized to estimate mass/volume loss versus deposition per increment of particulate used over time. Electron microscopy analyses were then carried out to assess coating damage after testing.

burner rig↗
NASA NTRS1981

On the complex state of the interplanetary medium of 28-29 July 1977

Observations of plasma and magnetic field variations in the near-Earth solar wind are discussed. Both a corotating stream and a driven shock are present. The driver gas seems to be enveloped in the rising speed phase of this stream; this appearance is attributed to a convoluted surface separating the two plasma domains. The magnetic field in the post shock flow (0030-1230 UT of July 29) has a large and geoeffective southward component at times; the energy coupling coefficient reaches approximately 5.4 x 10 to the 19th power ergs/s. In the driver gas (1230 UT of July 29 to 0110 of July 30) the magnetic field is dominantly northward. The density and dynamic pressure decrease by almost two orders of magnitude (100 to 2 cm/3) from just behind the interplanetary shock to approximately 3 hours into the driver gas flow. The dominant magnetic field variation in the driver gas is modeled by a cloud-like structure. Significant plasma parameter variations within the driver gas are attributed to structure in the parent solar mass ejection event and to interplanetary kinematics.

King, J. H.↗
DOE OSTI2025

Understanding the Quadrupole Mass Filter and Testing a High-Resolution QMS RGA for ITER

A common type of residual gas analyzer is the quadrupole mass spectrometer. One of the main components within this instrument is a mass filter known as the quadrupole. It is responsible for the selective throughput of the ionized gas particles - by ascending mass number - prior to ion impacts on the analyzer (or detector) surface from which the ion current signal is generated for processing. However, the quadrupole is not fully described in relation to the electric field characteristics and the function as an ion mass separator. This paper describes the basic origins of the electrical design, the intricate assembly criteria, and performance of the quadrupole within the spectrometer. A specialized quadrupole mass spectrometer is part of a configuration for a diagnostic gas analyzer system planned for ITER, a fusion research machine. It has a verified capability, essential as a diagnostic criterion for this reactor project, to successfully deconvolute the mass signals of Helium-4 and deuterium (reactor fuel exhaust gases, separated by only 0.026 atomic mass units), down to a relative three-percent concentration of the former gas. The associated preliminary testing, performed at the Oak Ridge National Laboratory, is also addressed. Finally, one of the key parameters used to express gas concentration, the relative sensitivity factor, will be explained, including an evaluation of dependency on other variables.

Marcus, Chris [ORNL] (ORCID:0000000190139636)↗