Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Observations of the frequencies in a sphere wake and of drag increase by acoustic excitation

Vortex shedding and instability wave frequencies have been measured in the wakes of spheres in the Reynolds number range 500 less than Re less than 60,000. The effect of acoustic excitation was examined and an interaction between the two frequency modes was found at the lower Reynolds numbers; through this interaction, external forcing at the instability frequency could change the vortex shedding frequency. The development of the mean wake was manipulated by forcing near to the dominant shear layer instability frequency. With this forcing, the separated shear layer moved closer to the surface of the sphere and the reversed flow region of the wake was shortened. Concomitantly, the base pressure decreased and drag increased.

Kim, H. J.↗

Considerations on the moving contact-line singularity, with application to frictional drag on a slender drop

It has previously been shown that the no-slip boundary conditions leads to a singularity at a moving contact line and that this presumes some form of slip. Present considerations on the energetics of slip due to shear stress lead to a yield stress boundary condition. A model for the distortion of the liquid state near solid boundaries gives a physical basis for this boundary condition. The yield stress condition is illustrated by an analysis of a slender drop rolling down an incline. That analysis provides a formula for the frictional drag resisting the drop movement. With the present boundary condition, the length of the slip region becomes a property of the fluid flow.

Durbin, P. A.↗

Optimization of natural laminar flow airfoils for high section lift-to-drag ratios in the lower Reynolds number range

Relatively thin natural-laminar-flow airfoils were arranged optimally for different design lift coefficients in the wing chord Reynolds number ranges of 200,000-600,00 and 0.875 x 10 to the 6th to 2 x 10 to the 6th. The 9.5 percent thick airfoil ASM-LRN-010, the 7.9 percent thick airfoil ASM-LRN-012, the 10.4 percent thick airfoil ASM-LRN-015, and the 8.2 percent thick airfoil ASM-LRN-017 were designed for high lift-to-drag ratios using Drela's design and analysis.

Pfenninger, Werner↗

LEBU drag reduction in high Reynolds number boundary layers

Conventional and inverted, outer-layer leading-edge breakup devices (LEBUs) were water tunnel tested on an axisymmetric body over the Re number range from 380,000 to 3.8 million. Test results indicate a sharp degradation of the LEBUs' drag-reduction mechanism with increasing Re number. The most likely result of this degradation is a decoupling of the inner and outer scales at higher Re numbers; due to this decoupling, the breakup of the large structures by outer-layer devices has minimal influence on the near-wall, shear-producing scales. This suggests that smaller devices, closer to the walls, may be required for operation at elevated Re numbers.

Anders, J. B.↗

Toward lower drag with laminar flow technology

The most promising method of achieving significantly lower skin-friction drag of an aircraft component is through the stabilization and maintenance of a laminar boundary layer over a large fraction of its surface. In a number of applications, however, laminar flow is unfeasible and/or undesirable, and the most efficient turbulent flow design must be provided. The development of both laminar and turbulent airfoil and wing designs over the past decade is reviewed. High, medium, and low-speed airfoil concepts are discussed, and some overall comparisons are made for different Reynolds number ranges.

Harvey, W. D.↗

Sound power spectrum and wave drag of a propeller in flight

Theory is presented for the sound power and sound power spectrum of a single rotation propeller in forward flight. Calculations are based on the linear wave equation with sources distributed over helicoidal surfaces to represent effects of blade thickness and steady loading. Sound power is distributed continuously over frequecy, as would be expected from Doppler effects, rather than in discrete harmonics. The theory is applied to study effects of sweep and Mach number in propfans. An acoustic efficiency is defined as the ratio of radiated sound power to shaft input power. This value is the linear estimate of the effect of wave drag due to the supersonic blade section speeds. It is shown that the acoustic efficiency is somewhat less than 1 percent for a well designed propfan.

Hanson, D. B.↗

Subsonic sting interference on the drag of a family of slanted-base ogive-cylinders

Support interference free drag measurements on a range of slanted-base ogive-cylinders are made using the NASA Langley 13 inch Magnetic Suspension and Balance System. Comparison is made to measurements with a dummy sting support. Significant support interferences are found at most test conditions. Further comparison is made between interference free base pressures, obtained using remote telemetry, and sting cavity pressures.

Britcher, Colin P.↗

Reducing Aerodynamic Drag Of Bluff Bodies

New method found to reduce aerodynamic drag of noncircular bluff bodies like road-transport vehicles. Consists of installation of thin, flat panels on forward side of body, facing airstream. Produces streamlining effect over body. Width of wake reduced, and vortex shedding is greatly suppressed.

Taylor, Lawrence W., Jr.↗

Predictions Of Drag In Viscous Transonic Flow

NASA technical memorandum summarizes results of computations of viscous, transonic flow reported at Viscous Transonic Airfoil Workshop. Results reexamined and analyzed with special emphasis on drag. Compared with each other and with data from experiments. Test cases include attached and separated transonic flows about NACA 0012 airfoil.

Holst, Terry L.↗

Mechanisms leading to net drag reduction in manipulated turbulent boundary layers

Turbulent boundary layers have been manipulated successfully using passive devices called BLADES (boundary-layer alteration devices) leading to net drag reduction. Measurements of various turbulence quantities including intermittency have led to the identification of some of the mechanisms involved in skin-friction reduction. Velocity and vorticity fluctuations associated with oncoming large scales are inhibited significantly by the manipulator blades and the vorticity shed in their wake. The manipulated boundary layers exhibit a reduced intermittency in the outer part of the layer. The effects of manipulation relax with downstream distance and the boundary layer returns toward normal conditions after 100 or 150 boundary-layer thicknesses.

