Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Experimental studies of a high-gradient X-band welded hard-copper split accelerating structure

We report on recent research on high-gradient radio frequency (RF) accelerating structures indicates that the use of hard copper alloys provides improvement in high gradient performance over annealed copper. Such structures are made by bonding individually manufactured parts. However, there are no well-established bonding techniques that preserve the hardness, surface finish and cleanliness required for high gradient operation. To preserve the copper hardness, RadiaBeam has developed a novel high-gradient split accelerating structure, based on electron beam welding joining technique. This technique provides efficient bonding with strong, clean welds and minimal thermal loading, while maintaining a clean inner RF environment. Our RF design and fabrication methodology limits the small heat affected zone to the outer cavity envelop, with virtually no distortions or thermal loading of critical RF surfaces. It also incorporates provisions to precisely control the gap despite conventional issues with weld joint shrinkage. To date we have manufactured and validated an RF accelerating structure joined by electron-beam welding that incorporates a novel open split design to significantly reduce the assembly complexity and cost. In this paper, we will present the electromagnetic design of this structure, discuss bonding, and present the results of high-power tests, where the accelerating gradients of 140 MV m -1 with surface peak fields of 400 MV m -1 were achieved for flat-top pulse length of 600 ns with an RF breakdown rate of 10 -4 1/(pulsecm).

43 PARTICLE ACCELERATORS↗

The Mu2e crystal calorimeter

The Mu2e Experiment at Fermilab will search for coherent, neutrino-less conversion of negative muons into electrons in the field of an Aluminum nucleus, μ - + Al → e - +Al. Data collection start is planned for the end of 2021. The dynamics of such charged lepton flavour violating (CLFV) process is well modelled by a two-body decay, resulting in a mono-energetic electron with an energy slightly below the muon rest mass. If no events are observed in three years of running, Mu2e will set an upper limit on the ratio between the conversion and the capture rates R μe = μ - + A(Z,N) → e - +A(Z,N)/μ - + A(Z,N) → ν μ - +A(Z-1,N) of ≤ 6 ×10 -17 (@ 90% C.L.). This will improve the current limit of four order of magnitudes with respect to the previous best experiment. Mu2e complements and extends the current search for μ → e γ decay at MEG as well as the direct searches for new physics at the LHC . The observation of such CLFV process could be clear evidence for New Physics beyond the Standard Model. Given its sensitivity, Mu2e will be able to probe New Physics at a scale inaccessible to direct searches at either present or planned high energy colliders. To search for the muon conversion process, a very intense pulsed beam of negative muons (~ 10 10 μ/ sec) is stopped on an Aluminum target inside a very long solenoid where the detector is also located. The Mu2e detector is composed of a straw tube tracker and a CsI crystals electromagnetic calorimeter. An external veto for cosmic rays surrounds the detector solenoid. In 2016, Mu2e has passed the final approval stage from DOE and has started its construction phase. As a result, an overview of the physics motivations for Mu2e, the current status of the experiment and the required performances and design details of the calorimeter are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Whistler Mode Based Explanation for the Fast Reconnection Rate Measured in the MIT Versatile Toroidal Facility

Despite the widely discussed role of whistler waves in mediating magnetic reconnection (MR), the direct connection between such waves and the MR has not been demonstrated by comparing the characteristic temporal and spatial features of the waves and the MR process. Using the whistler wave dispersion relation, we theoretically predict the experimentally measured rise time ({tau}{sub rise}) of a few microseconds for the fast rising MR rate in the Versatile Toroidal Facility at MIT. The rise time is closely given by the inverse of the frequency bandwidth of the whistler waves generated in the evolving current sheet. The wave frequencies lie much above the ion cyclotron frequency, but they are limited to less than 0.1% of the electron cyclotron frequency in the argon plasma. The maximum normalized MR rate R=0.35 measured experimentally is precisely predicted by the angular dispersion of the whistler waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SU-E-T-512: Electromagnetic Simulations of the Dielectric Wall Accelerator

