Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BUNCHES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

An Optical and Terahertz Instrumentation System at the FAST LINAC at Fermilab

FAST is a facility at Fermilab that consists of a photoinjector, two superconducting capture cavities, one superconducting ILC-style cryomodule, and a small ring for studying non-linear, integrable beam optics called IOTA. This paper discusses the layout for the optical transport system that provides optical radiation to an externally located streak camera for bunch length measurements, and THz radiation to a Martin-Puplett interferometer, also for bunch length measurements. It accepts radiation from two synchrotron radiation ports in a chicane bunch compressor and a diffraction/transition radiation screen downstream of the compressor. It also has the potential to access signal from a transition radiation screen or YAG screen after the spectrometer magnet for measurements of energy-time correlations. Initial results from both the streak camera and Martin-Puplett will be presented.

Thurman-Keup, R.↗

FEL system with homogeneous average output

A method of varying the output of a free electron laser (FEL) on very short time scales to produce a slightly broader, but smooth, time-averaged wavelength spectrum. The method includes injecting into an accelerator a sequence of bunch trains at phase offsets from crest. Accelerating the particles to full energy to result in distinct and independently controlled, by the choice of phase offset, phase-energy correlations or chirps on each bunch train. The earlier trains will be more strongly chirped, the later trains less chirped. For an energy recovered linac (ERL), the beam may be recirculated using a transport system with linear and nonlinear momentum compactions M.sub.56, which are selected to compress all three bunch trains at the FEL with higher order terms managed.

43 PARTICLE ACCELERATORS↗

Experimental Study of Beam Dynamics in the PIP-II MEBT Prototype

The Proton Improvement Plan, Stage Two (PIP-II) [1] is a program of upgrades proposed for the Fermilab injection complex, which central part is an 800 MeV, 2 mA CW SRF linac. A prototype of the PIP-II linac front end called PIP-II Injector Test (PIP2IT) is being built at Fermilab. As of now, a 15 mA DC, 30-keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CW RFQ, followed by a 10 m Medium Energy Beam Transport (MEBT) have been assembled and commissioned. The MEBT bunch-by-bunch chopping system and the requirement of a low uncontrolled beam loss put stringent limitations on the beam envelope and its variation. Measurements of transverse and longitudinal beam dynamics in the MEBT were performed in the range of 1- 10 mA of the RFQ beam current. Almost all measurements are made with 10 μs beam pulses in order to avoid damage to the beam line. This report presents measurements of the transverse optics with differential trajectories, reconstruction of the beam envelope with scrapers and an Allison emittance scanner, as well as bunch length measurements with a Fast Faraday Cup.

43 PARTICLE ACCELERATORS↗

Method for energy dither of a particle beam

A method for applying an energy dither to a charged particle beam in order to vary the wavelength of the charged particle beam. Bunches of charged particle beams are accelerated by cavities that are operated at a harmonic of the bunch repetition rate. One or more secondary radiofrequency accelerator cavities are added near the wiggler after the primary beam transport to apply a fluctuation between individual bunches with a pseudo-random distribution. The secondary radiofrequency accelerator cavities provide fine variations of the beam energy about a nominal operating point. Operating a free electron laser (FEL) with a 1% change in the electron beam energy via the secondary cavity will result in a 2% wavelength variation of the FEL output.

42 ENGINEERING↗

Energy Spread Measurements for 400 MeV Linac Beam at Fermilab Booster Using a Laser Notcher System

To mitigate 8 GeV beam losses at extraction in the Fermilab Booster synchrotron, a LASER chopper system for multiturn injection that produces a beam free gap, aka “notch” in the LINAC beam pulse at 750 keV is developed. These notches in the LINAC pulse are spaced with the 400 MeV injection revolution period of the Booster. Recently, a dedicated notching pattern that keeps a single 201 MHz LINAC bunch in the middle of a notch is developed to measure the beam energy spread by studying the time evolution of this bunch in the Booster. A method complementary to this has also been realized by injecting <2 Booster turn beam and studying the time evolution of the multiple 201 MHz LINAC bunches. In this paper we present the general principle of the method and results from our measurements.

43 PARTICLE ACCELERATORS↗

Method for energy dither of a particle beam

A method for varying the wavelength of a free electron laser (FEL) by applying an energy dither to the charged particles supplying the FEL. Bunches of charged particle beams are accelerated by cavities that are operated at a harmonic of the bunch repetition rate. The method involves adding one or more secondary radiofrequency accelerator cavities after the primary beam transport and near the wiggler to apply a fluctuation between individual bunches with a pseudo-random distribution. The secondary radiofrequency accelerator cavities provide fine variations of the beam energy about a nominal operating point. Operating a free electron laser (FEL) with a 1% change in the electron beam energy via the added secondary cavities will result in a 2% wavelength variation of the FEL output.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Damping rate limitations for transverse dampers in large hadron colliders

The paper focuses on two issues important for design and operation of bunch-by-bunch transverse damper in a very large hadron collider, where fast damping is required to suppress beam instabilities and noise induced emittance growth. The first issue is associated with kick variation along a bunch which affects the damping of head-tail modes. The second issue is associated with affect of damper noise on the instability threshold.

