Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Statistical Study of Primary Knock-on Atoms under Neutron Irradiation in RMC Code

Materials in high flux neutron condition will suffer from an evolution of damage which ultimately restricts the lifetime of the fuel clad and reactor pressure vessel. Atoms in irradiated material transform to primary knock-on atoms (PKAs) by absorbing the kinetic energy transferred from neutrons, and the energy released from nuclear reactions. The secondary collision cascades which are induced by PKAs create point defects within the material, with residual vacancies and interstitials eventually causing swelling and embrittlement that degrades mechanical behavior. For a long time, Displacements per Atom (DPA) index has been identified as a measure of radiation damage in material. Nowadays, several advanced methods, such as Molecular Dynamics (MD) and Kinetic Monte Carlo (KMC) simulations, have been developed for more accurately simulating the evolution of the damage. However, all of these techniques need more comprehensive information of PKA, such as the type, energy, direction and spatial distribution. The limitations of DPA emerge and a method should be provided to simulate the generative process of PKAs. Recently, a deterministic analysis code SPECTRA-PKA has been developed by Gilbert to calculate the energy spectra of almost all types PKAs by solving the group-to-group cross-section matrices equation which includes neutron scattering, light charged particles, and recoils of the residual nuclei. But this deterministic analysis code could not give the direction, spatial and time distribution of PKAs. Based on the Geant4 program, Cui Zhenguo has simulated the irradiation by neutrons with 1 MeV energy in zirconium, while only the two adjacent elastic collisions between injected neutron and target atoms are taken into consideration. In this paper, Monte Carlo method to calculate PKAs information during neutron transport in RMC code is introduced. RMC is a continuous-energy Reactor Monte Carlo neutron and photon transport code being developed by Department of Engineering Physics at Tsinghua University, Beijing. PKAs in zirconium are calculated in fixed neutron source mode. Statistical information of PKAs in PWR fuel cell and SFR fuel cell is shown and compared. The results show that Monte Carlo method can provide more comprehensive information of PKAs. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

The Effects of Different Lattice Codes on Results of Sensitivity and Uncertainty Analysis

According to the UAM ('Uncertainty Analysis in Modeling') benchmark, uncertainties in the LWR system calculations at all stages should be determined and quantified. As the neutronics calculations are prerequisite for the predictions of the reactor system, and the uncertainties introduced by the neutronics calculations would be propagated to the subsequent calculations, hence uncertainty analysis has been firstly focused on the neutronics phase to quantify the uncertainties of the reactor-physics predictions in UAM. For the lattice physics, the objective of uncertainty analysis is focused on uncertainty quantifications of the few-group constants; for the core physics, uncertainties of the core steady-state stand-alone neutronics calculations are focused on. Based on the previous researches, the nuclear-data uncertainty has been treated as one of the most significant source of uncertainty and received the most focus. In the previous works, the domestic code UNICORN has the capability of performing sensitivity analysis and uncertainty analysis using the direct numerical perturbation (DNP) method and statistical sampling (SS) method. In this paper, the capability of the UNICORN code has been improved. The domestic lattice code NECP-CACTI has been added in UNICORN to perform the lattice calculations, with DRAGON5.0 and NECP-CACTI available for lattice calculations. For DRAGON5.0 and NECP-CACTI, all the methods and technologies are shared in UNICORN. Therefore, the effects of different lattice codes on the results of sensitivity and uncertainty analysis have been researched and determined in this paper. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Parallel Performance of the Time Dependent Transport Code TDKENO with Applications to TREAT Simulations

Renewed interest in high fidelity simulation of excursion events has prompted the improvement of codes that solve the time-dependent Boltzmann transport equation. Often these codes make approximations to the transport equation in order to achieve results in a reasonable amount of time. One method, the improved quasi-static (IQS), makes few approximations compared to adiabatic, diffusion, and point kinetics. This is the methodology employed by the code TDKENO. One downside to this approach is a portion of the calculation (flux shape) is done with a Monte Carlo code and must be called upon several times. To minimize run time the flux shape calculation is solved with a modified version of KENO-VI from Scale 6.2. This version of KENO runs in parallel across hundreds of nodes, thus improving performance. The parallel capabilities of KENO allows TDKENO to simulate complex transient experiments with a large number of histories. These improvements are applied to the simulation of TREAT calibration experiments. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2017

Simulation of the RPI Reactor Critical Facility Core Using High-Fidelity Neutronics Code PROTEUS

