Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CORE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Annealing effects on the structure, photoluminescence, and magnetic properties of GaN/Mn{sub 3}O{sub 4} core-shell nanowires

Nanowires consisting of GaN/Mn{sub 3}O{sub 4} were prepared using a two-step approach that involved dipping the as-synthesized GaN nanowires into an aqueous manganese acetate solution. To examine the effects of annealing, GaN/Mn{sub 3}O{sub 4} core-shell nanowires were heated thermally to 700 {sup o}C in N{sub 2} ambient. Transmission electron microscopy showed that the continuous Mn{sub 3}O{sub 4} shell layer had agglomerated to expose a bare GaN core surface after thermal annealing. The magnetic measurements showed that the ferromagnetic behavior of the GaN nanowires had been suppressed by coating with the Mn{sub 3}O{sub 4} shell, without significant change by the subsequent thermal annealing. The GaN/Mn{sub 3}O{sub 4} core-shell nanowires exhibited blue, green, and red photoluminescence (PL) emission. The red emission was enhanced by thermal annealing. This paper discusses the associated mechanism for the variations in PL and magnetic properties of GaN/Mn{sub 3}O{sub 4} core-shell nanowires. - Abstract: Novel GaN/Mn{sub 3}O{sub 4} core-shell nanowires were synthesized and the effects of thermal annealing on the structure, photoluminescence, and magnetic properties were investigated.

36 MATERIALS SCIENCE↗

The 'virtual density' principle of neutronics: Toward rapid computation of reactivity effects in practical core distortion scenarios

Fast reactor core reactivities are sensitive to geometric distortions arising from three distinct phenomena: (1) irradiation swelling of fuel throughout core lifetime, (2) thermal expansion of fuel during transients, and (3) mechanical oscillations during seismic events. Performing comprehensive reactivity analysis of these distortions requires methods for rapidly computing a multitude of minute reactivity changes. Thus, we introduce the 'virtual density' principle of neutronics as a new perturbation technique to achieve this rapid computation. This new method obviates many of the most challenging aspects of conventional geometric perturbation theory. Essentially, this 'virtual density' principle converts geometric perturbations into equivalent material density perturbations (either isotropic or anisotropic), which are highly accurate and comparatively simple to evaluate. While traditional boundary perturbation theory employs surface integrals, the 'virtual density' principle employs equivalent volume integrals. We introduce and validate this method in three subsequent stages: (1) isotropic 'virtual density', (2) anisotropic 'virtual density' for whole cores, and (3) anisotropic 'virtual density' for interior zones within cores. We numerically demonstrate its accuracy for 2-D core flowering scenarios. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A demonstration of a whole core neutron transport method in a gas cooled reactor

This paper illustrates a capability of the whole core transport method COMET. Building on previous works which demonstrated the accuracy of the method, this work serves to emphasize the robust capability of the method while also accentuating its efficiency. A set of core configurations is presented based on an operating gas-cooled thermal reactor, Japan's HTTR, and COMET determines the eigenvalue and fission density profile throughout each core configuration. Results for core multiplication factors are compared to MCNP for accuracy and also to compare runtimes. In all cases, the values given by COMET differ by those given by MCNP by less than the uncertainty inherent in the stochastic solution procedure, however, COMET requires runtimes shorter on the order of a few hundred. Figures are provided illustrating the whole core fission density profile, with segments of pins explicitly modeled individually, so that pin-level neutron flux behavior can be seen without any approximation due to simplification strategies such as homogenization. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Annular seed-blanket thorium fuel core concepts for heavy water moderated reactors

