Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Collision Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Simulation of collisional fragmentation with explosives

For practical reasons, experimental studies of collisional fragmentation must at times rely on explosives to fragment a target body. For example, Housen et al., described experiments in which spheres were fragmented in a pressurized atmosphere. Explosives were used because impacts could not be performed in the pressure chamber. Explosives can also be used to study targets much larger than those which can be disrupted by conventional light-gas guns, thereby allowing size- and rate-effects to be investigated. The purpose of this study is to determine the charge burial depth required to simulate various aspects of collisions.

Housen, Kevin↗

Use of SPOT and ERS-1 SAR data to study the tectonic and climatic history of arid regions

In order to separate the effects of the different tectonic and climatic processes on the shapes of desert piedmonts, a modified conic equation was fitted to digital topographic data for individual alluvial fans in Death Valley (California, U.S.). The topographic data were obtained from a SPOT panchromatic stereo pair and from the airborne interferometric SAR (Synthetic Aperture Radar) (TOPSAR). The conic fit allows parameters for the epex position, slope, and radial curvature to be compared with unit age, uplift rate, and climatic conditions. Preliminary results indicate that slope flattens with age and radial curvature is concave up, but decreases with age. Work is continuing on correlation of fit residuals and apex position with fan unit age. This information will help in the determination of tectonic uplift rates and the climatic history of the western U.S. ERS-1 SAR images were used to study an area of western China where a large strike slip fault crosses a series of alluvial fans and stream valleys. Previous analysis of SPOT panchromatic images of the area shows that offsets fans and streams can be recognized. Measurement of the rate of motion of this fault will help in the overall model of deformation of the Asian tectonic plate in response to the collision of the Indian plate.

Farr, Tom G.↗

Unbiased Ratio Estimator for k-Eigenvalue in Monte Carlo Criticality Calculations

In criticality calculations, the effective multiplication factor (k{sub eff}) is an important parameter for reactor analysis. It can be interpreted as the ratio of the neutron production rate to the loss rate in a reactor core. In Monte Carlo (MC) criticality calculations, k{sub eff} is obtained for each active cycle i as: k-i = P{sub i}/L{sub i} for I = 1 to I where P{sub i} and L{sub i} are the production rate and the loss rate at cycle i, respectively, and they are normalized by the nominal source size for cycle. Since all neutron particles in a cycle will be absorbed or leaks out at the end, the loss rate, L{sub i}, can be set as the source rate, which is the unity. Thus, in MCNP5, k{sub i} is simply calculated with P{sub i} by using three conventional estimators; collision, absorption, and track-length estimators. In domain decomposed MC criticality calculations based on the fission and surface source (FSS) iteration method, k{sub i} is calculated by a ratio of P{sub i} and L{sub i}, where both P{sub i} and L{sub i} are random variables, sampled by using the same particle histories. When the numerator and the denominator are correlated, the variance of the ratio can be smaller than that of the numerator. Then, the final estimate of k{sub eff} is provided as the sample mean of k{sub i}, which will be referred as 'simple' ratio estimator in this paper. In Ref., it is shown that this ratio estimator converges faster and fluctuates less than the conventional estimator. A similar ratio estimator is also used in Serpent 2, as an implicit estimate of k{sub eff}. However, this type of 'simple' ratio estimator is biased, which means that the expectation of the ratio is different from the ratio of the expectation of the numerator and that of the denominator. In this paper, an unbiased ratio estimator which was originally derived in the cytometry analysis is introduced to estimate k{sub eff} and is tested on a continuous-energy UO{sub 2} pin-cell problem. In this test problem, it is shown that the variance of the unbiased ratio estimator is smaller than those of the conventional estimators provided by MCNP5, while the simple ratio estimator can be significantly biased when the number of histories per cycle is too small. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Stellar Winds and Dust Avalanches in the AU Mic Debris Disk

We explain the fast-moving, ripple-like features in the edge-on debris disk orbiting the young M dwarf AU Mic. The bright features are clouds of submicron dust repelled by the host star’s wind. The clouds are produced by avalanches: radial outflows of dust that gain exponentially more mass as they shatter background disk particles in collisional chain reactions. The avalanches are triggered from a region a few au across—the “avalanche zone”—located on AU Mic’s primary “birth” ring at a true distance of ∼35 au from the star but at a projected distance more than a factor of 10 smaller: the avalanche zone sits directly along the line of sight to the star, on the side of the ring nearest Earth, launching clouds that disk rotation sends wholly to the southeast, as observed. The avalanche zone marks where the primary ring intersects a secondary ring of debris left by the catastrophic disruption of a progenitor up to Varuna in size, less than tens of thousands of years ago. Only where the rings intersect are particle collisions sufficiently violent to spawn the submicron dust needed to seed the avalanches. We show that this picture works quantitatively, reproducing the masses, sizes, and velocities of the observed escaping clouds. The Lorentz force exerted by the wind’s magnetic field, whose polarity reverses periodically according to the stellar magnetic cycle, promises to explain the observed vertical undulations. The timescale between avalanches, about 10 yr, might be set by time variability of the wind mass loss rate or, more speculatively, by some self-regulating limit cycle.

