Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPANIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Development and application of two-step uncertainty propagation and sensitivity analysis methodology for fast reactor safety analysis

Uncertainty quantification (UQ) in nuclear reactors for transients is directly linked with safety assessment through the cross-sections uncertainties, provided as a covariance matrix, which are propagated through the reactor system to output of interest pertaining to reactor safety, such as peak temperatures in fuel/clad/coolant. Using a two-step approach, uncertainties are first quantified and propagated from basic input variables (such as reaction cross-sections) to intermediate quantities (such as reactivity feedback coefficients) through lattice level calculations. Uncertainties of intermediate quantities (from the first step) are then propagated through the system transient calculations, in the second step, to obtain uncertainties on reactor safety output parameters of interest. The scope of this work consists of Uncertainty Quantification & Propagation of nuclear data uncertainties that are highly correlated through unprotected transient overpower and unprotected loss of flow to assess their impact on core safety parameters. This two-step approach in the presence of covariance renders the sensitivity analysis very challenging. In fact, usually the sensitivity analysis is restricted to each step, which limits its application since the sensitivities between the system output quantities and the basic input variables are difficult to obtain. Here, in this work, we address this issue by proposing a simple, general methodology to combine the sensitivity indices obtained in each step by assuming the model behavior being linear. For the first step Generalized Perturbation theory based indices are used while in the second step the recently studied Johnson indices. The uncertainty quantification and sensitivity methodologies discussed here are demonstrated on a generic LFR design which is based on the 500 MWth demonstration Lead-cooled fast reactor (DLFR) using oxide fuel, developed by Westinghouse Electric Company (WEC).

42 - ENGINEERING↗

High fidelity multiphysics tightly coupled model for a lead cooled fast reactor concept and application to statistical calculation of hot channel factors

A tightly coupled multiphysics code system is established using the MOOSE framework for hot channel factor (HCF) evaluation on a Lead Fast Reactor (LFR) concept. The coupled system is driven by the Griffin multiphysics coupling capability under which the MOOSE Heat Transfer module and NekRS computational fluid dynamics solver are coupled for conjugate heat transfer using the Cardinal application. The coupled capability is demonstrated on an LFR assembly model based on materials and geometry of a prototypical lead-cooled fast reactor design by Westinghouse Electric Company, LLC. Moreover, the work integrates the Multiphysics Object Oriented Simulation Environment (MOOSE) Stochastic Tools Module (STM) to perform calculations for statistical analysis of HCF. Furthermore, the coupling strategy and workflow demonstrated in this paper is not only useful for predicting accurate hot channel factors for different kinds of advanced reactors but also for other engineering applications such as control rod worth assessment, generation of high-fidelity database for Artificial intelligence (AI)/machine learning (ML) training, design optimization and multi-resolution modeling.

Cardinal↗

Application of predictive data analytics to model daily hydrocarbon production using petrophysical, geomechanical, fiber-optic, completions, and surface data: A case study from the Marcellus Shale, North America

Predicting gas production from stimulated unconventional reservoirs has always been a challenge to oil and gas companies because the physics of fluid flow through such reservoirs is not well understood. On the other hand, modeling gas production from shale reservoirs is a complex multi-variate problem that requires proper integration of data from multiple disciplines, such as geology, petrophysics, geomechanics, completions, and surface-based measurements, etc. Here this study demonstrates the application of data-driven machine learning algorithms, integrating geoscientific, distributed acoustic sensing (DAS), distributed temperature sensing (DTS) fiber-optic, completions, flow scanner production log, and surface data to model daily gas production from a 28-stage stimulated horizontal well drilled in the Marcellus Shale of the Appalachian basin in North America. In addition, this study aims to utilize the data from a fiber-optic monitoring system, such as DAS and DTS to evaluate the well performance. We build supervised data-driven machine learning models using Random Forest (RF), Artificial Neural Network (ANN), and Support Vector Machine (SVM) algorithms to understand the well performance and forecast the daily gas production. The study compares the forecasted results, tests the level of accuracy, and addresses different issues with these machine learning algorithms. A spatio-temporal database is constructed and used to perform sensitivity analyses to identify the key drivers for gas production. The results show that RF and ANN algorithms can be used to predict daily gas production with significantly high accuracy; however, RF algorithm is the best predictor in terms of highest accuracy (96%), less computational time and cost. Based on sensitivity analysis, it appears that Poisson's ratio, minimum horizontal stress, DAS, casing pressure, gamma log are the most important parameters to predict gas production.