New reactor concepts to implement thorium-based fuel cycles have been explored to achieve maximum resource utilization. Pressure tube heavy water reactors (PT-HWR) are highly advantageous for implementing the use of thorium-based fuels because of their high neutron economy and on-line re-fuelling capability. The use of heterogeneous seed-blanket core concepts in a PT-HWR where higher-fissile-content seed fuel bundles are physically separate from lower-fissile-content blanket bundles allows more flexibility and control in fuel management to maximize the fissile utilization and conversion of fertile fuel. The lattice concept chosen is a 35-element bundle made with a homogeneous mixture of reactor grade Pu and Th, and with a central zirconia rod to help reduce coolant void reactivity. Several annular heterogeneous seed-blanket core concepts with plutonium-thorium-based fuels in a 700-MWe-class PT-HWR were analyzed, using a once-through thorium (OTT) cycle. Different combinations of seed and blanket fuel were tested to determine the impact on core-average burnup, fissile utilization, power distributions, and other performance parameters. It was found that the various core concepts can achieve a fissile utilization that is up to 30% higher than is currently achieved in a PT-HWR using conventional natural uranium fuel bundles. Up to 67% of the Pu is consumed; up to 43% of the energy is produced from thorium, and up to 363 kg/year of U-233 is produced. Seed-blanket cores with ∼50% content of low-power blanket bundles may require power de-rating (∼58% to 65%) to avoid exceeding maximum limits for peak channel power, bundle power and linear element ratings. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

MOX recycling in GEN 3 + EPR Reactor homogeneous and stable full MOX core

In the case of the EPR (European Pressurized Reactor) reactor, 100% MOX core management is possible with simple design adaptations which are not significantly costly. 100% MOX core management offers several highly attractive advantages. First, it is possible to have the same plutonium content in all the rods of a fuel assembly instead of having rods with 3 different plutonium contents, as in MOX assemblies in current PWRs. Secondly, the full MOX core is more homogeneous. Thirdly, the stability of the core is significantly increased due to a large reduction in the Xe effect. Fourthly, there is a potential for the performance of the MOX fuel to match that of new high performance UO{sub 2} fuel (enrichment up to 4.95 %) in terms of increased burn up and cycle length. Fifthly, since there is only one plutonium content, the manufacturing costs are reduced. Sixthly, there is an increase in the operating margins of the reactor, and in the safety margins in accident conditions. The use of 100% MOX core will improve both utilisation of natural uranium resources and reductions in high level radioactive waste inventory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Checkerboard seed-blanket thorium fuel core concepts for heavy water moderated reactors

New reactor concepts to implement thorium-based fuel cycles have been explored to achieve maximum resource utilization. Pressure tube heavy water reactors (PT-HWR) are highly advantageous for implementing the use of thorium-based fuels because of their high neutron economy and on-line re-fuelling capability. The use of heterogeneous seed-blanket core concepts in a PT-HWR where higher-fissile-content seed fuel bundles are physically separate from lower-fissile-content blanket bundles allows more flexibility and control in fuel management to maximize the fissile utilization and conversion of fertile fuel. The lattice concept chosen was a 35-element bundle made with a homogeneous mixture of reactor grade Pu (about 67 wt% fissile) and Th, and with a central zirconia rod to help reduce coolant void reactivity. Several checkerboard heterogeneous seed-blanket core concepts with plutonium-thorium-based fuels in a 700-MWe-class PT-HWR were analyzed, using a once-through thorium (OTT) cycle. Different combinations of seed and blanket fuel were tested to determine the impact on core-average burnup, fissile utilization, power distributions, and other performance parameters. It was found that various checkerboard core concepts can achieve a fissile utilization that is up to 26% higher than that achieved in a PT-HWR using more conventional natural uranium fuel bundles. Up to 60% of the Pu is consumed; up to 43% of the energy is produced from thorium, and up to 303 kg/year of Pa-233/U-233/U-235 are produced. Checkerboard cores with about 50% of low-power blanket bundles may require power de-rating (65% to 74%) to avoid exceeding maximum limits for channel and bundle powers and linear element ratings. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preliminary analysis of core heat-up for ATFs under accident conditions