79 ASTRONOMY AND ASTROPHYSICS↗

A Solar-Pumped Fluorescence Model for Line-By-Line Emission Intensities in the B-X, A-X, and X-X Band Systems of 12C14N

We present a new quantitative model for detailed solar-pumped fluorescent emission of the main isotopologue of CN. The derived fluorescence efficiencies permit estimation and interpretation of ro-vibrational infrared line intensities of CN in exospheres exposed to solar (or stellar) radiation. Our g-factors are applicable to astronomical observations of CN extending from infrared to optical wavelengths, and we compare them with previous calculations in the literature. The new model enables extraction of rotational temperature, column abundance, and production rate from astronomical observations of CN in the inner coma of comets. Our model accounts for excitation and de-excitation of rotational levels in the ground vibrational state by collisions, solar excitation to the A(sup 2)Pi(sub I) and B(sup 2)Sum(sup +) electronically excited states followed by cascade to ro-vibrational levels of X(sup 2)Sum(sup +), and direct solar infrared pumping of ro-vibrational levels in the X(sup 2)Sum(sup +) state. The model uses advanced solar spectra acquired at high spectral resolution at the relevant infrared and optical wavelengths and considers the heliocentric radial velocity of the comet (the Swings effect) when assessing the exciting solar flux for a given transition. We present model predictions for the variation of fluorescence rates with rotational temperature and heliocentric radial velocity. Furthermore, we test our fluorescence model by comparing predicted and measured line-by-line intensities for X(sup 2)Sum(sup +) (1-0) in comet C/2014 Q2 (Lovejoy), thereby identifying multiple emission lines observed at IR wavelengths.

Emission↗

Comparison of heavy-ion transport simulations: Collision integral with pions and Δ resonances in a box

Simulations by transport codes are indispensable for extracting valuable physical information from heavy-ion collisions. Pion observables such as the π - /π + yield ratio are expected to be sensitive to the symmetry energy at high densities. To evaluate, understand, and reduce the uncertainties in transport-code results originating from different approximations in handling the production of Δ resonances and pions. We compare ten transport codes under controlled conditions for a system confined in a box, with periodic boundary conditions, and initialized with nucleons at saturation density and at a temperature of 60 MeV. The reactions NN↔NΔ and Δ↔Nπ are implemented, but the Pauli blocking and the mean-field potential are deactivated in the present comparison. Thus, these are cascade calculations including pions and Δ resonances. Results are compared to those from the two reference cases of a chemically equilibrated ideal gas mixture and of the rate equation. For the numbers of Δ and π, deviations from the reference values are observed in many codes, and they depend significantly on the size of the time step. These deviations are tied to different ways in ordering the sequence of reactions, such as collisions and decays, that take place in the same time step. Better agreements with the reference values are seen in the reaction rates and the number ratios among the isospin species of Δ and π. Both the reaction rates and the number ratios are, however, affected by the correlations between particle positions, which are absent in the Boltzmann equation, but are induced by the way particle scatterings are treated in many of the transport calculations. The uncertainty in the transport-code predictions of the π - /π + ratio, after letting the existing Δ resonances decay, is found to be within a few percent for the system initialized at n/p=1.5. In conclusion, the uncertainty in the final π - /π + ratio in this simplified case of particles in a box is sufficiently small so that it does not strongly impact constraining the high-density symmetry energy from heavy-ion collisions. Most of the sources of uncertainties have been understood, and individual codes may be further improved in future applications. This investigation will be extended in the future to heavy-ion collisions to ensure the problems identified here remain under control.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rotational excitation and de-excitation of magnesium mono-sulphide (MgS) by He collisions