The PROTEUS code is a high-fidelity three-dimensional (3D) deterministic neutron transport code developed by ANL under the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The code contains the SN2ND (second order discrete ordinates method) and two MOC transport solvers, MOCFE and MOCEX (first order methods of characteristics), based on unstructured finite element meshes which allow users to model complex or unconventional geometry reactor problems. Among the two MOC solvers which normally perform better than SN for heterogeneous geometry problems, MOCEX is based on a rigorous formulation using the two-dimensional (2D) MOC radially and the discontinuous Galerkin finite element method axially to overcome the drawbacks of MOCFE with the full 3D MOC representation which requires enormous memory and computational efforts. The Reactor Critical Facility (RCF), an open tank research reactor at the Rensselaer Polytechnic Institute (RPI), became operational in 1956 under the American Locomotive company and has been operating using low-enriched uranium fuel pins, which makes it the only university research facility to use fuel rods similar to operating commercial light water reactors (LWRs). This paper presents modeling and simulation results of the RCF using PROTEUS for code verification and validation which also supports an ongoing NEUP project in which a set of benchmark validation experiments for multiphysics coupling is being developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Extension of the DIF3D Code for Molten Salt Reactor Analysis

The molten salt reactor (MSR) with the fuel dissolved into the liquid salt has been selected as one of the six Generation-IV reactors due to its excellent characteristics in the aspects of sustainability, economy, passive safety, and resource utilization. In a MSR, the fuel salt is circulated throughout the whole system and thus some of delayed neutron precursors generated in the core decay in position of low importance or even out of the core. As a result, the multiplication factor (k-eff) of MSR is smaller than that of a reactor of stationary fuel when all the other conditions are same. Therefore, the neutronics code developed for stationary fuel cannot be applied directly to MSR analysis. In this paper, we describe the extension and application of the DIF3D code to MSR neutronics analysis. The DIF3D code system is a multi-group steady-state neutron diffusion and transport theory solver. It provides three flux solution options: finite-difference diffusion theory, nodal diffusion theory, and variational nodal transport theory methods. Eigenvalue, adjoint, fixed source and criticality (concentration) search problems are permitted. The DIF3D code has recently been modified to model the flowing fuel. To verify the new capability of DIF3D, the MSFR [4] core was analyzed with a wide range of velocity field of fuel salt and time spent outside of the core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Verification of AZTRAN v1.2 code with a PWR-MOX benchmark problem

The AZTLAN platform project is an effort focused on developing a modeling Mexican platform to design and analyze nuclear reactors. It is a national initiative lead by the National Institute of Nuclear Research (ININ), in collaboration with the main Mexico's public universities: the National Polytechnic Institute (IPN), the National Autonomous University of Mexico (UNAM) and the Autonomous Metropolitan University (UAM). The AZTRAN code is a module of AZTLAN that solves the 3D neutron transport equation using the discrete ordinates (SN) method and the nodal scheme RTN-0 on steady state and Cartesian geometry. AZTRAN works with cross sections generated externally by other code. It provides a solution to the eigenvalue problem and determine the neutron distribution for a specific medium at desired conditions. On the other hand, it is important to mention that the Working Group 4 (users group) of AZTLAN platform is responsible of verify and validate the codes development, in order to give feedback to the group of developers: neutronics and thermal-hydraulics. In this work, the AZTRAN v1.2 performance was studied for a PWR-MOX lattice, using as example the Yamamoto's benchmark for LWR fuels, comparing AZTRAN v1.2 results again those obtained with the well-known neutronic code SERPENT-2 (v1.27), and some results from an article presented at PHYSOR-2002. Results from AZTRAN for a BWR fuel lattice is presented in a companion paper in this meeting.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2018

Testing of ENDF/B-VIII.0 in the GNDS format with LLNL transport codes - 25606

ENDF/B-VIII.0 was released in the Evaluated Nuclear Data Format and the Generalized Nuclear Data Structure format (GNDS), a new international standard for storing nuclear data developed under the auspices of the Nuclear Energy Agency Working Party on Evaluation Cooperation Subgroup 38. GNDS relies on modern coding practices, and offers a structured, flexible and physics-based standard for storing and exchanging nuclear data to address limitations in legacy nuclear data formats such as ENDF-6. GNDS supports the storage of evaluated nuclear data as well as processed data suitable for both deterministic (i.e., multi-group) and Monte Carlo transport codes. Lawrence Livermore National Laboratory has implemented a complete suite of codes to test GNDS data. Simulations for the ENDF/B-VIII.0 cross-section library in GNDS format are presented. Deterministic and Monte Carlo radiation transport simulations with the Ardra and Mercury codes respectively, are validated against reactivities in fast criticality safety benchmark assemblies. Finally, Mercury simulations of {sup 238}U(n,f), {sup 237}Np(n,f) and {sup 239}Pu(n,f) reaction rates in Godiva, Jezebel and Flattop are compared to MCNP results and measured data. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2023