Purpose: To characterize and parametrically study the key components of a dielectric wall accelerator through electromagnetic modeling and particle tracking. Methods: Electromagnetic and particle tracking simulations were performed using a commercial code (CST Microwave Studio, CST Inc.) utilizing the finite integration technique. A dielectric wall accelerator consists of a series of stacked transmission lines sequentially fired in synchrony with an ion pulse. Numerous properties of the stacked transmission lines, including geometric, material, and electronic properties, were analyzed and varied in order to assess their impact on the transverse and axial electric fields. Additionally, stacks of transmission lines were simulated in order to quantify the parasitic effect observed in closely packed lines. Particle tracking simulations using the particle-in-cell method were performed on the various stacks to determine the impact of the above properties on the resultant phase space of the ions. Results: Examination of the simulation results show that novel geometries can shape the accelerating pulse in order to reduce the energy spread and increase the average energy of accelerated ions. Parasitic effects were quantified for various geometries and found to vary with distance from the end of the transmission line and along the beam axis. An optimal arrival time of an ion pulse relative to the triggering of the transmission lines for a given geometry was determined through parametric study. Benchmark simulations of single transmission lines agree well with published experimental results. Conclusion: This work characterized the behavior of the transmission lines used in a dielectric wall accelerator and used this information to improve them in novel ways. Utilizing novel geometries, we were able to improve the accelerating gradient and phase space of the accelerated particle bunch. Through simulation, we were able to discover and optimize design issues with the device at low cost. Funding: Morgridge Institute for Research, Madison WI; Conflict of Interest: Dr. Mackie is an investor and board member at CPAC, a company developing compact accelerator designs similar to those discussed in this work, but designs discussed are not directed by CPAC. Funding: Morgridge Institute for Research, Madison WI; Conflict of Interest: Dr. Mackie is an investor and board member at CPAC, a company developing compact accelerator designs similar to those discussed in this work, but designs discussed are not directed by CPAC.

43 PARTICLE ACCELERATORS↗

Investigating the effective range of vacuum ultraviolet-mediated breakdown in high-power microwave metamaterials

Metamaterials and periodic structures operating under high-power excitations are susceptible to breakdown. It was recently demonstrated that a localized breakdown created in a given region of a periodic structure can facilitate breakdown in other regions of the structure where the intensity of the incident electromagnetic fields may not be high enough to cause breakdown under normal circumstances. It was also demonstrated that this phenomenon is due to the generation of vacuum ultraviolet radiation at the location of the initial discharge, which propagates to the neighboring regions (e.g., other unit cells in a periodic structure) and facilitates the generation of a discharge at a lower incident power level. In this paper, we present the results of an experimental study conducted to determine the effective range of this physical phenomenon for periodic structures that operate in air and in pure nitrogen gas at atmospheric pressure levels. It is demonstrated that when breakdown is induced in a periodic structure using a high-power pulse with a frequency of 9.382 GHz, duration of 0.8 μs, and peak power level of 25 kW, this phenomenon is highly likely to happen in radii of approximately 16–17 mm from the location of the initial discharge under these test conditions. The results of this study are significant in designing metamaterials and periodic structures for high-power microwave applications as they suggest that a localized discharge created in such a periodic structure with a periodicity less than 16–17 mm can spread over a large surface and result in a distributed discharge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiphoton resonance in a three-level system with nearly degenerate excited states

An analytic study is presented of the efficient multiphoton excitation and strong harmonic generation in three-level systems specified by a pair of nearly degenerate, strongly dipole-coupled excited states. Such systems are physically formed by the three lowest states in, e.g., the hydrogen atom or evenly charged homonuclear diatomic molecular ions under reasonably chosen laser intensities. As a detailed analytic result, we found that the laser pulse of photon energy 2.05eV, duration 0.23ps, and intensity 5x10{sup 13}(W/cm{sup 2}) is able to produce complete inversion of the initial population in the hydrogen atom through the five-photon excitation. At the same photon energy, the pulse of duration 0.41ps and intensity 3.44x10{sup 14}(W/cm{sup 2}) was found to produce the same effect in the molecular ion but through the nine-photon excitation. We show that the accompanying scattering of light has very rich spectrum differing substantially from that of the two-level system.