43 PARTICLE ACCELERATORS↗

Study of Coupler&#x27;s Effects on ILC Like Lattice

It is well known that insertion of a coupler into a rf cavity breaks the rotational symmetry of the cavity, resulting in an asymmetric field. This asymmetric field results in a transverse RF Kick. This RF kick transversely offsets the bunch from the nominal axis & it depends on the longitudinal position of the particle in the bunch. Also, insertion of coupler generates short range transverse wake field which is independent from the transverse offset of the particle. These effects cause emittance dilution and it is thus important to study their behaviour & possible correction mechanisms. These coupler effects, i.e. coupler’s RF kick & coupler's wake field are implemented in a beam dynamics program, Lucretia. Simulations are performed for main linac & bunch compressor of International Linear Collider (ILC) like lattices. Results are compared with analytical results and another beam dynamics code Placet. The good agreement has been achieved.

43 PARTICLE ACCELERATORS↗

Using Project X as a Proton Driver for Muon Colliders and Neutrino Factories

The designs of accelerator systems that will be needed to transform Fermilab's Project X [1-3] into a high-power proton driver for a muon collider and/or a neutrino factory are discussed. These applications require several megawatts of beam power delivered in tens or hundreds of short multi-GeV bunches per second, respectively. Project X may require a linac extension to higher energy for this purpose. Other major subsystems that are likely to be needed include storage rings to accumulate and shorten the proton bunches and an external beam combiner to deliver multiple bunches simultaneously to the pion production target.

43 PARTICLE ACCELERATORS↗

Longitudinal Phase Space Dynamics in ERLs

Both the dynamics and the architecture of an energy recovery linac are primarily determined by the longitudinal match. This match can be manipulated by both the magnetic lattice and the RF systems. Here we will present a few examples of systems and the longitudinal solutions found for each. The first application is a free-electron laser application where a short bunch and high peak current are required. The laser increases the energy spread and lowers the energy and this must be compensated in the ERL design. The second application is for an internal target experiment where the need was for small energy spread rather than a short bunch. The third example is for an electron cooler where the bunch must be very long with extremely small energy spread. The beam disruption due to cooling is small but CSR and microbunching effects are a real challenge. In the FEL, the longitudinal matching is mainly accomplished via lattice matching while in the cooler application the RF system is the dominant method to control the phase space. The internal target can be addressed either way.

Benson, Stephen↗

Electron Cloud Measurements in Fermilab Booster

Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilab's Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns inside the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is important to measure the presence of electron cloud. The presence or apparent absence of the electron cloud was investigated using two different methods: measuring bunch-by-bunch tune shift by changing the bunch train structure at different intensities and propagating a microwave carrier signal through the beampipe and analyzing the phase modulation of the signal. This paper presents the results of the two methods and corresponding simulation results conducted using PyECLOUD software.

43 PARTICLE ACCELERATORS↗

Collimators and beam dumps for the APS-upgrade storage ring - 25478

Argonne's Advanced Photon Source is planning a major upgrade that will increase the storage ring current from the present 100 mA to 200 mA and decrease the beam lifetime due to high charge-per-bunch and substantially smaller transverse beam size. Collimators in the horizontal plane around the storage ring will be used to control beam losses. These collimators will also serve as whole beam dumps in cases where the stored beam must be dumped for machine protection. Another feature of the Upgrade is swap-out injection, in which a stored electron bunch will be extracted to a dedicated swap-out dump when its charge falls to about 90% of the initial value and immediately replaced with a new bunch. Since particle losses will be concentrated in these collimators and beam dumps, there is the potential for high dose rates around these locations and for activation of nearby accelerator components. This paper contains a brief summary of the APS Upgrade, discusses electron losses in the storage ring, and presents calculations of dose rates and induced activity around the collimators and beam dumps. (authors)

43 PARTICLE ACCELERATORS↗

A Resonant Cavity Approach to Non-Invasive, Pulse-to-Pulse EmittanceMeasurement

We present a resonant cavity approach for non-invasive, pulse-to-pulse, beam emittance measurements of non-circular multi-bunch beams. In a resonant cavity, desired field components can be enhanced up to Q{sub L{lambda}}/{pi}, where Q{sub L{lambda}} is the loaded quality factor of the resonant mode {lambda}, when the cavity resonant mode matches the bunch frequency of a bunch-train beam pulse. In particular, a quad-cavity, with its quadrupole mode (TM{sub 220} for rectangular cavities) at beam operating frequency, rotated 45{sup o} with respect to the beamline, extracts the beam quadrupole moment exclusively, utilizing the symmetry of the cavity and some simple networks to suppress common modes. Six successive beam quadrupole moment measurements, performed at different betatron phases in a linear transport system determine the beam emittance, i.e. the beam size and shape in the beam's phase space, if the beam current and position at these points are known. In the presence of x-y beam coupling, ten measurements are required. One measurement alone provides the rms-beam size of a large aspect ratio beam. The resolution for such a measurement of rms-beam size with the rectangular quad-cavity monitor presented in this article is estimated to be on the order of ten microns. A prototype quad-cavity was fabricated and preliminary beam tests were performed at the Next Linear Collider Test Accelerator (NLCTA) at the Stanford Linear Accelerator Center (SLAC). Results were mainly limited by beam jitter and uncertainty in the beam position measurement at the cavity location. This motivated the development of a position-emittance integrated monitor.