The accident-tolerant fuel (ATF) system is aim at upgrading safety characteristics of the nuclear fuel and cladding in a reactor core where active cooling has been lost, and is preferable or comparable to the conventional UO{sub 2}-Zr fuel system when the reactor is in normal operation. In this paper, the improved performance of UO{sub 2}-SiC, UO{sub 2}-FeCrAl fuel systems, and of fully ceramic micro-encapsulated (FCM) fuels: FCM-SiC and FCM-FeCrAl, on the core heat-up progress in a pressurized water reactor (PWR) is analyzed by using the best-estimate system code RELAP5 and severe accident analysis program. For this purpose two accident scenarios are selected: a large break LOCA as a design base accident and an extended station blackout (SBO) severe accident. For the LBLOCA with just low-pressure safety injection, larger volumetric heat capacity and thermal conductivity of ATF materials contribute to a larger safety margin in terms of the peak cladding temperature compared with UO{sub 2}-Zr. Thanks to higher melting temperatures, FCM-SiC is failed by melting almost 1200 s later than UO{sub 2}-Zr. The accumulated production of hydrogen for ATF materials is around 10 times smaller than that for UO{sub 2}-Zr. However, high temperature oxidation of SiC cladding generates carbon monoxide which is combustible, while the melting point of FeCrAl is not high enough. In the SBO scenario with mitigation measure, the advantage of ATF is more evident. If the mitigation measure could not be taken, core heatup is inevitable for all types of fuel system, but the temperature rising of ATF core is much slower. In general, improved high-temperature properties and resistance to oxidation play important roles for ATF cores.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Benchmarking of activation rate in special core in LR-0 reactor

The experiments focused on the determination of activation reaction rates of selected IRDFF materials activated in a well-defined special core assembled in the LR-0 reactor are presented in the paper. The used core is designed and verified for IRDFF library testing by reactivity characterization, fission rates distribution and also neutron spectra measurement at the center of the core. {sup 23}Na(n,2n), {sup 75}As(n,2n), {sup 89}Y(n,2n) and {sup 90}Zr(n,2n) reaction cross sections were measured in this special core. The presented neutron cross sections were derived from experimentally determined reaction rates of irradiated samples of NaF, As{sub 2}O{sub 3}, Y{sub 2}O{sub 3}, and ZrO{sub 2}. These reaction rates are derived from gamma activities of the activation products of studied activation reactions. Net Peak Areas (NPA) of photons accompanying decay were measured using a semiconductor High Purity Germanium (HPGe) detector. Despite the fact that mentioned reactions have a threshold above 10 MeV, where the neutron spectrum in the special LR-0 core is nearly undistinguishable from {sup 235}U prompt fission neutron spectrum, the measured integral cross sections averaged in LR-0 spectrum were corrected for spectral shift. The obtained values of {sup 235}U spectral average cross section are: (3.84 ± 0.19) μb for {sup 23}Na(n,2n); (0.320 ± 0.015) mb for {sup 75}As(n,2n); (0.171 ± 0.006) mb for {sup 89}Y(n,2n); (0.107 ± 0.005) mb for {sup 90}Zr(n,2n). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of a core coolant flow distribution calculation code for HTGRs - 18484

In order to ensure the thermal integrity of fuel in high temperature gas-cooled reactors (HTGRs), it is necessary that the maximum fuel temperature in the normal operation is to be lower than the thermal design target. In the core thermal-hydraulic design of block-type HTGRs, the maximum fuel temperature should be evaluated considering data such as thermal power, core geometry, power and neutron fluence distributions, and core coolant flow distribution. The core coolant flow distribution calculation code used in the design stage of High Temperature engineering Test Reactor (HTTR) presupposes to run on UNIX systems, and its operation and execution procedure are complicated and not user-friendly. Therefore, a new core coolant flow distribution calculation code with a user-friendly system such as simple and easy operations and execution procedures has been developed. In this paper, the outline of the new code is described and the simulation result of an out-of-pile test with one fuel column are shown as the first step of the code validation. The simulation results provide good agreement with the test one. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CANDLE Burning Reactor with Plutonium Fuel Start-up Core