02 PETROLEUM↗

A review of micromirror arrays

The aim of this article is to provide a review of micromirror array (MMA) technologies (2631 MMA research papers and patents were reviewed for this effort). The performance capabilities of 277 MMA designs from 49 companies and 23 academic research groups are categorized and compared. The designs are categorized according to (i) their array’s dimension (e.g., 2D arrays consisting of mirrors that cover a surface, 1D arrays consisting of mirrors in a row, and 0D arrays consisting of only a single mirror), (ii) the nature of the surface of their mirrors (e.g., continuous or discrete), (iii) what combination of tip, tilt, and/or piston degrees of freedom (DOFs) they achieve, and (iv) how they are actuated. Standardized performance metrics that can be systematically applied to every MMA design (e.g., mirror area, fill factor, pitch, range of motion, maximum acceleration, actuator energy density, and number of uncontrolled DOFs) are defined and plotted for existing designs to enable their fair comparison. Theoretical bounds on what is physically possible for MMAs to achieve are also derived and depicted in these plots to highlight the amount of performance improvement that remains to be achieved by future designs and guidelines are provided to aid in the development of these future designs.

42 ENGINEERING↗

Direct comparison of gamma, electron beam and X-ray irradiation doses on characteristics of low-density polyethylene, polypropylene homopolymer, polyolefin elastomer and chlorobutyl rubber medical device polymers

There is a growing need for increased efficiency in the sterilization of single use medical devices and other products that contain polymer components. Gamma radiation is widely used for devices suited for radiation sterilization; however, safety, throughput and cobalt-60 source availability are challenging the prospect of relying on gamma radiation to meet the anticipated needs of the industry. Use of electron beam (e-beam) and X-rays as alternatives to gamma for radiation sterilization have been hampered in part by a concern that these modalities may adversely affect polymer integrity and performance relative to the gamma method, for which the industry has had much more experience. To address this concern, the effects of sterilization-relevant doses of ebeam, X-ray and gamma radiation were directly compared using common medical device polymers found in two prototypical commercial devices currently sterilized using cobalt-60 gamma irradiation. The Becton, Dickinson and Company (BD) Vacutainer™ Plus tube contains low-density polyethylene and chlorobutyl rubber components, while the BD Vacutainer™ Push Button Blood Collection Set contains polypropylene homopolymer and polyolefin elastomer components. Injection-molded samples prepared from the polymers used in these products were exposed to target doses of 15, 35, 50 and 80 kGy using gamma, e-beam and X-ray radiation. Changes in coloration, tensile properties and hardness were measured for each condition, and the effects of e-beam and X-ray irradiation compared with the effects of gamma irradiation on these properties. Both e-beam and X-ray appear as viable alternatives to gamma irradiation for sterilization of the polymers tested.

sterilization, gamma, X-ray, electron beam, radiat↗

The impact of market design and clean energy incentives on strategic generation investments and resource adequacy in low-carbon electricity markets

Well-designed electricity markets play a crucial role in maintaining reliable electric power systems, which are critical in modern society. Here, this study examines the impact of different electricity market designs and clean energy incentive schemes on supporting renewable energy integration and achieving clean energy goals. To this end, we utilize a game-theoretical generation expansion planning model where generation companies make investment and retirement decisions to maximize their expected profit. The model is structured as an equilibrium problem with equilibrium constraints (EPEC) and solved using a diagonalization approach combined with progressive hedging. We analyze three types of electricity market designs: an energy-only market, a capacity market, and a clean energy market, and consider a wide range of market parameters resulting in 14 total scenarios. Wind and solar capacity comprise the majority of new investments in all considered scenarios, but the resultant system planning reserve margin (PRM) can differ significantly depending on market parameters. We also find that profit-driven investments lead to lower PRMs than a traditional system cost minimization approach. These individual scenario results further demonstrate how different market designs and clean energy incentive schemes may influence investor decision-making and impact resource adequacy throughout the clean energy transition.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The SACADA database for human reliability and human performance

