Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRID MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

SWMF Global Magnetosphere Simulations of January 2005: Geomagnetic Indices and Cross-Polar Cap Potential

We simulated the entire month of January, 2005 using the Space Weather Modeling Framework (SWMF) with observed solar wind data as input. We conducted this simulation with and without an inner magnetosphere model, and tested two different grid resolutions. We evaluated the model's accuracy in predicting Kp, Sym-H, AL, and cross polar cap potential (CPCP). We find that the model does an excellent job of predicting the Sym-H index, with an RMSE of 17-18 nT. Kp is predicted well during storm-time conditions, but over-predicted during quiet times by a margin of 1 to 1.7 Kp units. AL is predicted reasonably well on average, with an RMSE of 230-270 nT. However, the model reaches the largest negative AL values significantly less often than the observations. The model tended to over-predict CPCP, with RMSE values on the order of 46-48 kV. We found the results to be insensitive to grid resoution, with the exception of the rate of occurrence for strongly negative AL values. As a result, the use of the inner magnetosphere component, however, affected results significantly, with all quantities except CPCP improved notably when the inner magnetosphere model was on.

54 ENVIRONMENTAL SCIENCES↗

The NASA-Goddard Multi-Scale Modeling Framework - Land Information System: Global Land/atmosphere Interaction with Resolved Convection

The present generation of general circulation models (GCM) use parameterized cumulus schemes and run at hydrostatic grid resolutions. To improve the representation of cloud-scale moist processes and landeatmosphere interactions, a global, Multi-scale Modeling Framework (MMF) coupled to the Land Information System (LIS) has been developed at NASA-Goddard Space Flight Center. The MMFeLIS has three components, a finite-volume (fv) GCM (Goddard Earth Observing System Ver. 4, GEOS-4), a 2D cloud-resolving model (Goddard Cumulus Ensemble, GCE), and the LIS, representing the large-scale atmospheric circulation, cloud processes, and land surface processes, respectively. The non-hydrostatic GCE model replaces the single-column cumulus parameterization of fvGCM. The model grid is composed of an array of fvGCM gridcells each with a series of embedded GCE models. A horizontal coupling strategy, GCE4fvGCM4Coupler4LIS, offered significant computational efficiency, with the scalability and I/O capabilities of LIS permitting landeatmosphere interactions at cloud-scale. Global simulations of 2007e2008 and comparisons to observations and reanalysis products were conducted. Using two different versions of the same land surface model but the same initial conditions, divergence in regional, synoptic-scale surface pressure patterns emerged within two weeks. The sensitivity of largescale circulations to land surface model physics revealed significant functional value to using a scalable, multi-model land surface modeling system in global weather and climate prediction.

cumulus schemes↗

Boundary-Layer-Coupled and Decoupled Clouds in Global Storm-Resolving Models: Comparisons With the ARM Observations

The accurate representation of interactions between clouds and planetary boundary layer (PBL) is a persistent challenge in climate models, critical for simulating surface energy budget. The emergence of kilometer-grid-scale global storm resolving models (GSRMs) offers the potential for enhanced details of PBL processes in these complex interactions. This study evaluates the representation of PBL-coupled and decoupled clouds in nine GSRM simulations against extensive ground-based observations by the Department of Energy Atmospheric Radiation Measurement (ARM) program, across six sites encompassing diverse regimes such as marine and continental environments in tropics and midlatitude. By differentiating coupling based on the relative positions between cloud bases and PBL tops, our analysis focuses on the simulation of PBL height, cloud frequency, position and vertical extent. The GSRMs generally exhibit commendable agreements with observed cloud structures and PBL diurnal cycles across different ARM sites. In contrast to the relatively consistent representation of decoupled clouds, discrepancies exist between the simulated and the observed coupled clouds, particularly in areas of intense convection, for example, over tropical rainforests and mountainous regions. These biases are probably associated with the models' tendency to underestimate the boundary layer humidity and the frequency of coupled clouds within different ranges of PBL heights. This study underscores the importance for continuous improvements in the representation of boundary layer and convection within these global kilometer-grid-scale models.

