Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

TES Level 1 Algorithms: Interferogram Processing, Geolocation, Radiometric, and Spectral Calibration

The Tropospheric Emission Spectrometer (TES) on the Earth Observing System (EOS) Aura satellite measures the infrared radiance emitted by the Earth's surface and atmosphere using Fourier transform spectrometry. The measured interferograms are converted into geolocated, calibrated radiance spectra by the L1 (Level 1) processing, and are the inputs to L2 (Level 2) retrievals of atmospheric parameters, such as vertical profiles of trace gas abundance. We describe the algorithmic components of TES Level 1 processing, giving examples of the intermediate results and diagnostics that are necessary for creating TES L1 products. An assessment of noise-equivalent spectral radiance levels and current systematic errors is provided. As an initial validation of our spectral radiances, TES data are compared to the Atmospheric Infrared Sounder (AIRS) (on EOS Aqua), after accounting for spectral resolution differences by applying the AIRS spectral response function to the TES spectra. For the TES L1 nadir data products currently available, the agreement with AIRS is 1 K or better.

infrared remote sensing↗

A Channelized 2nd IF/LO Downconverter for the E0S Microwave Limb Sounder

The Earth Observing System (EOS) Microwave Limb Sounder (MLS) is scheduled for launch in 2004 on the EOS Aura spacecraft. The design, assembly and test of the flight 2nd Intermediate Frequency/ Local Oscillator (2nd IF/LO) subsystem for this instrument has been completed and is presented here. The 2nd IF/LO subsystem consists of 5 separate microwave assemblies, 1 for each of the 5 millimeter wave radiometer front ends, providing a total of 33 separate IF channels. Some key requirements of the subsystem are as follows: provide frequency multiplexing of overlapping or closely spaced 1st IF channels while maintaining low ripple in the passbands; generate 19 different 2nd LO frequencies, in the range of 4-20 GHz, with low phase noise and a placement resolution of 400 KHz; downconvert the 1st IF's to a common 2nd IF frequency centered at 900 MHz; minimize cost and schedule by using common designs for the 5 different assemblies wherever possible.

intermediate frequency/local oscillator (IF/LO)↗

Data are from Mars, Tools are from Venus

Although during the data production phase, the data producers will usually ensure the products to be easily used by the specific power users the products serve. However, most data products are also posted for general public to use. It is not straightforward for data producers to anticipate what tools that these general end-data users are likely to use. In this talk, we will try to help fill in the gap by going over various tools related to Earth Science and how they work with the existing NASA HDF (Hierarchical Data Format) data products and the reasons why some products cannot be visualized or analyzed by existing tools. One goal is for to give insights for data producers on how to make their data product more interoperable. On the other hand, we also provide some hints for end users on how to make tools work with existing HDF data products. (tool category list: check the comments) HDF-EOS tools: HDFView HDF-EOS Plugin, HEG, h4tonccf, hdf-eos2 dumper, NCL, MATLAB, IDL, etc.net; CDF-Java tools: Panoply, IDV, toosUI, NcML, etc.net; CDF-C tools: ArcGIS Desktop, GrADS, NCL, NCO, etc.; GDAL tools: ArcGIS Desktop, QGIS, Google Earth, etc.; CSV tools: ArcGIS Online, MS Excel, Tableau, etc.

hdf↗

The thermal equation of state of (Mg, Fe)SiO 3 bridgmanite (perovskite) and implications for lower mantle structures