The CANDLE burning fast reactor concept makes it possible to utilize natural uranium or depleted uranium with high burnup of up to 40% without repossessing of spent fuel from the reactor. Once the reactor reaches equilibrium burning wave condition, it needs only natural or depleted uranium, although it needs some amount of fissile material for the startup. Studies have been performed for the startup core using enriched uranium and absorbers. It is expected that plutonium obtained by reprocessing of spent fuel from light water reactors (LWR) will be an excellent fuel for the startup core. Using this fuel for the startup core will eliminate the need to produce enriched uranium, as well as make it possible to utilize the plutonium from spent fuel effectively as a useful resource. For effective utilization of plutonium as a resource, a startup core that requires only a small amount of plutonium fuel is preferable. The purpose of this study was to clarify the CANDLE burning fast reactor concept using a minimum amount of plutonium fuel from LWR spent fuel for the startup core by analysis with a simplified reactor model. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Simulation of Rod Ejection Accident in an Advanced Small PWR Core without Soluble Boron

The soluble boron is used to control the long-term excess reactivity in commercial PWRs but the use of soluble boron has disadvantages such as complications of the reactor coolant system and generation of the liquid wastes. Therefore, there have been lots of interests in designing PWR reactor without soluble boron. Recently, we have designed new small 50 MWe PWR core having no soluble boron for long-term reactivity control. In the core, the excess reactivity is controlled by using the control rods and the advanced particle type burnable poisons over the cycle. The one of the most important issues for the boron-free core is to check if the core is safe under the rod ejection accidents because the reactor is operated with insertion of the control rods. The objective of this work is to give the detailed analysis results of the rod ejection accidents for the advanced small PWR core were analyzed. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Numerical Study of Vortex Core in Turbulent Swirling Flow

Swirling flow has attracted a great deal of research interest. An application of swirling flow can be found in many engineering areas; such as gas cyclone and heat transfer enhancement. In nuclear engineering, swirling flow is used as heat transfer enhancement in rod bundle by installing grid spacer and mixing vane. Because of its extensive applications, there has been a great number of experimental and numerical investigations of swirling flow. McClusky et al., experimentally studied mapping of the lateral velocity in rod bundle using Laser Doppler Velocimetry (LDV) and Conner et al. predicted the flow field in rod bundle by CFD. To understand the characteristics of swirling flow such as tangential velocity and vortex core swirling flow, some researchers investigated swirling flow in a pipe instead of in rod bundle. This is due to the similarity between swirling flow in a pipe and rod bundle. In recent study, flow mapping of 2D velocity field of single-phase swirling flow had been conducted experimentally by Particle Image Velocimetry (PIV). However, this method needs calibration and complicated. The new measurement technique for flow mapping in swirling flow was done by phased array Ultrasonic Velocity Profiler (PAUVP). Hamdani et al., successfully plotted velocity field and determined the swirling core region (vortex core). This technique is nonintrusive and no need calibration. However, there was a limitation of the measurement because phased array UVP cannot capture 360 deg. velocity field inside the pipe. In addition, tangential velocity in CFD results was not agree well with experiment data due asymmetric problem. To evaluate this limitation of experimental method, the numerical simulations using Computational Fluid Dynamics (CFD) needs to be performed. The objective of this study is to use the commercial CFD code Fluent to model the developing turbulent swirling flow induced by twisted tape inside a straight pipe, and to gain an understanding of such a flow and the turbulence models involved in the simulation. Straight pipe is used instead of rod bundle for a simplification. In this work, the Renormalized Group (RNG) k-{epsilon} turbulence model and Reynolds Stress Model (RSM) turbulence model, are performed to study the phenomena of vortex core in a pipe with twisted tape inserts. Effects of the Reynolds number and asymmetric of twisted tape (inclination, {alpha} = 5 deg. and {alpha} = 20 deg.) on swirling core position are examined using water as the testing fluid. Furthermore, the Navier-Stokes equations will be solved to obtain results that can be validated with the previous experimental results. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RISMC Industry Application no. 1 (ECCS/LOCA) Core characterization automation: Reference PWR designs for IA no. 1

