Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aperture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Multifrequency synthetic aperture radar antenna comparison study

Three multifrequency, dual polarization SAR antenna designs are reviewed. The SAR antenna design specifications were for a "straw man' SAR which would approximate the requirements for projected shuttle-based SAR's. Therefore, the physical dimensions were constrained to be compatible with the space shuttle. The electrical specifications were similar to those of SIR-A and SIR-B with the addition of dual polarization and the addition of C and X band operation. Early in the antenna design considerations, three candidate technologies emerged as having promise. They were: (1) microstrip patch planar array antennas, (2) slotted waveguide planar array antennas, and (3) open-ended waveguide planar array antennas.

Blevins, B. A.↗

Solar tests of aperture plate materials for solar thermal dish collectors

In parabolic dish solar collectors, walk-off of the spot of concentrated sunlight is a hazard if a malfunction causes the concentrator to stop following the Sun. Therefore, a test program was carried out to evaluate the behavior of various ceramics, metals, and polymers under solar irradiation of about 7000 kW/sq m. (peak) for 15 minutes. The only materials that did not slump or shatter were two grades of medium-grain extruded graphite. High purity, slip-cast silica might be satisfactory at somewhat lower flux. Oxidation of the graphite appeared acceptable during tests simulating walk-off, acquisition (2000 cycles on/off Sun), and spillage (continuous on-Sun operation).

Jaffe, L. D.↗

Real-time synthetic aperture radar processing

Real-time acousto-optic SAR processors are described and experimentally demonstrated. SAR imaging is performed in one of the architectures by applying the signal to an acousto-optic device and correlating it with chirp signals recorded on an optical transparency by time integration on a CCD detector. In a different implementation, the imaging is preformed by interfering the light beams diffracted from two separate acousto-optic devices, one modulated the radar signal and the second by the reference chirp waveform.

Psaltis, D.↗

On the response to ocean surface currents in synthetic aperture radar imagery

The balance of wave action spectral density for a fixed wave-number is expressed in terms of a new dimensionless function, the degree of saturation, b, and is applied to an analysis of the variations of this quantity (and local spectral level) at wave-numbers large compared to that of the spectral peak, that are produced by variations in the ocean surface currents in the presence of wind input and wave breaking. Particular care is taken to provide physically based representations of wind input and loss by wave breaking and a relatively convenient equation is derived that specifies the distribution of the degree of saturation in a current field, relative to its ambient (undisturbed) background in the absence of currents. The magnitude of the variations in b depends on two parameters, U(o)/c, where U/(o) is the velocity scale of the current and c the phase speed of the surface waves at the (fixed) wave-number considered or sampled by SAR, and S = (L/lambda) (u*/c)(2), where L is the length scale of the current distribution, lambda the wavelength of the surface waves the length scale of the current distribution, lambda the wavelength of the surface waves and u* the friction velocity of the wind.

Phillips, O. M.↗

Parametric analysis of synthetic aperture radar data acquired over truck garden vegetation

An airborne X-band SAR acquired multipolarization and multiflight pass SAR images over a truck garden vegetation area. Based on a variety of land cover and row crop direction variations, the vertical (VV) polarization data contain the highest contrast, while cross polarization contains the least. When the radar flight path is parallel to the row direction, both horizontal (HH) and VV polarization data contain very high return which masks out the specific land cover that forms the row structure. Cross polarization data are not that sensitive to row orientation. The inclusion of like and cross polarization data help delineate special surface features (e.g., row crop against non-row-oriented land cover, very-rough-surface against highly row-oriented surface).

Wu, S. T.↗

The information content of synthetic aperture radar images of terrain

A statistical model is developed that portrays an imaging radar as a noisy communication channel with multiplicative noise, and the model is used to evaluate the average amount of information that can be extracted about a target from its radar image. The average information content is also used to define a measure of radiometric resolution for radar images. It is shown that the information content and the resolution capabilities of an imaging radar reach a limit beyond which an increase in scene dynamic range does not improve the information content or the resolution. This limitation results from the multiplicative nature of the noise introduced in the imaging process.

Frost, V. S.↗

Synthetic aperture radar imaging using acousto-optics and charge-coupled devices

The operating principles of an acoustooptic/CCD real-time SAR processor are described, and experimental results are presented. Particular consideration is given to time-and-space integrating processing, the range processor, and the azimuth processor. The interferometric detection scheme is examined in detail.

Psaltis, D.↗

An aperture synthesis map of HCN emission close to W3 IRS 4

W3 has been observed in the J = 1-0 transition of HCN with the millimeter-wave interferometer at the Hat Creek Observatory with a resolution of 11.5 by 11.1 arcsec. The HCN emission is detected in an isolated cloud with a diameter of 40 arcsec. The cloud is located to the south of IRS 4 and the compact H II region C and coincides with the western far-IR cloud mapped at 400 microns by Jaffe (1983). The total mass of the cloud is estimated to be in the range 250-2500 solar masses. No HCN emission was detected around IRS 5, the location of the other 400 micron peak. Also, no evidence for a new (heretofore undetected at other wavelengths), young main-sequence star earlier than B0 was found in the new continuum map at 3 mm.

Wright, M. C. H.↗

Compensating for Range Migration in Synthetic-Aperture Radar

Correlation algorithm sharpens radar imagery. Azimuthal correlation of point-target response performed in frequency domain by fast Fourier transforms relatively efficient in arithmetic operations. Frequencydomain azimuthal response has simple form that enables correction for range migration made simultaneously and over wide area, thereby providing many picture elements.