Adopting occupancy-based HVAC controls in commercial building energy codes: Analysis of cost-effectiveness and decarbonization potential

Recent research has shown the energy-saving potential of occupancy-based HVAC controls (OBCs) in commercial buildings. However, building energy codes have not fully adopted this technology. This study aims to evaluate the cost-effectiveness and decarbonization benefits of OBCs and provide guidance for integrating occupancy sensors into building energy code development. To this end, a parametric simulation using EnergyPlus and a nationwide cost-effectiveness analysis are carried out considering three building types and 40 representative cities in the U.S. Here, the findings reveal that the current cost-effectiveness performance of OBCs is limited due to the high cost of occupancy sensors. However, incorporating the societal cost of carbon factor in future energy and environmental policy could greatly enhance the actual cost-effectiveness performance. Besides, a reduction in the cost of occupancy sensors to approximately 60% of the current price level could also greatly shorten the discounted payback period of OBCs. Additionally, OBCs demonstrate significant potential in building decarbonization, with potential CO 2 emissions savings of more than 5.56 million metric tons across the three building types and 40 selected cities. Finally, policy implications are provided to guide the incorporation of occupancy-based HVAC controls in future energy codes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2015

CAFE: A NEW RELATIVISTIC MHD CODE

We introduce CAFE, a new independent code designed to solve the equations of relativistic ideal magnetohydrodynamics (RMHD) in three dimensions. We present the standard tests for an RMHD code and for the relativistic hydrodynamics regime because we have not reported them before. The tests include the one-dimensional Riemann problems related to blast waves, head-on collisions of streams, and states with transverse velocities, with and without magnetic field, which is aligned or transverse, constant or discontinuous across the initial discontinuity. Among the two-dimensional (2D) and 3D tests without magnetic field, we include the 2D Riemann problem, a one-dimensional shock tube along a diagonal, the high-speed Emery wind tunnel, the Kelvin–Helmholtz (KH) instability, a set of jets, and a 3D spherical blast wave, whereas in the presence of a magnetic field we show the magnetic rotor, the cylindrical explosion, a case of Kelvin–Helmholtz instability, and a 3D magnetic field advection loop. The code uses high-resolution shock-capturing methods, and we present the error analysis for a combination that uses the Harten, Lax, van Leer, and Einfeldt (HLLE) flux formula combined with a linear, piecewise parabolic method and fifth-order weighted essentially nonoscillatory reconstructors. We use the flux-constrained transport and the divergence cleaning methods to control the divergence-free magnetic field constraint.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Alabama Residential Energy Code Field Study: Baseline Report

A research project in the state of Alabama identified opportunities to reduce homeowner utility bills in residential single-family new construction by increasing compliance with the state energy code. The study was initiated in March 2014 and continued through May 2014. During this period, research teams visited 134 homes during various stages of construction, resulting in a substantial data set based on observations made directly in the field. Analysis of the data has led to a better understanding of the energy features present in homes, and indicates nearly $1.3 million in potential savings to Alabama homeowners that could result from increased code compliance. Public and private entities within the state can use this information to justify and catalyze future investments in energy code training and related energy-efficiency programs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Data Driven Commercial Building Energy Code Compliance and Technology Inventory for New York City

Building Performance Standards (BPS) are gaining national traction. A BPS will require new processes in the design, construction, and operation of buildings that take the occupants into account and enable predictive analysis to ensure compliance with current and future GHG emissions caps. In New York City, most buildings over 25,000 square feet will be regulated by a BPS starting in 2024, regardless of whether it is new construction permitted under current energy codes or an existing building. This research is one of the first to begin the evaluation of a long-term series of building policies in the context of an open data ecosystem, in cooperation with city agencies. Existing building policies enacted in NYC have ranged from building energy benchmarking and labeling to energy audits to the regulation of GHG emission in buildings. Through the development of a dataset related to building technologies and energy consumption, this project can help to evaluate if meaningful conclusions can be drawn for the data that has been largely self-reported in compliance with city regulations. This project will also provide lessons learned from a deep dive into these types of datasets to provide best practices for municipalities or states seeking to embark on policies like those enacted in NYC. In addition, a Building Automation System (BAS) Stretch Standard of Care (SSOC) for owners, designers, and building operators will enable the measurement and predictive analysis of energy consumption and GHG emissions at the plant, system, or component level, in anticipation of regulated GHG limits on buildings based on energy use. The SSOC is expected to be suitable for use on a national level. The primary feature of an SSOC is a standardized format for a set of BAS points that can be used to control and to gather data from individual plants, systems, or components that are related to building energy consumption. This project examined how measurements compare to prescriptive or simulation-based energy code targets, finding little correlation between predictive 8760-hour energy modeling and actual energy consumption for a small sample (n=27) of buildings constructed after 2015. Other analysis found that, while large multifamily housing (MFH) buildings showed a general trend similar to predicted reductions in energy use from the implementation of model commercial energy codes, this trend was not evident in the office, K-12 school, and hotel use groups in NYC. No upward or downward trends in energy consumption were found when buildings were grouped by size. Energy audit data were analyzed and it appears that there is bias by audit company on measures recommended to clients. Further research should be performed to cross-analyze this with other attributes, such as building size, vintage, and number of stories. Analysis found that for 281 buildings that were permitted and completed after 2015 and had submitted benchmarking data in 2022, between 81% and 96% (by use group) were found to be in compliance with the 2024 to 2029 NYC BPS emission caps, and between 55% and 89% were in compliance with the 2030-2034 caps. This work is beneficial to the public in helping policymakers and building stakeholders better understand the wide-ranging implications of a BPS.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Electric Readiness in Residential Energy Code: Technical Brief