The U.S. NRC is currently proposing rulemaking '10 CFR 50.46c' to revise the loss-of-coolant-accident (LOCA) and emergency core cooling system (ECCS) acceptance criteria to include the effects of higher burn-up on cladding performance. The key implications of this proposition are that both cladding and ECCS performance need to be considered in a coupled manner. This implies that LOCA methodologies will need to be updated for regulatory purposes. The Risk-Informed Safety Margin Characterization (RISMC) Pathway, as part of the DOE Light Water Reactor Sustainability (LWRS) research and development program initialed several programs at the Idaho National Laboratory (INL) to support the industry by offering potential solutions to this new LOCA/ECCS analysis. One of these programs is the Industry Application no. 1 (IA1). It's goal is to develop an integrated evaluation model called LOCA Toolkit for the US (LOTUS) to revisit how risks are evaluated in a LOCA under 10 CFR 50.46c. The focus of LOTUS is to establish the automation interfaces among the physics disciplines involved, namely the core design automation, the fuels/clad performance, the system analysis, the risk assessment and the core design optimization. The risk-informed margins management approach for IA1 will provide a means of quantifying the impact on the key LOCA analysis figures-of-merit like peak cladding temperature (PCT), equivalent cladding reacted (ECR), etc. of a change in LOCA analysis inputs. The information obtained can then be used for decision-making and margin management. The modular approach for LOTUS will enable plant owners/vendors to further customize the LOTUS framework for use within their established codes and methods. One of the LOTUS modules deals with the core design automation (CD-A). The purpose of this module is to supply the LOCA analysis with initial conditions, i.e. assembly/pin power histories, power shapes, etc. to be employed by the Fuels/Clad Performance (EP) and System Analysis (SA) modules. In the CD-A module, the plant owner/operator will characterize his core design with the tools he has. For the current LOTUS demonstration, the tools used are the already coupled codes PHISICS and RELAP5-3D2,3. Cross section generation will be done using the Studsvik lattice code HELIOS-2.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evaluation of a potassium filled UO{sub 2} core in a beryllium-reflected space reactor - 14371

The critical configuration of the small, compact critical assembly (SCCA) experiments performed at the Oak Ridge Critical Experiments Facility (ORCEF) in 1962-1965[1,2] have been evaluated for the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and were determined to be acceptable benchmark experiments and are included in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook)[3]. The initial intent of these experiments was to support the design of the Medium Power Reactor Experiment (MPRE) program, whose purpose was to study 'power plants for the production of electrical power in space vehicles'.[4] The third configuration in this series of experiments was a beryllium-reflected mockup of a stainless-steel-clad, highly enriched uranium (HEU)-O{sub 2} fuel, potassium-cooled, space power reactor. Reactivity measurements, cadmium ratio spectral measurements, and fission rate measurements were measured through the core and top reflector. Fuel effect worth measurements and neutron moderating and absorbing material worths were also measured in the assembly fuel region. The cadmium ratios, fission rate, and worth measurements were evaluated for the International Reactor Physics Experiment Evaluation Project (IRPhEP) and are published in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook)[5]. More recently, two additional critical configurations have been evaluated and added to the existing evaluation report in the ICSBEP Handbook. The new critical configurations measure the effect of filling the core with potassium. The critical configuration consisted of 30.48 cm tall fuel tubes of 93.15 wt.% enriched uranium dioxide (UO{sub 2}) pellets. Each fuel tube had 26 pellets with a total mass of 295.8 g UO{sub 2} per tube. There were 253 tubes were arranged with 1.506-cm center-to-center, triangular spacing and surrounded on all side by a beryllium reflected. The reactivity of the system was measured with the core tank empty and filled with potassium. The system reactivity was increased from 13.4 c to 32 c. This change in system reactivity represents the worth of the potassium. Simple benchmark models for the empty and potassium filled cores have been derived and evaluated and found to be acceptable as benchmark experiments. The benchmark experiment eigenvalues are 1.0001 ± 0.0008 and 1.0011 ± 0.0009 for the empty and filled cores, respectively. When calculated with MCNP5 and ENDF/B-VII.0 the calculated eigenvalues are 0.98906 ± 0.00002 and 0.98883 ± 0.00002, respectively. These results are concerning due to the drop of the calculated system reactivity when potassium is added to the system rather than the expected increase in system reactivity. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Rod-by-rod detailed Monte Carlo method of Cofrentes NPP as a commercial core critical - 14482