Lack of appropriate and sufficient human performance data has been identified as a key factor affecting human reliability analysis (HRA) quality especially in the estimation of human error probability (HEP). The Scenario Authoring, Characterization, and Debriefing Application (SACADA) database was developed by the U.S. Nuclear Regulatory Commission (NRC) to address this data need. An agreement between NRC and the South Texas Project Nuclear Operating Company (STPNOC) was established to support the SACADA development with aims to make the SACADA tool suitable for implementation in the nuclear power plants' operator training program to collect operator performance information. The collected data would support the STPNOC's operator training program and be shared with the NRC for improving HRA quality. This paper discusses the SACADA data taxonomy, the theoretical foundation, the prospective data to be generated from the SACADA raw data to inform human reliability and human performance, and the considerations on the use of simulator data for HRA. Each SACADA data point consists of two information segments: context and performance results. Context is a characterization of the performance challenges to task success. The performance results are the results of performing the task. The data taxonomy uses a macrocognitive functions model for the framework. At a high level, information is classified according to the macrocognitive functions of detecting the plant abnormality, understanding the abnormality, deciding the response plan, executing the response plan, and team related aspects (i.e., communication, teamwork, and supervision). The data are expected to be useful for analyzing the relations between context, error modes and error causes in human performance.

99 GENERAL AND MISCELLANEOUS↗

Geothermal barriers, policies and economics in Chile – Lessons for the Andes

The Andes is the largest undeveloped geothermal region in the world. The Chilean case is the most puzzling because the country is largely dependent on imported fuels causing, among other issues, high energy prices and energy dependency. But even though it has large quantities of geothermal resources which have been explored since the 1920s, no geothermal power plant has been constructed yet. The barriers for geothermal development in Chile have not been studied in detail and limited information is available about the real economic feasibility of geothermal power generation and whether effective incentives are needed for its development. In this study we present an integrated analysis of geoscientific, economic, historical and regulatory aspects of geothermal development in Chile based on the compilation of new and previously published data. Through a survey of key participants from government institutions, industry and academia we identified the main perceived advantages, barriers, and efficient incentives. The absence of clear medium-to-long term energy policies and a lack of government incentives for companies to overcome financial risk are perceived as the main barriers. Additionally, we calculated the estimated average Levelized Costs of Energy (LCoE) of geothermal electricity generation using different scenarios to illustrate the potential impact of possible government policies. The present conditions and without incentives we estimated a base case geothermal LCoE in Chile which would be "near competitive" compared to the average contract prices. Further analysis would be needed to estimate the effect of different policy incentives more rigorously. Finally, we propose some guidelines for geothermal stakeholders to encourage geothermal power development; these might prove useful to other Andean and developing countries as well.

15 GEOTHERMAL ENERGY↗

Photovoltaic-electrodialysis regeneration method for liquid desiccant cooling system

Liquid desiccant cooling system (LDCS) is an (a novel) air-conditioning system with good energy saving potential. Regenerator is the power centre for LDCS. Currently, the regeneration process is always fuelled by thermal energy. Nevertheless, this regeneration pattern has some disadvantages in that its performance will become poor when the surrounding atmosphere is of high humidity, and the heat provided for regeneration will be unfavourable to the following dehumidification process. To ameliorate that, a new regeneration method is proposed in this paper: a membrane regenerator is employed to regenerate the liquid desiccant in an electrodialysis way; while solar photovoltaic generator is adopted to supply electric power for this process. Analysis has been made about this new regeneration method and the result reveals: this new manner achieves good stability with the immunity against the adverse impact from the outside high humidity; its performance is much higher than that of the thermal regeneration manner while putting aside the low efficiency of the photovoltaic system. Besides, purified water can be obtained in company with the regeneration process. (author)

14 SOLAR ENERGY↗

Consequences of neglecting the interannual variability of the solar resource: A case study of photovoltaic power among the Hawaiian Islands