The high–pressure/high–temperature equation of state (EOS) of synthetic 13% Fe–bearing bridgmanite (Mg silicate perovskite) is measured using powder X–ray diffraction in a laser–heated diamond anvil cell with a quasi–hydrostatic neon pressure medium. We compare these results, which are consistent with previous 300 K sound speed and compression studies, with a reanalysis of Fe–free Mg end–member data from Tange et al. (2012) to determine the effect of iron on bridgmanite's thermoelastic properties. EOS parameters are incorporated into an ideal lattice mixing model to probe the behavior of bridgmanite at deep mantle conditions. With this model, a nearly pure bridgmanite mantle composition is shown to be inconsistent with density and compressibility profiles of the lower mantle. We also explore the buoyant stability of bridgmanite over a range of temperatures and compositions expected for Large Low–Shear Velocity Provinces, concluding that bridgmanite–dominated thermochemical piles are more likely to be passive dense layers externally supported by convection, rather than internally supported metastable domes. Here, the metastable dome scenario is estimated to have a relative likelihood of only 4–7%, given the narrow range of compositions and temperatures consistent with seismic constraints. If buoyantly supported, such structures could not have remained stable with greater thermal contrast early in Earth's history, ruling out formation scenarios involving a large concentration of heat producing elements.

58 GEOSCIENCES↗

Confirming a pyrolitic lower mantle using self-consistent pressure scales and new constraints on CaSiO 3 perovskite

In this study, we have examined the lower mantle composition and mineralogy by modeling the density ( ρ ), bulk sound velocity ( V Φ ), and dln ρ /dln V Φ profiles of candidate lower mantle minerals using literature and new experimental equation of state (EoS) results. Additionally, for CaSiO 3 perovskite, complimentary synchrotron X-ray diffraction measurements in a laser-heated diamond anvil cell were conducted up to 156 GPa between 1200 K and 2600 K to provide more reliable constraints on the thermal EoS parameters. These new experimental results as well as literature P-V-T data sets are systematically analyzed using an internally self-consistent pressure scale. We have modeled ρ , V Φ , and dln ρ /dln V Φ profiles of the lower mantle with representative pyrolitic and chondritic compositional models in which the effect of Fe spin transition in ferropericlase is also taken into account. Our modeling results show that a pyrolitic lower mantle with an aggregate mineralogy of 75 vol % bridgmanite, 17 vol % ferropericlase, and 8 vol % CaSiO 3 perovskite produces ρ and V Φ profiles in better agreement with preliminary reference Earth model than a lower mantle with a chondritic composition. The modeled ρ , V Φ , and dln ρ /dln V Φ are mainly affected by the relative ratio of bridgmanite and ferropericlase but are not sensitive to the variation of the CaSiO 3 perovskite content. In addition, the spin crossover of Fe in ferropericlase can greatly raise the value of dln ρ /dln V Φ in the middle lower mantle, which is useful in detecting the presence of ferropericlase in the region. Based on these new mineral physical constraints and radial seismic structure, our study suggests the lower mantle is pyrolitic, which is chemically indistinguishable from the upper mantle.

58 GEOSCIENCES↗

Thermal Equation of State of Natural Ti-Bearing Clinohumite

The natural occurrence of clinohumite in metabasalts and hydrothermally altered peridotites provides a source of water-rich minerals in subducted slabs, making knowledge of their phase relations and crystal chemistry under high pressure-temperature ( P - T ) conditions important for understating volatile recycling and geodynamic process in the Earth's mantle. Here we present a synchrotron-based, single-crystal X-ray diffraction study on two natural Ti-bearing clinohumites up to ~28 GPa and 750 K in order to simulate conditions within subducted slabs. No phase transition occurs in clinohumite over this P - T range. Pressure-volume relationships of both compositions at room temperature were fitted to a third-order Birch-Murnaghan equation of state (EoS) with V 0 = 650.4(3) Å 3 , K T 0 = 141(4) GPa, and K T 0 ' = 4.0(6) for Ti-poor clinohumite (0.07 Ti per formula unit, pfu) and V 0 = 650.8(3) Å 3 , K T 0 = 144(4) GPa, and K T 0 ' = 3.6(7) for Ti-rich clinohumite (0.21 Ti pfu). Both clinohumites exhibit anisotropic compression with β b > β c > β a . We also refined P-V-T equation of state parameters using the high-temperature Birch-Murnaghan EoS, yielding (∂ K T 0 /∂ T ) P = –0.040(10) GPa/K and α T = 5.1(6) × 10 -5 K -1 for Ti-poor clinohumite and (∂ K T 0 /∂ T ) P = –0.045(11) GPa/K and α T = 5.7(6) × 10 -5 K -1 for Ti-rich clinohumite. We report Ti-poor and Ti-rich clinohumites display similar equations of state but are ~20% more incompressible than Mg-pure clinohumite and display ~5% higher bulk sound velocity than olivine at upper mantle conditions. Our results provide constraints for modeling geodynamic process related to the subduction and transport of potentially water-rich slabs in the mantle.