74 ATOMIC AND MOLECULAR PHYSICS↗

Search for dimer emission from photoexcited Al{sub 4}{sup -}

Aluminum cluster anions were stored in an electrostatic ion storage ring and irradiated by a laser pulse. Neutral as well as charged decay products emitted 20 {mu}s after the excitation were identified and recorded using the daughter ion mass spectrometry method. Besides delayed electron detachment, only monomer emission was observed for Al{sub 4}{sup -}. The branching ratio for the monomer channel was determined to be 8{+-}2%, while the dimer channel was found to be <0.01%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optical characterization of a-As{sub 2}S{sub 3} thin films prepared by magnetron sputtering

It is well known that thermally evaporated a-As{sub 2}S{sub 3} thin films are prone to oxidation when exposed to ambient environment. These As{sub 2}O{sub 3} crystals can have a devastating effect on propagating light by introducing a major source of scattering loss in submicron optically integrated circuits. Magnetron sputtering a-As{sub 2}S{sub 3} not only produces films that have optical properties closer to their equilibrium state like their bulk glass counter parts, the as-deposited films also show no detectable signs of As{sub 2}O{sub 3} crystals in them when they are exposed to the ambient environment. These attributes are unique to a magnetron sputtered a-As{sub 2}S{sub 3} film and are probably caused by the ''photoannealing'' effect from the visible light emitted by the argon plasma during the sputtering process. The optical properties of a magnetron sputtered a-As{sub 2}S{sub 3} film and its propagation loss on a Ti diffused LiNbO{sub 3} waveguide are reported here. The thin film results agree closely with published data on As{sub 2}S{sub 3} bulk glass, and the optical properties of the as-deposited film are found to be closer to its bulk glass values than films made by thermal evaporation and pulsed laser deposition. The TM propagation loss at {lambda}=1.5 {mu}m of the as-deposited a-As{sub 2}S{sub 3} waveguide on Ti:LiNbO{sub 3} was 0.20{+-}0.05 dB/cm.

36 MATERIALS SCIENCE↗

Relation between crystallinity and chemical nature of surface on wettability: A study on pulsed laser deposited TiO{sub 2} thin films

Pure titania (TiO{sub 2}) polycrystalline thin films in rutile, anatase and mixed phase have been grown on amorphous glass substrates by pulsed laser deposition method at various oxygen gas pressure. Wettability investigations have been carried out on these films. Consistent with our previous report [J. Phys. D: Appl. Phys. 41, 155308 (2008)] it has been observed that for nearly same surface roughness large contact angle or superhydrophobicity is present when sample has a pure single phase and lower contact angle or hydrophobicity when mixed phases were present. Structural characterizations suggest that in addition to roughness, pure phase film surface associated with hydrophobic sites and mixed phase film surface show association of both hydrophobic and hydrophilic sites, which might be inducing specific wetting character. UV treatment induces superhydrophilicity in the films. It was observed that UV irradiation causes nonequilibrium state on the TiO{sub 2} surface, leading to changes in the electron density, which in turn produces decrement in the crystallinity and lattice expansion. Reversible changes in the wetting state on the pure phase surfaces were observed to be faster than those on the mixed phase surfaces. We tried to establish the possible relation between crystalline phases, chemical nature of surface on reversible wettability besides the main governing parameter viz. surface roughness.