The interannual variability of the solar irradiance and meteorological conditions are often ignored in favor of single-year data sets for modeling power generation and evaluating the economic value of photovoltaic (PV) power systems. Yet interannual variability significantly impacts the generation from one year to another of renewable power systems such as wind and PV. Consequently, the interannual variability of power generation corresponds to the interannual variability of capital returns on investment. The penetration of PV systems within the Hawaiian Electric Companies' portfolio has rapidly accelerated in recent years and is expected to continue to increase given the state's energy objectives laid out by the Hawaii Clean Energy Initiative. We use the National Solar Radiation Database (1998-2015) to characterize the interannual variability of the solar irradiance and meteorological conditions across the State of Hawaii. These data sets are passed to the National Renewable Energy Laboratory's System Advisory Model (SAM) to calculate an 18-year PV power generation data set to characterize the variability of PV power generation. We calculate the interannual coefficient of variability (COV) for annual average global horizontal irradiance (GHI) on the order of 2% and COV for annual capacity factor on the order of 3% across the Hawaiian archipelago. Regarding the interannual variability of seasonal trends, we calculate the COV for monthly average GHI values on the order of 5% and COV for monthly capacity factor on the order of 10%. We model residential-scale and utility-scale PV systems and calculate the economic returns of each system via the payback period and the net present value. We demonstrate that studies based on single-year data sets for economic evaluations reach conclusions that deviate from the true values realized by accounting for interannual variability.

14 SOLAR ENERGY↗

Electrical characterization and comparison of CIGS solar cells made with different structures and fabrication techniques

In a previous study, we reported on Cu(In,Ga)Se2-based (CIGS) solar cell samples collected from different research laboratories and industrial companies with the purpose of understanding the range of CIGS materials that can lead to high-quality and high-efficiency solar panels. Here, we report on electrical measurements of those same samples. Electron-beam induced current and time-resolved photoluminescence (TRPL) gave insights about the collection probability and the lifetime of carriers generated in each absorber. Capacitance and drive-level capacitance profiling revealed nonuniformity in carrier-density profiles. Admittance spectroscopy revealed small activation energies (= 0.03 eV) indicative of the inversion strength, larger activation energies (> 0.1 eV) reflective of thermal activation of absorber conductivity and a deeper defect level. Deep-level transient spectroscopy (DLTS) probed deep hole-trapping defects and showed that all samples in this study had a majority-carrier defect with activation energy between 0.3 eV and 0.9 eV. Optical-DLTS revealed deep electron-trapping defects in several of the CIGS samples. This work focused on revealing similarities and differences between high-quality CIGS solar cells made with various structures and fabrication techniques.

14 SOLAR ENERGY↗

CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects

Cadmium telluride (CdTe)-based cells have emerged as the leading commercialized thin film photovoltaic technology and has intrinsically better temperature coefficients, energy yield, and degradation rates than Si technologies. More than 30 GW peak (GWp) of CdTe-based modules are installed worldwide, multiple companies are in production, modules are shipping at up to 18.6% efficiency, and lab cell efficiency is above 22%. We review developments in the science and technology that have occurred over approximately the past decade. These achievements were enabled by manufacturing innovations and scaling module production, as well as maximizing photocurrent through window layer optimization and alloyed CdSe x Te 1-x (CST) absorbers. Improved chlorine passivation processes, film microstructure, and serendipitous Se defect passivation significantly increased minority carrier lifetime. Efficiencies >22% have been realized for both Cu and As doped CST-based cells. The path to further efficiency gains hinges primarily on increasing open circuit voltage (V oc ) and fill factor (FF) through innovations in materials, fabrication methods, and device stacks. Replacing the longstanding Cu doping with As doping is resulting in better module stability and is being translated to large-scale production. To realize 25% efficiency and >1 V V oc , research and development is needed to increase the minority carrier lifetime beyond 100 ns, reduce grain boundary and interface recombination, and tailor band diagrams at the front and back interfaces. Many of these goals have been realized separately however combining them together using scalable manufacturing approaches has been elusive to date. We review these achievements and outstanding opportunities for this remarkable photovoltaic technology.