The detailed rod-by-rod three dimensional modeling of large cores such as the commercial reactors is now possible. The simultaneous improvement in fuel depletion systems based on Monte Carlo codes allows using the criticality of first and reload cores as critical experiments, usually defined as commercial core criticals (CCC). The interest of such critical configurations for reload cores is evident for the validation of codes and cross-sections used for burn-up credit. Nevertheless other areas of the fuel management can benefit from this capabilities since the realistic rod-by-rod detailed modelling of fuel assemblies can provide valuable help in the optimization of reload patterns and in the licensing of other production-oriented calculation tools In this presentation the results obtained in reactivity and power distribution in the analysis of Cofrentes NPP first criticality and of a low-burnup xenon-equilibrium state-point and its comparison with in-core instrumentation measurements are presented. The plan for development of a local rod-by-rod Monte Carlo fuel depletion capability is presented as well. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Study of effect of PWR cold leg temperature gradient on reactor core condition

Effects of temperature and flow gradients in Westinghouse designed three-loop Pressurized Water Reactor (PWR) cold legs, the piping between the main coolant pump and the reactor vessel, were evaluated using Computational Fluid Dynamics (CFD) code STAR CCM+ and coupled neutronic and thermal-hydraulic (T/H) code system VERA. In the parametric study, several symmetric and asymmetric temperature gradients that were significantly larger than those observed from plant measurements were applied to the cold leg inlets for comparison with the base case without any temperature gradient. A CFD model using the STAR-CCM+ code was developed for a portion of the RCS region between the Reactor Coolant Pump (RCP) and the core inlet based on previously validated modeling approach. The CFD simulation results were processed for the temperature and flow rate distributions at the core inlet as input to the VERA calculations. The VERA code system consists of COBRA-TF (CTF) for thermal-hydraulics, MPACT for reactor physics and neutron transport, and ORIGEN for isotopic depletion. The VERA model was for depletion calculations of a high-burnup loading pattern with the reactor core in pin-by-pin and subchannel resolution. The results of the study indicate that the postulated temperature gradients within the PWR cold legs do not result in any significant changes in the core inlet temperature distributions and the core power distributions during the reactor operation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Flattening the Radial Temperature Profile across the Transformational Challenge Reactor Core

The Transformational Challenge Reactor (TCR) program is demonstrating an agile development approach to advanced nuclear reactor design, which has traditionally utilized a linear design process. In leveraging artificial intelligence, additive manufacturing, advanced materials, and cutting-edge modeling and simulation, the TCR program aims to minimize the high cost and lengthy deployment timelines now standard in the nuclear industry. Within a relatively short period of time, a robust and mature advanced gas-cooled reactor was iteratively designed under the TCR program, using these cutting-edge technologies. The TCR is a 3 MWt gas-cooled microreactor fueled with uranium nitride (UN) tristructural isotropic (TRISO) fuel particles. Though manufactured via traditional means, these UN TRISO particles are loaded into additively manufactured silicon carbide (SiC) cans [4]. Once loaded with TRISO particles, the SiC cans are densified using a chemical vapor infiltration process. The additively manufactured SiC enables significantly more freedom in the design of the fuel form than could ever be achieved using traditionally manufactured SiC. The helium coolant, pressurized to 5 MPa, enters the core at 300°C and nominally exits it at 500°C. Typically, the most thermally limiting components in any reactor design are the fuel assemblies in the core center. To provide a wide thermal margin in these central fuel assemblies, the flow may be biased toward the center of the core to more effectively cool these fuel assemblies with more power deposition and flatten the core’s radial temperature distribution. An analytical fluid model of the TCR core was developed to explore methods for biasing the flow away from the cooler outer fuel assemblies and towards the hotter inner ones. Higher-fidelity models developed in STAR-CCM+ 2020.3.1, a computational fluid dynamics code, were then utilized to verify the analytical model’s findings.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MULTI-CORE AND OPTICAL PROCESSOR RELATED APPLICATIONS RESEARCH AT OAK RIDGE NATIONAL LABORATORY