36 MATERIALS SCIENCE↗

Coherent control of ultracold {sup 85}Rb trap-loss collisions with nonlinearly frequency-chirped light

We present results on coherent control of ultracold trap-loss collisions using 40-ns pulses of nonlinearly frequency-chirped light. The chirps, either positive or negative, sweep {approx}1 GHz in 100 ns and are centered at various detunings below the D{sub 2} line of {sup 85}Rb. At each center detuning, we compare the collisional rate constant {beta} for chirps that are linear in time, concave-down, and concave-up. For positive chirps, we find that {beta} generally depends very little on the shape of the chirp. For negative chirps, however, we find that {beta} can be enhanced by up to 50(20)% for the case of the concave-down shape. This occurs at detunings where the evolution of the wave packet is expected to be coherent. An enhancement at these detunings is also seen in quantum-mechanical simulations of the collisional process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion acceleration in the interaction of short pulse laser radiation with the cluster-gas target

We demonstrate generation of 10-20 MeV/u ions with a compact 4 TW laser using a gas target mixed with submicron clusters, corresponding to tenfold increase in the ion energies compared to previous experiments with solid targets. It is inferred that the high energy ions are generated due to formation of a strong dipole vortex structure. The demonstrated method has a potential to construct compact and high repetition rate ion sources for hadron therapy and other applications.

43 PARTICLE ACCELERATORS↗

High Current Cathodes Fabricated by KrF Laser Ablation

In this paper we review several high power laser ablation techniques that have been utilized to fabricate high current (1-80 kA) electron beam cathodes for accelerators and microwave sources: 1) Projection Ablation Lithography (PAL) cathodes, 2) Ablation Line Focus (ALF) cathodes, and 3) Metal-Oxide-Junction (MOJ) cathodes. Laser-ablative micromachining techniques (PAL and ALF) have been utilized to generate micron-scale features on metal substrates that provide electric field (beta) enhancement for Fowler-Nordheim emission and plasma cathodes. Since these laser-ablated patterns are directly, laser-written on the substrate metal they exhibit much higher thermal conductivity for higher current capability and increased damage thresholds. Metal-Oxide-Junction (MOJ) cathodes exploit the triple-point electron emission that occurs at the interface between metal, insulator and vacuum.The ablation laser is a KrF excimer laser with a pulse energy of 600 mJ and pulselength of 20 ns. Cathode experiments were performed on the MELBA-C accelerator: V = -300 kV, pulselength = 0.5 microsecond. Data will be presented for PAL, ALF and MOJ cathodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation and manipulation of proton beams by ultra-short laser pulses

Applying a 21-channel Thomson spectrometer setup has revealed further insight to the connection between spatial and spectral beam characteristic of laser accelerated protons. Analyzing the central emission cone (plus/minus 3 degree) shows an increasing beam divergency for protons with increasing kinetic energies. This holds for protons emitted from the same source area at the target surface. The whole beam is a well ordered system with a clear functional dependence of trajectories on proton energy. This is a consequence of the source dynamics which is determined by the sheath development in time. Thus laser-driven ion beams can be advantageously manipulated for further propagation to an experiment. We demonstrate this capability with a magnetic quadrupole and obtain a nearly parallel and monochromatized beam. Furthermore we set our achievements in beam production efficiency into context with other laser systems and demonstrate the potential of very-thin target foils.

43 PARTICLE ACCELERATORS↗

Pd nanoparticles formation by femtosecond laser irradiation and the nonlinear optical properties at 532 nm using nanosecond laser pulses

