Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Bulk Attenuation in the Earth’s Mantle Due to Phase Transitions

The calculated bulk attenuation due to phase transition from mineral physics data is reported here. With relaxation time less than 1 s, the calculated value for a pyrolite mantle is consistent with the inverted bulk attenuation of the upper mantle from seismic observations. The two important mechanisms of phase transitions, diffusion-controlled and kinetics-controlled, have different relaxation time as indicated by the models here. The diffusion controlled is more likely to contribute to the observed seismic bulk attenuation than the kinetic-controlled process based on the available diffusivity and kinetics data. The correlation between the bulk attenuation and relaxation time emphasizes the importance of a number of parameters in the mineral physics database such as Fe-Mg diffusivity and kinetics in olivine-wadsleyite-ringwoodite-perovskite, Mg-Ca-Al-Si diffusivity and kinetics in pyroxene-garnet-Ca perovskite, some of which are still unknown.

58 GEOSCIENCES↗

Construction and Modeling of a Coculture Microplate for Real-Time Measurement of Microbial Interactions

The dynamic structures of microbial communities emerge from the complex network of interactions between their constituent microorganisms. Quantitative measurements of these interactions are important for understanding and engineering ecosystem structure. Here, we present the development and application of the BioMe plate, a redesigned microplate device in which pairs of wells are separated by porous membranes. BioMe facilitates the measurement of dynamic microbial interactions and integrates easily with standard laboratory equipment. We first applied BioMe to recapitulate recently characterized, natural symbiotic interactions between bacteria isolated from the Drosophila melanogaster gut microbiome. Specifically, the BioMe plate allowed us to observe the benefit provided by two Lactobacillus strains to an Acetobacter strain. We next explored the use of BioMe to gain quantitative insight into the engineered obligate syntrophic interaction between a pair of Escherichia coli amino acid auxotrophs. We integrated experimental observations with a mechanistic computational model to quantify key parameters associated with this syntrophic interaction, including metabolite secretion and diffusion rates. This model also allowed us to explain the slow growth observed for auxotrophs growing in adjacent wells by demonstrating that, under the relevant range of parameters, local exchange between auxotrophs is essential for efficient growth. The BioMe plate provides a scalable and flexible approach for the study of dynamic microbial interactions.

3D printed device↗

HARD X-RAY EMISSIONS FROM CASSIOPEIA A OBSERVED BY INTEGRAL

Cassiopeia A (Cas A), as the nearby young remnant of a core-collapse supernova, is the best candidate for astrophysical studies in supernova explosion and its environment. We studied the hard X-ray emission from Cas A using the 10 year data of INTEGRAL observations, and first detected non-thermal continuum emission from the source up to 220 keV. The {sup 44}Ti line emission at 68 and 78 keV is confirmed by our observations with a mean flux of ∼(2.2 ± 0.4) × 10{sup 5} ph cm{sup 2} s{sup 1}, corresponding to a {sup 44}Ti yield in Cas A of (1.3 ± 0.4) × 10{sup 4} M {sub ⊙}. The continuum emission from 3 to 500 keV can be fit with a thermal bremsstrahlung of kT ∼ 0.79 ± 0.08 keV plus a power-law model of Γ ∼ 3.13 ± 0.03. The non-thermal emission from Cas A is well fit by a power-law model without a cutoff up to 220 keV. This radiation characteristic is inconsistent with diffusive shock acceleration models with a remnant shock velocity of only 5000 km s{sup 1}. The central compact object in Cas A cannot significantly contribute to the emission above 80 keV. Some possible physical origins of the non-thermal emission above 80 keV from the remnant shock are discussed. We deduce that the asymmetrical supernova explosion scenario of Cas A is a promising scenario for the production of high-energy synchrotron radiation photons, where a portion of the ejecta with a velocity of ∼0.1 c and opening angle of ∼10° can account for the 100 keV emission, as is consistent with the “jet” observed in Cas A.