43 PARTICLE ACCELERATORS↗

Self-Consistent Computation of Electromagnetic Fields and Phase Space Densities for Particles on Curved Planar Orbits

We discuss our progress on the self-consistent calculation of the 4D phase space density (PSD) and electromagnetic fields in a Vlasov-Maxwell formulation. We emphasize Coherent Synchrotron Radiation (CSR) from arbitrary curved planar orbits, with shielding from the vacuum chamber, but space charge forces are naturally included. Our focus on the Vlasov equation will provide simulations with lower numerical/statistical noise than standard PIC methods, and will allow the study of issues such as emittance degradation and microbunching due to space charge and CSR in bunch compressors. The fields excited by the bunch are computed in the lab frame from a new double integral formula. The field formula is derived from retarded potentials by changes of variables. It is singularity-free and requires no computation of retarded times. Ultimately, the Vlasov equation will be integrated in beam frame coordinates using our method of local characteristics. As an important intermediate step, we have developed a 'self consistent Monte Carlo algorithm', and a corresponding parallel code. This gives an accurate representation of the source and will help in understanding the PSD support. In addition we have (1) studied carefully a 2D phase space Vlasov analogue and (2) derived an improved expression of the field of a 1D charge/current distribution which accounts for the interference of different bends and other effects usually neglected. Bunch compressors will be emphasized.

43 PARTICLE ACCELERATORS↗

Commissioning Results of the LCLS Injector

The Linac Coherent Light Source (LCLS) is a SASE xray Free-Electron Laser (FEL) project presently under construction at SLAC. The injector section, from drive-laser and RF photocathode gun through first bunch compressor chicane, was installed in fall 2006. Initial system commissioning with an electron beam has recently been completed. The second phase of construction, including second bunch compressor and full linac, is planned for 2008. In this paper, we report experimental results and experience gained during the first phase of machine commissioning. This includes the cathode, drive laser, RF photocathode gun, linac booster section, S-band and X-band RF systems, first bunch compressor, and the various beam diagnostics.

43 PARTICLE ACCELERATORS↗

Dielectric Wakefield Accelerator Experiments at the SABER Facility

Electron bunches with the unparalleled combination of high charge, low emittances, and short time duration, as first produced at the SLAC Final Focus Test Beam (FFTB), are foreseen to be produced at the SABER facility. These types of bunches have enabled wakefield driven accelerating schemes of multi-GV/m in plasmas. In the context of the Dielectric Wakefield Accelerators (DWA) such beams, having rms bunch length as short as 20 um, have been used to drive 100 um and 200 um ID hollow tubes above 20 GV/m surface fields. These FFTB tests enabled the measurement of a breakdown threshold in fused silica (with full data analysis still ongoing) [1]. With the construction and commissioning of the SABER facility at SLAC, new experiments would be made possible to test further aspects of DWAs including materials, tube geometrical variations, direct measurements of the Cerenkov fields, and proof of acceleration in tubes >10 cm in length. This collaboration will investigate breakdown thresholds and accelerating fields in new materials including CVD diamond. Here we describe the experimental plans, beam parameters, simulations, and progress to date as well as future prospects for machines based of DWA structures.

36 MATERIALS SCIENCE↗

Electron Cyclotron Resonances in Electron Cloud Dynamics

We report a previously unknown resonance for electron cloud dynamics. The 2D simulation code"POSINST" was used to study the electron cloud buildup at different z positions in the International Linear Collider positron damping ring wiggler. An electron equilibrium density enhancement of up to a factor of 3 was found at magnetic field values for which the bunch frequency is an integral multiple of the electron cyclotron frequency. At low magnetic fields the effects of the resonance are prominent, but when B exceeds ~;;(2 pi mec/(elb)), with lb = bunch length, effects of the resonance disappear. Thus short bunches and low B fields are required for observing the effect. The reason for the B field dependence, an explanation of the dynamics, and the results of the 2D simulations and of a single-particle tracking code used to elucidate details of the dynamics are discussed.

43 PARTICLE ACCELERATORS↗

A FOUR-DIMENSIONAL VLASOV SOLVER FOR MICROBUNCHING INSTABILITY INTHE INJECTION SYSTEM FOR X-RAY FELS

The micro-bunching instability (MBI) is seeded by small charge-density fluctuations in the electron bunches, and is successively amplified by the combined effect of space charge and coherent synchrotron radiation, as the beam travels through magnetic compressors. The quantitative understanding of this effect demands for accurate numerical simulations. Here we report on the progress of an upgrading of a 2D Vlasov solver code toward a 4D grid-based Vlasov solver, including also the transversedynamics. The goal is to provide an accurate characterization of the MBI seeded by random noise present in the bunch distribution. We also comment on the advantages of our procedure with respect to other approaches, e.g. macroparticle simulations.

43 PARTICLE ACCELERATORS↗