Pd nanoparticles (NPs) were prepared by focused femtosecond laser irradiation of PdCl{sub 2} dissolved in ethanol. Transmission electron microscopy (TEM) analysis revealed that Pd NPs show certain crystalline microstructure, and the average diameter is 3.4 nm with narrow size distribution from 2.0 to 6.0 nm. The nonlinear optical absorption and refraction of Pd NPs solution were investigated with nanosecond laser pulses at 532 nm. The nonlinear absorption of Pd NPs is saturable at low intensity of 3.28x10{sup 11} W/m{sup 2} but it is changed to reverse saturable with the intensity increased to 7.96x10{sup 11} W/m{sup 2}, which accordingly indicates the nonlinear refraction is changed from self-defocusing to self-focusing. The transition of the nonlinear absorption with the increase in pulse intensity is analyzed by an empirical model which includes mostly saturable absorption (SA) and two-photon absorption (TPA). The intensity of saturable I{sub s} is obtained, along with TPA coefficient {beta}. SA and TPA are both originated from the interband transition between the d band and s-p conduction band. The SA possess less occupied density of states in the ground state and less unoccupied density of states in the excited state than that of TPA, so the TPA dominates the nonlinear absorption when the pulse intensity is high, leading to as-observed transition from SA to TPA. The refraction variation with increase in pulse intensity is attributed to the interband transition of electrons from d band to s-p conduction band in the Pd NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Stabilization of Helium in Intense xuv Laser Fields

We investigate the impact of electron-electron correlation on the ionization dynamics of helium in intense, high-frequency laser fields by solving the time-dependent Schroedinger equation from first principles. Although we observe a decrease in the total ionization yield at high field strengths, the hallmark of atomic stabilization, the repulsion between the electrons has a detrimental effect on the degree of stabilization, in particular for short pulses. Investigation of the ion channel yields reveals that the double ionization process is less prone to two-electron effects, and consequently exhibits the most distinct signature of stabilization. We also find that commonly used one-dimensional models tend to overestimate the effect of correlation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Critical Fluences And Modeling Of CO{sub 2} Laser Ablation Of Polyoxymethylene From Vaporization To The Plasma Regime

A CO{sub 2} laser was operated at pulse energies up to 10 J to ablate polyoxymethylene targets in air and vacuum conditions. Critical effects predicted by ablation models are discussed in relation to the experimental data, including specifically the threshold fluences for vaporization and critical plasma formation, and the fluence at which the optimal momentum coupling coefficient is found. Finally, we discuss a new approach for modeling polymers at long wavelengths, including a connection formula that links the vaporization and plasma regimes for laser ablation propulsion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray enhancement in a nanohole target irradiated by intense ultrashort laser pulses

In this paper, we present a comparative study of the laser energy absorption, soft x-ray emission (in the water window region: 2.3-4.4 nm) and hard x-ray emission (in the 2-20 keV range) from planar aluminum and nanohole alumina of 40 nm average diameter, when irradiated by Ti:sapphire laser pulses. The laser pulse duration was varied from 45 to 500 fs, and the focused intensity on the target ranged from {approx}3 x 10{sup 16} W/cm{sup 2} to 3x10{sup 17} W/cm{sup 2}. The x-ray yield enhancement from the nanoholes shows an increased coupling of the laser energy to the target. The effect of laser pulse duration on the x-ray emission was also studied, where a resonance like phenomenon was observed. The laser energy absorption measurements in the nanoholes showed a marginal enhancement in absorption as compared to planar Al. The integrated keV x-ray yield, from nanohole alumina and planar Al, at an intensity of 3 x 10{sup 17} W/cm{sup 2}, was 25 and 3.5 {mu}J, respectively. The results can be explained by considering the hydrodynamic expansion of the laser irradiated structure and field enhancement in the nanoholes.

36 MATERIALS SCIENCE↗

Comparative and quantitative study of neutral debris emanated from tin plasmas produced by neodymium-doped yttrium-aluminum-garnet and carbon dioxide laser pulses

Amount of neutral debris emanated from extreme ultraviolet light source must be minimized to maximize its lifetime. Emanation of neutral atomic debris was experimentally investigated using laser-induced-fluorescence technique for carbon dioxide (CO{sub 2}, 10.6 {mu}m in wavelength) and Nd-doped yttrium-aluminum-garnet (Nd:YAG, 1.064 {mu}m) lasers irradiated tin foils. Total number of neutral atomic debris from CO{sub 2} laser-irradiated tin foils was 1/100 times smaller than that from Nd:YAG irradiated ones. Competitiveness of CO{sub 2} laser was revealed in terms of debris mitigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