79 ASTRONOMY AND ASTROPHYSICS↗

Particle energization during solar maximum: Diffusive shock acceleration at multiple shocks

We present a model for the acceleration of particles at multiple shocks using an approach related to box models. A distribution of particles is diffusively accelerated inside the box while simultaneously experiencing decompression through adiabatic expansion and losses from the convection and diffusion of particles out of the box by either the method used in Melrose and Pope and Pope and Melrose or by the approach introduced in Zank et al. where we solve the transport equation by a method analogous to operator splitting. The second method incorporates the additional loss terms of convection and diffusion and allows for the use of a variable time between shocks. We use a maximum injection energy (E{sub max}) appropriate for quasi-parallel and quasi-perpendicular shocks. We provide a preliminary application of the diffusive acceleration of particles by multiple shocks with frequencies appropriate for solar maximum.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffuse ionizing radiation within HH jets

We present numerical hydrodynamical simulations of a time-dependent ejection velocity precessing jet. The parameters used in our models correspond to a high excitation Herbig-Haro object, such as HH 80/81. We have included the transfer of ionizing radiation produced within the shocked regions of the jet. The radiative transfer is computed with a ray-tracing scheme from all the cells with an emissivity above a certain threshold. We show the development of a radiative precursor, and compare the morphology with a model without the diffuse radiation. Our simulations show that the morphology of the Hα emission is affected considerably if the diffuse ionizing radiation is accounted for. The predicted Hα position-velocity diagram (i.e., spatially resolved emission line profiles) from a model with the transfer of ionizing radiation has a relatively strong component at zero velocity, corresponding to the radiative precursor. Qualitatively similar 'zero velocity components' are observed in HH 80/81 and in the jet from Sanduleak's star in the Large Magellanic Cloud.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of microscopic inhomogeneity of the medium on reaction-diffusion front velocity

A model of random walks on an inhomogeneous lattice is used to analyze the effect of microscopic inhomogeneity of the medium on reaction-diffusion front velocity. It is shown that the front velocity can be substantially higher on an inhomogeneous lattice as compared to that on a homogeneous one with the same onsite waiting time. The increase in velocity is due to a bias in the particle distribution between sites of different types toward those with shorter waiting times. The amount of bias depends on the rate of chemical reaction: the higher the rate, the stronger the bias. The front velocity also strongly depends on the reaction mechanism, more precisely, on how product particles are distributed between sites of different types.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superresolution Diffuse Optical Imaging by Localization of Fluorescence

The multiple scattering of light presents major challenges in realizing useful in vivo imaging at tissue depths of more than about one millimeter, where many answers to health questions lie. Visible through near-infrared photons can be readily and safely detected through centimeters of tissue; however, limited information is available for image formation. One strategy for obtaining images is to model the photon transport and a simple incoherent model is the diffusion equation approximation to the Boltzmann transport equation. Such an approach provides a prediction of the mean intensity of heavily scattered light and hence provides a forward model for optimization-based computational imaging. While diffuse optical imaging methods have received substantial attention, they remain restricted in terms of resolution because of the loss of high-spatial-frequency information that is associated with the multiple scattering of photons. Consequently, only relatively large inhomogeneities, such as tumors or organs in small animals, can be effectively resolved. We introduce a superresolution imaging approach based on point localization in a diffusion framework that enables over two orders of magnitude improvement in the spatial resolution of diffuse optical imaging. The method is demonstrated experimentally by localizing a fluorescent inhomogeneity in a highly scattering slab and characterizing the localization uncertainty. The approach allows imaging through centimeters of tissue with a resolution of tens of microns, thereby enabling cells or cell clusters to be resolved. More generally, this high-resolution imaging approach could be applied with any physical transport or wave model and hence to a broad class of physical problems. Finally, paired with a suitable optical contrast mechanism, as can be realized with targeted fluorescent molecules or genetically modified animals, superresolution diffuse imaging should open alternative dimensions for in vivo applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SkyFACT: high-dimensional modeling of gamma-ray emission with adaptive templates and penalized likelihoods