ABSTRACT Magnesium mono-sulphide (MgS) plays a crucial role in astrochemical processes, particularly in the interstellar medium (ISM), where metal-sulphur chemistry influences molecular formation and evolution. This work presents a detailed study of the rotational excitation and de-excitation of MgS through collisions with helium (He) atoms, the second most abundant species in the ISM after hydrogen, which includes both atomic (H) and molecular forms (H2). The focus on MgS–He collisions arises from He's high abundance, chemical inertness, and simpler electronic structure, which make it well suited for quantum scattering calculations. These characteristics establish He as an ideal candidate for initial studies, providing fundamental data for future investigations involving H2. The study uses quantum scattering methods to calculate the collisional rate coefficients over a broad temperature range. These rates are critical for interpreting observational data on MgS and predicting its abundance in space. The interaction potential between MgS and He is calculated using the rigid rotor approximation and the Jacobi coordinate system, employing the CCSD(T)-F12a/aug-cc-pVTZ method for accurate two-dimensional potential energy surface. The study explores the anisotropic nature of the MgS–He interaction, which favours odd Δj rotational transitions at low collision energies. The inelastic cross-sections for rotational transitions involving up to 16 rotational levels of MgS were computed up to 1000 cm−1, enabling the calculation of rate coefficients up to 150 K for Δj = ±1, ±2, and ± 3 rotational transitions. The results show that Δj = 1 transitions dominate at low temperatures, while Δj = 2 transitions become more significant at higher temperatures. This study provides valuable data for interpreting future astrophysical observations of MgS. The findings also propose new rotational transitions for MgS detection in space, enhancing our ability to track and study this molecule in various cosmic environments.

Hendaoui, Hamza (ORCID:0000000218641872)↗

Modeling of inelastic collisions in a multifluid plasma: Ionization and recombination

A model for ionization and recombination collisions in a multifluid plasma is formulated using the framework introduced in previous work [H. P. Le and J.-L. Cambier, Phys. Plasmas 22, 093512 (2015)]. The exchange source terms for density, momentum, and energy are detailed for the case of electron induced ionization and three body recombination collisions with isotropic scattering. The principle of detailed balance is enforced at the microscopic level. We describe how to incorporate the standard collisional-radiative model into the multifluid equations using the current formulation. Numerical solutions of the collisional-radiative rate equations for atomic hydrogen are presented to highlight the impact of the multifluid effect on the kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dosimetric comparison of two arc-based stereotactic body radiotherapy techniques for early-stage lung cancer

To compare the dosimetric and delivery characteristics of two arc-based stereotactic body radiotherapy (SBRT) techniques for early-stage lung cancer treatment. SBRT treatment plans for lung tumors of different sizes and locations were designed using a single-isocenter multisegment dynamic conformal arc technique (SiMs-arc) and a volumetric modulated arc therapy technique (RapidArc) for 5 representative patients treated previously with lung SBRT. The SiMs-arc plans were generated with the isocenter located in the geometric center of patient's axial plane (which allows for collision-free gantry rotation around the patient) and 6 contiguous 60° arc segments spanning from 1° to 359°. 2 RapidArc plans, one using the same arc geometry as the SiMs-arc and the other using typical partial arcs (210°) with the isocenter inside planning target volume (PTV), were generated for each corresponding SiMs-arc plan. All plans were generated using the Varian Eclipse treatment planning system (V10.0) and were normalized with PTV V{sub 100} to 95%. PTV coverage, dose to organs at risk, and total monitor units (MUs) were then compared and analyzed. For PTV coverage, the RapidArc plans generally produced higher PTV D{sub 99} (by 1.0% to 3.3%) and higher minimum dose (by 2.7% to 12.7%), better PTV conformality index (by 1% to 8%), and less volume of 50% dose outside 2 cm from PTV (by 0 to 20.8 cm{sup 3}) than the corresponding SiMs-arc plans. For normal tissues, no significant dose differences were observed for the lungs, trachea, chest wall, and heart; RapidArc using partial arcs produced lowest maximum dose to spinal cord. For dose delivery, the RapidArc plans typically required 50% to 90% more MUs than SiMs-arc plans to deliver the same prescribed dose. The additional intensity modulation afforded by variable gantry speed and dose rate and by overlapping arcs enabled RapidArc plans to produce dosimetrically improved plans for lung SBRT, but required more MUs (by a factor > 1.5) to deliver. The dosimetric improvements, most notably in PTV minimum dose and in dose conformality for irregularly shaped PTVs, may outweigh the increased MUs in using RapidArc. For small and peripherally located tumors, SiMs-arc produces comparable dosimetric quality and could be more efficient in both treatment planning and dose delivery.