Jin, M. Y.↗

Point Simulator for Synthetic-Aperture Radar

Reflection from point target imitated electronically. SAR simulator produces amplitude- and phase-modulated 60-MHz signal that resembles SAR return of point scatterer. Designed to test integrated optical SAR receivers, simulator applies phase modulation necessary to turn radio-frequency pulse train into electronic equivalent of unfocused radar image of target.

Psaltis, D.↗

Feed System Design Considerations for Large Space Antenna Systems. Part 2: Single Aperture with Overlapping Feeds

Contiguous multiple beams are used to make use of the set of frequency bands at different beams at different geographical locations and achieve the most efficient use of precious frequency allocation. This is feasible only if the interference among cochannel beams is below some acceptable level, by carrier/interference (C/I) ratio. Individual beam patterns of very low sidelobes, which in turn necessitates narrow feed are required. A physically realizable solution to this problem entails either more than one reflector, more complicated optics, or breaking of each feed into a cluster of smaller elements, some of which would then be shared by adjacent beams. The latter, however, requires a complicated beamforming network (BFN) for the proper feeding of the elements. The feedpacking problem is not unique to reflector antennas and exists in lens type antennas as well. The BFN and associated problems are present in the phased array antennas and on a much larger scale. Poor scan capabilities are associated with reflector systems. The scan properties of offset fed reflector systems can be improved by choosing a very large focal length to parent reflector diameter ((F/Dp) ratio, which requires a longer boom to support the feed. In the case of reflectors with cluster feed arrangements, the scan capability for smaller F/Dp ratios is improved by proper adjustment of cluster element excitations. Such a system seems to be appropriate for up to 10 beamwidths scan. For a larger number of beams, systems with wider scan capabilities, such as phased arrays or phased array/reflector combinations, become more appealing.

Jamnejad, V.↗

The absolute amplitude calibration of the SEASAT synthetic aperture radar - An intercomparison with other L-band radar systems

The absolute amplitude calibration of the spaceborne Seasat SAR data set is presented based on previous relative calibration studies. A scale factor making it possible to express the perceived radar brightness of a scene in units of sigma-zero is established. The system components are analyzed for error contribution, and the calibration techniques are introduced for each stage. These include: A/D converter saturation tests; prevention of clipping in the processing step; and converting the digital image into the units of received power. Experimental verification was performed by screening and processing the data of the lava flow surrounding the Pisgah Crater in Southern California, for which previous C-130 airborne scatterometer data were available. The average backscatter difference between the two data sets is estimated to be 2 dB in the brighter, and 4 dB in the dimmer regions. For the SAR a calculated uncertainty of 3 dB is expected.

Held, D.↗

Analysis of Synthetic Aperture Radar data acquired over a variety of land cover

An analysis has been conducted of two-look-angle, multipolarization X-band SAR results. On the basis of the variety of land covers studied, the vertical-vertical polarization (VV) data is judged to contain the highest degree of contrast, while the horizontal-vertical (HV) polarization contained the least. VV polarization data is accordingly recommended for forest vegetation classification in those cases where only one data channel is available. The inclusion of horizontal-horizontal polarization data, however, is noted to be capable of delineating special surface features.

Wu, S. T.↗

Predicting dangerous ocean waves with spaceborne synthetic aperture radar

It is pointed out that catastrophes, related to the occurrence of strong winds and large ocean waves, can consume more lives and property than most naval battles. The generation of waves by wind are considered, Pierson et al. (1955) have incorporated statistical concepts into a wave forecast model. The concept of an 'ocean wave spectrum' was introduced, with the wind acting independently on each Fourier component. However, even after 30 years of research and debate, the generation, propagation, and dissipation of the spectrum under arbitrary conditions continue to be controversial. It has now been found that spaceborne SAR has a surprising ability to precisely monitor spatially evolving wind and wave fields. Approaches to overcome certain weaknesses of the SAR method are discussed, taking into account the second Shuttle Imaging Radar experiment, and a possible long-term solution provided by Spectrasat. Spectrasat should be a low-altitude (200 to 250 km) satellite with active drag compensation.

Beal, R. C.↗

Coherent optical system of modular imaging collectors (COSMIC) - An approach for a large aperture high angular resolution telescope in space

Very high angular resolution can be achieved in UV/optical astronomy through interferometers in space. A concept analysis of COSMIC, which may be placed into orbit by the Space Shuttle in the late 1990's, is discussed. The photon-collecting area is three times larger than that of Space Telescope (ST), and exceeds its resolution by approximately an order of magnitude. Several alternative configurations are presented to scope the extent of design approaches which may be achievable within the transportation capability of the Space Shuttle.

Davis, B.↗

Method and apparatus for contour mapping using synthetic aperture radar

By using two SAR antennas spaced a known distance, B, and oriented at substantially the same look angle to illuminate the same target area, pixel data from the two antennas may be compared in phase to determine a difference delta phi from which a slant angle theta is determined for each pixel point from an equation Delta phi = (2 pi B/lambda)sin(theta - alpha), where lambda is the radar wavelength and alpha is the roll angle of the aircraft. The height, h, of each pixel point from the aircraft is determined from the equation h = R cos theta, and from the known altitude, a, of the aircraft above sea level, the altitude (elevation), a', of each point is determined from the difference a - h. This elevation data may be displayed with the SAR image by, for example, quantizing the elevation at increments of 100 feet starting at sea level, and color coding pixels of the same quantized elevation. The distance, d, of each pixel from the ground track of the aircraft used for the display may be determined more accurately from the equation d = R sin theta.

Goldstein, R. M.↗