Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Electrochemically induced crystallization of amorphous materials in molten MgCl2: boron nitride and hard carbon

A novel and versatile strategy for the amorphous-to-crystalline transformation of boron nitride (BN) with the capability to control the degree of crystallization was developed through an electrochemical pathway using MgCl 2 at low temperature (750 °C). This procedure can be extended to the transformation of amorphous carbon to graphite, which significantly reduces the energy and cost, accelerates the synthesis process and could potentially replace industrial graphite synthesis globally. Therefore, the synthesized graphite exhibits much enhanced electrochemical performance at high charge–discharge rates (5C) compared to commercial synthetic graphite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced strength of nano-polycrystalline diamond by introducing boron carbide interlayers at the grain boundaries

Polycrystalline diamond with high mechanical properties and excellent thermal stability plays an important role in industry and materials science. However, the increased inherent brittle strength with the increase of hardness has severely limited its further widespread application. In this work, we produced well-sintered nano-polycrystalline (np) diamond by directly sintering fine diamond powders with the boron carbide (B 4 C) additive at high pressure and high temperatures. The highest hardness value of up to ~90 GPa was observed in the np-diamond (consisting of fine grains with a size of 16 nm) by adding 5 wt% B 4 C at 18 GPa and 2237 K. Moreover, our results reveal that the produced samples have shown noticeably enhanced strength and toughness (18.37 MPa m 0.5 ) with the assistance of the soft phase at the grain boundaries, higher than that of the hardest known nano-twined diamond by ~24% and a little greater than that of the toughest CVD diamond (18 MPa m 0.5 ). We report this study offers a novel functional approach in improving and controlling the hardness and stiffness of polycrystalline diamond.

36 MATERIALS SCIENCE↗

Lanthanide thioborates, an emerging class of nonlinear optical materials, efficiently synthesized using the boron–chalcogen mixture method

Here, the Boron–Chalcogen Mixture method was used to obtain single crystals of the previously extremely difficult to synthesize lanthanide orthothioborates to investigate their structures and their structurally connected optical behavior, such as second harmonic generation. Using a combined halide and polychalcogenide flux, the BCM method yielded single crystals of LnBS 3 (Ln = La, Ce, Pr, Nd), which are isostructural and crystallize in the non-centrosymmetric space group, Pna2 1 . Second harmonic generation measurements confirmed the expectation that LaBS 3 would exhibit a strong SHG response, measured at 1.5 × KDP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong, thermo-reversible salogels with boronate ester bonds as thermal energy storage materials

Inorganic salt hydrates are promising phase change materials (PCMs) but suffer from low viscosity at temperatures above their melting point resulting in leakage problems during thermal storage applications. To achieve shape stabilization of one type of molten inorganic PCM – calcium nitrate tetrahydrate (CNH) – this work explored gelation of polyvinyl alcohol (PVA) in this solvent and the effect of dynamic boronate ester bonds on salogel strength. The occurrence of gelation of PVA in molten CNH but not in water is rationalized by the extremely high salt content and scarcity of hydration water in CNH, enabling intermolecular hydrogen bonding between PVA chains. While neat PVA salogels in CNH were weak, with a gel-to-sol transition temperature (T gel ) below room temperature, the addition of small amounts of borax (<~0.3 wt%) introduced dynamic covalent crosslinks and yielded salogels with T gel tunable over a wide temperature range from 7 to 70 °C. Here, the PVA/borax salogels were about one order of magnitude stronger than their well-known PVA/borax hydrogel counterparts, and, unlike PVA/borax hydrogels, were capable of retaining their shape and preventing leakage of molten CNH. Moreover, the salogels exhibited reversible and repeatable temperature-triggered gel-to-sol transitions and the ability to self-heal. The low polymer and crosslinker concentration also ensured that more than 95% of the heat of fusion of neat CNH was maintained in the salogels and was retained after twenty cycles of melting and crystallization, demonstrating the robust nature of these energy storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of superconductivity in metallic boron–carbon compounds from 0 to 100 GPa by high-throughput screening

Boron–carbon compounds have been shown to have feasible superconductivity. In our earlier paper [Zheng et al., Phys. Rev. B, 2023, 107, 014508], we identified a new conventional superconductor of LiB 3 C at 100 GPa. Here, we aim to extend the investigation of possible superconductivity in this structural framework by replacing Li atoms with 27 different cations from periods 3, 4, and 5 under pressures ranging from 0 to 100 GPa. Using the high-throughput screening method of zone-center electron–phonon interaction, we found that ternary compounds like CaB 3 C, SrB 3 C, TiB 3 C, and VB 3 C are promising candidates for superconductivity. The consecutive calculations using the full Brillouin zone confirm that they have a T c of <31 K at moderate pressures. In conclusion, our study demonstrates that fast screening of superconductivity by calculating zone-center electron–phonon coupling strength is an effective strategy for high-throughput identification of new superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles elucidation of defect-mediated Li transport in hexagonal boron nitride