We present SkyFACT (Sky Factorization with Adaptive Constrained Templates), a new approach for studying, modeling and decomposing diffuse gamma-ray emission. Like most previous analyses, the approach relies on predictions from cosmic-ray propagation codes like GALPROP and DRAGON. However, in contrast to previous approaches, we account for the fact that models are not perfect and allow for a very large number (∼> 10{sup 5}) of nuisance parameters to parameterize these imperfections. We combine methods of image reconstruction and adaptive spatio-spectral template regression in one coherent hybrid approach. To this end, we use penalized Poisson likelihood regression, with regularization functions that are motivated by the maximum entropy method. We introduce methods to efficiently handle the high dimensionality of the convex optimization problem as well as the associated semi-sparse covariance matrix, using the L-BFGS-B algorithm and Cholesky factorization. We test the method both on synthetic data as well as on gamma-ray emission from the inner Galaxy, |ℓ|<90{sup o} and | b |<20{sup o}, as observed by the Fermi Large Area Telescope. We finally define a simple reference model that removes most of the residual emission from the inner Galaxy, based on conventional diffuse emission components as well as components for the Fermi bubbles, the Fermi Galactic center excess, and extended sources along the Galactic disk. Variants of this reference model can serve as basis for future studies of diffuse emission in and outside the Galactic disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamics of confined reactive water in Smectic clay-zeolite composites.

The dynamics of water confined to mesoporous regions in minerals such as swelling clays and zeolites is fundamental to a wide range of resource management issues impacting many processes on a global scale, including radioactive waste containment, desalination, and enhanced oil recovery. Large-scale atomic models of freely diffusing multilayer smectite particles at low hydration confined in a silicalite cage are used to investigate water dynamics in the composite environment with the ReaxFF reactive force field over a temperature range of 300 647 K. The reactive capability of the force field enabled a range of relevant surface chemistry to emerge, including acid/base equilibria in the interlayer calcium hydrates and silanol formation on the edges of the clay and inner surface of the zeolite housing. After annealing, the resulting clay models exhibit both mono- and bilayer hydration structures. Clay surface hydration redistributed markedly and yielded to silicalite water loading. We find that the absolute rates and temperature dependence of water dynamics compare well to neutron scattering data and pulse field gradient measures from relevant samples of Ca-montmorillonite and silicalite, respectively. Within an atomistic, reactive context, our results distinguish water dynamics in the interlayer Ca(OH)2 nH2O environment from water flowing over the clay surface, and from water diffusing within silicalite. We find that the diffusion of water when complexed to Ca hydrates is considerably slower than freely diffusing water over the clay surface, and the reduced mobility is well described by a difference in the Arrhenius pre-exponential factor rather than a change in activation energy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A semi-analytical model for heat and mass transfer in geothermal reservoirs to estimate fracture surface-are-to-volume ratios and thermal breakthrough using thermally-decaying and diffusing tracers