54 ENVIRONMENTAL SCIENCES↗

Cross-scale modeling of storm surge, tide, and inundation in Mid-Atlantic Bight and New York City during Hurricane Sandy, 2012

Driven by high-resolution NAM (North America Mesoscale) and ECMWF (European Centre for Medium-Range Weather Forecasts) atmospheric fields, a 3-D unstructured grid SCHISM (Semi-implicit Cross-scale Hydroscience Integrated System Model) was applied to simulate total water level in the Mid-Atlantic Bight during Hurricane Sandy in 2012. The simulated storm surge, tide, significant wave height, and wave peak period results compared favorably with NOAA observations along US East Coast, Long Island Sound, and New York Harbor. The maximum total water level at The Battery in the New York Harbor was accurately simulated with an absolute error of less than 0.08 m (out of 2.9 m peak surge) and a timing difference less than 10 min, which includes the effects on the order of 0.1–0.3 m (5–10%) from the coastal setup induced by the surface waves. The scenario comparisons of (1) “NAM” versus “ECMWF”, (2) “2-D” versus “3-D”, and (3) “with” versus “without” wind wave model were examined. The 3-D barotropic model forced by ECMWF including the effects of wind waves performs the best, attributed to wave-induced radiation stress and reduction of bottom stress when the 3-D version is used. Simultaneously, the ELCIRC-Sub model, using a 5-m topography/bathymetry sub-grid and a regular 200-m resolution finite volume computational model grid, was developed to simulate the street-level inundation in New York City. The momentum and mass fluxes calculated by the coarser base grid model were effectively coupled with the sub-grid so that running a full-blown high-resolution base model is not required. The ELCIRC-Sub model uses MPI (Message Passing Interface) parallel computing to enlarge the coverage of the land surface and an efficient non-linear solver to improve the accuracy of the wetting-and-drying processes. The temporal comparisons of modeled water level with NOAA's tidal stations and USGS' rapid-deployed gauges showed overall performance with an average error of 0.1 m. Particularly, ELCIRC-Sub captured the profile of the highest peak surge (3.9 m), which rose 2 m within 3 hour at Kings Point, NY. The spatial comparisons of the modeled peak water level at 80 surveyed locations showed an average error less than 0.13 m. The modeled maximum inundation extent also matched well with an 80% hit rate against FEMA's Hurricane Sandy maximum flooding extent.

54 ENVIRONMENTAL SCIENCES↗

Gyrokinetic large eddy simulations

The large eddy simulation approach is adapted to the study of plasma microturbulence in a fully three-dimensional gyrokinetic system. Ion temperature gradient driven turbulence is studied with the GENE code for both a standard resolution and a reduced resolution with a model for the sub-grid scale turbulence. A simple dissipative model for representing the effect of the sub-grid scales on the resolved scales is proposed and tested. Once calibrated, the model appears to be able to reproduce most of the features of the free energy spectra for various values of the ion temperature gradient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduced-Order Modeling of Aggregated Thermostatic Loads With Demand Response

Demand Response is playing an increasingly important role in smart grid control strategies. Modeling the behavior of populations of appliances under demand response is especially important to evaluate the effectiveness of these demand response programs. In this paper, an aggregated model is proposed for a class of Thermostatically Controlled Loads (TCLs). The model efficiently includes statistical information of the population, systematically deals with heterogeneity, and accounts for a second-order effect necessary to accurately capture the transient dynamics in the collective response. However, an accurate characterization of the collective dynamics however requires the aggregate model to have a high state space dimension. Most of the existing model reduction techniques require the stability of the underlying system which does not hold for the proposed aggregated model. In this work, a novel model reduction approach is developed for the proposed aggregated model, which can significantly reduce its complexity with small performance loss. The original and the reducedorder aggregated models are validated against simulations of thousands of detailed building models using GridLAB-D, which is a realistic open source distribution simulation software. Index Terms – demand response, aggregated model, ancillary

Zhang, Wei↗

Internal Passage Heat Transfer Prediction Using Multiblock Grids and a Kappa-Omega Turbulence Model

Numerical simulations of the three-dimensional flow and heat transfer in a rectangular duct with a 180 C bend were performed. Results are presented for Reynolds numbers of 17,000 and 37,000 and for aspect ratios of 0.5 and I.O. A kappa-omega turbulence model with no reference to distance to a wall is used. Direct comparison between single block and multiblock grid calculations are made. Heat transfer and velocity distributions are compared to available literature with good agreement. The multi-block grid system is seen to produce more accurate results compared to a single-block grid with the same number of cells.