Guezennec, Y. G.↗

Atmospheric drag perturbations on the Mars Observer Orbiter

The nominal launch date of the Mars Observer spacecraft is 09 - 16 - 02, with Mars encounter on 08 - 19 - 93 and the mapping orbit established on 12 - 06 - 93. Because this orbit is nearly circular at low altitude (361 km), both gravity and atmospheric drag will dominate the orbital evolution and are also the major error sources. This paper provides: (1) a summary of atmospheric density and errors for the Mars Observer orbit and time frame, (2) an assessment of spacecraft-position errors using current density estimates, and (3) an estimate of atmospheric density modeling improvement directly from the Doppler data acquired during flight operations. With an improved gravity field model, reconstructed spacecraft-position errors are at the level of 0.5 km (1sigma). However, when predicting the spacecraft's position over 14 days, the density error (at the 90-percent confidence level) dominates, yielding a down-track error of almost 70 km. By modeling the mean atmospheric density, this error can be reduced by at least a factor of two.

Esposito, P. B.↗

Crescent Wing Planforms Reduce Lift-Dependent Drag

New understanding of optimization of design of wing to minimize induced drag developed by use of computational methods that account properly for nonlinear effects of deflected wake, nonplanar shape of wing, and vortex rollup. Crescent planforms are lunate shapes like some found in nature, similar to certain bird wings and fish fins. Theoretical and experimental analyses reveals superior aerodynamic efficiency and improved high-angle-of-attack characteristics.

Holmes, Bruce J.↗

Reducing Water/Hull Drag By Injecting Air Into Grooves

Proposed technique for reduction of friction drag on hydrodynamic body involves use of grooves and combinations of surfactants to control motion of layer on surface of such body. Surface contains many rows of side-by-side, evenly spaced, longitudinal grooves. Dimensions of grooves and sharpnesses of tips in specific case depends on conditions of flow about vessel. Requires much less air than does microbubble-injection method.

Reed, Jason C.↗

Parametric Study of Afterbody/nozzle Drag on Twin Two-dimensional Convergent-divergent Nozzles at Mach Numbers from 0.60 to 1.20

An investigation has been conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of upper and lower external nozzle flap geometry on the external afterbody/nozzle drag of nonaxisymmetric two-dimensional convergent-divergent exhaust nozzles having parallel external sidewalls installed on a generic twin-engine, fighter-aircraft model. Tests were conducted over a Mach number range from 0.60 to 1.20 and over an angle-of-attack range from -5 to 9 deg. Nozzle pressure ratio was varied from jet off (1.0) to approximately 10.0, depending on Mach number.

Pendergraft, Odis C., Jr.↗

Personnel launch system (PLS) lifting body and low lift-to-drag (L/D)

The Personnel Launch System (PLS) is a small transportation system designed to transport people, but no cargo, to and from low-earth orbit. The PLS is being considered as an addition to the manned launch capability of the United States for three main reasons: (1) to assure manned access to space, (2) to achieve a first-stage abort ability, and (3) to reduce operations costs. To those ends, two designs are being considered for the PLS that differ in their lift-to-drag (L/D) ratio. The Lyndon B. Johnson Space Center was assigned the task of examining low L/D capsules with no wings and a parachute landing capability. The Langley Research Center is studying a higher L/D PLS with wings and runway landings. Whichever design is selected, the PLS will act as a complement to the Space Shuttle fleet and will enhance the ability of our Nation to achieve reliable, safe, and cost-effective access to space flight, thus furthering the goals of the U.S. space program and increasing the safety of the human crews manning a future space station.

Erwin, Harry O.↗

Viscous drag reduction via surface mass injection

Slot injection systems on the surfaces of aerodynamic bodies have been noted to consistently furnish substantial local skin friction reductions which are predictable on the basis of current numerical methods. Only crude systems studies, however, have been thus far completed. The most common configuration for slot ingestion in the literature involves tangential injection of air along a two-dimensional surface on which air constitutes the mainstream flow; attention is presently given to slot injection in low-speed and high-speed flows, as well as a discussion of aircraft applications and an evaluation of prospective possibilities for practical drag-reduction systems.

Hefner, Jerry N.↗

Enhancements to the high speed convective heating and viscous drag prediction techniques of the Aerodynamic Preliminary Analysis System (APAS)

APAS is an interactive computer program that allows a user to quickly estimate the aerodynamic characteristics of aerospace and aeronautical vehicles throughout the speed range using a single geometry definition. This report documents the major differences between the high speed analysis portion of the APAS and the Mark III version of the hypersonic arbitrary-body program from which it has evolved and compares convective heating and viscous drag results from the APAS with CFD results, experimental data, and flight data.

Cruz, Christopher I.↗

Effect of lift-to-drag ratio upon pilot rating for a preliminary version of the HL-20 lifting body

A man-in-the-loop simulation study of the handling qualities of the HL-20 lifting body vehicle has been performed in a fixed-base simulation cockpit. The study was aimed at identifying opportunities to improve the original design of the vehicle from a handling qualities and landing performance perspective. A subsonic aerodynamic model of the HL-20 was used as a baseline, and visual approaches and landings were made at various vehicle lift-to-drag (L/D) ratios. It is concluded that there is a high degree of correlation between maximum L/D ratio and pilot rating. Using the pilot ratings Level 1, flying qualities were found to be possible for configurations with a maximum L/D ratio of 3.8 or higher.

Jackson, E. B.↗