14 SOLAR ENERGY↗

Surface Science Opportunities in the Electronic Structure of ZnO (A Perspective on the Article, "Quantitative Analysis of Surface Donors in ZnO", by D.C. Look)

ZnO is a wide-gap oxide semiconductor of considerable current interest for electronics, optoelectronics, and, possibly, semiconductor spintronics. Through selective electronic doping, ZnO can be a transparent conducting oxide [1], a UV light emitter [2,3], and, when alloyed with a few to several atomic percent of Co, Mn or other transition metals with unpaired d electrons, is squarely at the center of controversy in the field of high-Tc ferromagnetic semiconductors [4]. Despite this range of interests, fundamental aspects of electronic doping in ZnO remain poorly understood. For instance, theoretical calculations suggest that H at either interstitial or substitutional sites is responsible for the persistent n-type conductivity that frustrates efforts to achieve p-type behavior, an essential requirement for the fabrication of pn light emitting diodes and hole-mediated ferromagnetic coupling of Mn dopants [5,6]. Yet, experimental studies do not in general align with this prediction. Another interesting aspect of n-type conduction in ZnO is the appearance of a near-surface conducting channel that appears to be present in bulk crystals [7,8]. Although it has been a few years since the original observation of this phenomenon was described, detailed understanding is lacking. In this paper, David Look presents a transport study aimed at gaining insight into the phenomenon of near-surface conductivity in bulk ZnO. All samples investigated were unintentionally n-type, as is typical. The measured Hall data were interpreted using a two-layer conduction model based on standard charge balance equations. Look fit the temperature dependence of the electron mobility and carrier concentration and extracted the thicknesses of the surface conducting layer, which dominates at lower temperatures, for bulk crystals synthesized by different methods and marketed by different companies. By making reasonable assumptions about the surface acceptor density, the lower limit of the surface conducting layer thickness was extracted from the transport data. From a surface science perspective, two aspects of the investigation are of particular interest: (i) the donor concentration was enhanced by annealing in forming gas, which is 5% H2, and, (ii) despite relatively weak variation in the sheet carrier concentration, the surface conducting layer thickness (dsurf) varied from as large as 28 nm to as small as 1.5 nm, depending on the method of preparation and supplier. The ongoing exploration of this phenomenon begs for the kind of experiments that practitioners of surface, interface and thin-film science can readily conduct. In bulk crystals, is H doping really the cause? Answering this question represents a major challenge because the donor concentration is in the 1017-1018 cm-3 range. Determining the donor identity in this concentration range is a major experimental hurdle. How does dsurf depend on crystallographic orientation? How does the phenomenon depend on the extent of band bending? Does persistent photoconductivity come into play? Can the effect be modified by band bending modification via surface photovoltage effects? All of the above questions pertain to epitaxial films as well, but other questions also arise. How do the film thickness and strain state affect dsurf? Can the surface conduction effect be enhanced by judicious design and growth of quantum well structures made from ZnO, MgxZn1-xO, and/or CdxZn1-xO? Answering these and other questions that arise will expand our understanding of this fascinating and potentially important material, as well as pave the way for device applications.

36 MATERIALS SCIENCE↗

Metabolomics approaches for discovering biomarkers of drug-induced hepatotoxicity and nephrotoxicity

Hepatotoxicity and nephrotoxicity are two major reasons that drugs are withdrawn post-market, and hence it is of major concern to both the FDA and pharmaceutical companies. The number of cases of serious adverse effects (SAEs) in marketed drugs has climbed faster than the number of total drug prescriptions issued. In some cases, preclinical animal studies fail to identify the potential toxicity of a new chemical entity (NCE) under development. The current clinical chemistry biomarkers of liver and kidney injury are inadequate in terms of sensitivity and/or specificity, prompting the need to discover new translational specific biomarkers of organ injury. Metabolomics along with genomics and proteomics technologies have the capability of providing translational diagnostic and prognostic biomarkers specific for early stages of liver and kidney injury. Metabolomics has several advantages over the other omics platforms such as ease of sample preparation, data acquisition and use of biofluids collected through minimally invasive procedures in preclinical and clinical studies. The metabolomics platform is reviewed with particular emphasis on applications involving drug-induced hepatotoxicity and nephrotoxicity. Analytical platforms for metabolomics, chemometrics for mining metabolomics data and the applications of the metabolomics technologies are covered in detail with emphasis on recent work in the field.