A semi-analytical model was developed to conduct rapid scoping calculations of responses of thermally degrading and diffusing tracers in multi-well tracer tests in enhanced geothermal systems (EGS). The model is based on an existing Laplace transform inversion model for solute transport in dual-porosity media. The heat- and mass-transfer calculations are decoupled and conducted sequentially, taking advantage of the fact that heat transfer between fractures and the rock matrix is much more rapid than mass transfer and therefore mass transfer will effectively occur in a locally isothermal system (although the system will be nonisothermal along fracture flow pathways, which is accounted for by discretizing the flow pathways into multiple segments that have different temperature histories). The model takes advantage of the analogies between heat and mass transfer, solving the same governing equations with k{sub m}/({rho}C{sub p}){sub w} being substituted for {phi}D{sub m} in the equation for fracture transport and k{sub m}/({rho}C{sub p}){sub m} being subsituted for D{sub m} in the equation for matrix transport; where k = thermal conductivity (cal/cm-s-K), {rho} = density (g/cm{sup 3}), C{sub p} = heat capacity (at constant pressure) (cal/g-K), {phi} = matrix porosity, and D = tracer diffusion coefficient (cm{sup 2}/s), with the subscripts w and m referring to water and matrix, respectively. A significant advantage of the model is that it executes in a fraction of second on a single-CPU personal computer, making it very amenable for parameter estimation algorithms that involve repeated runs to find global minima. The combined thermal-mass transport model was used to evaluate the ability to estimate when thermal breakthrough would occur in a multi-well EGS configuration using thermally degrading tracers. Calculations were conducted to evaluate the range of values of Arrhenius parameters, A and E{sub {alpha}} (pre-exponential factor, 1/s, and activation energy, cal/mol) required to obtain interpretable responses of thermally-degrading tracers that decay according to the rate constant k{sub d} = Ae{sup -E{sub {alpha}}/RT}, where k{sub d} = decay rate constant (1/s), R = ideal gas constant (1.987 cal/mol-K), and T = absolute temperature (K). It is shown that there are relatively narrow ranges of A and E{sub {alpha}} that will result in readily interpretable tracer responses for any given combination of ambient reservoir temperature and working fluid residence time in a reservoir. The combined model was also used to simulate the responses of conservative tracers with different diffusion coefficients as a way of estimating fracture surface-area-to-volume ratios (SA/V) in multi-well EGS systems. This method takes advantage of the fact that the differences in breakthrough curves of tracers with different matrix diffusion coefficients are a function of SA/V. The model accounts for differences in diffusion coefficients as a function of temperature so that tracer responses obtained at different times can be used to obtain consistent estimates of SA/V as the reservoir cools down. Some single-well applications of this approach are simulated with a numerical model to demonstrate the potential to evaluate the effectiveness of EGS stimulations before a second well is drilled.

58 GEOSCIENCES↗

Nanoparticle dynamics in the spatial afterglows of nonthermal plasma synthesis reactors

Nonthermal plasma flow tube reactors are industrially scalable systems for the production of nanocrystal (NC) based materials and coatings. One key advantage of nonthermal plasma synthesis is the ability to both synthesize NCs and deposit films in a single reactor, as at the reactor outlet, NCs can be inertially deposited onto a target substrate. The size and morphology of deposited particles can substantially influence the film structure and function. Though NCs are typically near-spherical and monodispersed as-produced in plasma synthesis reactors, NC charge and growth dynamics can be altered substantially when NCs are sampled out of the plasma and through the spatial afterglow region, affecting deposition. Experiments have demonstrated changes of NC size and charge in the spatial afterglow; however, these dynamics remain unexplored and unexplained via theory and simulation. To address this, we developed a constant number Monte Carlo (CNMC) simulation model to examine the mechanisms of NC decharging and growth in the spatial afterglow of plasma flow tube reactors. Collisions between NC and plasma species, diffusive deposition, and electron desorption from NCs are incorporated in the CNMC simulation. The simulation results are specifically compared with previous experiments on Si NCs synthesized from a low pressure Ar-SiH 4 nonthermal plasma reactor. Furthermore, the experiment-model comparison shows that CNMC models can be implemented which accurately model NC size distribution evolution in a spatial afterglow. Simultaneously, results show that improved collision models, energetic species diffusion models, and electron desorption models will be necessary to accurately depict NC dynamics in spatial afterglows.

42 ENGINEERING↗

The Reactive–Diffusive Length of OH and Ozone in Model Organic Aerosols

We report that a key step in the heterogeneous oxidation of atmospheric aerosols is the reaction of ozone (O 3 ) and hydroxyl radicals (OH) at the gas–particle interface. The formation of reaction products and free radical intermediates and their spatial distribution inside the particle is a sensitive function of the length over which these oxidants diffuse prior to reaction. The reactive–diffusive length of OH and ozone at organic aerosol interfaces is determined by observing the change in the effective uptake coefficient for size-selected model aerosols comprising a reactive core and a thin nanometer-sized (0–12 nm) organic shell. The core and shell materials are selected so that they are immiscible and adopt an assumed core–shell configuration. The results indicate a reactive–diffusive length of 1.4 nm for hydroxyl (OH) radicals in squalane and 1.0 nm for ozone in squalene. Measurements for a purely diffusive system allow for an estimate for diffusion constant (1.6 × 10 -6 cm 2 /s) of ozone in squalane to be determined. In conclusion, the reactive–diffusive length offers a simple first order estimate of how shielding of aerosols by immiscible layers can alter estimates of oxidative lifetimes of aerosols in the atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the structure and mechanism of Na + diffusion in NASICON solid-state electrolytes and the effect of Sc- and Al/Y-substitution