High-speed parallelization of common tasks holds great promise as a low-risk approach to achieving the significant increases in signal processing and computational performance required for next generation innovations in reconfigurable radio systems. Researchers at the Oak Ridge National Laboratory have been working on exploiting the parallelization offered by this emerging technology and applying it to a variety of problems. This paper will highlight recent experience with four different parallel processors applied to signal processing tasks that are directly relevant to signal processing required for SDR/CR waveforms. The first is the EnLight Optical Core Processor applied to matched filter (MF) correlation processing via fast Fourier transform (FFT) of broadband Dopplersensitive waveforms (DSW) using active sonar arrays for target tracking. The second is the IBM CELL Broadband Engine applied to 2-D discrete Fourier transform (DFT) kernel for image processing and frequency domain processing. And the third is the NVIDIA graphical processor applied to document feature clustering. EnLight Optical Core Processor. Optical processing is inherently capable of high-parallelism that can be translated to very high performance, low power dissipation computing. The EnLight 256 is a small form factor signal processing chip (5x5 cm2) with a digital optical core that is being developed by an Israeli startup company. As part of its evaluation of foreign technology, ORNL's Center for Engineering Science Advanced Research (CESAR) had access to a precursor EnLight 64 Alpha hardware for a preliminary assessment of capabilities in terms of large Fourier transforms for matched filter banks and on applications related to Doppler-sensitive waveforms. This processor is optimized for array operations, which it performs in fixed-point arithmetic at the rate of 16 TeraOPS at 8-bit precision. This is approximately 1000 times faster than the fastest DSP available today. The optical core performs the matrix-vector multiplications, where the nominal matrix size is 256x256. The system clock is 125MHz. At each clock cycle, 128K multiply-and-add operations per second (OPS) are carried out, which yields a peak performance of 16 TeraOPS. IBM Cell Broadband Engine. The Cell processor is the extraordinary resulting product of 5 years of sustained, intensive R&D collaboration (involving over $400M investment) between IBM, Sony, and Toshiba. Its architecture comprises one multithreaded 64-bit PowerPC processor element (PPE) with VMX capabilities and two levels of globally coherent cache, and 8 synergistic processor elements (SPEs). Each SPE consists of a processor (SPU) designed for streaming workloads, local memory, and a globally coherent direct memory access (DMA) engine. Computations are performed in 128-bit wide single instruction multiple data streams (SIMD). An integrated high-bandwidth element interconnect bus (EIB) connects the nine processors and their ports to external memory and to system I/O. The Applied Software Engineering Research (ASER) Group at the ORNL is applying the Cell to a variety of text and image analysis applications. Research on Cell-equipped PlayStation3 (PS3) consoles has led to the development of a correlation-based image recognition engine that enables a single PS3 to process images at more than 10X the speed of state-of-the-art single-core processors. NVIDIA Graphics Processing Units. The ASER group is also employing the latest NVIDIA graphical processing units (GPUs) to accelerate clustering of thousands of text documents using recently developed clustering algorithms such as document flocking and affinity propagation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