58 GEOSCIENCES↗

Application of an equation‐oriented framework to formulate and estimate parameters of chemical looping reaction models

Abstract Accurate, predictive reaction models are critical for the design and optimization of chemical looping combustion (CLC) reactors. The formulation and estimation of kinetic parameters for these reaction models using a first‐principles equation‐oriented (EO) approach is particularly beneficial as large amounts of experimental data spanning process‐relevant conditions can be used to estimate parameters in a computationally tractable way. This work demonstrates the application of a novel EO framework to develop reduction reaction kinetic models of an iron‐based CLC oxygen carrier (OC). An optimization problem is formulated to estimate kinetic parameters that provide the best fit to the experimental data. The model predicts the state of the OC with mean square error values of 2.5%–4.4% across the full range of validation data, including multiple reduction cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A complementarity-based vapor-liquid equilibrium formulation for equation-oriented simulation and optimization

Vapor-Liquid Equilibrium (VLE) is a cornerstone of computer aided process engineering (CAPE). Embedded within process system models, VLE calculations are inherently procedural with non-smooth behavior that frequently require discrete decisions. Traditionally, these features resist the incorporation of VLE within efficient, large-scale equation-oriented (EO) process simulation and optimization strategies. On the other hand, recent reformulation of VLE models through the incorporation of complementarity constraints has broadened its scope to deal seamlessly with phase transitions and even supercritical excursions in process simulation and optimization. In this study, we extend these VLE complementarity models to EO frameworks where procedural thermodynamic property libraries are still required. Here, we develop an efficient, non-intrusive, and intuitive “square-flash” equation system that has been implemented within the IDAES Integrated Platform (IDAES-IP). Further, the effectiveness of this modular approach is demonstrated on case studies for non-ideal flash calculations and distillation optimization with disappearing phases and supercritical transitions.

97 MATHEMATICS AND COMPUTING↗

A Survey on Sustainable Software Ecosystems to Support Experimental and Observational Science at Oak Ridge National Laboratory

In the search for a sustainable approach for software ecosystems that supports experimental and observational science (EOS) across Oak Ridge National Laboratory (ORNL), we conducted a survey to understand the current and future landscape of EOS software and data. This paper describes the survey design we used to identify significant areas of interest, gaps, and potential opportunities, followed by a discussion on the obtained responses. The survey formulates questions about project demographics, technical approach, and skills required for the present and the next five years. The study was conducted among 38 ORNL participants between June and July of 2021 and followed the required guidelines for human subjects training. We plan to use the collected information to help guide a vision for sustainable, community-based, and reusable scientific software ecosystems that need to adapt effectively to: i) the evolving landscape of heterogeneous hardware in the next generation of instruments and computing (e.g. edge, distributed, accelerators), and ii) data management requirements for data-driven science using artificial intelligence.

Bernholdt, David↗

Cyber-Infrastructure for Data-Intensive Geospatial Computing

With the recent advent of heterogeneous High-performance Computing (HPC) to handle EO “Big Data” workloads, there is a need for a unified Cyber-infrastructure (CI) platform that can bridge the best of many HPC worlds. In this chapter, we discuss such a CI platform being developed at Geographic Information Science and Technology (GIST) group using novel and innovative techniques, and emerging technologies that are scalable to large-scale supercomputers. The CI platform utilizes a wide variety of computing such as GPGPU, distributed, real-time and cluster computing, which are being brought together architecturally to enable data-driven analysis, scientific understanding of earth system models, and research collaboration. This development addresses the need for close integration of EO and other geospatial information in the face of growing volumes of the data, and facilitates spatio-temporal analysis of disparate and dynamic data streams. Horizontal scalability and linear throughput are supported in the heart of the platform itself. It is being used to support very broad application areas, ranging from high-resolution settlement mapping, national bioenergy infrastructure to urban information and mobility systems. The platform provides spatio-temporal decision support capabilities in planning, policy and operational missions for US federal agencies. Also, the platform is designed to be functionally and technologically sustainable for continued support of the US energy and environment mission for the coming decades.