61 RADIATION PROTECTION AND DOSIMETRY↗

Challenges in Kinetic modeling of ammonia pyrolysis

Ammonia pyrolysis reactions have implications for its ignition and oxidation in engines and gas turbines. In the present work, the chemistry of ammonia pyrolysis is investigated by kinetic modeling and theory. Rate constants for key reactions are carefully evaluated based on available experimental and theoretical results. The high pressure limit k1,∞ for NH 2 + H (+M) ⇄ NH 3 (+M) (R1) is calculated to be essentially the collision frequency, indicating that dissociation of ammonia in combustion processes will be at or close to the low pressure limit even at engine and gas turbine conditions. The chemical kinetic model is validated against reported shock tube measurements of NH 3 , NH 2 , and NH in ammonia pyrolysis. Predictions are in good agreement with observations for dilute conditions (≤ 0.5% NH 3 ), but the model appears to underpredict the NH 3 consumption rate at longer times in less dilute mixtures. At short reaction times, thermal dissociation of NH3, together with the NH 3 + H reaction, controls conversion. At longer times, secondary reactions involving NH 2 and NH become important due to their impact on the radical pool. Predictions become sensitive to formation and consumption of diazene (tHNNH and cHNNH). Several of the key steps in the ammonia pyrolysis mechanism are radical-radical reactions that are difficult to measure accurately and challenging to calculate theoretically, and a more comprehensive experimental characterization is desirable to support further model development.

10 SYNTHETIC FUELS↗

Temperature relaxation in a magnetized plasma

A magnetic field greatly affects the relaxation phenomena in a plasma when the particles’ thermal gyro-radii are smaller than the Debye length. Its influence on the temperature relaxation (TR) is investigated through consideration of binary collisions between charged particles in the presence of a uniform magnetic field within a perturbation theory. The relaxation times are calculated. It is shown that the electron-electron (e-e) and ion-ion (i-i) TR rates first increase and then decrease as the magnetic field grows, and the doubly logarithmic term contained in the electron-ion (e-i) TR rate results from the exchange between the electron parallel and the ion perpendicular kinetic energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transits of the QCD critical point

In this work, we analyze the evolution of hydrodynamic fluctuations in a heavy-ion collision as the system passes close to the QCD critical point.We introduce two small dimensionless parameters λ and Δ s to characterize the evolution. λ compares the microscopic relaxation time (away from the critical point) to the expansion rate $λ ≡ τ_0/τ_Q$, and Δ s compares the baryon to entropy ratio, n/s, to its critical value, $Δ_s ≡ (n/s – n_c/s_c)/(n_c/s_c)$. We determine how the evolution of critical hydrodynamic fluctuations depends parametrically on λ and Δ s . Finally, we use this parametric reasoning to estimate the critical fluctuations and correlation length for a heavy-ion collision and to give guidance to the experimental search for the QCD critical point.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transition from collisional to kinetic regimes in large-scale reconnection layers

Using fully kinetic simulations with a Fokker-Planck collision operator, it is demonstrated that Sweet-Parker reconnection layers are unstable to plasmoids (secondary islands) for Lundquist numbers beyond S > or approx. 1000. The instability is increasingly violent at higher Lundquist numbers, both in terms of the number of plasmoids produced and the super-Alfvenic growth rate. A dramatic enhancement in the reconnection rate is observed when the half-thickness of the current sheet between two plasmoids approaches the ion inertial length. During this transition to kinetic scales, the reconnection electric field rapidly exceeds the runaway limit, resulting in the formation of electron-scale current layers that are unstable to the continual formation of new plasmoids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dust charging and charge fluctuations in a weakly collisional radio-frequency sheath at low pressure

Models for the charging of dust particles in the bulk plasma and in the sheath region are discussed. A new model is proposed that describes collision-enhanced ion currents in the sheath. The collisions result in a substantial reduction of the negative charge of the dust. Experimental data for the dust charge in the sheath can be described by this model when a Bi-Maxwellian electron distribution is taken into account. Expressions for the dust charging rate for all considered models are presented and their influence on the rise of the kinetic dust temperature is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tracking control of colloidal particles through non-homogeneous stationary flows

We consider the problem of controlling the trajectory of a single colloidal particle in a fluid with steady non-homogeneous flow. We use a Langevin equation to describe the dynamics of this particle, where the friction term is assumed to be given by the Faxén's Theorem for the force on a sphere immersed in a stationary flow. We use this description to propose an explicit control force field to be applied on the particle such that it will follow asymptotically any given desired trajectory, starting from an arbitrary initial condition. We show that the dynamics of the controlled particle can be mapped into a set of stochastic harmonic oscillators and that the velocity gradient of the solvent induces an asymmetric coupling between them. We study the particular case of a Brownian particle controlled through a plane Couette flow and show explicitly that the velocity gradient of the solvent renders the dynamics non-stationary and non-reversible in time. We quantify this effect in terms of the correlation functions for the position of the controlled particle, which turn out to exhibit contributions depending exclusively on the non-equilibrium character of the state of the solvent. In order to test the validity of our model, we perform simulations of the controlled particle moving in a simple shear flow, using a hybrid method combining molecular dynamics and multi-particle collision dynamics. We confirm numerically that the proposed guiding force allows for controlling the trajectory of the micro-sized particle by obligating it to follow diverse specific trajectories in fluids with homogeneous shear rates of different strengths. In addition, we find that the non-equilibrium correlation functions in simulations exhibit the same qualitative behavior predicted by the model, thus revealing the presence of the asymmetric non-equilibrium coupling mechanism induced by the velocity gradient.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Runaway electron dynamics in tokamak plasmas with high impurity content