This technical brief provides requirements for electric readiness that could be incorporated into model residential energy codes. It provides background on the basis and benefits of the provisions, and model code language that can be plugged into the IECC or adapted into other energy codes. This brief has been updated to reflect changes in the 2024 IECC.

2021 IECC↗
NASA NTRS2004

Maximum likelihood decoding analysis of accumulate-repeat-accumulate codes

In this paper, the performance of the repeat-accumulate codes with (ML) decoding are analyzed and compared to random codes by very tight bounds. Some simple codes are shown that perform very close to Shannon limit with maximum likelihood decoding.

LDPC codes turbo-like codes maximum likelihood dec↗
NASA NTRS1995

An Efficient Variable Length Coding Scheme for an IID Source

A scheme is examined for using two alternating Huffman codes to encode a discrete independent and identically distributed source with a dominant symbol. This combined strategy, or alternating runlength Huffman (ARH) coding, was found to be more efficient than ordinary coding in certain circumstances.

data decompression Huffman code coding scheme↗
NASA NTRS1995

Turbo Codes for PCS Applications

A number of the claims for turbo codes as a great advance in coding theory are confirmed, and a complete description is presented of an encoder/decoder pair that could be suitable for PCS applications. A new simple method for trellis termination is described, the effect of interleaver choice on the weight distribution of the code is analyzed, and unequal rate components (which yield better performance) are introduced.

coding turbo codes personal communication systems ↗
NASA NTRS2006

Implementation of a Coded Modulation for Deep Space Optical Communications

We present an efficient implementation of a coded modulation for the deep space optical channel. NASA designed this so called serially concatenated pulse position modulation (SCPPM) code to provide an optical link that can operate within one dB signal energy of the Shannon capacity during a nominal mission condition from Mars. Here, we describe some of the challenges in realizing the SCPPM decoder on a field-programmable gate array (FPGA). Through various architectural optimizations, we achieve a 6 Mbps decoder on a single FPGA. Moreover, we demonstrate that it is possible to communicate reliably on an efficient bits-per-photon count in an end-to-end SCPPM coded system.

turbo codes↗
NASA NTRS1994

Convolutional Encoding of Self-Dual Codes

Self-dual block codes of rate 1/2 are constructed here, The codes are of length 8m with weights w, w = 0 mod 4. The codes have a convolutional portion of length 8m-2 and non-systematic information length 4m-1.

self↗
DOE OSTI2016

Energy Cost Impact of Non-Residential Energy Code Requirements

The 2012 International Energy Conservation Code contains 396 separate requirements applicable to non-residential buildings; however, there is no systematic analysis of the energy cost impact of each requirement. Consequently, limited code department budgets for plan review, inspection, and training cannot be focused on the most impactful items. An inventory and ranking of code requirements based on their potential energy cost impact is under development. The initial phase focuses on office buildings with simple HVAC systems in climate zone 4C. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance. A preliminary estimate of the probability of occurrence of each level of non-compliance was combined with the estimated lost savings for each level to rank the requirements according to expected savings impact. The methodology to develop and refine further energy cost impacts, specific to building type, system type, and climate location is demonstrated. As results are developed, an innovative alternative method for compliance verification can focus efforts so only the most impactful requirements from an energy cost perspective are verified for every building and a subset of the less impactful requirements are verified on a random basis across a building population. The results can be further applied in prioritizing training material development and specific areas of building official training.

code compliance↗