Karthik, Rajasekar↗

X-ray Diffraction Study of Arsenopyrite at High Pressure

The high-pressure X-ray diffraction study of a natural arsenopyrite was investigated up to 28.2 GPa using in situ angle-dispersive X-ray diffraction and a diamond anvil cell at National Synchrotron Light Source, Brookhaven National Laboratory. The 16:3:1 methanol-ethanol-water mixture was used as a pressure-transmitting medium. Pressures were measured using the ruby-fluorescence method. No phase change has been observed up to 28.2 GPa. The isothermal equation of state (EOS) was determined. The values of K{sub 0}, and K'{sub 0} refined with a third-order Birch-Murnaghan EOS are K{sub 0} = 123(9) GPa, and K'{sub 0} = 5.2(8). Furthermore, we confirm that the linear compressibilities ({beta}) along a, b and c directions of arsenopyrite is elastically isotropic ({beta}{sub a} = 6.82 x 10{sup -4}, {beta}{sub b} = 6.17 x 10{sup -4} and {beta}{sub c} = 6.57 x 10{sup -4} GPa{sup -1}).

43 PARTICLE ACCELERATORS↗

The influence of the Jahn-Teller effect at Fe 2+ on the structure of chromite at high pressure

The crystal structure of chromite FeCr 2 O 4 was investigated to 13.7 GPa and ambient temperature with single-crystal X-ray diffraction techniques. The unit-cell parameter decreases continuously from 8.3832 (5) to 8.2398 (11) Å up to 11.8 GPa. A fit to the Birch-Murnaghan equation of state (EoS) based on the P-V data gives: K 0 = 209 (13) GPa, K' = 4.0 (fixed), and V 0 = 588 (1) Å 3 . The FeO 4 tetrahedra and CrO 6 octahedra are compressed isotropically with pressure with their Fe-O and Cr-O bond distances decreasing from 1.996 (6) to 1.949 (7) Å and from 1.997 (3) to 1.969 (7) Å, respectively. The tetrahedral site occupied by the Fe 2+ cation is more compressible than the octahedral site occupied by the Cr 3+ cation. The resulting EoS parameters for the tetrahedral and the octahedral sites are K 0 = 147 (9) GPa, K' = 4.0 (fixed), V 0 = 4.07 (1) Å 3 and K 0 = 275 (24) GPa, K' = 4.0 (fixed), V 0 = 10.42 (2) Å 3 , respectively. A discontinuous volume change is observed between 11.8 and 12.6 GPa. This change indicates a phase transition from a cubic (space group Fd-3 – m) to a tetragonal structure (space group I4 1 /amd). At the phase transition boundary, the two Cr-O bonds parallel to the c-axis shorten from 1.969 (7) to 1.922 (17) Å and the other four Cr-O bonds parallel to the ab plane elongate from 1.969 (7) to 1.987 (9) Å. This anisotropic deformation of the octahedra leads to tetragonal compression of the unit cell along the c-axis. The angular distortion in the octahedron decreases continuously up to 13.7 GPa, whereas the distortion in the tetrahedron rises dramatically after the phase transition. At the pressure of the phase transition, the tetrahedral bond angles along the c-axis direction of the unit cell begin decreasing from 109.5 o to 106.6 (7) o , which generates a 'stretched' tetrahedral geometry. It is proposed that the Jahn-Teller effect at the tetrahedrally coordinated Fe 2+ cation becomes active with compression and gives rise to the tetrahedral angular distortion, which in turn induces the cubic-to-tetragonal transition. A qualitative molecular orbital model is proposed to explain the origin and nature of the Jahn-Teller effect observed in this structure and its role in the pressure-induced phase transition.