NASICON (sodium superionic conductor) based ceramics are one of the most promising classes of solid-state electrolytes for all-solid-state batteries. However, the mechanism of sodium ion diffusion is not understood in great detail since there is still a discrepancy between reported average structure models, local structures, and the number and position of sodium sites. To close this gap, we investigate the underlying diffusion mechanism and structural changes governing the Na + transport in Na 3.4 Zr 2 Si 2.4 P 0.6 O 12 using quasielastic neutron scattering (QENS) and powder X-ray diffraction (XRD). In the temperature range from 298 K to 640 K, the correlations between structural changes of a monoclinic C2/c to rhombohedral R $\bar{3}$c phase transition and the result of ion diffusion are investigated. The analysis of the quasielastic neutron scattering data reveals two quasielastic components corresponding to the Chudley-Elliott jump-diffusion model. It clearly shows two different Na + diffusion processes, local and long-range, on two different time and length scales and allows calculations of their corresponding activation energies. Additionally, the effects of Sc 3+ and Al 3+ /Y 3+ aliovalent substitution of Zr 4+ ions on the crystal structure and Na + diffusion are also studied. We can distinguish a local, chain, and cross-chain diffusion mechanism based on correlated QENS and XRD comparison of relevant nearest crystallographic Na–Na distances. The results reveal that the Na + diffusion in these NASICONs is three-dimensional and can provide guidelines on how dopants and changes in the crystal structure can affect the Na + conductivity.

25 ENERGY STORAGE↗

Framework for predicting the fractionation of complex liquid feeds via polymer membranes

The separation of complex liquid hydrocarbon mixtures was recently demonstrated using the glassy polymer SBAD-1, showing that small molecule fractionation is possible by such organic membrane materials. Here, in this work, we develop a framework that will enable workable predictions of permeate flux and composition in complex hydrocarbon liquids through intrinsically porous glassy polymers. The predictions are made by incorporating experimentally-derived unary sorption and diffusion parameters in a Maxwell-Stefan framework coupled with multicomponent sorption models and various distinct diffusion phenomena. Across the range of sorption and diffusion phenomena considered, both the conventional Flory-Huggins model and the proposed Langmuir + Flory-Huggins sorption model combined with a simple average guest diffusivity or a more complex free-volume theory-based transport resulted in the lowest prediction error for three chosen multicomponent separations. The proposed Maxwell-Stefan framework simply requires pure component transport parameters to allow a fast approximation of the separation of multicomponent liquid hydrocarbon feeds that can potentially be extended to more complex feeds such as crude oil fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural constraint integration in a generative model for the discovery of quantum materials

Billions of organic molecules have been computationally generated, yet functional inorganic materials remain scarce due to limited data and structural complexity. Here, in this work, we introduce Structural Constraint Integration in a GENerative model (SCIGEN), a framework that enforces geometric constraints, such as honeycomb and kagome lattices, within diffusion-based generative models to discover stable quantum materials candidates. SCIGEN enables conditional sampling from the original distribution, preserving output validity while guiding structural motifs. This approach generates ten million inorganic compounds with Archimedean and Lieb lattices, over 10% of which pass multistage stability screening. High-throughput density functional theory calculations on 26,000 candidates shows over 95% convergence and 53% structural stability. A graph neural network classifier detects magnetic ordering in 41% of relaxed structures. Furthermore, we synthesize and characterize two predicted materials, TiPd 0.22 Bi 0.88 and Ti 0.5 Pd 1.5 Sb, which display paramagnetic and diamagnetic behaviour, respectively. Our results indicate that SCIGEN provides a scalable path for generating quantum materials guided by lattice geometry.