The dynamics of high energy runaway electrons is analyzed for plasmas with high impurity content. It is shown that modified collision terms are required in order to account for the collisions of the relativistic runaway electrons with partially stripped impurity ions, including the effect of the collisions with free and bound electrons, as well as the scattering by the full nuclear and the electron-shielded ion charge. The effect of the impurities on the avalanche runaway growth rate is discussed. The results are applied, for illustration, to the interpretation of the runaway electron behavior during disruptions, where large amounts of impurities are expected, particularly during disruption mitigation by massive gas injection. The consequences for the electron synchrotron radiation losses and the resulting runaway electron dynamics are also analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rate Constant and RRKM Product Study for the Reaction Between CH3 and C2H3 at T = 298K

The total rate constant k1 has been determined at P = 1 Torr nominal pressure (He) and at T = 298 K for the vinyl-methyl cross-radical reaction CH3 + C2H3 yields products. The measurements were performed in a discharge flow system coupled with collision-free sampling to a mass spectrometer operated at low electron energies. Vinyl and methyl radicals were generated by the reactions of F with C2H4 and CH4, respectively. The kinetic studies were performed by monitoring the decay of C2H3 with methyl in excess, 6 < |CH3|(sub 0)/|C2H3|(sub 0) < 21. The overall rate coefficient was determined to be k1(298 K) = (1.02 +/- 0.53)x10(exp -10) cubic cm/molecule/s with the quoted uncertainty representing total errors. Numerical modeling was required to correct for secondary vinyl consumption by reactions such as C2H3 + H and C2H3 + C2H3. The present result for k1 at T = 298 K is compared to two previous studies at high pressure (100-300 Torr He) and to a very recent study at low pressure (0.9-3.7 Torr He). Comparison is also made with the rate constant for the similar reaction CH3 + C2H5 and with a value for k1 estimated by the geometric mean rule employing values for k(CH3 + CH3) and k(C2H3 + C2H3). Qualitative product studies at T = 298 K and 200 K indicated formation of C3H6, C2H2, and C2H5 as products of the combination-stabilization, disproportionation, and combination-decomposition channels, respectively, of the CH3 + C2H3 reaction. We also observed the secondary C4H8 product of the subsequent reaction of C3H5 with excess CH3; this observation provides convincing evidence for the combination-decomposition channel yielding C3H5 + H. RRKM calculations with helium as the deactivator support the present and very recent experimental observations that allylic C-H bond rupture is an important path in the combination reaction. The pressure and temperature dependencies of the branching fractions are also predicted.

Thorn, R. Peyton, Jr.↗

A STUDY OF ALFVÉN WAVE PROPAGATION AND HEATING THE CHROMOSPHERE

Alfvén wave propagation, reflection, and heating of the chromosphere are studied for a one-dimensional solar atmosphere by self-consistently solving plasma, neutral fluid, and Maxwell's equations with incorporation of the Hall effect and strong electron-neutral, electron-ion, and ion-neutral collisions. We have developed a numerical model based on an implicit backward difference formula of second-order accuracy both in time and space to solve stiff governing equations resulting from strong inter-species collisions. A non-reflecting boundary condition is applied to the top boundary so that the wave reflection within the simulation domain can be unambiguously determined. It is shown that due to the density gradient the Alfvén waves are partially reflected throughout the chromosphere and more strongly at higher altitudes with the strongest reflection at the transition region. The waves are damped in the lower chromosphere dominantly through Joule dissipation, producing heating strong enough to balance the radiative loss for the quiet chromosphere without invoking anomalous processes or turbulences. The heating rates are larger for weaker background magnetic fields below ∼500 km with higher-frequency waves subject to heavier damping. There is an upper cutoff frequency, depending on the background magnetic field, above which the waves are completely damped. At the frequencies below which the waves are not strongly damped, the interaction of reflected waves with the upward propagating waves produces power at their double frequencies, which leads to more damping. The wave energy flux transmitted to the corona is one order of magnitude smaller than that of the driving source.

79 ASTRONOMY AND ASTROPHYSICS↗