74 ATOMIC AND MOLECULAR PHYSICS↗

Efficient coupling of dynamic electro-optical and heat-transport models for high-power broad-area semiconductor lasers

In this work, we discuss the modeling of edge-emitting high-power broad-area semiconductor lasers. We demonstrate an efficient iterative coupling of a slow heat transport (HT) model defined on multiple vertical–lateral laser cross-sections with a fast dynamic electro-optical (EO) model determined on the longitudinal–lateral domain that is a projection of the device to the active region of the laser. Whereas the HT-solver calculates temperature and thermally-induced refractive index changes, the EO-solver exploits these distributions and provides time-averaged field intensities, quasi-Fermi potentials, and carrier densities. All these time-averaged distributions are used repetitively by the HT-solver for the generation of the heat sources entering the HT problem solved in the next iteration step.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Editorial to the special issue on the 2015 TOUGH Symposium

This Special Issue of Transport in Porous Media features selected papers from the 2015 TOUGH Symposium, which took place on September 28–30, 2015, in Berkeley, California, USA. Such symposia are held every 3 years and are a forum where users of the TOUGH family of numerical simulators meet for an open exchange on the code applications and recent enhancements. The TOUGH codes (TOUGH is an acronym for Transport of Unsaturated Groundwater and Heat) were originally developed in the early 1980s for geothermal reservoir simulation by a team of researchers at the Lawrence Berkeley National Laboratory (LBNL) headed by Karsten Pruess (see http://esd.lbl.gov/TOUGH). The TOUGH codes have a modular structure in which different fluid components can be incorporated into the code by means of a replaceable equation of state (EOS) package. Since its first release, a variety of important EOS modules have been developed, enabling the modeling of volatile organic compounds, decay chains of multiple radionuclides, gas hydrates, tight and shale gas behavior, enhanced oil recovery, and supercritical water and CO 2 . Derivatives and descendants of the basic TOUGH code include coupled multi-phase flow and reactive chemical transport; coupled thermo-hydrologic-mechanical processes; inverse modeling for parameter estimation, sensitivity analysis, and uncertainty quantification; and parallelization for multi-core PCs, workstation clusters, and supercomputers. The TOUGH codes have been applied to a large variety of problems, including geothermal and petroleum reservoir engineering, nuclear waste and CO 2 geologic sequestration, subsurface environmental remediation, methane gas hydrate production, compressed air energy storage, and many other energy and environmental applications. Finally, the international TOUGH user community currently numbers almost 400 organizations (research laboratories, government agencies, private companies, universities, etc.) in over 60 countries.

99 GENERAL AND MISCELLANEOUS↗

Study on the Extraction of Aluminum From Aluminum Dross Using Alkali Roasting and Subsequent Synthesis of Mesoporous γ-Alumina

This study presents a process for recovering aluminum from aluminum dross (an industrial waste product) via an alkali roasting process and using it to synthesize mesoporous γ-alumina. The results show that the inherent chlorides in dross (KCl and NaCl) reduce Al extraction efficiency and should be removed first by water leaching. Use of salt-free dross increases the Al extraction rate (from 85 to 96 pct) within 90 minutes alkali roasting at 923 K (650 °C). In addition, an ammonium bicarbonate byproduct can be obtained from water leaching due to the hydrolysis of AlN, which can be used as a precipitating agent in the boehmite sol preparation. Synthesis of mesoporous γ-alumina was carried out by the sol-gel method with EO{sub 20}PO{sub 70}EO{sub 20} (P123) as a template. The prepared mesoporous γ-alumina was characterized as having a disordered mesostructure with a high pore volume of 1.02 cm{sup 3}/g and surface area of 312 m{sup 2}/g. Thus, we achieved highly efficient utilization of aluminum dross and yielded products with high added value. Mesoporous γ-alumina has potential applications in environmental remediation and catalysis.

36 MATERIALS SCIENCE↗