Hexagonal boron nitride (hBN) is a promising candidate as a protective membrane or separator in Li-ion and Li–S batteries, given its excellent chemical stability, mechanical robustness, and high thermal conductivity. In addition, hBN can be functionalized by introducing defects and dopants, or be directly integrated into other active components of batteries, which further augments its appeal to the field. Here, we use first-principles simulations to evaluate the role of atomic defects in hBN in regulating the Li-ion diffusion mechanism and associated kinetics. Specifically, the following four distinct types of vacancy defects are considered: isolated single B and N vacancies, a B–N vacancy pair, and a B 3 N vacancy cluster. It is found that these defect sites generally favor Li intercalation and out-of-plane diffusion but slow down in-plane Li-ion diffusion due to a strong Li trapping effect at the defect sites. Such a trapping effect is, however, highly local such that it does not necessarily affect the overall Li-ion conductivity in defected hBN layers. The present systematic evaluation of the impact of atomic defects on Li ion migration and accompanied charge analysis of hBN lattice in response to Li-ion diffusion provide a mechanistic understanding of Li-ion transport behavior in defected hBN and highlight the potential of defect engineering to achieve optimal material performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of a series of rare-earth-based multi-anion chalcogenide iodides RE 3 Si 2 Se x S 8− x I (RE = La, Ce, Pr, and Nd) using the flux-assisted boron–chalcogen mixture method

Single crystals and polycrystalline powders of rare earth mixed chalcogenide iodides La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, Pr 3 Si 2 Se 1.22 S 6.78 I, and Nd 3 Si 2 Se 1.18 S 6.82 I were prepared using the reactive flux-assisted boron–chalcogen mixture (BCM) method at 850 °C. All compounds crystallized in the monoclinic crystal system, space group C2/c (space group number 15). The series adopts the La 3 Si 2 O 8 Cl structure type, containing isolated SiQ 4 tetrahedra connected by REQ 8 (RE = La, Ce, Pr and Nd) polyhedra; this arrangement creates tunnels that are filled by I atoms. The partial substitution of S by Se was carried out to modulate the optical properties. Phase pure samples and uniform solid solutions were obtained for all compositions as determined using powder X-ray diffraction patterns. Polycrystalline powders were used for physical property measurements, including magnetic susceptibility and UV-Vis diffuse reflectance. The solid-state UV-Vis data for the polycrystalline La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, and Pr 3 Si 2 Se 1.22 S 6.78 I samples revealed band gaps of E g = 2.5(1), 2.2(1), and 2.3(1) eV, typical of semiconductors. Magnetic measurements indicated that Ce 3 Si 2 Se 1.39 S 6.61 I and Nd 3 Si 2 Se 1.18 S 6.82 I exhibit paramagnetic behavior with slightly negative Weiss constants θ = −25 and −38. The photoluminescence spectrum of Ce 3 Si 2 Se 1.39 S 6.61 I exhibits a broad emission band around ∼493 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boron monoxide is a one-dimensional polymer

It was recently reported that boron monoxide (BO) is formed through the cross-linking of B 4 O 2 structural building units. Multiple theoretical phases agree with this description. Using pycnometry, multidimensional 17 O NMR spectroscopy, and plane-wave DFT calculations we determined the likely polymorph to be a one-dimensional polymer initially proposed in 1955.

Thuma, Joseph F. [Iowa State Univ., Ames, IA (Unit↗

Multiscale analysis of large twist ferroelectricity and swirling dislocations in bilayer hexagonal boron nitride

With its atomically thin structure and intrinsic ferroelectric properties, heterodeformed bilayer hexagonal boron nitride (hBN) has gained prominence in next-generation non-volatile memory applications. However, studies to date have focused almost exclusively on small-twist bilayer hBN, leaving the question of whether ferroelectricity can persist under small heterostrain and large heterodeformation entirely unexplored. In this work, we establish the crystallographic origin of ferroelectricity in bilayer hBN configurations heterodeformed relative to high-symmetry configurations such as AA-stacking and 21.786789° twisted configurations (Σ7), using Smith normal form bicrystallography. We then demonstrate out-of-plane ferroelectricity in bilayer hBN across configurations vicinal to both the AA and Σ7 stackings. Atomistic simulations reveal that AA-vicinal systems support ferroelectricity under both small twist and small strain, with polarization switching in the latter governed by the deformation of swirling dislocations rather than the straight interface dislocations seen in the former. For Σ7-vicinal systems, where existing interatomic potentials underperform particularly under extreme out-of-plane compression, we develop a density-functional-theory-informed continuum framework—the bicrystallography-informed frame-invariant multiscale (BFIM) model, which captures out-of-plane ferroelectricity in heterodeformed configurations vicinal to Σ7 stacking. Interface dislocations in these large heterodeformed bilayer configurations exhibit markedly smaller Burgers vectors compared to interface dislocations in small-twist and small-strain bilayer hBN. The BFIM model reproduces experimental results and provides a powerful, computationally efficient framework for predicting ferroelectricity in large-unit-cell heterostructures where atomistic simulations are prohibitively expensive.