Rigby, David L.↗

National power grid simulation capability : need and issues

On December 9 and 10, 2008, the Department of Homeland Security (DHS) Science and Technology Directorate sponsored a national workshop at Argonne National Laboratory to explore the need for a comprehensive modeling and simulation capability for the national electric power grid system. The workshop brought together leading electric power grid experts from federal agencies, the national laboratories, and academia to discuss the current state of power grid science and engineering and to assess if important challenges are being met. The workshop helped delineate gaps between grid needs and current capabilities and identify issues that must be addressed if a solution is to be implemented. This report is a result of the workshop and highlights power grid modeling and simulation needs, the barriers that must be overcome to address them, and the benefits of a national power grid simulation capability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electromagnetic Transient Modeling of Data Centers

This report serves as a user manual for the accompanying EMT model library developed by the National Laboratory of the Rockies (NLR) for various equipment in large data centers. The EMT model library enables detailed modeling of large data center loads for conducting grid stability studies. The EMT model library for data centers include detailed models of a 5.5 kW power supply unit (PSU), a 2.5 uninterruptible power supply (UPS), a 260 MW gas turbine-generator, a 500 kW motor load, and a 33 kW IT rack. These components represent all major equipment in data centers that need to be modeled for performing grid stability studies for data centers.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A high order characteristic discontinuous Galerkin scheme for advection on unstructured meshes

A new characteristic discontinuous Galerkin (CDG) advection scheme is presented. In contrast to standard discontinuous Galerkin schemes, the test functions themselves follow characteristics in order to ensure conservation and the edges of each element are also traced backwards along characteristics in order to create a swept region , which is integrated in order to determine the mass flux across the edge. Both the accuracy and performance of the scheme are greatly improved by the use of large Courant–Friedrichs–Lewy numbers for a shear flow test case and the scheme is shown to scale sublinearly with the number of tracers being advected, outperforming a standard flux corrected transport scheme for 10 or more tracers with a linear basis. Moreover the CDG scheme may be run to arbitrarily high order spatial accuracy and on unstructured grids, and is shown to give the correct order of error convergence for piecewise linear and quadratic bases on regular quadrilateral and hexahedral planar grids. Using a modal Taylor series basis, the scheme may be made monotone while preserving conservation with the use of a standard slope limiter, although this reduces the formal accuracy of the scheme to first order. The second order scheme is roughly as accurate as the incremental remap scheme with nonlocal gradient reconstruction at half the horizontal resolution. Furthermore, the scheme is being developed for implementation within the Model for Prediction Across Scales (MPAS) Ocean model, an unstructured grid finite volume ocean model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The GEWEX LandFlux project: Evaluation of model evaporation using tower-based and globally gridded forcing data