36 MATERIALS SCIENCE↗

Searching for low percolation thresholds within amphiphilic polymer membranes: The effect of side chain branching

Percolation thresholds for solvent diffusion within hydrated model polymeric membranes are derived from dissipative particle dynamics in combination with Monte Carlo (MC) tracer diffusion calculations. The polymer backbones are composed of hydrophobic A beads to which at regular intervals Y-shaped side chains are attached. Each side chain is composed of eight A beads and contains two identical branches that are each terminated with a pendant hydrophilic C bead. Four types of side chains are considered for which the two branches (each represented as [C], [AC], [AAC], or [AAAC]) are splitting off from the 8th, 6th, 4th, or 2nd A bead, respectively. Water diffusion through the phase separated water containing pore networks is deduced from MC tracer diffusion calculations. The percolation threshold for the architectures containing the [C] and [AC] branches is at a water volume fraction of ∼0.07 and 0.08, respectively. These are much lower than those derived earlier for linear architectures of various side chain length and side chain distributions. Control of side chain architecture is thus a very interesting design parameter to decrease the percolation threshold for solvent and proton transports within flexible amphiphilic polymer membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DUSTRAN – AN ATMOSPHERIC DISPERSION MODEL FOR CONSEQUENCE ASSESSMENT APPLICATIONS IN EMERGENCY OPERATIONS CENTERS

A new atmospheric dispersion modeling system is being tested for consequence assessment applications in emergency response operations. DUSTRAN is an operational, fully documented atmospheric dispersion modeling system designed originally to allow U.S. Department of Defense personnel to rapidly predict and assess the potential air quality impacts of military maneuvers at military training and testing ranges. This model also can be applied at emergency operations centers where it can fill the niche between on-site, plume-based modeling systems and the National Atmospheric Release Advisory Center off-site, particle-based modeling system. DUSTRAN offers a user-friendly graphical user interface based on the Environmental Systems Research Institute ArcMap geographic information system software that allows DUSTRAN to be easily customized to operate at any location in the world. DUSTRAN employs the U.S. Environmental Protection Agency regulatory CALPUFF modeling system to create a three-dimensional wind field and simulate downwind plume transport and diffusion. Other dispersion models also can be integrated into the DUSTRAN componentized architecture, allowing the user to choose the appropriate dispersion modeling engine for a given application. The DUSTRAN architecture also supports the development and integration of a variety of source-term models.

atmospheric dispersion modeling↗

Empirical determination of the energy band gap narrowing in p{sup +} silicon heavily doped with boron

In the analysis of highly doped silicon, energy band gap narrowing (BGN) and degeneracy effects may be accounted for separately, as a net BGN in conjunction with Fermi-Dirac statistics, or lumped together in an apparent BGN used with Boltzmann statistics. This paper presents an experimental study of silicon highly doped with boron, with the aim of evaluating the applicability of previously reported BGN models. Different boron diffusions covering a broad range of dopant densities were prepared, and their characteristic recombination current parameters J{sub 0} were measured using a contactless photoconductance technique. The BGN was subsequently extracted by matching theoretical simulations of carrier transport and recombination in each of the boron diffused regions and the measured J{sub 0} values. An evaluation of two different minority carrier mobility models indicates that their impact on the extraction of the BGN is relatively small. After considering possible uncertainties, it can be concluded that the BGN is slightly larger in p{sup +} silicon than in n{sup +} silicon, in qualitative agreement with theoretical predictions by Schenk. Nevertheless, in quantitative terms that theoretical model is found to slightly underestimate the BGN in p{sup +} silicon. With the two different parameterizations derived in this paper for the BGN in p{sup +} silicon, both statistical approaches, Boltzmann and Fermi-Dirac, provide a good agreement with the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