Ahmed, Md Tusher [Univ. of Illinois at Urbana-Cham↗

Hardness-based plasticity and fracture model for quench-hardenable boron steel (22MnB5)

A comprehensive strain hardening and fracture characterization of different grades of boron steel blanks has been performed, providing the foundation for the implementation into the modular material model (MMM) framework developed by Volkswagen Group Research for an explicit crash code. Due to the introduction of hardness-based interpolation rules for the characterized main grades, the hardening and fracture behavior is solely described by the underlying Vickers hardness. In other words, knowledge of the hardness distribution within a hot-formed component is enough to set up the newly developed computational model. The hardness distribution can be easily introduced via an experimentally measured hardness curve or via hardness mapping from a corresponding hot-forming simulation. For industrial application using rather coarse and computationally inexpensive shell element meshes, the user material model has been extended by a necking/post-necking model with reduced mesh-dependency as an additional failure mode. The present paper mainly addresses the necking/post-necking model.

36 MATERIALS SCIENCE↗

Neutron detection using boron gallium nitride semiconductor material

In this study, we developed a new neutron-detection device using a boron gallium nitride (BGaN) semiconductor in which the B atom acts as a neutron converter. BGaN and gallium nitride (GaN) samples were grown by metal organic vapor phase epitaxy, and their radiation detection properties were evaluated. GaN exhibited good sensitivity to α-rays but poor sensitivity to γ-rays. Moreover, we confirmed that electrons were generated in the depletion layer under neutron irradiation. This resulted in a neutron-detection signal after α-rays were generated by the capture of neutrons by the B atoms. These results prove that BGaN is useful as a neutron-detecting semiconductor material.

36 MATERIALS SCIENCE↗

Realization of highly efficient hexagonal boron nitride neutron detectors

Here, we report the achievement of highly efficient 10 B enriched hexagonal boron nitride (h- 10 BN) direct conversion neutron detectors. These detectors were realized from freestanding 4-in. diameter h- 10 BN wafers 43 μm in thickness obtained from epitaxy growth and subsequent mechanical separation from sapphire substrates. Both sides of the film were subjected to ohmic contact deposition to form a simple vertical “photoconductor-type” detector. Transport measurements revealed excellent vertical transport properties including high electrical resistivity (>10 13 Ω cm) and mobility-lifetime (μτ) products. A much larger μτ product for holes compared to that of electrons along the c-axis of h- BN was observed, implying that holes (electrons) behave like majority (minority) carriers in undoped h- BN. Exposure to thermal neutrons from a californium-252 ( 252 Cf) source moderated by a high density polyethylene moderator reveals that 43 μm h- 10 BN detectors possess 51.4% detection efficiency at a bias voltage of 400 V, which is the highest reported efficiency for any semiconductor-based neutron detector. The results point to the possibility of obtaining highly efficient, compact solid-state neutron detectors with high gamma rejection and low manufacturing and maintenance costs.

36 MATERIALS SCIENCE↗

Calculated electronic, transport, and related properties of zinc blende boron arsenide (zb-BAs)

Here, we present the results from ab-initio, self-consistent density functional theory (DFT) calculations of electronic, transport, and bulk properties of zinc blende boron arsenide. We utilized the local density approximation potential of Ceperley and Alder, as parameterized by Vosko and his group, the linear combination of Gaussian orbitals formalism, and the Bagayoko, Zhao, and Williams (BZW) method, as enhanced by Ekuma and Franklin (BZW-EF), in carrying out our completely self-consistent calculations. With this method, the results of our calculations have the full, physical content of density functional theory (DFT). Our results include electronic energy bands, densities of states, effective masses, and the bulk modulus. Our calculated, indirect band gap of 1.48 eV, from C to a conduction band minimum close to X, for the room temperature lattice constant of 4.777 Å, is in an excellent agreement with the experimental value of 1.46 6 0.02 eV. We thor-oughly explain the reasons for the excellent agreement between our findings and corresponding, experimental ones. This work provides a confirmation of the capability of DFT to describe accu-rately properties of materials, provides a confirmation of the capability of DFT to describe accu-rately properties of materials, if the computations adhere strictly to the conditions of validity of DFT, as done by the BZW-EF method.

36 MATERIALS SCIENCE↗