Determining the spatial distribution and temporal development of evaporation at regional and global scales is required to improve our understanding of the coupled water and energy cycles and to better monitor any changes in observed trends and variability of linked hydrological processes. With recent international efforts guiding the development of long-term and globally distributed flux estimates, continued product assessments are required to inform upon the selection of suitable model structures and also to establish the appropriateness of these multi-model simulations for global application. In support of the objectives of the Global Energy and Water Cycle Exchanges (GEWEX) LandFlux project, four commonly used evaporation models are evaluated against data from tower-based eddy-covariance observations, distributed across a range of biomes and climate zones. The selected schemes include the Surface Energy Balance System (SEBS) approach, the Priestley–Taylor Jet Propulsion Laboratory (PT-JPL) model, the Penman–Monteith-based Mu model (PM-Mu) and the Global Land Evaporation Amsterdam Model (GLEAM). Here we seek to examine the fidelity of global evaporation simulations by examining the multi-model response to varying sources of forcing data. To do this, we perform parallel and collocated model simulations using tower-based data together with a global-scale grid-based forcing product. Through quantifying the multi-model response to high-quality tower data, a better understanding of the subsequent model response to the coarse-scale globally gridded data that underlies the LandFlux product can be obtained, while also providing a relative evaluation and assessment of model performance. Using surface flux observations from 45 globally distributed eddy-covariance stations as independent metrics of performance, the tower-based analysis indicated that PT-JPL provided the highest overall statistical performance (0.72; 61 W m –2 ; 0.65), followed closely by GLEAM (0.68; 64 W m –2 ; 0.62), with values in parentheses representing the R 2 , RMSD and Nash–Sutcliffe efficiency (NSE), respectively. PM-Mu (0.51; 78 W m –2 ; 0.45) tended to underestimate fluxes, while SEBS (0.72; 101 W m –2 ; 0.24) overestimated values relative to observations. A focused analysis across specific biome types and climate zones showed considerable variability in the performance of all models, with no single model consistently able to outperform any other. Results also indicated that the global gridded data tended to reduce the performance for all of the studied models when compared to the tower data, likely a response to scale mismatch and issues related to forcing quality. Rather than relying on any single model simulation, the spatial and temporal variability at both the tower- and grid-scale highlighted the potential benefits of developing an ensemble or blended evaporation product for global-scale LandFlux applications. Hence, challenges related to the robust assessment of the LandFlux product are also discussed.

58 GEOSCIENCES↗

Application of the AI2 Climate Emulator to E3SMv2's Global Atmosphere Model, With a Focus on Precipitation Fidelity

Abstract Can the current successes of global machine learning‐based weather simulators be generalized beyond 2‐week forecasts to stable and accurate multiyear runs? The recently developed AI2 Climate Emulator (ACE) suggests this is feasible, based upon 10‐year simulations with a network trained on output from a physics‐based global atmosphere model using a grid spacing of approximately 110 km and forced by a repeating annual cycle of sea‐surface temperature. Here we show that ACE, without modification, can be trained to emulate another major atmospheric model, EAMv2, run at a comparable grid spacing for at least 10 years with similarly small climate biases—a prerequisite to wider applicability. With an analysis that combines multiple temporal, spatial, and frequency domain perspectives, we show that ACE faithfully represents the spatiotemporal structure of EAMv2 precipitation and related variables. Finally, we show that a pretrained ACE network is able to adapt to a new global climate model simulation data set with 10 fewer training steps than when starting from random initialization, all while still maintaining low levels of climate bias. Further analysis of these fine‐tuning experiments reveal ACE's intriguing ability to interpolate between distinct global climate models.

Duncan, James P. C.↗

Optimal Black Start Allocation for Power System Restoration

Equipment failures, operator errors, natural disasters and cyber-attacks can and have caused extended blackouts of the electric grid. Even though such events are rare, preparedness for them is critical because extended power outages endanger human lives, compromise national security, or result in economic losses of billions of dollars. Since most of the generating units cannot restart without connecting to an energized grid, the system operator relies on a few units with the ability to start autonomously, called Black Start (BS) units, to restore the power system. Allocating and maintaining these units is costly and can severely impact the restoration security and time. We formulate an optimization problem to optimally allocate BS units in the grid, while simultaneously optimizing over the restoration sequence. We extend existing optimal allocation models by including grid considerations such as active power nodal balance, transmission switching, nodal reactive power support and voltage limits. In order to aid the branch and bound tree that solves the resulting large scale mixed integer program, we propose a randomized heuristic that is executed multiple times in parallel on a high-performance computing environment to find feasible solutions. Here, we proceed to solve the IEEE-39, the IEEE-118, and a simplified WECC system with 225 nodes and 136 generators to near optimality.

97 MATHEMATICS AND COMPUTING↗