60 APPLIED LIFE SCIENCES↗

Human health safety evaluation of cosmetics in the EU: A legally imposed challenge to science

As stated in the European legislation, cosmetic products present on the European market must be safe for the consumer. Safety evaluation of the products is carried out by a qualified safety assessor who needs to consider potential exposure scenarios next to the physicochemical and toxicological profiles of all composing ingredients. Whereas, until recently, the tools to determine the toxicological profile of cosmetic ingredients mainly consisted of animal experiments, they have now been narrowed down substantially by the legally imposed animal testing ban on cosmetic ingredients, taken up in the Cosmetic Products Directive (76/768/EEC). This Directive, however, is not a stand-alone piece of European legislation, since as well directly as indirectly it is influenced by a complex web of related legislations. Vertical legislations deal with different categories of chemicals, including dangerous substances, biocides, plant protection products, food additives, medicinal products, and of course also cosmetics. Horizontal legislative texts, on the contrary, cover more general fields such as protection of experimental animals, consumer product safety, misleading of consumers, specific provisions for aerosols, and others. Experience has learnt that having a general overview of these related legislations is necessary to understand their impact on the cosmetic world in general terms and on cosmetic safety evaluation in particular. This goes for a variety of concerned parties, including national and European regulators/agencies, contract laboratories, raw material suppliers, cosmetic companies, research and educational centers. They all deal with a number of aspects important for the quality and toxicity of cosmetics and their ingredients. This review summarises the most relevant points of the legislative texts of different types of product categories and emphasises their impact on the safety evaluation of cosmetics.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Impact of biomarker development on drug safety assessment

Drug safety has always been a key aspect of drug development. Recently, the Vioxx case and several cases of serious adverse events being linked to high-profile products have increased the importance of drug safety, especially in the eyes of drug development companies and global regulatory agencies. Safety biomarkers are increasingly being seen as helping to provide the clarity, predictability, and certainty needed to gain confidence in decision making: early-stage projects can be stopped quicker, late-stage projects become less risky. Public and private organizations are investing heavily in terms of time, money and manpower on safety biomarker development. An illustrative and 'door opening' safety biomarker success story is the recent recognition of kidney safety biomarkers for pre-clinical and limited translational contexts by FDA and EMEA. This milestone achieved for kidney biomarkers and the 'know how' acquired is being transferred to other organ toxicities, namely liver, heart, vascular system. New technologies and molecular-based approaches, i.e., molecular pathology as a complement to the classical toolbox, allow promising discoveries in the safety biomarker field. This review will focus on the utility and use of safety biomarkers all along drug development, highlighting the present gaps and opportunities identified in organ toxicity monitoring. A last part will be dedicated to safety biomarker development in general, from identification to diagnostic tests, using the kidney safety biomarkers success as an illustrative example.

60 APPLIED LIFE SCIENCES↗

EU Framework 6 Project: Predictive Toxicology (PredTox)-overview and outcome

In this publication, we report the outcome of the integrated EU Framework 6 Project: Predictive Toxicology (PredTox), including methodological aspects and overall conclusions. Specific details including data analysis and interpretation are reported in separate articles in this issue. The project, partly funded by the EU, was carried out by a consortium of 15 pharmaceutical companies, 2 SMEs, and 3 universities. The effects of 16 test compounds were characterized using conventional toxicological parameters and 'omics' technologies. The three major observed toxicities, liver hypertrophy, bile duct necrosis and/or cholestasis, and kidney proximal tubular damage were analyzed in detail. The combined approach of 'omics' and conventional toxicology proved a useful tool for mechanistic investigations and the identification of putative biomarkers. In our hands and in combination with histopathological assessment, target organ transcriptomics was the most prolific approach for the generation of mechanistic hypotheses. Proteomics approaches were relatively time-consuming and required careful standardization. NMR-based metabolomics detected metabolite changes accompanying histopathological findings, providing limited additional mechanistic information. Conversely, targeted metabolite profiling with LC/GC-MS was very useful for the investigation of bile duct necrosis/cholestasis. In general, both proteomics and metabolomics were supportive of other findings. Thus, the outcome of this program indicates that 'omics' technologies can help toxicologists to make better informed decisions during exploratory toxicological studies. The data support that hypothesis on mode of action and discovery of putative biomarkers are tangible outcomes of integrated 'omics' analysis. Qualification of biomarkers remains challenging, in particular in terms of identification, mechanistic anchoring, appropriate specificity, and sensitivity.

60 APPLIED LIFE SCIENCES↗